! Started logfile: J2155+1914_S_2017_01_21_pus_uvs.log on Sun May 5 16:04:30 2019 obs J2155+1914_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2155+1914_S_2017_01_21_pus_uva.fits ! AN table 1: 174 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.779534 visibilities/baseline/integration-bin. ! Found source: J2155+1914 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 19532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2155+1914_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 193 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 525 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.952067Jy sigma=0.006937 ! Fit after self-cal, rms=0.926216Jy sigma=0.006805 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=5.531 mas, bpa=-5.502 degrees ! Estimated noise=1117.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0622684 Jy ! Component: 100 - total flux cleaned = 0.0765731 Jy ! Total flux subtracted in 100 components = 0.0765731 Jy ! Clean residual min=-0.004081 max=0.005125 Jy/beam ! Clean residual mean=0.000009 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0765731 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0765731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109064Jy sigma=0.000652 ! Fit after self-cal, rms=0.108835Jy sigma=0.000651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=6.359 mas, bpa=-5.836 degrees ! Estimated noise=772.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543118 Jy ! Component: 100 - total flux cleaned = 0.00658462 Jy ! Component: 150 - total flux cleaned = 0.0064121 Jy ! Component: 200 - total flux cleaned = 0.00632737 Jy ! Total flux subtracted in 200 components = 0.00632737 Jy ! Clean residual min=-0.002822 max=0.002859 Jy/beam ! Clean residual mean=0.000010 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0829005 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 16 components and 0.0829005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108622Jy sigma=0.000649 ! Fit after self-cal, rms=0.108581Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.07 LA 1.01 ! MK 0.97 NL 0.95 OV 1.02 PT 0.97 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.85 HN 1.00 LA 1.01 ! MK 0.96 NL 1.03 OV 1.08 PT 0.95 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 0.98 LA 0.99 ! MK 1.02 NL 1.15 OV 0.92 PT 0.94 ! SC 1.05 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.57 HN 0.97 LA 0.95 ! MK 1.08 NL 1.00* OV 1.00 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.108581Jy sigma=0.000649 ! Fit after self-cal, rms=0.109372Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=6.381 mas, bpa=-5.86 degrees ! Estimated noise=768.356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433237 Jy ! Component: 100 - total flux cleaned = -0.000751364 Jy ! Component: 150 - total flux cleaned = -0.000865323 Jy ! Component: 200 - total flux cleaned = -0.000963294 Jy ! Total flux subtracted in 200 components = -0.000963294 Jy ! Clean residual min=-0.002651 max=0.002821 Jy/beam ! Clean residual mean=0.000009 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0819372 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.0819372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109356Jy sigma=0.000647 ! Fit after self-cal, rms=0.109516Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109516Jy sigma=0.000647 ! Fit after self-cal, rms=0.114863Jy sigma=0.000643 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=6.416 mas, bpa=-5.719 degrees ! Estimated noise=770.564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359729 Jy ! Component: 100 - total flux cleaned = -0.000423108 Jy ! Component: 150 - total flux cleaned = -0.000478026 Jy ! Component: 200 - total flux cleaned = -0.000526917 Jy ! Total flux subtracted in 200 components = -0.000526917 Jy ! Clean residual min=-0.002129 max=0.002017 Jy/beam ! Clean residual mean=-0.000002 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0814103 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.0814103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114855Jy sigma=0.000643 ! Fit after self-cal, rms=0.115045Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.85039e-05 Jy ! Component: 100 - total flux cleaned = -0.000126733 Jy ! Component: 150 - total flux cleaned = -0.000154697 Jy ! Component: 200 - total flux cleaned = -0.000168021 Jy ! Total flux subtracted in 200 components = -0.000168021 Jy ! Clean residual min=-0.002157 max=0.002087 Jy/beam ! Clean residual mean=-0.000001 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0812423 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.0812422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115042Jy sigma=0.000643 ! Fit after self-cal, rms=0.115047Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115047Jy sigma=0.000643 ! Fit after self-cal, rms=0.116366Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=6.428 mas, bpa=-5.622 degrees ! Estimated noise=771.629 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219415 Jy ! Component: 100 - total flux cleaned = -0.000282463 Jy ! Component: 150 - total flux cleaned = -0.000325285 Jy ! Component: 200 - total flux cleaned = -0.000338842 Jy ! Total flux subtracted in 200 components = -0.000338842 Jy ! Clean residual min=-0.002123 max=0.002086 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0809034 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0809034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116361Jy sigma=0.000643 ! Fit after self-cal, rms=0.116385Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.10181e-05 Jy ! Component: 100 - total flux cleaned = -0.000103349 Jy ! Component: 150 - total flux cleaned = -0.000125886 Jy ! Component: 200 - total flux cleaned = -0.000136926 Jy ! Total flux subtracted in 200 components = -0.000136926 Jy ! Clean residual min=-0.002127 max=0.002085 Jy/beam ! Clean residual mean=-0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0807665 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.0807665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116382Jy sigma=0.000643 ! Fit after self-cal, rms=0.116380Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116380Jy sigma=0.000643 ! Fit after self-cal, rms=0.116663Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.804 mas, bmaj=9.786 mas, bpa=-2.416 degrees ! Estimated noise=990.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108676 Jy ! Component: 100 - total flux cleaned = -0.000148304 Jy ! Component: 150 - total flux cleaned = -0.000159053 Jy ! Component: 200 - total flux cleaned = -0.000159206 Jy ! Total flux subtracted in 200 components = -0.000159206 Jy ! Clean residual min=-0.002129 max=0.002020 Jy/beam ! Clean residual mean=-0.000005 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0806073 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.0806073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116663Jy sigma=0.000643 ! Fit after self-cal, rms=0.116668Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.97865e-05 Jy ! Component: 100 - total flux cleaned = 2.69925e-05 Jy ! Component: 150 - total flux cleaned = 2.07553e-05 Jy ! Component: 200 - total flux cleaned = 2.6037e-05 Jy ! Total flux subtracted in 200 components = 2.6037e-05 Jy ! Clean residual min=-0.002124 max=0.002022 Jy/beam ! Clean residual mean=-0.000005 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0806333 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0806333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116670Jy sigma=0.000643 ! Fit after self-cal, rms=0.116670Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=6.435 mas, bpa=-5.503 degrees ! Estimated noise=772.453 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 6.435 at -5.503 degrees (North through East) ! Clean map min=-0.0020303 max=0.080823 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=5.573 mas, bpa=-5.121 degrees ! Estimated noise=1120.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621411 Jy ! Component: 100 - total flux cleaned = 0.0769353 Jy ! Component: 150 - total flux cleaned = 0.0823799 Jy ! Component: 200 - total flux cleaned = 0.0829822 Jy ! Total flux subtracted in 200 components = 0.0829822 Jy ! Clean residual min=-0.003774 max=0.003084 Jy/beam ! Clean residual mean=-0.000001 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0829822 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0829822 Jy ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=6.435 mas, bpa=-5.503 degrees ! Estimated noise=772.453 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000240935 Jy ! Component: 100 - total flux cleaned = -0.000523108 Jy ! Component: 150 - total flux cleaned = -0.00076403 Jy ! Component: 200 - total flux cleaned = -0.000975512 Jy ! Total flux subtracted in 200 components = -0.000975512 Jy ! Clean residual min=-0.002152 max=0.002151 Jy/beam ! Clean residual mean=-0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0820067 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0820067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.804 mas, bmaj=9.786 mas, bpa=-2.416 degrees ! Estimated noise=990.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000790472 Jy ! Component: 100 - total flux cleaned = -0.000912761 Jy ! Component: 150 - total flux cleaned = -0.000993129 Jy ! Component: 200 - total flux cleaned = -0.00105869 Jy ! Total flux subtracted in 200 components = -0.00105869 Jy ! Clean residual min=-0.002120 max=0.002096 Jy/beam ! Clean residual mean=-0.000004 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.080948 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.37792e-05 Jy ! Component: 100 - total flux cleaned = -8.13884e-05 Jy ! Component: 150 - total flux cleaned = -0.000113962 Jy ! Component: 200 - total flux cleaned = -0.000134849 Jy ! Total flux subtracted in 200 components = -0.000134849 Jy ! Clean residual min=-0.002105 max=0.002060 Jy/beam ! Clean residual mean=-0.000004 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0808131 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.0808131 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=6.435 mas, bpa=-5.503 degrees ! Estimated noise=772.453 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.73891e-05 Jy ! Component: 100 - total flux cleaned = -0.000216161 Jy ! Component: 150 - total flux cleaned = -0.000337633 Jy ! Component: 200 - total flux cleaned = -0.000392587 Jy ! Total flux subtracted in 200 components = -0.000392587 Jy ! Clean residual min=-0.002213 max=0.002074 Jy/beam ! Clean residual mean=-0.000001 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0804205 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.0804205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116674Jy sigma=0.000643 ! Fit after self-cal, rms=0.116673Jy sigma=0.000643 wmodel J2155+1914_S_2017_01_21_pus_map.mod ! Writing 41 model components to file: J2155+1914_S_2017_01_21_pus_map.mod wobs J2155+1914_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2155+1914_S_2017_01_21_pus_uvs.fits wwins J2155+1914_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J2155+1914_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000636965 Jy ! Component: 100 - total flux cleaned = -0.000749485 Jy ! Component: 150 - total flux cleaned = -0.00078441 Jy ! Component: 200 - total flux cleaned = -0.00075217 Jy ! Component: 250 - total flux cleaned = -0.000658231 Jy ! Component: 300 - total flux cleaned = -0.000567281 Jy ! Component: 350 - total flux cleaned = -0.000508311 Jy ! Component: 400 - total flux cleaned = -0.000308531 Jy ! Component: 450 - total flux cleaned = -0.000225137 Jy ! Component: 500 - total flux cleaned = -0.000224817 Jy ! Component: 550 - total flux cleaned = -0.000118173 Jy ! Component: 600 - total flux cleaned = -0.000170179 Jy ! Component: 650 - total flux cleaned = -0.000144541 Jy ! Component: 700 - total flux cleaned = -0.000144074 Jy ! Component: 750 - total flux cleaned = -0.000168289 Jy ! Component: 800 - total flux cleaned = -0.000119686 Jy ! Component: 850 - total flux cleaned = -9.53899e-05 Jy ! Component: 900 - total flux cleaned = -9.50159e-05 Jy ! Component: 950 - total flux cleaned = -2.6057e-05 Jy ! Component: 1000 - total flux cleaned = 0.000108743 Jy ! Component: 1050 - total flux cleaned = 0.000219235 Jy ! Component: 1100 - total flux cleaned = 0.000241075 Jy ! Component: 1150 - total flux cleaned = 0.000262805 Jy ! Component: 1200 - total flux cleaned = 0.000369223 Jy ! Component: 1250 - total flux cleaned = 0.000411444 Jy ! Component: 1300 - total flux cleaned = 0.000536064 Jy ! Component: 1350 - total flux cleaned = 0.000680034 Jy ! Component: 1400 - total flux cleaned = 0.000781562 Jy ! Component: 1450 - total flux cleaned = 0.000901546 Jy ! Component: 1500 - total flux cleaned = 0.00100035 Jy ! Component: 1550 - total flux cleaned = 0.00100044 Jy ! Component: 1600 - total flux cleaned = 0.00109727 Jy ! Component: 1650 - total flux cleaned = 0.00117399 Jy ! Component: 1700 - total flux cleaned = 0.00124988 Jy ! Component: 1750 - total flux cleaned = 0.0012687 Jy ! Component: 1800 - total flux cleaned = 0.00141676 Jy ! Component: 1850 - total flux cleaned = 0.00138024 Jy ! Component: 1900 - total flux cleaned = 0.00143501 Jy ! Component: 1950 - total flux cleaned = 0.00154281 Jy ! Component: 2000 - total flux cleaned = 0.00157837 Jy ! Component: 2050 - total flux cleaned = 0.00157821 Jy ! Component: 2100 - total flux cleaned = 0.0015957 Jy ! Component: 2150 - total flux cleaned = 0.00166452 Jy ! Component: 2200 - total flux cleaned = 0.00169838 Jy ! Component: 2250 - total flux cleaned = 0.00166414 Jy ! Component: 2300 - total flux cleaned = 0.0016308 Jy ! Component: 2350 - total flux cleaned = 0.00166412 Jy ! Component: 2400 - total flux cleaned = 0.00166417 Jy ! Component: 2450 - total flux cleaned = 0.00164794 Jy ! Component: 2500 - total flux cleaned = 0.00164794 Jy ! Component: 2550 - total flux cleaned = 0.00158348 Jy ! Component: 2600 - total flux cleaned = 0.00158334 Jy ! Component: 2650 - total flux cleaned = 0.00159913 Jy ! Component: 2700 - total flux cleaned = 0.00156777 Jy ! Component: 2750 - total flux cleaned = 0.00156753 Jy ! Component: 2800 - total flux cleaned = 0.00158301 Jy ! Component: 2850 - total flux cleaned = 0.00158314 Jy ! Component: 2900 - total flux cleaned = 0.00162863 Jy ! Component: 2950 - total flux cleaned = 0.00159847 Jy ! Component: 3000 - total flux cleaned = 0.00165815 Jy ! Component: 3050 - total flux cleaned = 0.00164319 Jy ! Component: 3100 - total flux cleaned = 0.00164319 Jy ! Component: 3150 - total flux cleaned = 0.00165799 Jy ! Component: 3200 - total flux cleaned = 0.00167258 Jy ! Component: 3250 - total flux cleaned = 0.00165816 Jy ! Component: 3300 - total flux cleaned = 0.00168653 Jy ! Component: 3350 - total flux cleaned = 0.00168633 Jy ! Component: 3400 - total flux cleaned = 0.00167222 Jy ! Component: 3450 - total flux cleaned = 0.0017003 Jy ! Component: 3500 - total flux cleaned = 0.00168631 Jy ! Component: 3550 - total flux cleaned = 0.00168632 Jy ! Component: 3600 - total flux cleaned = 0.00171389 Jy ! Component: 3650 - total flux cleaned = 0.00170016 Jy ! Component: 3700 - total flux cleaned = 0.00176806 Jy ! Component: 3750 - total flux cleaned = 0.00176808 Jy ! Component: 3800 - total flux cleaned = 0.00172768 Jy ! Component: 3850 - total flux cleaned = 0.00174101 Jy ! Component: 3900 - total flux cleaned = 0.00170126 Jy ! Component: 3950 - total flux cleaned = 0.00174076 Jy ! Component: 4000 - total flux cleaned = 0.00180606 Jy ! Component: 4050 - total flux cleaned = 0.00175401 Jy ! Total flux subtracted in 4096 components = 0.00177977 Jy ! Clean residual min=-0.000750 max=0.000719 Jy/beam ! Clean residual mean=-0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.0822003 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 302 components and 0.0822003 Jy ![Exited script file: muppet] wmap "J2155+1914_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 6.435 at -5.503 degrees (North through East) ! Clean map min=-0.0015757 max=0.080951 Jy/beam ! Writing clean map to FITS file: J2155+1914_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0809513 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229634 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.851009 0.851009 1.70202 3.40404 6.80807 13.6161 27.2323 54.4646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.148 x 6.435 at -5.503 degrees (North through East) ! Clean map min=-0.0015757 max=0.080951 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2155+1914_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:04:35 2019