! Started logfile: J2208+1808_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:31 2019 obs J2208+1808_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2208+1808_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.578544 visibilities/baseline/integration-bin. ! Found source: J2208+1808 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9664 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2208+1808_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 513 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 823 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917540Jy sigma=0.008509 ! Fit after self-cal, rms=0.903704Jy sigma=0.008400 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.275 mas, bmaj=10.28 mas, bpa=-9.965 degrees ! Estimated noise=1334.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0746787 Jy ! Component: 100 - total flux cleaned = 0.091023 Jy ! Total flux subtracted in 100 components = 0.091023 Jy ! Clean residual min=-0.004334 max=0.005967 Jy/beam ! Clean residual mean=-0.000003 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.091023 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.091023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076960Jy sigma=0.000661 ! Fit after self-cal, rms=0.076931Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=11.2 mas, bpa=-10.86 degrees ! Estimated noise=978.641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702316 Jy ! Component: 100 - total flux cleaned = 0.00984809 Jy ! Component: 150 - total flux cleaned = 0.0102782 Jy ! Component: 200 - total flux cleaned = 0.010374 Jy ! Total flux subtracted in 200 components = 0.010374 Jy ! Clean residual min=-0.003899 max=0.003868 Jy/beam ! Clean residual mean=-0.000000 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.101397 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 21 components and 0.101397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076224Jy sigma=0.000657 ! Fit after self-cal, rms=0.076217Jy sigma=0.000656 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 0.95 KP 1.05 ! LA 1.02 MK 0.98 NL 0.94 OV 1.00* ! PT 1.03 ! ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.04 KP 1.12 ! LA 1.01 MK 0.94 NL 1.24 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.04 HN 1.05 KP 0.90 ! LA 0.81 MK 1.03 NL 1.11 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.06 KP 1.00* ! LA 1.00* MK 1.01 NL 1.00* OV 1.00* ! PT 0.90 ! ! ! Fit before self-cal, rms=0.076217Jy sigma=0.000656 ! Fit after self-cal, rms=0.074302Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.806 mas, bmaj=11.39 mas, bpa=-10.61 degrees ! Estimated noise=983.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113741 Jy ! Component: 100 - total flux cleaned = -0.00144048 Jy ! Component: 150 - total flux cleaned = -0.00151962 Jy ! Component: 200 - total flux cleaned = -0.0015666 Jy ! Total flux subtracted in 200 components = -0.0015666 Jy ! Clean residual min=-0.003208 max=0.003222 Jy/beam ! Clean residual mean=-0.000001 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0998305 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.0998305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074275Jy sigma=0.000653 ! Fit after self-cal, rms=0.074278Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074278Jy sigma=0.000652 ! Fit after self-cal, rms=0.075025Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.807 mas, bmaj=11.33 mas, bpa=-10.76 degrees ! Estimated noise=981.119 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147244 Jy ! Component: 100 - total flux cleaned = 0.00016828 Jy ! Component: 150 - total flux cleaned = 0.000185144 Jy ! Component: 200 - total flux cleaned = 0.000198526 Jy ! Total flux subtracted in 200 components = 0.000198526 Jy ! Clean residual min=-0.002300 max=0.001915 Jy/beam ! Clean residual mean=0.000003 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.100029 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.100029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075016Jy sigma=0.000648 ! Fit after self-cal, rms=0.075100Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215243 Jy ! Component: 100 - total flux cleaned = -0.000234019 Jy ! Component: 150 - total flux cleaned = -0.000234094 Jy ! Component: 200 - total flux cleaned = -0.000241768 Jy ! Total flux subtracted in 200 components = -0.000241768 Jy ! Clean residual min=-0.002324 max=0.001870 Jy/beam ! Clean residual mean=0.000002 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0997872 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0997872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075098Jy sigma=0.000648 ! Fit after self-cal, rms=0.075098Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075098Jy sigma=0.000648 ! Fit after self-cal, rms=0.075353Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=11.32 mas, bpa=-10.8 degrees ! Estimated noise=981.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.80002e-05 Jy ! Component: 100 - total flux cleaned = -6.78289e-05 Jy ! Component: 150 - total flux cleaned = -7.71546e-05 Jy ! Component: 200 - total flux cleaned = -9.3134e-05 Jy ! Total flux subtracted in 200 components = -9.3134e-05 Jy ! Clean residual min=-0.002342 max=0.001937 Jy/beam ! Clean residual mean=0.000004 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0996941 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.0996941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075350Jy sigma=0.000648 ! Fit after self-cal, rms=0.075362Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.32136e-05 Jy ! Component: 100 - total flux cleaned = -6.52297e-05 Jy ! Component: 150 - total flux cleaned = -8.66689e-05 Jy ! Component: 200 - total flux cleaned = -0.000100053 Jy ! Total flux subtracted in 200 components = -0.000100053 Jy ! Clean residual min=-0.002342 max=0.001923 Jy/beam ! Clean residual mean=0.000004 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.099594 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.099594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075361Jy sigma=0.000648 ! Fit after self-cal, rms=0.075361Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075361Jy sigma=0.000648 ! Fit after self-cal, rms=0.075451Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.502 mas, bmaj=11.39 mas, bpa=-16.06 degrees ! Estimated noise=1164.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270621 Jy ! Component: 100 - total flux cleaned = -0.000305695 Jy ! Component: 150 - total flux cleaned = -0.000328405 Jy ! Component: 200 - total flux cleaned = -0.000355835 Jy ! Total flux subtracted in 200 components = -0.000355835 Jy ! Clean residual min=-0.002719 max=0.002197 Jy/beam ! Clean residual mean=0.000009 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0992382 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 57 components and 0.0992382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075449Jy sigma=0.000648 ! Fit after self-cal, rms=0.075451Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.99871e-05 Jy ! Component: 100 - total flux cleaned = -7.09026e-05 Jy ! Component: 150 - total flux cleaned = -7.70336e-05 Jy ! Component: 200 - total flux cleaned = -8.25143e-05 Jy ! Total flux subtracted in 200 components = -8.25143e-05 Jy ! Clean residual min=-0.002735 max=0.002186 Jy/beam ! Clean residual mean=0.000009 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0991557 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.0991557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075451Jy sigma=0.000648 ! Fit after self-cal, rms=0.075450Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=11.31 mas, bpa=-10.82 degrees ! Estimated noise=982.076 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.818 x 11.31 at -10.82 degrees (North through East) ! Clean map min=-0.0022779 max=0.09768 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=10.32 mas, bpa=-10.21 degrees ! Estimated noise=1360.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755967 Jy ! Component: 100 - total flux cleaned = 0.0921825 Jy ! Component: 150 - total flux cleaned = 0.0972246 Jy ! Component: 200 - total flux cleaned = 0.0986312 Jy ! Total flux subtracted in 200 components = 0.0986312 Jy ! Clean residual min=-0.002971 max=0.002609 Jy/beam ! Clean residual mean=0.000003 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0986312 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0986312 Jy ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=11.31 mas, bpa=-10.82 degrees ! Estimated noise=982.076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065542 Jy ! Component: 100 - total flux cleaned = 0.000656659 Jy ! Component: 150 - total flux cleaned = 0.000652535 Jy ! Component: 200 - total flux cleaned = 0.000649838 Jy ! Total flux subtracted in 200 components = 0.000649838 Jy ! Clean residual min=-0.002373 max=0.001867 Jy/beam ! Clean residual mean=0.000004 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0992811 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 36 components and 0.0992811 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.502 mas, bmaj=11.39 mas, bpa=-16.06 degrees ! Estimated noise=1164.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.47375e-05 Jy ! Component: 100 - total flux cleaned = 2.44164e-05 Jy ! Component: 150 - total flux cleaned = 2.43315e-05 Jy ! Component: 200 - total flux cleaned = 1.04767e-05 Jy ! Total flux subtracted in 200 components = 1.04767e-05 Jy ! Clean residual min=-0.002677 max=0.002120 Jy/beam ! Clean residual mean=0.000009 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0992915 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.31437e-05 Jy ! Component: 100 - total flux cleaned = -3.4117e-05 Jy ! Component: 150 - total flux cleaned = -5.37862e-05 Jy ! Component: 200 - total flux cleaned = -6.28649e-05 Jy ! Total flux subtracted in 200 components = -6.28649e-05 Jy ! Clean residual min=-0.002696 max=0.002119 Jy/beam ! Clean residual mean=0.000009 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0992287 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.0992287 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=11.31 mas, bpa=-10.82 degrees ! Estimated noise=982.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245948 Jy ! Component: 100 - total flux cleaned = 0.000233983 Jy ! Component: 150 - total flux cleaned = 0.000233976 Jy ! Component: 200 - total flux cleaned = 0.000212825 Jy ! Total flux subtracted in 200 components = 0.000212825 Jy ! Clean residual min=-0.002333 max=0.001917 Jy/beam ! Clean residual mean=0.000004 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0994415 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0994415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075458Jy sigma=0.000648 ! Fit after self-cal, rms=0.075458Jy sigma=0.000648 wmodel J2208+1808_S_2017_10_09_pus_map.mod ! Writing 61 model components to file: J2208+1808_S_2017_10_09_pus_map.mod wobs J2208+1808_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2208+1808_S_2017_10_09_pus_uvs.fits wwins J2208+1808_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2208+1808_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000854656 Jy ! Component: 100 - total flux cleaned = -0.000824349 Jy ! Component: 150 - total flux cleaned = -0.000578671 Jy ! Component: 200 - total flux cleaned = -0.000324152 Jy ! Component: 250 - total flux cleaned = -8.37442e-05 Jy ! Component: 300 - total flux cleaned = -8.05262e-06 Jy ! Component: 350 - total flux cleaned = 6.34779e-05 Jy ! Component: 400 - total flux cleaned = 6.21313e-05 Jy ! Component: 450 - total flux cleaned = -4.65721e-06 Jy ! Component: 500 - total flux cleaned = -2.64699e-05 Jy ! Component: 550 - total flux cleaned = -8.84127e-05 Jy ! Component: 600 - total flux cleaned = -0.000187474 Jy ! Component: 650 - total flux cleaned = -0.000283759 Jy ! Component: 700 - total flux cleaned = -0.000359104 Jy ! Component: 750 - total flux cleaned = -0.000450514 Jy ! Component: 800 - total flux cleaned = -0.00053935 Jy ! Component: 850 - total flux cleaned = -0.000539486 Jy ! Component: 900 - total flux cleaned = -0.000573397 Jy ! Component: 950 - total flux cleaned = -0.000606274 Jy ! Component: 1000 - total flux cleaned = -0.000670914 Jy ! Component: 1050 - total flux cleaned = -0.000702533 Jy ! Component: 1100 - total flux cleaned = -0.000748613 Jy ! Component: 1150 - total flux cleaned = -0.000869694 Jy ! Component: 1200 - total flux cleaned = -0.000944162 Jy ! Component: 1250 - total flux cleaned = -0.00100273 Jy ! Component: 1300 - total flux cleaned = -0.00107448 Jy ! Component: 1350 - total flux cleaned = -0.00106004 Jy ! Component: 1400 - total flux cleaned = -0.00110178 Jy ! Component: 1450 - total flux cleaned = -0.00111554 Jy ! Component: 1500 - total flux cleaned = -0.00111566 Jy ! Component: 1550 - total flux cleaned = -0.00114225 Jy ! Component: 1600 - total flux cleaned = -0.0011422 Jy ! Component: 1650 - total flux cleaned = -0.00116778 Jy ! Component: 1700 - total flux cleaned = -0.00118055 Jy ! Component: 1750 - total flux cleaned = -0.00116839 Jy ! Component: 1800 - total flux cleaned = -0.00121765 Jy ! Component: 1850 - total flux cleaned = -0.0011935 Jy ! Component: 1900 - total flux cleaned = -0.00119368 Jy ! Component: 1950 - total flux cleaned = -0.00119374 Jy ! Component: 2000 - total flux cleaned = -0.00118211 Jy ! Component: 2050 - total flux cleaned = -0.00117062 Jy ! Component: 2100 - total flux cleaned = -0.00117066 Jy ! Component: 2150 - total flux cleaned = -0.00117065 Jy ! Component: 2200 - total flux cleaned = -0.00120384 Jy ! Component: 2250 - total flux cleaned = -0.00123653 Jy ! Component: 2300 - total flux cleaned = -0.00125804 Jy ! Component: 2350 - total flux cleaned = -0.0012368 Jy ! Component: 2400 - total flux cleaned = -0.00121581 Jy ! Component: 2450 - total flux cleaned = -0.00126776 Jy ! Component: 2500 - total flux cleaned = -0.00128844 Jy ! Component: 2550 - total flux cleaned = -0.00132925 Jy ! Component: 2600 - total flux cleaned = -0.00136974 Jy ! Component: 2650 - total flux cleaned = -0.00142995 Jy ! Component: 2700 - total flux cleaned = -0.00145967 Jy ! Component: 2750 - total flux cleaned = -0.00149918 Jy ! Component: 2800 - total flux cleaned = -0.00150895 Jy ! Component: 2850 - total flux cleaned = -0.00150902 Jy ! Component: 2900 - total flux cleaned = -0.00154774 Jy ! Component: 2950 - total flux cleaned = -0.00157654 Jy ! Component: 3000 - total flux cleaned = -0.00157656 Jy ! Component: 3050 - total flux cleaned = -0.00159564 Jy ! Component: 3100 - total flux cleaned = -0.00161451 Jy ! Component: 3150 - total flux cleaned = -0.00161455 Jy ! Component: 3200 - total flux cleaned = -0.00166105 Jy ! Component: 3250 - total flux cleaned = -0.0016795 Jy ! Component: 3300 - total flux cleaned = -0.00168868 Jy ! Component: 3350 - total flux cleaned = -0.00172532 Jy ! Component: 3400 - total flux cleaned = -0.00174355 Jy ! Component: 3450 - total flux cleaned = -0.00177986 Jy ! Component: 3500 - total flux cleaned = -0.00178887 Jy ! Component: 3550 - total flux cleaned = -0.00181584 Jy ! Component: 3600 - total flux cleaned = -0.00184278 Jy ! Component: 3650 - total flux cleaned = -0.00186065 Jy ! Component: 3700 - total flux cleaned = -0.00187843 Jy ! Component: 3750 - total flux cleaned = -0.00190508 Jy ! Component: 3800 - total flux cleaned = -0.00190511 Jy ! Component: 3850 - total flux cleaned = -0.00193155 Jy ! Component: 3900 - total flux cleaned = -0.00195796 Jy ! Component: 3950 - total flux cleaned = -0.00201056 Jy ! Component: 4000 - total flux cleaned = -0.00198427 Jy ! Component: 4050 - total flux cleaned = -0.00200178 Jy ! Total flux subtracted in 4096 components = -0.00202794 Jy ! Clean residual min=-0.000523 max=0.000605 Jy/beam ! Clean residual mean=-0.000001 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0974135 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 356 components and 0.0974136 Jy ![Exited script file: muppet] wmap "J2208+1808_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.818 x 11.31 at -10.82 degrees (North through East) ! Clean map min=-0.0011672 max=0.097593 Jy/beam ! Writing clean map to FITS file: J2208+1808_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0975928 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000152003 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.467256 0.467256 0.934512 1.86902 3.73805 7.4761 14.9522 29.9044 59.8088 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.097 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.818 x 11.31 at -10.82 degrees (North through East) ! Clean map min=-0.0011672 max=0.097593 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2208+1808_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:36 2019