! Started logfile: J2200-1632_S_2017_01_21_pus_uvs.log on Sun May 5 16:04:53 2019 obs J2200-1632_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2200-1632_S_2017_01_21_pus_uva.fits ! AN table 1: 173 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.727842 visibilities/baseline/integration-bin. ! Found source: J2200-1632 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 18132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2200-1632_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 234 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 587 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988537Jy sigma=0.005846 ! Fit after self-cal, rms=0.929686Jy sigma=0.005576 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=6.119 mas, bpa=-5.382 degrees ! Estimated noise=1441.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620314 Jy ! Component: 100 - total flux cleaned = 0.0753334 Jy ! Total flux subtracted in 100 components = 0.0753334 Jy ! Clean residual min=-0.004923 max=0.005534 Jy/beam ! Clean residual mean=0.000003 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.0753334 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0753334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135805Jy sigma=0.000637 ! Fit after self-cal, rms=0.135068Jy sigma=0.000634 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=6.811 mas, bpa=-4.72 degrees ! Estimated noise=984.075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306154 Jy ! Component: 100 - total flux cleaned = 0.0035962 Jy ! Component: 150 - total flux cleaned = 0.00363546 Jy ! Component: 200 - total flux cleaned = 0.00360249 Jy ! Total flux subtracted in 200 components = 0.00360249 Jy ! Clean residual min=-0.002949 max=0.002909 Jy/beam ! Clean residual mean=0.000005 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0789359 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.0789359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134922Jy sigma=0.000634 ! Fit after self-cal, rms=0.134884Jy sigma=0.000634 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.03 LA 1.09 ! MK 0.95 NL 1.02 OV 0.95 PT 1.05 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.99 LA 1.08 ! MK 1.09 NL 1.00 OV 0.98 PT 1.05 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.02 LA 0.96 ! MK 1.03 NL 1.09 OV 0.88 PT 1.05 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.90 LA 0.92 ! MK 0.84 NL 1.00* OV 0.71 PT 1.04 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.134884Jy sigma=0.000634 ! Fit after self-cal, rms=0.124920Jy sigma=0.000632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.692 mas, bmaj=6.812 mas, bpa=-4.977 degrees ! Estimated noise=982.185 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.84981e-05 Jy ! Component: 100 - total flux cleaned = 1.90247e-05 Jy ! Component: 150 - total flux cleaned = -3.77586e-06 Jy ! Component: 200 - total flux cleaned = -4.32618e-05 Jy ! Total flux subtracted in 200 components = -4.32618e-05 Jy ! Clean residual min=-0.002730 max=0.002571 Jy/beam ! Clean residual mean=0.000002 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0788926 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 23 components and 0.0788927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124910Jy sigma=0.000632 ! Fit after self-cal, rms=0.124636Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124636Jy sigma=0.000632 ! Fit after self-cal, rms=0.123322Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=6.777 mas, bpa=-5.074 degrees ! Estimated noise=981.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.21188e-05 Jy ! Component: 100 - total flux cleaned = -1.13734e-05 Jy ! Component: 150 - total flux cleaned = -2.79414e-05 Jy ! Component: 200 - total flux cleaned = -5.48385e-05 Jy ! Total flux subtracted in 200 components = -5.48385e-05 Jy ! Clean residual min=-0.002610 max=0.002402 Jy/beam ! Clean residual mean=0.000001 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0788378 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0788378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123317Jy sigma=0.000631 ! Fit after self-cal, rms=0.123263Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.78171e-05 Jy ! Component: 100 - total flux cleaned = -0.00013891 Jy ! Component: 150 - total flux cleaned = -0.000150383 Jy ! Component: 200 - total flux cleaned = -0.000161122 Jy ! Total flux subtracted in 200 components = -0.000161122 Jy ! Clean residual min=-0.002619 max=0.002358 Jy/beam ! Clean residual mean=0.000000 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0786767 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.0786767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123260Jy sigma=0.000631 ! Fit after self-cal, rms=0.123255Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123255Jy sigma=0.000631 ! Fit after self-cal, rms=0.122949Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=6.766 mas, bpa=-5.111 degrees ! Estimated noise=980.758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224295 Jy ! Component: 100 - total flux cleaned = -0.00024779 Jy ! Component: 150 - total flux cleaned = -0.000268094 Jy ! Component: 200 - total flux cleaned = -0.000277775 Jy ! Total flux subtracted in 200 components = -0.000277775 Jy ! Clean residual min=-0.002519 max=0.002484 Jy/beam ! Clean residual mean=0.000000 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0783989 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0783989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122947Jy sigma=0.000630 ! Fit after self-cal, rms=0.122952Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.35779e-05 Jy ! Component: 100 - total flux cleaned = -0.000121701 Jy ! Component: 150 - total flux cleaned = -0.000130579 Jy ! Component: 200 - total flux cleaned = -0.00014735 Jy ! Total flux subtracted in 200 components = -0.00014735 Jy ! Clean residual min=-0.002523 max=0.002509 Jy/beam ! Clean residual mean=0.000000 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0782516 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0782516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122951Jy sigma=0.000630 ! Fit after self-cal, rms=0.122951Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122951Jy sigma=0.000630 ! Fit after self-cal, rms=0.122973Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.418 mas, bmaj=13.26 mas, bpa=2.609 degrees ! Estimated noise=1424.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.3797e-05 Jy ! Component: 100 - total flux cleaned = -3.36744e-05 Jy ! Component: 150 - total flux cleaned = -4.08692e-05 Jy ! Component: 200 - total flux cleaned = -4.66911e-05 Jy ! Total flux subtracted in 200 components = -4.66911e-05 Jy ! Clean residual min=-0.003305 max=0.003121 Jy/beam ! Clean residual mean=0.000001 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.0782049 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0782049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122973Jy sigma=0.000630 ! Fit after self-cal, rms=0.122987Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.69571e-05 Jy ! Component: 100 - total flux cleaned = -2.95255e-07 Jy ! Component: 150 - total flux cleaned = 5.60625e-06 Jy ! Component: 200 - total flux cleaned = 1.03122e-05 Jy ! Total flux subtracted in 200 components = 1.03122e-05 Jy ! Clean residual min=-0.003315 max=0.003149 Jy/beam ! Clean residual mean=0.000001 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.0782152 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.0782152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122987Jy sigma=0.000630 ! Fit after self-cal, rms=0.122989Jy sigma=0.000630 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=6.766 mas, bpa=-5.131 degrees ! Estimated noise=980.732 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.688 x 6.766 at -5.131 degrees (North through East) ! Clean map min=-0.0024207 max=0.079555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.278 mas, bmaj=6.07 mas, bpa=-5.97 degrees ! Estimated noise=1409.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0620045 Jy ! Component: 100 - total flux cleaned = 0.075535 Jy ! Component: 150 - total flux cleaned = 0.0768559 Jy ! Component: 200 - total flux cleaned = 0.0777588 Jy ! Total flux subtracted in 200 components = 0.0777588 Jy ! Clean residual min=-0.003640 max=0.003645 Jy/beam ! Clean residual mean=0.000001 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.0777588 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0777588 Jy ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=6.766 mas, bpa=-5.131 degrees ! Estimated noise=980.732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00042172 Jy ! Component: 100 - total flux cleaned = -0.000118508 Jy ! Component: 150 - total flux cleaned = 5.01114e-05 Jy ! Component: 200 - total flux cleaned = 0.000242269 Jy ! Total flux subtracted in 200 components = 0.000242269 Jy ! Clean residual min=-0.002560 max=0.002375 Jy/beam ! Clean residual mean=0.000001 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0780011 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.0780011 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.418 mas, bmaj=13.26 mas, bpa=2.609 degrees ! Estimated noise=1424.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000371265 Jy ! Component: 100 - total flux cleaned = 0.000368452 Jy ! Component: 150 - total flux cleaned = 0.00036843 Jy ! Component: 200 - total flux cleaned = 0.000368922 Jy ! Total flux subtracted in 200 components = 0.000368922 Jy ! Clean residual min=-0.003352 max=0.003106 Jy/beam ! Clean residual mean=0.000001 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.07837 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50552e-06 Jy ! Component: 100 - total flux cleaned = 1.79726e-06 Jy ! Component: 150 - total flux cleaned = -6.58785e-06 Jy ! Component: 200 - total flux cleaned = -1.40798e-05 Jy ! Total flux subtracted in 200 components = -1.40798e-05 Jy ! Clean residual min=-0.003331 max=0.003123 Jy/beam ! Clean residual mean=0.000001 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.0783559 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.0783559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.688 mas, bmaj=6.766 mas, bpa=-5.131 degrees ! Estimated noise=980.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.57067e-05 Jy ! Component: 100 - total flux cleaned = -8.8681e-05 Jy ! Component: 150 - total flux cleaned = -0.000106449 Jy ! Component: 200 - total flux cleaned = -9.28824e-05 Jy ! Total flux subtracted in 200 components = -9.28824e-05 Jy ! Clean residual min=-0.002536 max=0.002495 Jy/beam ! Clean residual mean=0.000001 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0782631 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.0782631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122994Jy sigma=0.000630 ! Fit after self-cal, rms=0.122996Jy sigma=0.000630 wmodel J2200-1632_S_2017_01_21_pus_map.mod ! Writing 48 model components to file: J2200-1632_S_2017_01_21_pus_map.mod wobs J2200-1632_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2200-1632_S_2017_01_21_pus_uvs.fits wwins J2200-1632_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2200-1632_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370986 Jy ! Component: 100 - total flux cleaned = -0.000332505 Jy ! Component: 150 - total flux cleaned = -9.16012e-05 Jy ! Component: 200 - total flux cleaned = -1.41613e-05 Jy ! Component: 250 - total flux cleaned = 0.000245893 Jy ! Component: 300 - total flux cleaned = 0.000281695 Jy ! Component: 350 - total flux cleaned = 0.000386692 Jy ! Component: 400 - total flux cleaned = 0.000589586 Jy ! Component: 450 - total flux cleaned = 0.000688378 Jy ! Component: 500 - total flux cleaned = 0.000849865 Jy ! Component: 550 - total flux cleaned = 0.000913087 Jy ! Component: 600 - total flux cleaned = 0.000944069 Jy ! Component: 650 - total flux cleaned = 0.00103517 Jy ! Component: 700 - total flux cleaned = 0.00115453 Jy ! Component: 750 - total flux cleaned = 0.0013298 Jy ! Component: 800 - total flux cleaned = 0.00147315 Jy ! Component: 850 - total flux cleaned = 0.00147323 Jy ! Component: 900 - total flux cleaned = 0.00155704 Jy ! Component: 950 - total flux cleaned = 0.00163912 Jy ! Component: 1000 - total flux cleaned = 0.00163945 Jy ! Component: 1050 - total flux cleaned = 0.00177253 Jy ! Component: 1100 - total flux cleaned = 0.00185152 Jy ! Component: 1150 - total flux cleaned = 0.00195509 Jy ! Component: 1200 - total flux cleaned = 0.00198096 Jy ! Component: 1250 - total flux cleaned = 0.00203092 Jy ! Component: 1300 - total flux cleaned = 0.00205613 Jy ! Component: 1350 - total flux cleaned = 0.00205639 Jy ! Component: 1400 - total flux cleaned = 0.00215333 Jy ! Component: 1450 - total flux cleaned = 0.00213001 Jy ! Component: 1500 - total flux cleaned = 0.00222452 Jy ! Component: 1550 - total flux cleaned = 0.00231798 Jy ! Component: 1600 - total flux cleaned = 0.00227205 Jy ! Component: 1650 - total flux cleaned = 0.00231753 Jy ! Component: 1700 - total flux cleaned = 0.0023854 Jy ! Component: 1750 - total flux cleaned = 0.00240764 Jy ! Component: 1800 - total flux cleaned = 0.00242977 Jy ! Component: 1850 - total flux cleaned = 0.00245159 Jy ! Component: 1900 - total flux cleaned = 0.00249446 Jy ! Component: 1950 - total flux cleaned = 0.00249419 Jy ! Component: 2000 - total flux cleaned = 0.00245264 Jy ! Component: 2050 - total flux cleaned = 0.00247396 Jy ! Component: 2100 - total flux cleaned = 0.0024534 Jy ! Component: 2150 - total flux cleaned = 0.00243311 Jy ! Component: 2200 - total flux cleaned = 0.00245339 Jy ! Component: 2250 - total flux cleaned = 0.00235382 Jy ! Component: 2300 - total flux cleaned = 0.00241334 Jy ! Component: 2350 - total flux cleaned = 0.00239381 Jy ! Component: 2400 - total flux cleaned = 0.00237436 Jy ! Component: 2450 - total flux cleaned = 0.00235505 Jy ! Component: 2500 - total flux cleaned = 0.00231697 Jy ! Component: 2550 - total flux cleaned = 0.0023359 Jy ! Component: 2600 - total flux cleaned = 0.0022609 Jy ! Component: 2650 - total flux cleaned = 0.00224223 Jy ! Component: 2700 - total flux cleaned = 0.00216851 Jy ! Component: 2750 - total flux cleaned = 0.00211365 Jy ! Component: 2800 - total flux cleaned = 0.00202349 Jy ! Component: 2850 - total flux cleaned = 0.00202333 Jy ! Component: 2900 - total flux cleaned = 0.00198771 Jy ! Component: 2950 - total flux cleaned = 0.00195228 Jy ! Component: 3000 - total flux cleaned = 0.0018822 Jy ! Component: 3050 - total flux cleaned = 0.00186489 Jy ! Component: 3100 - total flux cleaned = 0.00183039 Jy ! Component: 3150 - total flux cleaned = 0.00179634 Jy ! Component: 3200 - total flux cleaned = 0.0017453 Jy ! Component: 3250 - total flux cleaned = 0.00174506 Jy ! Component: 3300 - total flux cleaned = 0.00166133 Jy ! Component: 3350 - total flux cleaned = 0.00162838 Jy ! Component: 3400 - total flux cleaned = 0.00156263 Jy ! Component: 3450 - total flux cleaned = 0.00153014 Jy ! Component: 3500 - total flux cleaned = 0.00144904 Jy ! Component: 3550 - total flux cleaned = 0.00138464 Jy ! Component: 3600 - total flux cleaned = 0.0013686 Jy ! Component: 3650 - total flux cleaned = 0.00135252 Jy ! Component: 3700 - total flux cleaned = 0.0012421 Jy ! Component: 3750 - total flux cleaned = 0.00117953 Jy ! Component: 3800 - total flux cleaned = 0.00107077 Jy ! Component: 3850 - total flux cleaned = 0.00100915 Jy ! Component: 3900 - total flux cleaned = 0.000947872 Jy ! Component: 3950 - total flux cleaned = 0.000856508 Jy ! Component: 4000 - total flux cleaned = 0.000871655 Jy ! Component: 4050 - total flux cleaned = 0.000781427 Jy ! Total flux subtracted in 4096 components = 0.000706827 Jy ! Clean residual min=-0.000955 max=0.000973 Jy/beam ! Clean residual mean=0.000000 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.0789699 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 341 components and 0.0789699 Jy ![Exited script file: muppet] wmap "J2200-1632_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.688 x 6.766 at -5.131 degrees (North through East) ! Clean map min=-0.0016154 max=0.079601 Jy/beam ! Writing clean map to FITS file: J2200-1632_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0796008 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000267665 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00878 1.00878 2.01755 4.03511 8.07022 16.1404 32.2809 64.5618 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.688 x 6.766 at -5.131 degrees (North through East) ! Clean map min=-0.0016154 max=0.079601 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2200-1632_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:04:58 2019