! Started logfile: J2157-1319_S_2017_09_26_pus_uvs.log on Sat May 11 13:07:27 2019 obs J2157-1319_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2157-1319_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.66629 visibilities/baseline/integration-bin. ! Found source: J2157-1319 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2157-1319_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 467 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 467 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 467 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1797 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952428Jy sigma=0.007439 ! Fit after self-cal, rms=0.923025Jy sigma=0.007218 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=17.68 mas, bpa=-19.21 degrees ! Estimated noise=1084.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615498 Jy ! Component: 100 - total flux cleaned = 0.0752274 Jy ! Total flux subtracted in 100 components = 0.0752274 Jy ! Clean residual min=-0.003860 max=0.004660 Jy/beam ! Clean residual mean=0.000007 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.0752274 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0752274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088777Jy sigma=0.000649 ! Fit after self-cal, rms=0.088682Jy sigma=0.000649 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=19.63 mas, bpa=-18.24 degrees ! Estimated noise=614.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668003 Jy ! Component: 100 - total flux cleaned = 0.00949093 Jy ! Component: 150 - total flux cleaned = 0.0106189 Jy ! Component: 200 - total flux cleaned = 0.0108004 Jy ! Total flux subtracted in 200 components = 0.0108004 Jy ! Clean residual min=-0.002242 max=0.001908 Jy/beam ! Clean residual mean=-0.000002 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0860278 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 52 components and 0.0860278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088218Jy sigma=0.000645 ! Fit after self-cal, rms=0.088217Jy sigma=0.000645 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.97 KP 1.05 ! LA 1.06 MK 1.03 NL 0.93 OV 1.04 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.01 KP 1.01 ! LA 1.01 MK 1.02 NL 1.02 OV 1.06 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.01 KP 1.03 ! LA 0.98 MK 1.03 NL 1.01 OV 0.98 ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 555 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.77 KP 1.00* ! LA 1.00* MK 1.05 NL 1.00* OV 1.00 ! PT 0.92 ! ! ! Fit before self-cal, rms=0.088217Jy sigma=0.000645 ! Fit after self-cal, rms=0.088388Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=19.78 mas, bpa=-18.35 degrees ! Estimated noise=622.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000350696 Jy ! Component: 100 - total flux cleaned = 0.000406218 Jy ! Component: 150 - total flux cleaned = 0.000436746 Jy ! Component: 200 - total flux cleaned = 0.000435843 Jy ! Total flux subtracted in 200 components = 0.000435843 Jy ! Clean residual min=-0.001513 max=0.001541 Jy/beam ! Clean residual mean=0.000000 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0864637 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.0864637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088378Jy sigma=0.000647 ! Fit after self-cal, rms=0.088397Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088397Jy sigma=0.000647 ! Fit after self-cal, rms=0.089171Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=19.74 mas, bpa=-18.32 degrees ! Estimated noise=624.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175829 Jy ! Component: 100 - total flux cleaned = 0.000293482 Jy ! Component: 150 - total flux cleaned = 0.000358604 Jy ! Component: 200 - total flux cleaned = 0.000386983 Jy ! Total flux subtracted in 200 components = 0.000386983 Jy ! Clean residual min=-0.001519 max=0.001502 Jy/beam ! Clean residual mean=0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0868506 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 0.0868506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089166Jy sigma=0.000647 ! Fit after self-cal, rms=0.089189Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.42067e-05 Jy ! Component: 100 - total flux cleaned = 7.12214e-05 Jy ! Component: 150 - total flux cleaned = 0.000112911 Jy ! Component: 200 - total flux cleaned = 0.000143716 Jy ! Total flux subtracted in 200 components = 0.000143716 Jy ! Clean residual min=-0.001502 max=0.001494 Jy/beam ! Clean residual mean=0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0869944 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.0869944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089187Jy sigma=0.000647 ! Fit after self-cal, rms=0.089188Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089188Jy sigma=0.000647 ! Fit after self-cal, rms=0.089607Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=19.75 mas, bpa=-18.32 degrees ! Estimated noise=626.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000345228 Jy ! Component: 100 - total flux cleaned = 0.000416187 Jy ! Component: 150 - total flux cleaned = 0.000432065 Jy ! Component: 200 - total flux cleaned = 0.000453972 Jy ! Total flux subtracted in 200 components = 0.000453972 Jy ! Clean residual min=-0.001507 max=0.001483 Jy/beam ! Clean residual mean=0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0874483 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.0874483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089602Jy sigma=0.000647 ! Fit after self-cal, rms=0.089607Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.65023e-05 Jy ! Component: 100 - total flux cleaned = 4.56879e-05 Jy ! Component: 150 - total flux cleaned = 6.55872e-05 Jy ! Component: 200 - total flux cleaned = 7.18771e-05 Jy ! Total flux subtracted in 200 components = 7.18771e-05 Jy ! Clean residual min=-0.001498 max=0.001481 Jy/beam ! Clean residual mean=0.000000 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0875202 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.0875202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089606Jy sigma=0.000647 ! Fit after self-cal, rms=0.089606Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089606Jy sigma=0.000647 ! Fit after self-cal, rms=0.089956Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.257 mas, bmaj=24.19 mas, bpa=-11.79 degrees ! Estimated noise=763.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201516 Jy ! Component: 100 - total flux cleaned = 0.000210269 Jy ! Component: 150 - total flux cleaned = 0.000197951 Jy ! Component: 200 - total flux cleaned = 0.000181552 Jy ! Total flux subtracted in 200 components = 0.000181552 Jy ! Clean residual min=-0.001725 max=0.001467 Jy/beam ! Clean residual mean=0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0877018 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 121 components and 0.0877018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089955Jy sigma=0.000647 ! Fit after self-cal, rms=0.089955Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.14773e-05 Jy ! Component: 100 - total flux cleaned = -2.20596e-05 Jy ! Component: 150 - total flux cleaned = -3.61076e-05 Jy ! Component: 200 - total flux cleaned = -4.45145e-05 Jy ! Total flux subtracted in 200 components = -4.45145e-05 Jy ! Clean residual min=-0.001716 max=0.001464 Jy/beam ! Clean residual mean=0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0876573 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 0.0876573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089954Jy sigma=0.000647 ! Fit after self-cal, rms=0.089955Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=19.76 mas, bpa=-18.31 degrees ! Estimated noise=629.362 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 19.76 at -18.31 degrees (North through East) ! Clean map min=-0.0014585 max=0.079999 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.744 mas, bmaj=17.84 mas, bpa=-19.4 degrees ! Estimated noise=1114.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617529 Jy ! Component: 100 - total flux cleaned = 0.0754873 Jy ! Component: 150 - total flux cleaned = 0.0805508 Jy ! Component: 200 - total flux cleaned = 0.0834688 Jy ! Total flux subtracted in 200 components = 0.0834688 Jy ! Clean residual min=-0.003113 max=0.003171 Jy/beam ! Clean residual mean=0.000003 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.0834688 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0834688 Jy ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=19.76 mas, bpa=-18.31 degrees ! Estimated noise=629.362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283039 Jy ! Component: 100 - total flux cleaned = 0.00404172 Jy ! Component: 150 - total flux cleaned = 0.00433334 Jy ! Component: 200 - total flux cleaned = 0.00453472 Jy ! Total flux subtracted in 200 components = 0.00453472 Jy ! Clean residual min=-0.001560 max=0.001575 Jy/beam ! Clean residual mean=0.000000 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.0880035 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 63 components and 0.0880035 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.257 mas, bmaj=24.19 mas, bpa=-11.79 degrees ! Estimated noise=763.027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.74544e-05 Jy ! Component: 100 - total flux cleaned = -0.000106124 Jy ! Component: 150 - total flux cleaned = -0.000133048 Jy ! Component: 200 - total flux cleaned = -0.000155508 Jy ! Total flux subtracted in 200 components = -0.000155508 Jy ! Clean residual min=-0.001768 max=0.001498 Jy/beam ! Clean residual mean=0.000001 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 0.087848 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.87362e-05 Jy ! Component: 100 - total flux cleaned = -2.65412e-05 Jy ! Component: 150 - total flux cleaned = -3.3766e-05 Jy ! Component: 200 - total flux cleaned = -4.02832e-05 Jy ! Total flux subtracted in 200 components = -4.02832e-05 Jy ! Clean residual min=-0.001757 max=0.001482 Jy/beam ! Clean residual mean=0.000001 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0878077 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 91 components and 0.0878077 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=19.76 mas, bpa=-18.31 degrees ! Estimated noise=629.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.55109e-05 Jy ! Component: 100 - total flux cleaned = -2.42072e-05 Jy ! Component: 150 - total flux cleaned = -2.38447e-05 Jy ! Component: 200 - total flux cleaned = -1.47973e-05 Jy ! Total flux subtracted in 200 components = -1.47973e-05 Jy ! Clean residual min=-0.001544 max=0.001536 Jy/beam ! Clean residual mean=0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.0877929 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 0.0877929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089955Jy sigma=0.000647 ! Fit after self-cal, rms=0.089953Jy sigma=0.000647 wmodel J2157-1319_S_2017_09_26_pus_map.mod ! Writing 104 model components to file: J2157-1319_S_2017_09_26_pus_map.mod wobs J2157-1319_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2157-1319_S_2017_09_26_pus_uvs.fits wwins J2157-1319_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2157-1319_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241811 Jy ! Component: 100 - total flux cleaned = 0.000598158 Jy ! Component: 150 - total flux cleaned = 0.000664678 Jy ! Component: 200 - total flux cleaned = 0.000830355 Jy ! Component: 250 - total flux cleaned = 0.000948294 Jy ! Component: 300 - total flux cleaned = 0.00106118 Jy ! Component: 350 - total flux cleaned = 0.00109704 Jy ! Component: 400 - total flux cleaned = 0.00111381 Jy ! Component: 450 - total flux cleaned = 0.00111312 Jy ! Component: 500 - total flux cleaned = 0.00116195 Jy ! Component: 550 - total flux cleaned = 0.00117783 Jy ! Component: 600 - total flux cleaned = 0.00116257 Jy ! Component: 650 - total flux cleaned = 0.00113281 Jy ! Component: 700 - total flux cleaned = 0.00111821 Jy ! Component: 750 - total flux cleaned = 0.00110357 Jy ! Component: 800 - total flux cleaned = 0.00103452 Jy ! Component: 850 - total flux cleaned = 0.00103442 Jy ! Component: 900 - total flux cleaned = 0.00102097 Jy ! Component: 950 - total flux cleaned = 0.00103375 Jy ! Component: 1000 - total flux cleaned = 0.00103372 Jy ! Component: 1050 - total flux cleaned = 0.00107087 Jy ! Component: 1100 - total flux cleaned = 0.00109513 Jy ! Component: 1150 - total flux cleaned = 0.00110682 Jy ! Component: 1200 - total flux cleaned = 0.00109503 Jy ! Component: 1250 - total flux cleaned = 0.00110649 Jy ! Component: 1300 - total flux cleaned = 0.00109525 Jy ! Component: 1350 - total flux cleaned = 0.00113977 Jy ! Component: 1400 - total flux cleaned = 0.00110675 Jy ! Component: 1450 - total flux cleaned = 0.00116032 Jy ! Component: 1500 - total flux cleaned = 0.00116008 Jy ! Component: 1550 - total flux cleaned = 0.00118094 Jy ! Component: 1600 - total flux cleaned = 0.00118093 Jy ! Component: 1650 - total flux cleaned = 0.00120126 Jy ! Component: 1700 - total flux cleaned = 0.00124119 Jy ! Component: 1750 - total flux cleaned = 0.00125093 Jy ! Component: 1800 - total flux cleaned = 0.00125083 Jy ! Component: 1850 - total flux cleaned = 0.00125063 Jy ! Component: 1900 - total flux cleaned = 0.00123152 Jy ! Component: 1950 - total flux cleaned = 0.00125036 Jy ! Component: 2000 - total flux cleaned = 0.00124109 Jy ! Component: 2050 - total flux cleaned = 0.00126881 Jy ! Component: 2100 - total flux cleaned = 0.00124131 Jy ! Component: 2150 - total flux cleaned = 0.00125045 Jy ! Component: 2200 - total flux cleaned = 0.00127738 Jy ! Component: 2250 - total flux cleaned = 0.00127739 Jy ! Component: 2300 - total flux cleaned = 0.00130391 Jy ! Component: 2350 - total flux cleaned = 0.00130391 Jy ! Component: 2400 - total flux cleaned = 0.00132133 Jy ! Component: 2450 - total flux cleaned = 0.00134728 Jy ! Component: 2500 - total flux cleaned = 0.00139007 Jy ! Component: 2550 - total flux cleaned = 0.0013731 Jy ! Component: 2600 - total flux cleaned = 0.00141544 Jy ! Component: 2650 - total flux cleaned = 0.00146567 Jy ! Component: 2700 - total flux cleaned = 0.00148226 Jy ! Component: 2750 - total flux cleaned = 0.00149874 Jy ! Component: 2800 - total flux cleaned = 0.00151508 Jy ! Component: 2850 - total flux cleaned = 0.00153133 Jy ! Component: 2900 - total flux cleaned = 0.00153947 Jy ! Component: 2950 - total flux cleaned = 0.00155552 Jy ! Component: 3000 - total flux cleaned = 0.00160338 Jy ! Component: 3050 - total flux cleaned = 0.00159551 Jy ! Component: 3100 - total flux cleaned = 0.001627 Jy ! Component: 3150 - total flux cleaned = 0.00167397 Jy ! Component: 3200 - total flux cleaned = 0.00168172 Jy ! Component: 3250 - total flux cleaned = 0.00168943 Jy ! Component: 3300 - total flux cleaned = 0.00171244 Jy ! Component: 3350 - total flux cleaned = 0.00172772 Jy ! Component: 3400 - total flux cleaned = 0.00173534 Jy ! Component: 3450 - total flux cleaned = 0.00175047 Jy ! Component: 3500 - total flux cleaned = 0.00178051 Jy ! Component: 3550 - total flux cleaned = 0.00181787 Jy ! Component: 3600 - total flux cleaned = 0.00183275 Jy ! Component: 3650 - total flux cleaned = 0.00184023 Jy ! Component: 3700 - total flux cleaned = 0.00184026 Jy ! Component: 3750 - total flux cleaned = 0.00186235 Jy ! Component: 3800 - total flux cleaned = 0.00188436 Jy ! Component: 3850 - total flux cleaned = 0.0018698 Jy ! Component: 3900 - total flux cleaned = 0.00190621 Jy ! Component: 3950 - total flux cleaned = 0.00191352 Jy ! Component: 4000 - total flux cleaned = 0.00192799 Jy ! Component: 4050 - total flux cleaned = 0.00194238 Jy ! Total flux subtracted in 4096 components = 0.00194238 Jy ! Clean residual min=-0.000392 max=0.000492 Jy/beam ! Clean residual mean=0.000000 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0897353 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 368 components and 0.0897353 Jy ![Exited script file: muppet] wmap "J2157-1319_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 19.76 at -18.31 degrees (North through East) ! Clean map min=-0.0010005 max=0.079897 Jy/beam ! Writing clean map to FITS file: J2157-1319_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.079897 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.490544 0.490544 0.981087 1.96217 3.92435 7.8487 15.6974 31.3948 62.7896 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 19.76 at -18.31 degrees (North through East) ! Clean map min=-0.0010005 max=0.079897 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2157-1319_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:07:34 2019