! Started logfile: J2200+1030_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:23:24 2019 obs J2200+1030_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2200+1030_S_2017_01_16_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.716084 visibilities/baseline/integration-bin. ! Found source: J2200+1030 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 18432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2200+1030_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 510 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938497Jy sigma=0.007150 ! Fit after self-cal, rms=0.910999Jy sigma=0.007044 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=8.319 mas, bpa=18.87 degrees ! Estimated noise=1136.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0800706 Jy ! Component: 100 - total flux cleaned = 0.097537 Jy ! Total flux subtracted in 100 components = 0.097537 Jy ! Clean residual min=-0.004355 max=0.004905 Jy/beam ! Clean residual mean=0.000004 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.097537 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.097537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166661Jy sigma=0.000666 ! Fit after self-cal, rms=0.166634Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.096 mas, bmaj=8.721 mas, bpa=16.84 degrees ! Estimated noise=735.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0034886 Jy ! Component: 100 - total flux cleaned = 0.00365559 Jy ! Component: 150 - total flux cleaned = 0.00359491 Jy ! Component: 200 - total flux cleaned = 0.00359366 Jy ! Total flux subtracted in 200 components = 0.00359366 Jy ! Clean residual min=-0.003492 max=0.003941 Jy/beam ! Clean residual mean=0.000016 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.101131 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.101131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166404Jy sigma=0.000664 ! Fit after self-cal, rms=0.166401Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 0.98 KP 0.95 ! LA 0.98 MK 1.00* NL 0.86 OV 0.99 ! PT 1.24 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.00 KP 0.92 ! LA 0.92 MK 1.00* NL 1.03 OV 1.02 ! PT 1.26 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.97 HN 1.03 KP 0.96 ! LA 1.02 MK 1.00* NL 0.97 OV 0.92 ! PT 1.22 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.95 KP 1.00* ! LA 0.94 MK 1.00* NL 1.00* OV 0.92 ! PT 1.07 SC 1.05 ! ! ! Fit before self-cal, rms=0.166401Jy sigma=0.000664 ! Fit after self-cal, rms=0.171816Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=8.7 mas, bpa=16.54 degrees ! Estimated noise=732.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175778 Jy ! Component: 100 - total flux cleaned = 8.30446e-05 Jy ! Component: 150 - total flux cleaned = 2.35023e-05 Jy ! Component: 200 - total flux cleaned = -4.9329e-05 Jy ! Total flux subtracted in 200 components = -4.9329e-05 Jy ! Clean residual min=-0.002685 max=0.003104 Jy/beam ! Clean residual mean=0.000019 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.101081 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 0.101081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171754Jy sigma=0.000659 ! Fit after self-cal, rms=0.171887Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171887Jy sigma=0.000659 ! Fit after self-cal, rms=0.126110Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.092 mas, bmaj=8.691 mas, bpa=16.45 degrees ! Estimated noise=732.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00075957 Jy ! Component: 100 - total flux cleaned = 0.000820726 Jy ! Component: 150 - total flux cleaned = 0.00082004 Jy ! Component: 200 - total flux cleaned = 0.000833072 Jy ! Total flux subtracted in 200 components = 0.000833072 Jy ! Clean residual min=-0.001958 max=0.001882 Jy/beam ! Clean residual mean=0.000005 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.101914 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.101914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126103Jy sigma=0.000653 ! Fit after self-cal, rms=0.126210Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.03728e-05 Jy ! Component: 100 - total flux cleaned = -2.0852e-05 Jy ! Component: 150 - total flux cleaned = -9.31997e-06 Jy ! Component: 200 - total flux cleaned = -9.4565e-06 Jy ! Total flux subtracted in 200 components = -9.4565e-06 Jy ! Clean residual min=-0.001951 max=0.001780 Jy/beam ! Clean residual mean=0.000005 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.101905 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.101905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126207Jy sigma=0.000653 ! Fit after self-cal, rms=0.126207Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126207Jy sigma=0.000653 ! Fit after self-cal, rms=0.127804Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.087 mas, bmaj=8.679 mas, bpa=16.4 degrees ! Estimated noise=732.695 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349511 Jy ! Component: 100 - total flux cleaned = 0.000408497 Jy ! Component: 150 - total flux cleaned = 0.000440329 Jy ! Component: 200 - total flux cleaned = 0.000479489 Jy ! Total flux subtracted in 200 components = 0.000479489 Jy ! Clean residual min=-0.001870 max=0.001803 Jy/beam ! Clean residual mean=0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.102384 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.102384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127801Jy sigma=0.000653 ! Fit after self-cal, rms=0.127806Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35176e-06 Jy ! Component: 100 - total flux cleaned = 1.77615e-05 Jy ! Component: 150 - total flux cleaned = 2.63453e-05 Jy ! Component: 200 - total flux cleaned = 3.49471e-05 Jy ! Total flux subtracted in 200 components = 3.49471e-05 Jy ! Clean residual min=-0.001862 max=0.001791 Jy/beam ! Clean residual mean=0.000004 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.102419 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.102419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127804Jy sigma=0.000653 ! Fit after self-cal, rms=0.127803Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127803Jy sigma=0.000653 ! Fit after self-cal, rms=0.128038Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.549 mas, bmaj=10.57 mas, bpa=4.136 degrees ! Estimated noise=889.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000437531 Jy ! Component: 100 - total flux cleaned = 0.000410598 Jy ! Component: 150 - total flux cleaned = 0.000400441 Jy ! Component: 200 - total flux cleaned = 0.000400523 Jy ! Total flux subtracted in 200 components = 0.000400523 Jy ! Clean residual min=-0.001954 max=0.001890 Jy/beam ! Clean residual mean=0.000008 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.10282 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.10282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128035Jy sigma=0.000653 ! Fit after self-cal, rms=0.128033Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.55809e-05 Jy ! Component: 100 - total flux cleaned = 6.39638e-05 Jy ! Component: 150 - total flux cleaned = 7.11589e-05 Jy ! Component: 200 - total flux cleaned = 7.10383e-05 Jy ! Total flux subtracted in 200 components = 7.10383e-05 Jy ! Clean residual min=-0.001958 max=0.001910 Jy/beam ! Clean residual mean=0.000008 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.102891 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 0.102891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128033Jy sigma=0.000653 ! Fit after self-cal, rms=0.128031Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=8.672 mas, bpa=16.36 degrees ! Estimated noise=733.307 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.085 x 8.672 at 16.36 degrees (North through East) ! Clean map min=-0.0022613 max=0.10143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.397 mas, bmaj=8.28 mas, bpa=18.63 degrees ! Estimated noise=1116.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0787027 Jy ! Component: 100 - total flux cleaned = 0.0959324 Jy ! Component: 150 - total flux cleaned = 0.101535 Jy ! Component: 200 - total flux cleaned = 0.102819 Jy ! Total flux subtracted in 200 components = 0.102819 Jy ! Clean residual min=-0.002532 max=0.002424 Jy/beam ! Clean residual mean=-0.000001 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.102819 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.102819 Jy ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=8.672 mas, bpa=16.36 degrees ! Estimated noise=733.307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.41467e-06 Jy ! Component: 100 - total flux cleaned = 0.000103281 Jy ! Component: 150 - total flux cleaned = 2.97997e-05 Jy ! Component: 200 - total flux cleaned = -5.54053e-05 Jy ! Total flux subtracted in 200 components = -5.54053e-05 Jy ! Clean residual min=-0.001944 max=0.001806 Jy/beam ! Clean residual mean=0.000004 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.102764 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.102764 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.549 mas, bmaj=10.57 mas, bpa=4.136 degrees ! Estimated noise=889.499 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283381 Jy ! Component: 100 - total flux cleaned = 0.000284209 Jy ! Component: 150 - total flux cleaned = 0.000252718 Jy ! Component: 200 - total flux cleaned = 0.00023841 Jy ! Total flux subtracted in 200 components = 0.00023841 Jy ! Clean residual min=-0.001983 max=0.001837 Jy/beam ! Clean residual mean=0.000008 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.103002 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.64543e-05 Jy ! Component: 100 - total flux cleaned = -3.87433e-05 Jy ! Component: 150 - total flux cleaned = -6.09541e-05 Jy ! Component: 200 - total flux cleaned = -7.12142e-05 Jy ! Total flux subtracted in 200 components = -7.12142e-05 Jy ! Clean residual min=-0.001964 max=0.001864 Jy/beam ! Clean residual mean=0.000008 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.102931 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.102931 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=8.672 mas, bpa=16.36 degrees ! Estimated noise=733.307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255815 Jy ! Component: 100 - total flux cleaned = -0.000238834 Jy ! Component: 150 - total flux cleaned = -0.000239013 Jy ! Component: 200 - total flux cleaned = -0.000252451 Jy ! Total flux subtracted in 200 components = -0.000252451 Jy ! Clean residual min=-0.001882 max=0.001796 Jy/beam ! Clean residual mean=0.000004 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.102679 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.102679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128039Jy sigma=0.000653 ! Fit after self-cal, rms=0.128033Jy sigma=0.000653 wmodel J2200+1030_S_2017_01_16_pus_map.mod ! Writing 41 model components to file: J2200+1030_S_2017_01_16_pus_map.mod wobs J2200+1030_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2200+1030_S_2017_01_16_pus_uvs.fits wwins J2200+1030_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J2200+1030_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000417632 Jy ! Component: 100 - total flux cleaned = -0.000671301 Jy ! Component: 150 - total flux cleaned = -0.000821224 Jy ! Component: 200 - total flux cleaned = -0.00107729 Jy ! Component: 250 - total flux cleaned = -0.00124065 Jy ! Component: 300 - total flux cleaned = -0.00147588 Jy ! Component: 350 - total flux cleaned = -0.00167739 Jy ! Component: 400 - total flux cleaned = -0.00182386 Jy ! Component: 450 - total flux cleaned = -0.00203707 Jy ! Component: 500 - total flux cleaned = -0.00219896 Jy ! Component: 550 - total flux cleaned = -0.00238004 Jy ! Component: 600 - total flux cleaned = -0.00257942 Jy ! Component: 650 - total flux cleaned = -0.00275285 Jy ! Component: 700 - total flux cleaned = -0.00296528 Jy ! Component: 750 - total flux cleaned = -0.00327748 Jy ! Component: 800 - total flux cleaned = -0.00342081 Jy ! Component: 850 - total flux cleaned = -0.00362235 Jy ! Component: 900 - total flux cleaned = -0.00386046 Jy ! Component: 950 - total flux cleaned = -0.00403602 Jy ! Component: 1000 - total flux cleaned = -0.00419 Jy ! Component: 1050 - total flux cleaned = -0.00439886 Jy ! Component: 1100 - total flux cleaned = -0.00452966 Jy ! Component: 1150 - total flux cleaned = -0.00460387 Jy ! Component: 1200 - total flux cleaned = -0.00473124 Jy ! Component: 1250 - total flux cleaned = -0.004749 Jy ! Component: 1300 - total flux cleaned = -0.00485605 Jy ! Component: 1350 - total flux cleaned = -0.00490904 Jy ! Component: 1400 - total flux cleaned = -0.00496175 Jy ! Component: 1450 - total flux cleaned = -0.00504789 Jy ! Component: 1500 - total flux cleaned = -0.00514998 Jy ! Component: 1550 - total flux cleaned = -0.00516668 Jy ! Component: 1600 - total flux cleaned = -0.00526647 Jy ! Component: 1650 - total flux cleaned = -0.00526632 Jy ! Component: 1700 - total flux cleaned = -0.00524999 Jy ! Component: 1750 - total flux cleaned = -0.00536304 Jy ! Component: 1800 - total flux cleaned = -0.00536309 Jy ! Component: 1850 - total flux cleaned = -0.00544246 Jy ! Component: 1900 - total flux cleaned = -0.00544232 Jy ! Component: 1950 - total flux cleaned = -0.00544231 Jy ! Component: 2000 - total flux cleaned = -0.00539614 Jy ! Component: 2050 - total flux cleaned = -0.00535058 Jy ! Component: 2100 - total flux cleaned = -0.0054113 Jy ! Component: 2150 - total flux cleaned = -0.00538126 Jy ! Component: 2200 - total flux cleaned = -0.00544082 Jy ! Component: 2250 - total flux cleaned = -0.00545546 Jy ! Component: 2300 - total flux cleaned = -0.00542608 Jy ! Component: 2350 - total flux cleaned = -0.00542622 Jy ! Component: 2400 - total flux cleaned = -0.00545507 Jy ! Component: 2450 - total flux cleaned = -0.00551216 Jy ! Component: 2500 - total flux cleaned = -0.00554063 Jy ! Component: 2550 - total flux cleaned = -0.00555483 Jy ! Component: 2600 - total flux cleaned = -0.00558254 Jy ! Component: 2650 - total flux cleaned = -0.00562415 Jy ! Component: 2700 - total flux cleaned = -0.00558283 Jy ! Component: 2750 - total flux cleaned = -0.00563765 Jy ! Component: 2800 - total flux cleaned = -0.00563755 Jy ! Component: 2850 - total flux cleaned = -0.00565097 Jy ! Component: 2900 - total flux cleaned = -0.00566446 Jy ! Component: 2950 - total flux cleaned = -0.00563795 Jy ! Component: 3000 - total flux cleaned = -0.00567779 Jy ! Component: 3050 - total flux cleaned = -0.0057039 Jy ! Component: 3100 - total flux cleaned = -0.00574299 Jy ! Component: 3150 - total flux cleaned = -0.00574295 Jy ! Component: 3200 - total flux cleaned = -0.0057558 Jy ! Component: 3250 - total flux cleaned = -0.00583232 Jy ! Component: 3300 - total flux cleaned = -0.00579419 Jy ! Component: 3350 - total flux cleaned = -0.00578154 Jy ! Component: 3400 - total flux cleaned = -0.00575651 Jy ! Component: 3450 - total flux cleaned = -0.0057937 Jy ! Component: 3500 - total flux cleaned = -0.00575663 Jy ! Component: 3550 - total flux cleaned = -0.00574444 Jy ! Component: 3600 - total flux cleaned = -0.0057567 Jy ! Component: 3650 - total flux cleaned = -0.00573254 Jy ! Component: 3700 - total flux cleaned = -0.00573253 Jy ! Component: 3750 - total flux cleaned = -0.00574456 Jy ! Component: 3800 - total flux cleaned = -0.0057564 Jy ! Component: 3850 - total flux cleaned = -0.00575635 Jy ! Component: 3900 - total flux cleaned = -0.00573281 Jy ! Component: 3950 - total flux cleaned = -0.0057328 Jy ! Component: 4000 - total flux cleaned = -0.00575594 Jy ! Component: 4050 - total flux cleaned = -0.00574438 Jy ! Total flux subtracted in 4096 components = -0.00572153 Jy ! Clean residual min=-0.000615 max=0.000886 Jy/beam ! Clean residual mean=0.000002 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.096957 Jy keep ! Adding 312 model components to the UV plane model. ! The established model now contains 353 components and 0.096957 Jy ![Exited script file: muppet] wmap "J2200+1030_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.085 x 8.672 at 16.36 degrees (North through East) ! Clean map min=-0.0021056 max=0.10114 Jy/beam ! Writing clean map to FITS file: J2200+1030_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000224033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.664535 0.664535 1.32907 2.65814 5.31628 10.6326 21.2651 42.5303 85.0605 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.085 x 8.672 at 16.36 degrees (North through East) ! Clean map min=-0.0021056 max=0.10114 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2200+1030_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:23:30 2019