! Started logfile: J2200-3716_S_2017_03_23_pus_uvs.log on Mon May 13 10:09:24 2019 obs J2200-3716_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2200-3716_S_2017_03_23_pus_uva.fits ! AN table 1: 129 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.517485 visibilities/baseline/integration-bin. ! Found source: J2200-3716 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 12016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2200-3716_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 597 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 528 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 833 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.926585Jy sigma=0.005487 ! Fit after self-cal, rms=0.894446Jy sigma=0.005324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=7.535 mas, bpa=1.526 degrees ! Estimated noise=4972.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0938801 Jy ! Component: 100 - total flux cleaned = 0.117797 Jy ! Total flux subtracted in 100 components = 0.117797 Jy ! Clean residual min=-0.017419 max=0.015097 Jy/beam ! Clean residual mean=-0.000077 rms=0.003728 Jy/beam ! Combined flux in latest and established models = 0.117797 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.117797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126782Jy sigma=0.000660 ! Fit after self-cal, rms=0.126736Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=8.363 mas, bpa=2.26 degrees ! Estimated noise=1303.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469051 Jy ! Component: 100 - total flux cleaned = 0.00491429 Jy ! Component: 150 - total flux cleaned = 0.0051522 Jy ! Component: 200 - total flux cleaned = 0.00538479 Jy ! Total flux subtracted in 200 components = 0.00538479 Jy ! Clean residual min=-0.005011 max=0.003894 Jy/beam ! Clean residual mean=-0.000139 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.123182 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.123182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126464Jy sigma=0.000658 ! Fit after self-cal, rms=0.126414Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.96 HN 0.81 KP 1.06 ! LA 1.00 MK 1.01 NL 1.00* OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.11 HN 1.00* KP 1.01 ! LA 0.96 MK 1.04 NL 1.01 OV 1.02 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.05 HN 0.71 KP 0.86 ! LA 0.74 MK 1.04 NL 1.22 OV 0.93 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.08 HN 0.38 KP 1.00* ! LA 0.65 MK 1.07 NL 1.00* OV 0.98 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.126414Jy sigma=0.000658 ! Fit after self-cal, rms=0.125311Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=8.351 mas, bpa=2.49 degrees ! Estimated noise=1330.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000547821 Jy ! Component: 100 - total flux cleaned = -0.000425138 Jy ! Component: 150 - total flux cleaned = -0.000350148 Jy ! Component: 200 - total flux cleaned = -0.000352564 Jy ! Total flux subtracted in 200 components = -0.000352564 Jy ! Clean residual min=-0.003448 max=0.003035 Jy/beam ! Clean residual mean=-0.000027 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.122829 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.122829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125283Jy sigma=0.000651 ! Fit after self-cal, rms=0.125258Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125258Jy sigma=0.000651 ! Fit after self-cal, rms=0.126008Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=8.382 mas, bpa=2.478 degrees ! Estimated noise=1332.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340622 Jy ! Component: 100 - total flux cleaned = -0.000239826 Jy ! Component: 150 - total flux cleaned = -0.000208849 Jy ! Component: 200 - total flux cleaned = -0.000181759 Jy ! Total flux subtracted in 200 components = -0.000181759 Jy ! Clean residual min=-0.003325 max=0.002872 Jy/beam ! Clean residual mean=-0.000015 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.122647 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.122647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125992Jy sigma=0.000650 ! Fit after self-cal, rms=0.126002Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.57512e-05 Jy ! Component: 100 - total flux cleaned = -1.54517e-06 Jy ! Component: 150 - total flux cleaned = -2.66731e-07 Jy ! Component: 200 - total flux cleaned = -1.80901e-06 Jy ! Total flux subtracted in 200 components = -1.80901e-06 Jy ! Clean residual min=-0.003321 max=0.002807 Jy/beam ! Clean residual mean=-0.000018 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 0.122646 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.122646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125992Jy sigma=0.000650 ! Fit after self-cal, rms=0.125988Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125988Jy sigma=0.000650 ! Fit after self-cal, rms=0.126285Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=8.398 mas, bpa=2.452 degrees ! Estimated noise=1334.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158181 Jy ! Component: 100 - total flux cleaned = -8.72262e-05 Jy ! Component: 150 - total flux cleaned = -8.91132e-05 Jy ! Component: 200 - total flux cleaned = -0.000111368 Jy ! Total flux subtracted in 200 components = -0.000111368 Jy ! Clean residual min=-0.003309 max=0.002751 Jy/beam ! Clean residual mean=-0.000016 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.122534 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.122534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126278Jy sigma=0.000650 ! Fit after self-cal, rms=0.126277Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.14113e-05 Jy ! Component: 100 - total flux cleaned = 1.95009e-05 Jy ! Component: 150 - total flux cleaned = 6.11122e-07 Jy ! Component: 200 - total flux cleaned = -8.70514e-08 Jy ! Total flux subtracted in 200 components = -8.70514e-08 Jy ! Clean residual min=-0.003304 max=0.002723 Jy/beam ! Clean residual mean=-0.000017 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.122534 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.122534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126272Jy sigma=0.000650 ! Fit after self-cal, rms=0.126269Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126269Jy sigma=0.000650 ! Fit after self-cal, rms=0.126403Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.222 mas, bmaj=28.87 mas, bpa=7.847 degrees ! Estimated noise=1666.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.84922e-06 Jy ! Component: 100 - total flux cleaned = 8.01432e-06 Jy ! Component: 150 - total flux cleaned = 8.16311e-06 Jy ! Component: 200 - total flux cleaned = 8.27624e-06 Jy ! Total flux subtracted in 200 components = 8.27624e-06 Jy ! Clean residual min=-0.003269 max=0.003249 Jy/beam ! Clean residual mean=-0.000032 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.122542 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 44 components and 0.122542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126402Jy sigma=0.000650 ! Fit after self-cal, rms=0.126404Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.53457e-07 Jy ! Component: 100 - total flux cleaned = 1.30987e-06 Jy ! Component: 150 - total flux cleaned = 1.50108e-06 Jy ! Component: 200 - total flux cleaned = 1.62784e-06 Jy ! Total flux subtracted in 200 components = 1.62784e-06 Jy ! Clean residual min=-0.003270 max=0.003253 Jy/beam ! Clean residual mean=-0.000032 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 0.122544 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 44 components and 0.122544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126404Jy sigma=0.000650 ! Fit after self-cal, rms=0.126403Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.406 mas, bpa=2.436 degrees ! Estimated noise=1335.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.406 at 2.436 degrees (North through East) ! Clean map min=-0.0031534 max=0.11232 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=7.702 mas, bpa=0.7647 degrees ! Estimated noise=4851.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0847584 Jy ! Component: 100 - total flux cleaned = 0.104858 Jy ! Component: 150 - total flux cleaned = 0.11431 Jy ! Component: 200 - total flux cleaned = 0.118207 Jy ! Total flux subtracted in 200 components = 0.118207 Jy ! Clean residual min=-0.010468 max=0.008653 Jy/beam ! Clean residual mean=-0.000011 rms=0.002640 Jy/beam ! Combined flux in latest and established models = 0.118207 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.118207 Jy ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.406 mas, bpa=2.436 degrees ! Estimated noise=1335.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324982 Jy ! Component: 100 - total flux cleaned = 0.00351832 Jy ! Component: 150 - total flux cleaned = 0.00374005 Jy ! Component: 200 - total flux cleaned = 0.00392715 Jy ! Total flux subtracted in 200 components = 0.00392715 Jy ! Clean residual min=-0.003239 max=0.002922 Jy/beam ! Clean residual mean=-0.000019 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.122134 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.122134 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.222 mas, bmaj=28.87 mas, bpa=7.847 degrees ! Estimated noise=1666.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211601 Jy ! Component: 100 - total flux cleaned = 0.000212954 Jy ! Component: 150 - total flux cleaned = 0.000223561 Jy ! Component: 200 - total flux cleaned = 0.000224052 Jy ! Total flux subtracted in 200 components = 0.000224052 Jy ! Clean residual min=-0.003338 max=0.003213 Jy/beam ! Clean residual mean=-0.000035 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.122358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48406e-06 Jy ! Component: 100 - total flux cleaned = 2.9701e-06 Jy ! Component: 150 - total flux cleaned = 4.39417e-06 Jy ! Component: 200 - total flux cleaned = 6.27468e-06 Jy ! Total flux subtracted in 200 components = 6.27468e-06 Jy ! Clean residual min=-0.003329 max=0.003219 Jy/beam ! Clean residual mean=-0.000035 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.122365 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.122365 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.105 mas, bmaj=8.406 mas, bpa=2.436 degrees ! Estimated noise=1335.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.40777e-05 Jy ! Component: 100 - total flux cleaned = -3.1563e-06 Jy ! Component: 150 - total flux cleaned = 2.83157e-05 Jy ! Component: 200 - total flux cleaned = 5.88573e-05 Jy ! Total flux subtracted in 200 components = 5.88573e-05 Jy ! Clean residual min=-0.003195 max=0.002869 Jy/beam ! Clean residual mean=-0.000017 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.122423 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 33 components and 0.122423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126427Jy sigma=0.000650 ! Fit after self-cal, rms=0.126428Jy sigma=0.000650 wmodel J2200-3716_S_2017_03_23_pus_map.mod ! Writing 33 model components to file: J2200-3716_S_2017_03_23_pus_map.mod wobs J2200-3716_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2200-3716_S_2017_03_23_pus_uvs.fits wwins J2200-3716_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J2200-3716_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103977 Jy ! Component: 100 - total flux cleaned = -0.00129246 Jy ! Component: 150 - total flux cleaned = -0.00143349 Jy ! Component: 200 - total flux cleaned = -0.00156598 Jy ! Component: 250 - total flux cleaned = -0.00160715 Jy ! Component: 300 - total flux cleaned = -0.00152677 Jy ! Component: 350 - total flux cleaned = -0.00156668 Jy ! Component: 400 - total flux cleaned = -0.0016037 Jy ! Component: 450 - total flux cleaned = -0.00160307 Jy ! Component: 500 - total flux cleaned = -0.00163576 Jy ! Component: 550 - total flux cleaned = -0.00163458 Jy ! Component: 600 - total flux cleaned = -0.00169687 Jy ! Component: 650 - total flux cleaned = -0.00169584 Jy ! Component: 700 - total flux cleaned = -0.00172524 Jy ! Component: 750 - total flux cleaned = -0.00172539 Jy ! Component: 800 - total flux cleaned = -0.00175467 Jy ! Component: 850 - total flux cleaned = -0.0017557 Jy ! Component: 900 - total flux cleaned = -0.00175704 Jy ! Component: 950 - total flux cleaned = -0.00181041 Jy ! Component: 1000 - total flux cleaned = -0.001887 Jy ! Component: 1050 - total flux cleaned = -0.00201071 Jy ! Component: 1100 - total flux cleaned = -0.00205931 Jy ! Component: 1150 - total flux cleaned = -0.00227187 Jy ! Component: 1200 - total flux cleaned = -0.00236452 Jy ! Component: 1250 - total flux cleaned = -0.00245584 Jy ! Component: 1300 - total flux cleaned = -0.00252346 Jy ! Component: 1350 - total flux cleaned = -0.00261121 Jy ! Component: 1400 - total flux cleaned = -0.00265439 Jy ! Component: 1450 - total flux cleaned = -0.00269664 Jy ! Component: 1500 - total flux cleaned = -0.00273814 Jy ! Component: 1550 - total flux cleaned = -0.00273803 Jy ! Component: 1600 - total flux cleaned = -0.00273806 Jy ! Component: 1650 - total flux cleaned = -0.00281716 Jy ! Component: 1700 - total flux cleaned = -0.0027975 Jy ! Component: 1750 - total flux cleaned = -0.00289384 Jy ! Component: 1800 - total flux cleaned = -0.00293174 Jy ! Component: 1850 - total flux cleaned = -0.00296927 Jy ! Component: 1900 - total flux cleaned = -0.00302505 Jy ! Component: 1950 - total flux cleaned = -0.00307989 Jy ! Component: 2000 - total flux cleaned = -0.00317014 Jy ! Component: 2050 - total flux cleaned = -0.00322384 Jy ! Component: 2100 - total flux cleaned = -0.00334738 Jy ! Component: 2150 - total flux cleaned = -0.00333009 Jy ! Component: 2200 - total flux cleaned = -0.00343351 Jy ! Component: 2250 - total flux cleaned = -0.00345044 Jy ! Component: 2300 - total flux cleaned = -0.00346734 Jy ! Component: 2350 - total flux cleaned = -0.00351754 Jy ! Component: 2400 - total flux cleaned = -0.00355072 Jy ! Component: 2450 - total flux cleaned = -0.00358362 Jy ! Component: 2500 - total flux cleaned = -0.00361619 Jy ! Component: 2550 - total flux cleaned = -0.00366458 Jy ! Component: 2600 - total flux cleaned = -0.00369634 Jy ! Component: 2650 - total flux cleaned = -0.00375962 Jy ! Component: 2700 - total flux cleaned = -0.00374379 Jy ! Component: 2750 - total flux cleaned = -0.00380594 Jy ! Component: 2800 - total flux cleaned = -0.00382114 Jy ! Component: 2850 - total flux cleaned = -0.00383635 Jy ! Component: 2900 - total flux cleaned = -0.00383638 Jy ! Component: 2950 - total flux cleaned = -0.00389652 Jy ! Component: 3000 - total flux cleaned = -0.00391133 Jy ! Component: 3050 - total flux cleaned = -0.00392615 Jy ! Component: 3100 - total flux cleaned = -0.0039701 Jy ! Component: 3150 - total flux cleaned = -0.00405721 Jy ! Component: 3200 - total flux cleaned = -0.00405695 Jy ! Component: 3250 - total flux cleaned = -0.00414284 Jy ! Component: 3300 - total flux cleaned = -0.00418547 Jy ! Component: 3350 - total flux cleaned = -0.00427017 Jy ! Component: 3400 - total flux cleaned = -0.00435442 Jy ! Component: 3450 - total flux cleaned = -0.00441029 Jy ! Component: 3500 - total flux cleaned = -0.00447967 Jy ! Component: 3550 - total flux cleaned = -0.0045211 Jy ! Component: 3600 - total flux cleaned = -0.00461732 Jy ! Component: 3650 - total flux cleaned = -0.00468569 Jy ! Component: 3700 - total flux cleaned = -0.00476738 Jy ! Component: 3750 - total flux cleaned = -0.00483512 Jy ! Component: 3800 - total flux cleaned = -0.00487565 Jy ! Component: 3850 - total flux cleaned = -0.00498321 Jy ! Component: 3900 - total flux cleaned = -0.00501 Jy ! Component: 3950 - total flux cleaned = -0.00502338 Jy ! Component: 4000 - total flux cleaned = -0.00505013 Jy ! Component: 4050 - total flux cleaned = -0.00510333 Jy ! Total flux subtracted in 4096 components = -0.00514312 Jy ! Clean residual min=-0.000750 max=0.000753 Jy/beam ! Clean residual mean=-0.000004 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.11728 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 279 components and 0.11728 Jy ![Exited script file: muppet] wmap "J2200-3716_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.406 at 2.436 degrees (North through East) ! Clean map min=-0.0021408 max=0.1117 Jy/beam ! Writing clean map to FITS file: J2200-3716_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.111703 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000227719 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.611585 0.611585 1.22317 2.44634 4.89268 9.78536 19.5707 39.1414 78.2829 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.105 x 8.406 at 2.436 degrees (North through East) ! Clean map min=-0.0021408 max=0.1117 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2200-3716_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:09:29 2019