! Started logfile: J2212+2355_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:24:11 2019 obs J2212+2355_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2212+2355_S_2017_01_16_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.648148 visibilities/baseline/integration-bin. ! Found source: J2212+2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 2800 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2212+2355_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.503494Jy sigma=0.002986 ! Fit after self-cal, rms=0.498238Jy sigma=0.002943 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.583 mas, bmaj=7.253 mas, bpa=18.72 degrees ! Estimated noise=2173.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.517781 Jy ! Component: 100 - total flux cleaned = 0.630691 Jy ! Total flux subtracted in 100 components = 0.630691 Jy ! Clean residual min=-0.027140 max=0.041379 Jy/beam ! Clean residual mean=0.000040 rms=0.008018 Jy/beam ! Combined flux in latest and established models = 0.630691 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.630691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362440Jy sigma=0.001309 ! Fit after self-cal, rms=0.362447Jy sigma=0.001309 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.195 mas, bmaj=8.149 mas, bpa=19.9 degrees ! Estimated noise=1822.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01391 Jy ! Component: 100 - total flux cleaned = 0.0150414 Jy ! Component: 150 - total flux cleaned = 0.0168902 Jy ! Component: 200 - total flux cleaned = 0.018045 Jy ! Total flux subtracted in 200 components = 0.018045 Jy ! Clean residual min=-0.025079 max=0.041789 Jy/beam ! Clean residual mean=0.000104 rms=0.008027 Jy/beam ! Combined flux in latest and established models = 0.648736 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.648736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360906Jy sigma=0.001259 ! Fit after self-cal, rms=0.360893Jy sigma=0.001259 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 0.95 KP 0.96 ! LA 0.97 MK 1.00* NL 0.86 OV 0.93 ! PT 1.30 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.00 KP 0.93 ! LA 0.93 MK 1.00* NL 0.99 OV 0.94 ! PT 1.30 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.98 HN 0.97 KP 0.97 ! LA 0.94 MK 1.00* NL 0.99 OV 0.87 ! PT 1.33 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.01 KP 1.00* ! LA 0.90 MK 1.00* NL 1.00* OV 0.87 ! PT 1.41 SC 1.62 ! ! ! Fit before self-cal, rms=0.360893Jy sigma=0.001259 ! Fit after self-cal, rms=0.401062Jy sigma=0.001036 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.181 mas, bmaj=8.138 mas, bpa=19.4 degrees ! Estimated noise=1801.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171449 Jy ! Component: 100 - total flux cleaned = 0.00107312 Jy ! Component: 150 - total flux cleaned = 0.000922708 Jy ! Component: 200 - total flux cleaned = 0.00117804 Jy ! Total flux subtracted in 200 components = 0.00117804 Jy ! Clean residual min=-0.019601 max=0.023754 Jy/beam ! Clean residual mean=0.000185 rms=0.006076 Jy/beam ! Combined flux in latest and established models = 0.649914 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.649914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400609Jy sigma=0.001032 ! Fit after self-cal, rms=0.400986Jy sigma=0.001032 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.400986Jy sigma=0.001032 ! Fit after self-cal, rms=0.284006Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.16 mas, bmaj=8.121 mas, bpa=19.06 degrees ! Estimated noise=1820.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00861559 Jy ! Component: 100 - total flux cleaned = 0.0124761 Jy ! Component: 150 - total flux cleaned = 0.0145403 Jy ! Component: 200 - total flux cleaned = 0.0157791 Jy ! Total flux subtracted in 200 components = 0.0157791 Jy ! Clean residual min=-0.006063 max=0.006947 Jy/beam ! Clean residual mean=0.000040 rms=0.001665 Jy/beam ! Combined flux in latest and established models = 0.665693 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 0.665693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283478Jy sigma=0.000707 ! Fit after self-cal, rms=0.284017Jy sigma=0.000706 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000791769 Jy ! Component: 100 - total flux cleaned = 0.000878885 Jy ! Component: 150 - total flux cleaned = 0.000977668 Jy ! Component: 200 - total flux cleaned = 0.00104658 Jy ! Total flux subtracted in 200 components = 0.00104658 Jy ! Clean residual min=-0.006054 max=0.006837 Jy/beam ! Clean residual mean=0.000041 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.66674 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.66674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283976Jy sigma=0.000706 ! Fit after self-cal, rms=0.283980Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283980Jy sigma=0.000706 ! Fit after self-cal, rms=0.224246Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.153 mas, bmaj=8.112 mas, bpa=18.89 degrees ! Estimated noise=1819.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209688 Jy ! Component: 100 - total flux cleaned = 0.0023396 Jy ! Component: 150 - total flux cleaned = 0.0023793 Jy ! Component: 200 - total flux cleaned = 0.00238048 Jy ! Total flux subtracted in 200 components = 0.00238048 Jy ! Clean residual min=-0.004742 max=0.004278 Jy/beam ! Clean residual mean=0.000002 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.669121 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.66912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224216Jy sigma=0.000651 ! Fit after self-cal, rms=0.224066Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67974e-05 Jy ! Component: 100 - total flux cleaned = -1.02607e-05 Jy ! Component: 150 - total flux cleaned = 1.42453e-05 Jy ! Component: 200 - total flux cleaned = 1.38813e-05 Jy ! Total flux subtracted in 200 components = 1.38813e-05 Jy ! Clean residual min=-0.004734 max=0.004249 Jy/beam ! Clean residual mean=0.000002 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.669134 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.669134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224053Jy sigma=0.000651 ! Fit after self-cal, rms=0.224055Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224055Jy sigma=0.000651 ! Fit after self-cal, rms=0.224028Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.755 mas, bmaj=9.818 mas, bpa=8.363 degrees ! Estimated noise=2194.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001318 Jy ! Component: 100 - total flux cleaned = 0.00142564 Jy ! Component: 150 - total flux cleaned = 0.00142485 Jy ! Component: 200 - total flux cleaned = 0.00144419 Jy ! Total flux subtracted in 200 components = 0.00144419 Jy ! Clean residual min=-0.004862 max=0.004734 Jy/beam ! Clean residual mean=0.000002 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.670579 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.670579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223990Jy sigma=0.000651 ! Fit after self-cal, rms=0.224001Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.87584e-05 Jy ! Component: 100 - total flux cleaned = 8.31612e-06 Jy ! Component: 150 - total flux cleaned = 8.73621e-06 Jy ! Component: 200 - total flux cleaned = 8.73014e-06 Jy ! Total flux subtracted in 200 components = 8.73014e-06 Jy ! Clean residual min=-0.004847 max=0.004743 Jy/beam ! Clean residual mean=0.000002 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.670587 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 66 components and 0.670587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223981Jy sigma=0.000651 ! Fit after self-cal, rms=0.223984Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.15 mas, bmaj=8.108 mas, bpa=18.84 degrees ! Estimated noise=1819.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.15 x 8.108 at 18.84 degrees (North through East) ! Clean map min=-0.0044272 max=0.65825 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223984Jy sigma=0.000651 ! Fit after self-cal, rms=0.227493Jy sigma=0.000605 ! Inverting map and beam ! Estimated beam: bmin=4.147 mas, bmaj=8.108 mas, bpa=18.85 degrees ! Estimated noise=1820.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104007 Jy ! Component: 100 - total flux cleaned = 0.00134116 Jy ! Component: 150 - total flux cleaned = 0.00148018 Jy ! Component: 200 - total flux cleaned = 0.00160181 Jy ! Total flux subtracted in 200 components = 0.00160181 Jy ! Clean residual min=-0.004487 max=0.004465 Jy/beam ! Clean residual mean=0.000004 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.672189 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 0.672189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227512Jy sigma=0.000605 ! Fit after self-cal, rms=0.227511Jy sigma=0.000605 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.46396e-05 Jy ! Component: 100 - total flux cleaned = 0.00010368 Jy ! Component: 150 - total flux cleaned = 0.000140454 Jy ! Component: 200 - total flux cleaned = 0.000175196 Jy ! Total flux subtracted in 200 components = 0.000175196 Jy ! Clean residual min=-0.004488 max=0.004438 Jy/beam ! Clean residual mean=0.000004 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.672364 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 74 components and 0.672364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227513Jy sigma=0.000605 ! Fit after self-cal, rms=0.227515Jy sigma=0.000605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227515Jy sigma=0.000605 ! Fit after self-cal, rms=0.227653Jy sigma=0.000605 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.559 mas, bmaj=7.251 mas, bpa=17.54 degrees ! Estimated noise=2150.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.511968 Jy ! Component: 100 - total flux cleaned = 0.623629 Jy ! Component: 150 - total flux cleaned = 0.650909 Jy ! Component: 200 - total flux cleaned = 0.661655 Jy ! Total flux subtracted in 200 components = 0.661655 Jy ! Clean residual min=-0.007316 max=0.006127 Jy/beam ! Clean residual mean=-0.000006 rms=0.001577 Jy/beam ! Combined flux in latest and established models = 0.661655 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.661655 Jy ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=8.104 mas, bpa=18.82 degrees ! Estimated noise=1820.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434813 Jy ! Component: 100 - total flux cleaned = 0.00594488 Jy ! Component: 150 - total flux cleaned = 0.00624912 Jy ! Component: 200 - total flux cleaned = 0.00670953 Jy ! Total flux subtracted in 200 components = 0.00670953 Jy ! Clean residual min=-0.004689 max=0.004314 Jy/beam ! Clean residual mean=0.000003 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.668364 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 24 components and 0.668364 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.744 mas, bmaj=9.815 mas, bpa=8.372 degrees ! Estimated noise=2198.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256894 Jy ! Component: 100 - total flux cleaned = 0.00359486 Jy ! Component: 150 - total flux cleaned = 0.00369059 Jy ! Component: 200 - total flux cleaned = 0.00378012 Jy ! Total flux subtracted in 200 components = 0.00378012 Jy ! Clean residual min=-0.005428 max=0.004840 Jy/beam ! Clean residual mean=0.000006 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 0.672145 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.03294e-05 Jy ! Component: 100 - total flux cleaned = 0.000116353 Jy ! Component: 150 - total flux cleaned = 0.00018492 Jy ! Component: 200 - total flux cleaned = 0.00018481 Jy ! Total flux subtracted in 200 components = 0.00018481 Jy ! Clean residual min=-0.005384 max=0.004745 Jy/beam ! Clean residual mean=0.000006 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 0.672329 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 53 components and 0.67233 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.146 mas, bmaj=8.104 mas, bpa=18.82 degrees ! Estimated noise=1820.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000636583 Jy ! Component: 100 - total flux cleaned = -0.000798678 Jy ! Component: 150 - total flux cleaned = -0.000944031 Jy ! Component: 200 - total flux cleaned = -0.00113112 Jy ! Total flux subtracted in 200 components = -0.00113112 Jy ! Clean residual min=-0.004847 max=0.003963 Jy/beam ! Clean residual mean=0.000003 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.671198 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.671199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227631Jy sigma=0.000604 ! Fit after self-cal, rms=0.227643Jy sigma=0.000604 wmodel J2212+2355_S_2017_01_16_pus_map.mod ! Writing 64 model components to file: J2212+2355_S_2017_01_16_pus_map.mod wobs J2212+2355_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2212+2355_S_2017_01_16_pus_uvs.fits wwins J2212+2355_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2212+2355_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209483 Jy ! Component: 100 - total flux cleaned = -0.00361111 Jy ! Component: 150 - total flux cleaned = -0.00488595 Jy ! Component: 200 - total flux cleaned = -0.00603012 Jy ! Component: 250 - total flux cleaned = -0.00674543 Jy ! Component: 300 - total flux cleaned = -0.00724927 Jy ! Component: 350 - total flux cleaned = -0.00773989 Jy ! Component: 400 - total flux cleaned = -0.0079798 Jy ! Component: 450 - total flux cleaned = -0.00845083 Jy ! Component: 500 - total flux cleaned = -0.00873843 Jy ! Component: 550 - total flux cleaned = -0.00907654 Jy ! Component: 600 - total flux cleaned = -0.00924241 Jy ! Component: 650 - total flux cleaned = -0.00935008 Jy ! Component: 700 - total flux cleaned = -0.0092969 Jy ! Component: 750 - total flux cleaned = -0.00940189 Jy ! Component: 800 - total flux cleaned = -0.00945437 Jy ! Component: 850 - total flux cleaned = -0.0097583 Jy ! Component: 900 - total flux cleaned = -0.00980715 Jy ! Component: 950 - total flux cleaned = -0.0100536 Jy ! Component: 1000 - total flux cleaned = -0.0101507 Jy ! Component: 1050 - total flux cleaned = -0.0102 Jy ! Component: 1100 - total flux cleaned = -0.0103905 Jy ! Component: 1150 - total flux cleaned = -0.010437 Jy ! Component: 1200 - total flux cleaned = -0.010483 Jy ! Component: 1250 - total flux cleaned = -0.0105289 Jy ! Component: 1300 - total flux cleaned = -0.0105736 Jy ! Component: 1350 - total flux cleaned = -0.0105738 Jy ! Component: 1400 - total flux cleaned = -0.0107067 Jy ! Component: 1450 - total flux cleaned = -0.0106194 Jy ! Component: 1500 - total flux cleaned = -0.0106204 Jy ! Component: 1550 - total flux cleaned = -0.0107492 Jy ! Component: 1600 - total flux cleaned = -0.0107493 Jy ! Component: 1650 - total flux cleaned = -0.0107075 Jy ! Component: 1700 - total flux cleaned = -0.0107485 Jy ! Component: 1750 - total flux cleaned = -0.0107078 Jy ! Component: 1800 - total flux cleaned = -0.0106267 Jy ! Component: 1850 - total flux cleaned = -0.0107481 Jy ! Component: 1900 - total flux cleaned = -0.0107078 Jy ! Component: 1950 - total flux cleaned = -0.0106286 Jy ! Component: 2000 - total flux cleaned = -0.0106286 Jy ! Component: 2050 - total flux cleaned = -0.0104343 Jy ! Component: 2100 - total flux cleaned = -0.0105501 Jy ! Component: 2150 - total flux cleaned = -0.0105882 Jy ! Component: 2200 - total flux cleaned = -0.0104742 Jy ! Component: 2250 - total flux cleaned = -0.0104371 Jy ! Component: 2300 - total flux cleaned = -0.0104373 Jy ! Component: 2350 - total flux cleaned = -0.0104743 Jy ! Component: 2400 - total flux cleaned = -0.0105478 Jy ! Component: 2450 - total flux cleaned = -0.0104745 Jy ! Component: 2500 - total flux cleaned = -0.0103293 Jy ! Component: 2550 - total flux cleaned = -0.0102575 Jy ! Component: 2600 - total flux cleaned = -0.0101501 Jy ! Component: 2650 - total flux cleaned = -0.0102211 Jy ! Component: 2700 - total flux cleaned = -0.0101857 Jy ! Component: 2750 - total flux cleaned = -0.0100801 Jy ! Component: 2800 - total flux cleaned = -0.0100451 Jy ! Component: 2850 - total flux cleaned = -0.00997572 Jy ! Component: 2900 - total flux cleaned = -0.00994112 Jy ! Component: 2950 - total flux cleaned = -0.00990705 Jy ! Component: 3000 - total flux cleaned = -0.00997503 Jy ! Component: 3050 - total flux cleaned = -0.00987379 Jy ! Component: 3100 - total flux cleaned = -0.00984035 Jy ! Component: 3150 - total flux cleaned = -0.00984049 Jy ! Component: 3200 - total flux cleaned = -0.009741 Jy ! Component: 3250 - total flux cleaned = -0.00967527 Jy ! Component: 3300 - total flux cleaned = -0.00960972 Jy ! Component: 3350 - total flux cleaned = -0.00954445 Jy ! Component: 3400 - total flux cleaned = -0.00941512 Jy ! Component: 3450 - total flux cleaned = -0.00938289 Jy ! Component: 3500 - total flux cleaned = -0.0093184 Jy ! Component: 3550 - total flux cleaned = -0.00919102 Jy ! Component: 3600 - total flux cleaned = -0.009096 Jy ! Component: 3650 - total flux cleaned = -0.00906432 Jy ! Component: 3700 - total flux cleaned = -0.00893907 Jy ! Component: 3750 - total flux cleaned = -0.0089078 Jy ! Component: 3800 - total flux cleaned = -0.00875304 Jy ! Component: 3850 - total flux cleaned = -0.00875296 Jy ! Component: 3900 - total flux cleaned = -0.00859957 Jy ! Component: 3950 - total flux cleaned = -0.00850784 Jy ! Component: 4000 - total flux cleaned = -0.00835611 Jy ! Component: 4050 - total flux cleaned = -0.00829591 Jy ! Total flux subtracted in 4096 components = -0.00826598 Jy ! Clean residual min=-0.002246 max=0.002239 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.662933 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 340 components and 0.662933 Jy ![Exited script file: muppet] wmap "J2212+2355_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.146 x 8.104 at 18.82 degrees (North through East) ! Clean map min=-0.0040298 max=0.65654 Jy/beam ! Writing clean map to FITS file: J2212+2355_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.656544 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000567218 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259184 0.259184 0.518368 1.03674 2.07347 4.14694 8.29388 16.5878 33.1755 66.3511 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.656 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.146 x 8.104 at 18.82 degrees (North through East) ! Clean map min=-0.0040298 max=0.65654 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2212+2355_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:24:16 2019