! Started logfile: J2212-2518_S_2017_07_09_pus_uvs.log on Wed May 8 14:58:47 2019 obs J2212-2518_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2212-2518_S_2017_07_09_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.925926 visibilities/baseline/integration-bin. ! Found source: J2212-2518 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 16000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2212-2518_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 649 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995091Jy sigma=0.007387 ! Fit after self-cal, rms=0.953042Jy sigma=0.007081 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=7.129 mas, bpa=-9.163 degrees ! Estimated noise=1334.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0393554 Jy ! Component: 100 - total flux cleaned = 0.0480364 Jy ! Total flux subtracted in 100 components = 0.0480364 Jy ! Clean residual min=-0.004340 max=0.003836 Jy/beam ! Clean residual mean=0.000001 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.0480364 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0480364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092400Jy sigma=0.000651 ! Fit after self-cal, rms=0.091149Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=8.193 mas, bpa=-6.548 degrees ! Estimated noise=932.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438902 Jy ! Component: 100 - total flux cleaned = 0.00594934 Jy ! Component: 150 - total flux cleaned = 0.00634223 Jy ! Component: 200 - total flux cleaned = 0.00637237 Jy ! Total flux subtracted in 200 components = 0.00637237 Jy ! Clean residual min=-0.002473 max=0.003019 Jy/beam ! Clean residual mean=0.000006 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.0544088 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.0544088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090930Jy sigma=0.000641 ! Fit after self-cal, rms=0.090888Jy sigma=0.000641 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 0.96 KP 1.08 ! LA 1.03 MK 1.15 NL 0.95 OV 1.05 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.92 KP 1.00 ! LA 0.98 MK 1.03 NL 1.06 OV 1.06 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.88 KP 1.02 ! LA 0.98 MK 1.08 NL 0.96 OV 1.01 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.82 KP 1.00* ! LA 1.00* MK 0.79 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.090888Jy sigma=0.000641 ! Fit after self-cal, rms=0.090087Jy sigma=0.000640 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=8.224 mas, bpa=-6.475 degrees ! Estimated noise=929.073 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035729 Jy ! Component: 100 - total flux cleaned = 0.000399969 Jy ! Component: 150 - total flux cleaned = 0.000436692 Jy ! Component: 200 - total flux cleaned = 0.000452737 Jy ! Total flux subtracted in 200 components = 0.000452737 Jy ! Clean residual min=-0.002281 max=0.002579 Jy/beam ! Clean residual mean=0.000006 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0548616 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 0.0548615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090079Jy sigma=0.000640 ! Fit after self-cal, rms=0.090031Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090031Jy sigma=0.000640 ! Fit after self-cal, rms=0.090173Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.219 mas, bpa=-6.291 degrees ! Estimated noise=934.594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633681 Jy ! Component: 100 - total flux cleaned = 0.000684213 Jy ! Component: 150 - total flux cleaned = 0.000698926 Jy ! Component: 200 - total flux cleaned = 0.000712224 Jy ! Total flux subtracted in 200 components = 0.000712224 Jy ! Clean residual min=-0.002229 max=0.002655 Jy/beam ! Clean residual mean=0.000006 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0555738 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0555738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090166Jy sigma=0.000639 ! Fit after self-cal, rms=0.090149Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-96, -64). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162165 Jy ! Component: 100 - total flux cleaned = 0.00188597 Jy ! Component: 150 - total flux cleaned = 0.00196717 Jy ! Component: 200 - total flux cleaned = 0.00196805 Jy ! Total flux subtracted in 200 components = 0.00196805 Jy ! Clean residual min=-0.002204 max=0.002189 Jy/beam ! Clean residual mean=0.000006 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0575418 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.0575418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090079Jy sigma=0.000639 ! Fit after self-cal, rms=0.090056Jy sigma=0.000638 ! Inverting map ! Added new window around map position (24.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233616 Jy ! Component: 100 - total flux cleaned = 0.00288183 Jy ! Component: 150 - total flux cleaned = 0.00296469 Jy ! Component: 200 - total flux cleaned = 0.00303245 Jy ! Total flux subtracted in 200 components = 0.00303245 Jy ! Clean residual min=-0.002209 max=0.001974 Jy/beam ! Clean residual mean=0.000008 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0605743 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 0.0605743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089985Jy sigma=0.000638 ! Fit after self-cal, rms=0.089960Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089960Jy sigma=0.000638 ! Fit after self-cal, rms=0.088726Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.979 mas, bmaj=8.159 mas, bpa=-6.154 degrees ! Estimated noise=922.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164175 Jy ! Component: 100 - total flux cleaned = 0.00186142 Jy ! Component: 150 - total flux cleaned = 0.00186221 Jy ! Component: 200 - total flux cleaned = 0.00183025 Jy ! Total flux subtracted in 200 components = 0.00183025 Jy ! Clean residual min=-0.002068 max=0.002076 Jy/beam ! Clean residual mean=0.000005 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0624045 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.0624045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088685Jy sigma=0.000637 ! Fit after self-cal, rms=0.088680Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101816 Jy ! Component: 100 - total flux cleaned = 0.000983192 Jy ! Component: 150 - total flux cleaned = 0.000952134 Jy ! Component: 200 - total flux cleaned = 0.000923821 Jy ! Total flux subtracted in 200 components = 0.000923821 Jy ! Clean residual min=-0.002067 max=0.002050 Jy/beam ! Clean residual mean=0.000006 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0633283 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.0633283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088653Jy sigma=0.000637 ! Fit after self-cal, rms=0.088642Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088642Jy sigma=0.000637 ! Fit after self-cal, rms=0.088408Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.258 mas, bmaj=18.18 mas, bpa=-2.186 degrees ! Estimated noise=1204.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106045 Jy ! Component: 100 - total flux cleaned = 0.00139336 Jy ! Component: 150 - total flux cleaned = 0.00152403 Jy ! Component: 200 - total flux cleaned = 0.00165235 Jy ! Total flux subtracted in 200 components = 0.00165235 Jy ! Clean residual min=-0.002597 max=0.001873 Jy/beam ! Clean residual mean=0.000012 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.0649807 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.0649807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088402Jy sigma=0.000637 ! Fit after self-cal, rms=0.088377Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544646 Jy ! Component: 100 - total flux cleaned = 0.000688291 Jy ! Component: 150 - total flux cleaned = 0.000719182 Jy ! Component: 200 - total flux cleaned = 0.0007606 Jy ! Total flux subtracted in 200 components = 0.0007606 Jy ! Clean residual min=-0.002378 max=0.001777 Jy/beam ! Clean residual mean=0.000012 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0657413 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 96 components and 0.0657413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088373Jy sigma=0.000636 ! Fit after self-cal, rms=0.088366Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=8.133 mas, bpa=-6.044 degrees ! Estimated noise=918.454 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 8.133 at -6.044 degrees (North through East) ! Clean map min=-0.0020802 max=0.052113 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=7.111 mas, bpa=-8.887 degrees ! Estimated noise=1315.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402395 Jy ! Component: 100 - total flux cleaned = 0.049935 Jy ! Component: 150 - total flux cleaned = 0.0553521 Jy ! Component: 200 - total flux cleaned = 0.0585417 Jy ! Total flux subtracted in 200 components = 0.0585417 Jy ! Clean residual min=-0.003454 max=0.003498 Jy/beam ! Clean residual mean=0.000002 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.0585417 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0585417 Jy ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=8.133 mas, bpa=-6.044 degrees ! Estimated noise=918.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268178 Jy ! Component: 100 - total flux cleaned = 0.00395982 Jy ! Component: 150 - total flux cleaned = 0.00463719 Jy ! Component: 200 - total flux cleaned = 0.00515192 Jy ! Total flux subtracted in 200 components = 0.00515192 Jy ! Clean residual min=-0.002551 max=0.002117 Jy/beam ! Clean residual mean=0.000006 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0636936 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 37 components and 0.0636937 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.258 mas, bmaj=18.18 mas, bpa=-2.186 degrees ! Estimated noise=1204.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001061 Jy ! Component: 100 - total flux cleaned = 0.00131494 Jy ! Component: 150 - total flux cleaned = 0.001551 Jy ! Component: 200 - total flux cleaned = 0.00177568 Jy ! Total flux subtracted in 200 components = 0.00177568 Jy ! Clean residual min=-0.002483 max=0.001935 Jy/beam ! Clean residual mean=0.000012 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0654693 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189938 Jy ! Component: 100 - total flux cleaned = 0.000292599 Jy ! Component: 150 - total flux cleaned = 0.00038317 Jy ! Component: 200 - total flux cleaned = 0.000447562 Jy ! Total flux subtracted in 200 components = 0.000447562 Jy ! Clean residual min=-0.002415 max=0.001802 Jy/beam ! Clean residual mean=0.000012 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0659169 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 69 components and 0.0659169 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=8.133 mas, bpa=-6.044 degrees ! Estimated noise=918.454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233643 Jy ! Component: 100 - total flux cleaned = -0.000109758 Jy ! Component: 150 - total flux cleaned = -0.000112093 Jy ! Component: 200 - total flux cleaned = -0.000144253 Jy ! Total flux subtracted in 200 components = -0.000144253 Jy ! Clean residual min=-0.002248 max=0.002083 Jy/beam ! Clean residual mean=0.000006 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.0657727 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 83 components and 0.0657727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088373Jy sigma=0.000636 ! Fit after self-cal, rms=0.088368Jy sigma=0.000636 wmodel J2212-2518_S_2017_07_09_pus_map.mod ! Writing 83 model components to file: J2212-2518_S_2017_07_09_pus_map.mod wobs J2212-2518_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2212-2518_S_2017_07_09_pus_uvs.fits wwins J2212-2518_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J2212-2518_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202027 Jy ! Component: 100 - total flux cleaned = 0.000746827 Jy ! Component: 150 - total flux cleaned = 0.000974619 Jy ! Component: 200 - total flux cleaned = 0.0011619 Jy ! Component: 250 - total flux cleaned = 0.00128258 Jy ! Component: 300 - total flux cleaned = 0.00148632 Jy ! Component: 350 - total flux cleaned = 0.00171235 Jy ! Component: 400 - total flux cleaned = 0.00193252 Jy ! Component: 450 - total flux cleaned = 0.00209372 Jy ! Component: 500 - total flux cleaned = 0.00230302 Jy ! Component: 550 - total flux cleaned = 0.00250705 Jy ! Component: 600 - total flux cleaned = 0.002607 Jy ! Component: 650 - total flux cleaned = 0.00270508 Jy ! Component: 700 - total flux cleaned = 0.00277757 Jy ! Component: 750 - total flux cleaned = 0.00296726 Jy ! Component: 800 - total flux cleaned = 0.00310661 Jy ! Component: 850 - total flux cleaned = 0.00322068 Jy ! Component: 900 - total flux cleaned = 0.00326562 Jy ! Component: 950 - total flux cleaned = 0.00328785 Jy ! Component: 1000 - total flux cleaned = 0.00330996 Jy ! Component: 1050 - total flux cleaned = 0.00335309 Jy ! Component: 1100 - total flux cleaned = 0.0033742 Jy ! Component: 1150 - total flux cleaned = 0.00337445 Jy ! Component: 1200 - total flux cleaned = 0.00337465 Jy ! Component: 1250 - total flux cleaned = 0.00333435 Jy ! Component: 1300 - total flux cleaned = 0.00329457 Jy ! Component: 1350 - total flux cleaned = 0.00325539 Jy ! Component: 1400 - total flux cleaned = 0.0031973 Jy ! Component: 1450 - total flux cleaned = 0.00314012 Jy ! Component: 1500 - total flux cleaned = 0.00308355 Jy ! Component: 1550 - total flux cleaned = 0.0031208 Jy ! Component: 1600 - total flux cleaned = 0.00312048 Jy ! Component: 1650 - total flux cleaned = 0.00310177 Jy ! Component: 1700 - total flux cleaned = 0.00304741 Jy ! Component: 1750 - total flux cleaned = 0.00304739 Jy ! Component: 1800 - total flux cleaned = 0.00304735 Jy ! Component: 1850 - total flux cleaned = 0.00297827 Jy ! Component: 1900 - total flux cleaned = 0.00301296 Jy ! Component: 1950 - total flux cleaned = 0.00306346 Jy ! Component: 2000 - total flux cleaned = 0.00309678 Jy ! Component: 2050 - total flux cleaned = 0.00308017 Jy ! Component: 2100 - total flux cleaned = 0.00306384 Jy ! Component: 2150 - total flux cleaned = 0.00306422 Jy ! Component: 2200 - total flux cleaned = 0.00306419 Jy ! Component: 2250 - total flux cleaned = 0.00308015 Jy ! Component: 2300 - total flux cleaned = 0.00309606 Jy ! Component: 2350 - total flux cleaned = 0.00309614 Jy ! Component: 2400 - total flux cleaned = 0.00309634 Jy ! Component: 2450 - total flux cleaned = 0.00309653 Jy ! Component: 2500 - total flux cleaned = 0.00311185 Jy ! Component: 2550 - total flux cleaned = 0.00314166 Jy ! Component: 2600 - total flux cleaned = 0.00314163 Jy ! Component: 2650 - total flux cleaned = 0.003171 Jy ! Component: 2700 - total flux cleaned = 0.00318548 Jy ! Component: 2750 - total flux cleaned = 0.0032288 Jy ! Component: 2800 - total flux cleaned = 0.00325727 Jy ! Component: 2850 - total flux cleaned = 0.003243 Jy ! Component: 2900 - total flux cleaned = 0.00327117 Jy ! Component: 2950 - total flux cleaned = 0.00332684 Jy ! Component: 3000 - total flux cleaned = 0.0033129 Jy ! Component: 3050 - total flux cleaned = 0.00332654 Jy ! Component: 3100 - total flux cleaned = 0.00335391 Jy ! Component: 3150 - total flux cleaned = 0.00342139 Jy ! Component: 3200 - total flux cleaned = 0.00340789 Jy ! Component: 3250 - total flux cleaned = 0.00343439 Jy ! Component: 3300 - total flux cleaned = 0.00344758 Jy ! Component: 3350 - total flux cleaned = 0.00344763 Jy ! Component: 3400 - total flux cleaned = 0.0035124 Jy ! Component: 3450 - total flux cleaned = 0.0035509 Jy ! Component: 3500 - total flux cleaned = 0.00356365 Jy ! Component: 3550 - total flux cleaned = 0.00356366 Jy ! Component: 3600 - total flux cleaned = 0.00360141 Jy ! Component: 3650 - total flux cleaned = 0.00365128 Jy ! Component: 3700 - total flux cleaned = 0.00363882 Jy ! Component: 3750 - total flux cleaned = 0.0036511 Jy ! Component: 3800 - total flux cleaned = 0.00367553 Jy ! Component: 3850 - total flux cleaned = 0.00362714 Jy ! Component: 3900 - total flux cleaned = 0.00368746 Jy ! Component: 3950 - total flux cleaned = 0.00365151 Jy ! Component: 4000 - total flux cleaned = 0.00367509 Jy ! Component: 4050 - total flux cleaned = 0.00366323 Jy ! Total flux subtracted in 4096 components = 0.00362799 Jy ! Clean residual min=-0.000605 max=0.000789 Jy/beam ! Clean residual mean=0.000003 rms=0.000215 Jy/beam ! Combined flux in latest and established models = 0.0694006 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 356 components and 0.0694007 Jy ![Exited script file: muppet] wmap "J2212-2518_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 8.133 at -6.044 degrees (North through East) ! Clean map min=-0.0016535 max=0.051488 Jy/beam ! Writing clean map to FITS file: J2212-2518_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0514884 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210884 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22873 1.22873 2.45746 4.91492 9.82984 19.6597 39.3194 78.6387 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 8.133 at -6.044 degrees (North through East) ! Clean map min=-0.0016535 max=0.051488 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212-2518_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:58:52 2019