! Started logfile: J2210+2013_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:24:06 2019 obs J2210+2013_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2210+2013_S_2017_01_16_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.644444 visibilities/baseline/integration-bin. ! Found source: J2210+2013 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 16472 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2210+2013_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 275 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 643 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945051Jy sigma=0.007490 ! Fit after self-cal, rms=0.925600Jy sigma=0.007394 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=7.534 mas, bpa=19.32 degrees ! Estimated noise=1189.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0820797 Jy ! Component: 100 - total flux cleaned = 0.0999998 Jy ! Total flux subtracted in 100 components = 0.0999998 Jy ! Clean residual min=-0.003758 max=0.005027 Jy/beam ! Clean residual mean=0.000004 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0999998 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0999998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249713Jy sigma=0.000657 ! Fit after self-cal, rms=0.249703Jy sigma=0.000657 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=8.042 mas, bpa=17.02 degrees ! Estimated noise=747.318 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038272 Jy ! Component: 100 - total flux cleaned = 0.00474422 Jy ! Component: 150 - total flux cleaned = 0.00518974 Jy ! Component: 200 - total flux cleaned = 0.005402 Jy ! Total flux subtracted in 200 components = 0.005402 Jy ! Clean residual min=-0.003286 max=0.003298 Jy/beam ! Clean residual mean=0.000009 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.105402 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.105402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249596Jy sigma=0.000655 ! Fit after self-cal, rms=0.249580Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.99 KP 1.01 ! LA 0.98 MK 1.00* NL 0.89 OV 0.96 ! PT 1.13 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.99 KP 0.98 ! LA 0.98 MK 1.00* NL 0.99 OV 1.00 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.98 HN 1.00 KP 1.00 ! LA 0.97 MK 1.00* NL 1.02 OV 0.91 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 0.95 KP 1.00* ! LA 0.99 MK 1.00* NL 1.00* OV 0.96 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.249580Jy sigma=0.000655 ! Fit after self-cal, rms=0.247682Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=8.057 mas, bpa=16.77 degrees ! Estimated noise=743.195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110505 Jy ! Component: 100 - total flux cleaned = -0.000408218 Jy ! Component: 150 - total flux cleaned = -0.00060255 Jy ! Component: 200 - total flux cleaned = -0.000621737 Jy ! Total flux subtracted in 200 components = -0.000621737 Jy ! Clean residual min=-0.002998 max=0.002686 Jy/beam ! Clean residual mean=0.000013 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.10478 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.10478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247657Jy sigma=0.000652 ! Fit after self-cal, rms=0.247834Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247834Jy sigma=0.000652 ! Fit after self-cal, rms=0.104135Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=8.068 mas, bpa=16.47 degrees ! Estimated noise=743.381 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000433908 Jy ! Component: 100 - total flux cleaned = 0.000313134 Jy ! Component: 150 - total flux cleaned = 0.000254185 Jy ! Component: 200 - total flux cleaned = 0.000265222 Jy ! Total flux subtracted in 200 components = 0.000265222 Jy ! Clean residual min=-0.001754 max=0.002084 Jy/beam ! Clean residual mean=-0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.105045 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 0.105045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104128Jy sigma=0.000647 ! Fit after self-cal, rms=0.104045Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22.5, 123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174394 Jy ! Component: 100 - total flux cleaned = 0.0018828 Jy ! Component: 150 - total flux cleaned = 0.00190382 Jy ! Component: 200 - total flux cleaned = 0.00192106 Jy ! Total flux subtracted in 200 components = 0.00192106 Jy ! Clean residual min=-0.001629 max=0.001773 Jy/beam ! Clean residual mean=-0.000004 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.106966 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 55 components and 0.106966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104014Jy sigma=0.000646 ! Fit after self-cal, rms=0.104007Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104007Jy sigma=0.000646 ! Fit after self-cal, rms=0.104669Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=8.067 mas, bpa=16.3 degrees ! Estimated noise=741.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497753 Jy ! Component: 100 - total flux cleaned = 0.000520969 Jy ! Component: 150 - total flux cleaned = 0.000589173 Jy ! Component: 200 - total flux cleaned = 0.000604443 Jy ! Total flux subtracted in 200 components = 0.000604443 Jy ! Clean residual min=-0.001664 max=0.001687 Jy/beam ! Clean residual mean=-0.000005 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.107571 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 0.107571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104661Jy sigma=0.000646 ! Fit after self-cal, rms=0.104646Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000105421 Jy ! Component: 100 - total flux cleaned = 9.26727e-05 Jy ! Component: 150 - total flux cleaned = 5.5159e-05 Jy ! Component: 200 - total flux cleaned = 3.22338e-05 Jy ! Total flux subtracted in 200 components = 3.22338e-05 Jy ! Clean residual min=-0.001660 max=0.001717 Jy/beam ! Clean residual mean=-0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.107603 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.107603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104643Jy sigma=0.000646 ! Fit after self-cal, rms=0.104640Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104640Jy sigma=0.000646 ! Fit after self-cal, rms=0.104584Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.45 mas, bmaj=9.944 mas, bpa=4.171 degrees ! Estimated noise=900.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.45514e-06 Jy ! Component: 100 - total flux cleaned = -1.03161e-05 Jy ! Component: 150 - total flux cleaned = -7.5012e-05 Jy ! Component: 200 - total flux cleaned = -0.000106063 Jy ! Total flux subtracted in 200 components = -0.000106063 Jy ! Clean residual min=-0.002217 max=0.002084 Jy/beam ! Clean residual mean=-0.000009 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.107497 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 88 components and 0.107497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104585Jy sigma=0.000646 ! Fit after self-cal, rms=0.104578Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40844e-05 Jy ! Component: 100 - total flux cleaned = 2.47341e-05 Jy ! Component: 150 - total flux cleaned = -7.69469e-07 Jy ! Component: 200 - total flux cleaned = -8.50004e-06 Jy ! Total flux subtracted in 200 components = -8.50004e-06 Jy ! Clean residual min=-0.002204 max=0.002054 Jy/beam ! Clean residual mean=-0.000009 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.107488 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 100 components and 0.107488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104579Jy sigma=0.000646 ! Fit after self-cal, rms=0.104577Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=8.064 mas, bpa=16.22 degrees ! Estimated noise=741.648 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.073 x 8.064 at 16.22 degrees (North through East) ! Clean map min=-0.0016206 max=0.10433 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=7.547 mas, bpa=18.4 degrees ! Estimated noise=1098.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0812684 Jy ! Component: 100 - total flux cleaned = 0.0991402 Jy ! Component: 150 - total flux cleaned = 0.1031 Jy ! Component: 200 - total flux cleaned = 0.104056 Jy ! Total flux subtracted in 200 components = 0.104056 Jy ! Clean residual min=-0.002521 max=0.002912 Jy/beam ! Clean residual mean=-0.000001 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.104056 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.104056 Jy ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=8.064 mas, bpa=16.22 degrees ! Estimated noise=741.648 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141488 Jy ! Component: 100 - total flux cleaned = 0.00214584 Jy ! Component: 150 - total flux cleaned = 0.00262469 Jy ! Component: 200 - total flux cleaned = 0.00285411 Jy ! Total flux subtracted in 200 components = 0.00285411 Jy ! Clean residual min=-0.001732 max=0.001805 Jy/beam ! Clean residual mean=-0.000006 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.10691 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 24 components and 0.10691 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.45 mas, bmaj=9.944 mas, bpa=4.171 degrees ! Estimated noise=900.345 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000467573 Jy ! Component: 100 - total flux cleaned = 0.000517151 Jy ! Component: 150 - total flux cleaned = 0.000498961 Jy ! Component: 200 - total flux cleaned = 0.000500937 Jy ! Total flux subtracted in 200 components = 0.000500937 Jy ! Clean residual min=-0.002234 max=0.002065 Jy/beam ! Clean residual mean=-0.000009 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.107411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.46743e-07 Jy ! Component: 100 - total flux cleaned = 9.36413e-07 Jy ! Component: 150 - total flux cleaned = 1.16743e-05 Jy ! Component: 200 - total flux cleaned = 1.32925e-06 Jy ! Total flux subtracted in 200 components = 1.32925e-06 Jy ! Clean residual min=-0.002218 max=0.002015 Jy/beam ! Clean residual mean=-0.000009 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.107413 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 59 components and 0.107413 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.073 mas, bmaj=8.064 mas, bpa=16.22 degrees ! Estimated noise=741.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.17621e-05 Jy ! Component: 100 - total flux cleaned = -1.61727e-05 Jy ! Component: 150 - total flux cleaned = -5.69548e-05 Jy ! Component: 200 - total flux cleaned = -9.06249e-05 Jy ! Total flux subtracted in 200 components = -9.06249e-05 Jy ! Clean residual min=-0.001683 max=0.001689 Jy/beam ! Clean residual mean=-0.000005 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.107322 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 82 components and 0.107322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104583Jy sigma=0.000646 ! Fit after self-cal, rms=0.104577Jy sigma=0.000646 wmodel J2210+2013_S_2017_01_16_pus_map.mod ! Writing 82 model components to file: J2210+2013_S_2017_01_16_pus_map.mod wobs J2210+2013_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2210+2013_S_2017_01_16_pus_uvs.fits wwins J2210+2013_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2210+2013_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.34698e-05 Jy ! Component: 100 - total flux cleaned = 3.27602e-05 Jy ! Component: 150 - total flux cleaned = 3.34793e-05 Jy ! Component: 200 - total flux cleaned = 0.000139795 Jy ! Component: 250 - total flux cleaned = 0.000190579 Jy ! Component: 300 - total flux cleaned = 0.000313946 Jy ! Component: 350 - total flux cleaned = 0.00038541 Jy ! Component: 400 - total flux cleaned = 0.000478359 Jy ! Component: 450 - total flux cleaned = 0.000567985 Jy ! Component: 500 - total flux cleaned = 0.00058994 Jy ! Component: 550 - total flux cleaned = 0.000675394 Jy ! Component: 600 - total flux cleaned = 0.000716781 Jy ! Component: 650 - total flux cleaned = 0.000797745 Jy ! Component: 700 - total flux cleaned = 0.000896557 Jy ! Component: 750 - total flux cleaned = 0.00101299 Jy ! Component: 800 - total flux cleaned = 0.00108905 Jy ! Component: 850 - total flux cleaned = 0.00116334 Jy ! Component: 900 - total flux cleaned = 0.00127403 Jy ! Component: 950 - total flux cleaned = 0.0013829 Jy ! Component: 1000 - total flux cleaned = 0.00147225 Jy ! Component: 1050 - total flux cleaned = 0.00157814 Jy ! Component: 1100 - total flux cleaned = 0.00166516 Jy ! Component: 1150 - total flux cleaned = 0.00178508 Jy ! Component: 1200 - total flux cleaned = 0.00193662 Jy ! Component: 1250 - total flux cleaned = 0.00198659 Jy ! Component: 1300 - total flux cleaned = 0.00203602 Jy ! Component: 1350 - total flux cleaned = 0.00213352 Jy ! Component: 1400 - total flux cleaned = 0.00216575 Jy ! Component: 1450 - total flux cleaned = 0.00229291 Jy ! Component: 1500 - total flux cleaned = 0.00233983 Jy ! Component: 1550 - total flux cleaned = 0.0024484 Jy ! Component: 1600 - total flux cleaned = 0.00243324 Jy ! Component: 1650 - total flux cleaned = 0.00247896 Jy ! Component: 1700 - total flux cleaned = 0.00250906 Jy ! Component: 1750 - total flux cleaned = 0.00256838 Jy ! Component: 1800 - total flux cleaned = 0.00261248 Jy ! Component: 1850 - total flux cleaned = 0.00265618 Jy ! Component: 1900 - total flux cleaned = 0.00271376 Jy ! Component: 1950 - total flux cleaned = 0.002728 Jy ! Component: 2000 - total flux cleaned = 0.00277049 Jy ! Component: 2050 - total flux cleaned = 0.00279847 Jy ! Component: 2100 - total flux cleaned = 0.00285409 Jy ! Component: 2150 - total flux cleaned = 0.00293668 Jy ! Component: 2200 - total flux cleaned = 0.0029503 Jy ! Component: 2250 - total flux cleaned = 0.00297737 Jy ! Component: 2300 - total flux cleaned = 0.00297748 Jy ! Component: 2350 - total flux cleaned = 0.00303081 Jy ! Component: 2400 - total flux cleaned = 0.00304418 Jy ! Component: 2450 - total flux cleaned = 0.00309664 Jy ! Component: 2500 - total flux cleaned = 0.00310951 Jy ! Component: 2550 - total flux cleaned = 0.00316094 Jy ! Component: 2600 - total flux cleaned = 0.0031864 Jy ! Component: 2650 - total flux cleaned = 0.00323729 Jy ! Component: 2700 - total flux cleaned = 0.00324978 Jy ! Component: 2750 - total flux cleaned = 0.00327471 Jy ! Component: 2800 - total flux cleaned = 0.00332413 Jy ! Component: 2850 - total flux cleaned = 0.00336087 Jy ! Component: 2900 - total flux cleaned = 0.00336108 Jy ! Component: 2950 - total flux cleaned = 0.00334892 Jy ! Component: 3000 - total flux cleaned = 0.00336093 Jy ! Component: 3050 - total flux cleaned = 0.00337298 Jy ! Component: 3100 - total flux cleaned = 0.0033611 Jy ! Component: 3150 - total flux cleaned = 0.00336116 Jy ! Component: 3200 - total flux cleaned = 0.00337281 Jy ! Component: 3250 - total flux cleaned = 0.00332609 Jy ! Component: 3300 - total flux cleaned = 0.00332607 Jy ! Component: 3350 - total flux cleaned = 0.00330303 Jy ! Component: 3400 - total flux cleaned = 0.0033717 Jy ! Component: 3450 - total flux cleaned = 0.00329188 Jy ! Component: 3500 - total flux cleaned = 0.00329197 Jy ! Component: 3550 - total flux cleaned = 0.00329199 Jy ! Component: 3600 - total flux cleaned = 0.00328073 Jy ! Component: 3650 - total flux cleaned = 0.00328073 Jy ! Component: 3700 - total flux cleaned = 0.003314 Jy ! Component: 3750 - total flux cleaned = 0.00328083 Jy ! Component: 3800 - total flux cleaned = 0.00329182 Jy ! Component: 3850 - total flux cleaned = 0.00332457 Jy ! Component: 3900 - total flux cleaned = 0.0033246 Jy ! Component: 3950 - total flux cleaned = 0.00336778 Jy ! Component: 4000 - total flux cleaned = 0.00335697 Jy ! Component: 4050 - total flux cleaned = 0.00337839 Jy ! Total flux subtracted in 4096 components = 0.00338899 Jy ! Clean residual min=-0.000678 max=0.000661 Jy/beam ! Clean residual mean=-0.000000 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.110711 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 383 components and 0.110711 Jy ![Exited script file: muppet] wmap "J2210+2013_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.073 x 8.064 at 16.22 degrees (North through East) ! Clean map min=-0.0013575 max=0.10433 Jy/beam ! Writing clean map to FITS file: J2210+2013_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104332 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201222 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.578602 0.578602 1.1572 2.31441 4.62882 9.25764 18.5153 37.0306 74.0611 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.073 x 8.064 at 16.22 degrees (North through East) ! Clean map min=-0.0013575 max=0.10433 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2210+2013_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:24:11 2019