! Started logfile: J2208+1808_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:23:55 2019 obs J2208+1808_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2208+1808_S_2017_01_16_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.723388 visibilities/baseline/integration-bin. ! Found source: J2208+1808 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 18620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2208+1808_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 207 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 536 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948193Jy sigma=0.007513 ! Fit after self-cal, rms=0.925959Jy sigma=0.007420 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=7.652 mas, bpa=18.57 degrees ! Estimated noise=1045.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0659181 Jy ! Component: 100 - total flux cleaned = 0.0802996 Jy ! Total flux subtracted in 100 components = 0.0802996 Jy ! Clean residual min=-0.003668 max=0.004042 Jy/beam ! Clean residual mean=0.000005 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0802996 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0802996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148587Jy sigma=0.000655 ! Fit after self-cal, rms=0.148534Jy sigma=0.000655 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.123 mas, bmaj=8.13 mas, bpa=16.59 degrees ! Estimated noise=717.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138166 Jy ! Component: 100 - total flux cleaned = 0.00134576 Jy ! Component: 150 - total flux cleaned = 0.00127852 Jy ! Component: 200 - total flux cleaned = 0.00125158 Jy ! Total flux subtracted in 200 components = 0.00125158 Jy ! Clean residual min=-0.002303 max=0.003070 Jy/beam ! Clean residual mean=0.000005 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0815512 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 13 components and 0.0815512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148440Jy sigma=0.000654 ! Fit after self-cal, rms=0.148442Jy sigma=0.000654 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.98 KP 0.99 ! LA 1.04 MK 1.00* NL 0.82 OV 0.97 ! PT 1.17 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.01 KP 0.95 ! LA 0.98 MK 1.00* NL 0.96 OV 1.01 ! PT 1.17 SC 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 0.98 KP 1.03 ! LA 1.04 MK 1.00* NL 0.94 OV 0.94 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 1.00 KP 1.00* ! LA 0.94 MK 1.00* NL 1.00* OV 0.95 ! PT 0.98 SC 0.65 ! ! ! Fit before self-cal, rms=0.148442Jy sigma=0.000654 ! Fit after self-cal, rms=0.115996Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.105 mas, bmaj=8.097 mas, bpa=16.58 degrees ! Estimated noise=714.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.77209e-05 Jy ! Component: 100 - total flux cleaned = -0.000138546 Jy ! Component: 150 - total flux cleaned = -9.96031e-05 Jy ! Component: 200 - total flux cleaned = -5.08595e-05 Jy ! Total flux subtracted in 200 components = -5.08595e-05 Jy ! Clean residual min=-0.002265 max=0.002230 Jy/beam ! Clean residual mean=0.000006 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0815003 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 29 components and 0.0815003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115976Jy sigma=0.000652 ! Fit after self-cal, rms=0.115881Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115881Jy sigma=0.000651 ! Fit after self-cal, rms=0.107274Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.102 mas, bmaj=8.074 mas, bpa=16.44 degrees ! Estimated noise=714.154 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407502 Jy ! Component: 100 - total flux cleaned = 0.000542841 Jy ! Component: 150 - total flux cleaned = 0.000577398 Jy ! Component: 200 - total flux cleaned = 0.000615136 Jy ! Total flux subtracted in 200 components = 0.000615136 Jy ! Clean residual min=-0.001949 max=0.001616 Jy/beam ! Clean residual mean=-0.000003 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0821155 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 45 components and 0.0821155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107267Jy sigma=0.000649 ! Fit after self-cal, rms=0.107297Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.63865e-05 Jy ! Component: 100 - total flux cleaned = 7.56319e-06 Jy ! Component: 150 - total flux cleaned = 7.53603e-06 Jy ! Component: 200 - total flux cleaned = 1.13195e-06 Jy ! Total flux subtracted in 200 components = 1.13195e-06 Jy ! Clean residual min=-0.001759 max=0.001584 Jy/beam ! Clean residual mean=-0.000002 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0821166 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0821166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107295Jy sigma=0.000649 ! Fit after self-cal, rms=0.107295Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107295Jy sigma=0.000649 ! Fit after self-cal, rms=0.106697Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.095 mas, bmaj=8.058 mas, bpa=16.38 degrees ! Estimated noise=714.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00027613 Jy ! Component: 100 - total flux cleaned = 0.000347233 Jy ! Component: 150 - total flux cleaned = 0.000371157 Jy ! Component: 200 - total flux cleaned = 0.000391267 Jy ! Total flux subtracted in 200 components = 0.000391267 Jy ! Clean residual min=-0.001790 max=0.001547 Jy/beam ! Clean residual mean=-0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0825079 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.0825079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106694Jy sigma=0.000649 ! Fit after self-cal, rms=0.106694Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.2372e-05 Jy ! Component: 100 - total flux cleaned = 3.54672e-05 Jy ! Component: 150 - total flux cleaned = 3.53742e-05 Jy ! Component: 200 - total flux cleaned = 4.01541e-05 Jy ! Total flux subtracted in 200 components = 4.01541e-05 Jy ! Clean residual min=-0.001767 max=0.001549 Jy/beam ! Clean residual mean=-0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.082548 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.082548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106693Jy sigma=0.000649 ! Fit after self-cal, rms=0.106692Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106692Jy sigma=0.000649 ! Fit after self-cal, rms=0.106850Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.459 mas, bmaj=9.884 mas, bpa=2.814 degrees ! Estimated noise=873.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316118 Jy ! Component: 100 - total flux cleaned = 0.000418647 Jy ! Component: 150 - total flux cleaned = 0.000435824 Jy ! Component: 200 - total flux cleaned = 0.000438182 Jy ! Total flux subtracted in 200 components = 0.000438182 Jy ! Clean residual min=-0.001638 max=0.001859 Jy/beam ! Clean residual mean=-0.000006 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0829862 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 74 components and 0.0829862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106848Jy sigma=0.000649 ! Fit after self-cal, rms=0.106845Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.23456e-05 Jy ! Component: 100 - total flux cleaned = 3.64093e-05 Jy ! Component: 150 - total flux cleaned = 3.08337e-05 Jy ! Component: 200 - total flux cleaned = 3.08235e-05 Jy ! Total flux subtracted in 200 components = 3.08235e-05 Jy ! Clean residual min=-0.001646 max=0.001868 Jy/beam ! Clean residual mean=-0.000006 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.083017 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 85 components and 0.083017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106844Jy sigma=0.000649 ! Fit after self-cal, rms=0.106844Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=8.048 mas, bpa=16.36 degrees ! Estimated noise=714.802 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.091 x 8.048 at 16.36 degrees (North through East) ! Clean map min=-0.0017592 max=0.082608 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=7.569 mas, bpa=18.6 degrees ! Estimated noise=1019.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0644964 Jy ! Component: 100 - total flux cleaned = 0.0785731 Jy ! Component: 150 - total flux cleaned = 0.0811851 Jy ! Component: 200 - total flux cleaned = 0.0821838 Jy ! Total flux subtracted in 200 components = 0.0821838 Jy ! Clean residual min=-0.002539 max=0.002461 Jy/beam ! Clean residual mean=-0.000001 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0821838 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0821838 Jy ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=8.048 mas, bpa=16.36 degrees ! Estimated noise=714.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491061 Jy ! Component: 100 - total flux cleaned = 0.000403049 Jy ! Component: 150 - total flux cleaned = 0.000403837 Jy ! Component: 200 - total flux cleaned = 0.000431628 Jy ! Total flux subtracted in 200 components = 0.000431628 Jy ! Clean residual min=-0.001829 max=0.001599 Jy/beam ! Clean residual mean=-0.000003 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0826155 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 40 components and 0.0826154 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.459 mas, bmaj=9.884 mas, bpa=2.814 degrees ! Estimated noise=873.048 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284814 Jy ! Component: 100 - total flux cleaned = 0.000302278 Jy ! Component: 150 - total flux cleaned = 0.000302297 Jy ! Component: 200 - total flux cleaned = 0.000302411 Jy ! Total flux subtracted in 200 components = 0.000302411 Jy ! Clean residual min=-0.001653 max=0.001867 Jy/beam ! Clean residual mean=-0.000006 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0829178 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.17608e-07 Jy ! Component: 100 - total flux cleaned = 7.6289e-06 Jy ! Component: 150 - total flux cleaned = 1.09106e-05 Jy ! Component: 200 - total flux cleaned = 1.73106e-05 Jy ! Total flux subtracted in 200 components = 1.73106e-05 Jy ! Clean residual min=-0.001655 max=0.001866 Jy/beam ! Clean residual mean=-0.000006 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.0829351 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.0829352 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.091 mas, bmaj=8.048 mas, bpa=16.36 degrees ! Estimated noise=714.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136198 Jy ! Component: 100 - total flux cleaned = -0.000145309 Jy ! Component: 150 - total flux cleaned = -0.000172562 Jy ! Component: 200 - total flux cleaned = -0.000197228 Jy ! Total flux subtracted in 200 components = -0.000197228 Jy ! Clean residual min=-0.001821 max=0.001571 Jy/beam ! Clean residual mean=-0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0827379 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.082738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106849Jy sigma=0.000649 ! Fit after self-cal, rms=0.106846Jy sigma=0.000649 wmodel J2208+1808_S_2017_01_16_pus_map.mod ! Writing 60 model components to file: J2208+1808_S_2017_01_16_pus_map.mod wobs J2208+1808_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2208+1808_S_2017_01_16_pus_uvs.fits wwins J2208+1808_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2208+1808_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000428863 Jy ! Component: 100 - total flux cleaned = -0.000261927 Jy ! Component: 150 - total flux cleaned = -0.000106023 Jy ! Component: 200 - total flux cleaned = -3.24998e-05 Jy ! Component: 250 - total flux cleaned = 0.00011064 Jy ! Component: 300 - total flux cleaned = 0.000271894 Jy ! Component: 350 - total flux cleaned = 0.000406588 Jy ! Component: 400 - total flux cleaned = 0.000537678 Jy ! Component: 450 - total flux cleaned = 0.000644473 Jy ! Component: 500 - total flux cleaned = 0.000728649 Jy ! Component: 550 - total flux cleaned = 0.000831866 Jy ! Component: 600 - total flux cleaned = 0.000933096 Jy ! Component: 650 - total flux cleaned = 0.000992729 Jy ! Component: 700 - total flux cleaned = 0.00103206 Jy ! Component: 750 - total flux cleaned = 0.00109012 Jy ! Component: 800 - total flux cleaned = 0.00110924 Jy ! Component: 850 - total flux cleaned = 0.00116507 Jy ! Component: 900 - total flux cleaned = 0.00116438 Jy ! Component: 950 - total flux cleaned = 0.00111005 Jy ! Component: 1000 - total flux cleaned = 0.00111038 Jy ! Component: 1050 - total flux cleaned = 0.00111034 Jy ! Component: 1100 - total flux cleaned = 0.00111042 Jy ! Component: 1150 - total flux cleaned = 0.00109281 Jy ! Component: 1200 - total flux cleaned = 0.00105897 Jy ! Component: 1250 - total flux cleaned = 0.00107602 Jy ! Component: 1300 - total flux cleaned = 0.0011258 Jy ! Component: 1350 - total flux cleaned = 0.00110923 Jy ! Component: 1400 - total flux cleaned = 0.00110934 Jy ! Component: 1450 - total flux cleaned = 0.00110931 Jy ! Component: 1500 - total flux cleaned = 0.00110929 Jy ! Component: 1550 - total flux cleaned = 0.00114064 Jy ! Component: 1600 - total flux cleaned = 0.00109398 Jy ! Component: 1650 - total flux cleaned = 0.00107871 Jy ! Component: 1700 - total flux cleaned = 0.00110899 Jy ! Component: 1750 - total flux cleaned = 0.00109376 Jy ! Component: 1800 - total flux cleaned = 0.00112325 Jy ! Component: 1850 - total flux cleaned = 0.00104919 Jy ! Component: 1900 - total flux cleaned = 0.00110745 Jy ! Component: 1950 - total flux cleaned = 0.00109298 Jy ! Component: 2000 - total flux cleaned = 0.00110725 Jy ! Component: 2050 - total flux cleaned = 0.00109299 Jy ! Component: 2100 - total flux cleaned = 0.00112104 Jy ! Component: 2150 - total flux cleaned = 0.00117708 Jy ! Component: 2200 - total flux cleaned = 0.00114941 Jy ! Component: 2250 - total flux cleaned = 0.00113566 Jy ! Component: 2300 - total flux cleaned = 0.00116305 Jy ! Component: 2350 - total flux cleaned = 0.00113593 Jy ! Component: 2400 - total flux cleaned = 0.00118973 Jy ! Component: 2450 - total flux cleaned = 0.0011632 Jy ! Component: 2500 - total flux cleaned = 0.00124292 Jy ! Component: 2550 - total flux cleaned = 0.00125591 Jy ! Component: 2600 - total flux cleaned = 0.00136057 Jy ! Component: 2650 - total flux cleaned = 0.00138634 Jy ! Component: 2700 - total flux cleaned = 0.00138633 Jy ! Component: 2750 - total flux cleaned = 0.00141198 Jy ! Component: 2800 - total flux cleaned = 0.00139938 Jy ! Component: 2850 - total flux cleaned = 0.00141199 Jy ! Component: 2900 - total flux cleaned = 0.00143723 Jy ! Component: 2950 - total flux cleaned = 0.00142478 Jy ! Component: 3000 - total flux cleaned = 0.00147421 Jy ! Component: 3050 - total flux cleaned = 0.00144964 Jy ! Component: 3100 - total flux cleaned = 0.00144967 Jy ! Component: 3150 - total flux cleaned = 0.00146192 Jy ! Component: 3200 - total flux cleaned = 0.00143769 Jy ! Component: 3250 - total flux cleaned = 0.00146175 Jy ! Component: 3300 - total flux cleaned = 0.00144981 Jy ! Component: 3350 - total flux cleaned = 0.00139059 Jy ! Component: 3400 - total flux cleaned = 0.00142592 Jy ! Component: 3450 - total flux cleaned = 0.00140263 Jy ! Component: 3500 - total flux cleaned = 0.00142591 Jy ! Component: 3550 - total flux cleaned = 0.00139121 Jy ! Component: 3600 - total flux cleaned = 0.00139122 Jy ! Component: 3650 - total flux cleaned = 0.00141416 Jy ! Component: 3700 - total flux cleaned = 0.00139147 Jy ! Component: 3750 - total flux cleaned = 0.00140278 Jy ! Component: 3800 - total flux cleaned = 0.00139146 Jy ! Component: 3850 - total flux cleaned = 0.0013691 Jy ! Component: 3900 - total flux cleaned = 0.00138011 Jy ! Component: 3950 - total flux cleaned = 0.00136904 Jy ! Component: 4000 - total flux cleaned = 0.00134711 Jy ! Component: 4050 - total flux cleaned = 0.00137975 Jy ! Total flux subtracted in 4096 components = 0.00132553 Jy ! Clean residual min=-0.000649 max=0.000695 Jy/beam ! Clean residual mean=-0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0840635 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 371 components and 0.0840635 Jy ![Exited script file: muppet] wmap "J2208+1808_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.091 x 8.048 at 16.36 degrees (North through East) ! Clean map min=-0.0012528 max=0.082508 Jy/beam ! Writing clean map to FITS file: J2208+1808_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0825077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000206876 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.752205 0.752205 1.50441 3.00882 6.01764 12.0353 24.0706 48.1411 96.2823 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.082 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.091 x 8.048 at 16.36 degrees (North through East) ! Clean map min=-0.0012528 max=0.082508 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2208+1808_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:24:00 2019