! Started logfile: J2203+1725_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:23:36 2019 obs J2203+1725_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2203+1725_S_2017_01_16_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.72028 visibilities/baseline/integration-bin. ! Found source: J2203+1725 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 18540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2203+1725_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 210 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 494 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.672119Jy sigma=0.005015 ! Fit after self-cal, rms=0.655058Jy sigma=0.004885 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.466 mas, bmaj=7.805 mas, bpa=18.35 degrees ! Estimated noise=1027.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.299192 Jy ! Component: 100 - total flux cleaned = 0.364435 Jy ! Total flux subtracted in 100 components = 0.364435 Jy ! Clean residual min=-0.017100 max=0.025878 Jy/beam ! Clean residual mean=0.000000 rms=0.004857 Jy/beam ! Combined flux in latest and established models = 0.364435 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.364435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192671Jy sigma=0.000956 ! Fit after self-cal, rms=0.192667Jy sigma=0.000956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=8.222 mas, bpa=16.84 degrees ! Estimated noise=719.563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208712 Jy ! Component: 100 - total flux cleaned = 0.0294881 Jy ! Component: 150 - total flux cleaned = 0.030668 Jy ! Component: 200 - total flux cleaned = 0.0314966 Jy ! Total flux subtracted in 200 components = 0.0314966 Jy ! Clean residual min=-0.016346 max=0.020396 Jy/beam ! Clean residual mean=0.000053 rms=0.004807 Jy/beam ! Combined flux in latest and established models = 0.395932 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.395932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191805Jy sigma=0.000913 ! Fit after self-cal, rms=0.191747Jy sigma=0.000913 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.91 HN 0.95 KP 0.94 ! LA 0.98 MK 1.00* NL 0.90 OV 0.92 ! PT 1.34 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 0.99 KP 0.92 ! LA 0.94 MK 1.00* NL 1.01 OV 0.96 ! PT 1.31 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 0.97 KP 0.96 ! LA 0.96 MK 1.00* NL 0.97 OV 0.87 ! PT 1.34 SC 0.96 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 0.96 KP 1.00* ! LA 0.97 MK 1.00* NL 1.00* OV 0.87 ! PT 1.34 SC 1.30 ! ! ! Fit before self-cal, rms=0.191747Jy sigma=0.000913 ! Fit after self-cal, rms=0.212245Jy sigma=0.000818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.105 mas, bmaj=8.188 mas, bpa=16.31 degrees ! Estimated noise=707.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392254 Jy ! Component: 100 - total flux cleaned = 0.00241067 Jy ! Component: 150 - total flux cleaned = 0.00127229 Jy ! Component: 200 - total flux cleaned = 0.000699821 Jy ! Total flux subtracted in 200 components = 0.000699821 Jy ! Clean residual min=-0.011515 max=0.013165 Jy/beam ! Clean residual mean=0.000088 rms=0.003592 Jy/beam ! Combined flux in latest and established models = 0.396632 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.396632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211851Jy sigma=0.000812 ! Fit after self-cal, rms=0.212283Jy sigma=0.000812 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212283Jy sigma=0.000812 ! Fit after self-cal, rms=0.216659Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.083 mas, bmaj=8.147 mas, bpa=16.02 degrees ! Estimated noise=710.414 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00618713 Jy ! Component: 100 - total flux cleaned = 0.00841493 Jy ! Component: 150 - total flux cleaned = 0.00867443 Jy ! Component: 200 - total flux cleaned = 0.00883609 Jy ! Total flux subtracted in 200 components = 0.00883609 Jy ! Clean residual min=-0.003490 max=0.007772 Jy/beam ! Clean residual mean=0.000011 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.405468 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.405468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216506Jy sigma=0.000675 ! Fit after self-cal, rms=0.217146Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680384 Jy ! Component: 100 - total flux cleaned = 0.00754265 Jy ! Component: 150 - total flux cleaned = 0.00783324 Jy ! Component: 200 - total flux cleaned = 0.00815357 Jy ! Total flux subtracted in 200 components = 0.00815357 Jy ! Clean residual min=-0.002915 max=0.003752 Jy/beam ! Clean residual mean=0.000016 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.413621 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 0.413621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216917Jy sigma=0.000670 ! Fit after self-cal, rms=0.216914Jy sigma=0.000670 ! Inverting map ! Added new window around map position (-81, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344721 Jy ! Component: 100 - total flux cleaned = 0.0042262 Jy ! Component: 150 - total flux cleaned = 0.00442245 Jy ! Component: 200 - total flux cleaned = 0.00447938 Jy ! Total flux subtracted in 200 components = 0.00447938 Jy ! Clean residual min=-0.002727 max=0.003032 Jy/beam ! Clean residual mean=0.000014 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.418101 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.418101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216817Jy sigma=0.000668 ! Fit after self-cal, rms=0.216822Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216822Jy sigma=0.000668 ! Fit after self-cal, rms=0.219109Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.075 mas, bmaj=8.12 mas, bpa=15.9 degrees ! Estimated noise=711.826 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325803 Jy ! Component: 100 - total flux cleaned = 0.00466501 Jy ! Component: 150 - total flux cleaned = 0.00502259 Jy ! Component: 200 - total flux cleaned = 0.00536263 Jy ! Total flux subtracted in 200 components = 0.00536263 Jy ! Clean residual min=-0.002117 max=0.002732 Jy/beam ! Clean residual mean=0.000007 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.423463 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 116 components and 0.423463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219052Jy sigma=0.000665 ! Fit after self-cal, rms=0.219049Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (36, 64.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223272 Jy ! Component: 100 - total flux cleaned = 0.00345586 Jy ! Component: 150 - total flux cleaned = 0.00428992 Jy ! Component: 200 - total flux cleaned = 0.00464034 Jy ! Total flux subtracted in 200 components = 0.00464034 Jy ! Clean residual min=-0.001870 max=0.002212 Jy/beam ! Clean residual mean=0.000006 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.428104 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.428104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218998Jy sigma=0.000664 ! Fit after self-cal, rms=0.219006Jy sigma=0.000664 ! Inverting map ! Added new window around map position (-17.5, -77.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197189 Jy ! Component: 100 - total flux cleaned = 0.0023454 Jy ! Component: 150 - total flux cleaned = 0.00265312 Jy ! Component: 200 - total flux cleaned = 0.00307769 Jy ! Total flux subtracted in 200 components = 0.00307769 Jy ! Clean residual min=-0.001805 max=0.001902 Jy/beam ! Clean residual mean=0.000007 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.431181 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 162 components and 0.431181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218973Jy sigma=0.000664 ! Fit after self-cal, rms=0.218973Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218973Jy sigma=0.000664 ! Fit after self-cal, rms=0.220085Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.462 mas, bmaj=9.943 mas, bpa=3.037 degrees ! Estimated noise=877.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200392 Jy ! Component: 100 - total flux cleaned = 0.0028702 Jy ! Component: 150 - total flux cleaned = 0.00351194 Jy ! Component: 200 - total flux cleaned = 0.00396137 Jy ! Total flux subtracted in 200 components = 0.00396137 Jy ! Clean residual min=-0.002221 max=0.001957 Jy/beam ! Clean residual mean=0.000011 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.435143 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 197 components and 0.435143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220066Jy sigma=0.000663 ! Fit after self-cal, rms=0.220077Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00082073 Jy ! Component: 100 - total flux cleaned = 0.0012305 Jy ! Component: 150 - total flux cleaned = 0.00139239 Jy ! Component: 200 - total flux cleaned = 0.00156826 Jy ! Total flux subtracted in 200 components = 0.00156826 Jy ! Clean residual min=-0.002098 max=0.001952 Jy/beam ! Clean residual mean=0.000010 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.436711 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 228 components and 0.436711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220067Jy sigma=0.000663 ! Fit after self-cal, rms=0.220065Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=8.112 mas, bpa=15.89 degrees ! Estimated noise=712.652 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.072 x 8.112 at 15.89 degrees (North through East) ! Clean map min=-0.0021834 max=0.38218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=7.726 mas, bpa=17.47 degrees ! Estimated noise=1009.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.293793 Jy ! Component: 100 - total flux cleaned = 0.35947 Jy ! Component: 150 - total flux cleaned = 0.384914 Jy ! Component: 200 - total flux cleaned = 0.399753 Jy ! Total flux subtracted in 200 components = 0.399753 Jy ! Clean residual min=-0.004555 max=0.007827 Jy/beam ! Clean residual mean=-0.000007 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.399753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.399753 Jy ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=8.112 mas, bpa=15.89 degrees ! Estimated noise=712.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115887 Jy ! Component: 100 - total flux cleaned = 0.0184675 Jy ! Component: 150 - total flux cleaned = 0.0220068 Jy ! Component: 200 - total flux cleaned = 0.0242202 Jy ! Total flux subtracted in 200 components = 0.0242202 Jy ! Clean residual min=-0.002318 max=0.002748 Jy/beam ! Clean residual mean=0.000009 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.423973 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.423973 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.462 mas, bmaj=9.943 mas, bpa=3.037 degrees ! Estimated noise=877.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355314 Jy ! Component: 100 - total flux cleaned = 0.00499217 Jy ! Component: 150 - total flux cleaned = 0.0061825 Jy ! Component: 200 - total flux cleaned = 0.00711762 Jy ! Total flux subtracted in 200 components = 0.00711762 Jy ! Clean residual min=-0.002640 max=0.002175 Jy/beam ! Clean residual mean=0.000016 rms=0.000673 Jy/beam ! Combined flux in latest and established models = 0.431091 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000762685 Jy ! Component: 100 - total flux cleaned = 0.00151 Jy ! Component: 150 - total flux cleaned = 0.00212449 Jy ! Component: 200 - total flux cleaned = 0.00258074 Jy ! Total flux subtracted in 200 components = 0.00258074 Jy ! Clean residual min=-0.002391 max=0.001980 Jy/beam ! Clean residual mean=0.000015 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.433671 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 110 components and 0.433671 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=8.112 mas, bpa=15.89 degrees ! Estimated noise=712.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271448 Jy ! Component: 100 - total flux cleaned = 0.000693916 Jy ! Component: 150 - total flux cleaned = 0.000907765 Jy ! Component: 200 - total flux cleaned = 0.00119281 Jy ! Total flux subtracted in 200 components = 0.00119281 Jy ! Clean residual min=-0.001756 max=0.001778 Jy/beam ! Clean residual mean=0.000008 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.434864 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.434864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220089Jy sigma=0.000664 ! Fit after self-cal, rms=0.220083Jy sigma=0.000664 wmodel J2203+1725_S_2017_01_16_pus_map.mod ! Writing 134 model components to file: J2203+1725_S_2017_01_16_pus_map.mod wobs J2203+1725_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2203+1725_S_2017_01_16_pus_uvs.fits wwins J2203+1725_S_2017_01_16_pus_map.win ! wwins: Wrote 5 windows to J2203+1725_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174073 Jy ! Component: 100 - total flux cleaned = -4.76527e-05 Jy ! Component: 150 - total flux cleaned = 0.000132246 Jy ! Component: 200 - total flux cleaned = 7.45822e-05 Jy ! Component: 250 - total flux cleaned = 7.49433e-05 Jy ! Component: 300 - total flux cleaned = 4.74155e-05 Jy ! Component: 350 - total flux cleaned = -3.30628e-05 Jy ! Component: 400 - total flux cleaned = -0.000163648 Jy ! Component: 450 - total flux cleaned = -0.0001121 Jy ! Component: 500 - total flux cleaned = -0.000136236 Jy ! Component: 550 - total flux cleaned = 3.62087e-05 Jy ! Component: 600 - total flux cleaned = 3.55229e-05 Jy ! Component: 650 - total flux cleaned = 1.14906e-05 Jy ! Component: 700 - total flux cleaned = 1.16685e-05 Jy ! Component: 750 - total flux cleaned = 0.00010416 Jy ! Component: 800 - total flux cleaned = 0.000103989 Jy ! Component: 850 - total flux cleaned = 0.000126973 Jy ! Component: 900 - total flux cleaned = 0.000149182 Jy ! Component: 950 - total flux cleaned = 0.000148884 Jy ! Component: 1000 - total flux cleaned = 6.20115e-05 Jy ! Component: 1050 - total flux cleaned = 4.04386e-05 Jy ! Component: 1100 - total flux cleaned = -6.49386e-05 Jy ! Component: 1150 - total flux cleaned = -0.000148253 Jy ! Component: 1200 - total flux cleaned = -0.000127301 Jy ! Component: 1250 - total flux cleaned = -0.00016846 Jy ! Component: 1300 - total flux cleaned = -0.0002492 Jy ! Component: 1350 - total flux cleaned = -0.00028894 Jy ! Component: 1400 - total flux cleaned = -0.000348369 Jy ! Component: 1450 - total flux cleaned = -0.000426454 Jy ! Component: 1500 - total flux cleaned = -0.000561376 Jy ! Component: 1550 - total flux cleaned = -0.000580034 Jy ! Component: 1600 - total flux cleaned = -0.000655632 Jy ! Component: 1650 - total flux cleaned = -0.000749237 Jy ! Component: 1700 - total flux cleaned = -0.000786478 Jy ! Component: 1750 - total flux cleaned = -0.000933503 Jy ! Component: 1800 - total flux cleaned = -0.00102431 Jy ! Component: 1850 - total flux cleaned = -0.00107842 Jy ! Component: 1900 - total flux cleaned = -0.0011498 Jy ! Component: 1950 - total flux cleaned = -0.00125621 Jy ! Component: 2000 - total flux cleaned = -0.00127364 Jy ! Component: 2050 - total flux cleaned = -0.00141284 Jy ! Component: 2100 - total flux cleaned = -0.0014475 Jy ! Component: 2150 - total flux cleaned = -0.00161886 Jy ! Component: 2200 - total flux cleaned = -0.00166973 Jy ! Component: 2250 - total flux cleaned = -0.00177058 Jy ! Component: 2300 - total flux cleaned = -0.00180393 Jy ! Component: 2350 - total flux cleaned = -0.00187037 Jy ! Component: 2400 - total flux cleaned = -0.00191989 Jy ! Component: 2450 - total flux cleaned = -0.00201796 Jy ! Component: 2500 - total flux cleaned = -0.00208276 Jy ! Component: 2550 - total flux cleaned = -0.00213103 Jy ! Component: 2600 - total flux cleaned = -0.00216305 Jy ! Component: 2650 - total flux cleaned = -0.00225838 Jy ! Component: 2700 - total flux cleaned = -0.00232151 Jy ! Component: 2750 - total flux cleaned = -0.00235288 Jy ! Component: 2800 - total flux cleaned = -0.00236841 Jy ! Component: 2850 - total flux cleaned = -0.0024304 Jy ! Component: 2900 - total flux cleaned = -0.00250721 Jy ! Component: 2950 - total flux cleaned = -0.00255304 Jy ! Component: 3000 - total flux cleaned = -0.0025379 Jy ! Component: 3050 - total flux cleaned = -0.00262859 Jy ! Component: 3100 - total flux cleaned = -0.00267363 Jy ! Component: 3150 - total flux cleaned = -0.00273324 Jy ! Component: 3200 - total flux cleaned = -0.00279268 Jy ! Component: 3250 - total flux cleaned = -0.00280744 Jy ! Component: 3300 - total flux cleaned = -0.00289527 Jy ! Component: 3350 - total flux cleaned = -0.00290988 Jy ! Component: 3400 - total flux cleaned = -0.0029388 Jy ! Component: 3450 - total flux cleaned = -0.00303948 Jy ! Component: 3500 - total flux cleaned = -0.00303928 Jy ! Component: 3550 - total flux cleaned = -0.0030394 Jy ! Component: 3600 - total flux cleaned = -0.00309589 Jy ! Component: 3650 - total flux cleaned = -0.00312413 Jy ! Component: 3700 - total flux cleaned = -0.00313809 Jy ! Component: 3750 - total flux cleaned = -0.00317977 Jy ! Component: 3800 - total flux cleaned = -0.00323498 Jy ! Component: 3850 - total flux cleaned = -0.003235 Jy ! Component: 3900 - total flux cleaned = -0.00331706 Jy ! Component: 3950 - total flux cleaned = -0.00337132 Jy ! Component: 4000 - total flux cleaned = -0.00335773 Jy ! Component: 4050 - total flux cleaned = -0.00338465 Jy ! Total flux subtracted in 4096 components = -0.00339812 Jy ! Clean residual min=-0.000774 max=0.000771 Jy/beam ! Clean residual mean=0.000005 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.431466 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 425 components and 0.431466 Jy ![Exited script file: muppet] wmap "J2203+1725_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.072 x 8.112 at 15.89 degrees (North through East) ! Clean map min=-0.0018255 max=0.3811 Jy/beam ! Writing clean map to FITS file: J2203+1725_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.381103 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025955 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.204315 0.204315 0.408629 0.817259 1.63452 3.26903 6.53807 13.0761 26.1523 52.3046 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.381 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.072 x 8.112 at 15.89 degrees (North through East) ! Clean map min=-0.0018255 max=0.3811 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2203+1725_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:23:42 2019