! Started logfile: J2154-1501_S_2017_01_21_pus_uvs.log on Sun May 5 16:04:14 2019 obs J2154-1501_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2154-1501_S_2017_01_21_pus_uva.fits ! AN table 1: 102 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.578159 visibilities/baseline/integration-bin. ! Found source: J2154-1501 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2154-1501_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 472 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.930380Jy sigma=0.005589 ! Fit after self-cal, rms=0.893880Jy sigma=0.005420 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=6.352 mas, bpa=-5.337 degrees ! Estimated noise=1945.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0898482 Jy ! Component: 100 - total flux cleaned = 0.113434 Jy ! Total flux subtracted in 100 components = 0.113434 Jy ! Clean residual min=-0.008167 max=0.009574 Jy/beam ! Clean residual mean=-0.000006 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.113434 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.113434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135531Jy sigma=0.000651 ! Fit after self-cal, rms=0.135459Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.734 mas, bmaj=7.033 mas, bpa=-1.723 degrees ! Estimated noise=1429.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104653 Jy ! Component: 100 - total flux cleaned = 0.0135278 Jy ! Component: 150 - total flux cleaned = 0.013445 Jy ! Component: 200 - total flux cleaned = 0.0135123 Jy ! Total flux subtracted in 200 components = 0.0135123 Jy ! Clean residual min=-0.004712 max=0.004924 Jy/beam ! Clean residual mean=-0.000007 rms=0.001170 Jy/beam ! Combined flux in latest and established models = 0.126946 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.126946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135035Jy sigma=0.000644 ! Fit after self-cal, rms=0.135037Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.94 LA 1.01 ! MK 0.97 NL 1.00 OV 1.40 PT 0.98 ! SC 0.97 ! ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 LA 0.98 ! MK 1.01 NL 0.98 OV 1.51 PT 0.95 ! SC 1.03 ! ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.05 LA 0.95 ! MK 1.13 NL 0.99 OV 1.26 PT 0.94 ! SC 0.94 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.95 LA 0.89 ! MK 0.91 NL 1.00* OV 1.03 PT 1.02 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.135037Jy sigma=0.000643 ! Fit after self-cal, rms=0.154765Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=7.066 mas, bpa=-0.7887 degrees ! Estimated noise=1441.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000972932 Jy ! Component: 100 - total flux cleaned = 0.000853932 Jy ! Component: 150 - total flux cleaned = 0.000713715 Jy ! Component: 200 - total flux cleaned = 0.000621198 Jy ! Total flux subtracted in 200 components = 0.000621198 Jy ! Clean residual min=-0.003581 max=0.003607 Jy/beam ! Clean residual mean=-0.000007 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.127567 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 29 components and 0.127567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154743Jy sigma=0.000641 ! Fit after self-cal, rms=0.155131Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155131Jy sigma=0.000641 ! Fit after self-cal, rms=0.157707Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=7.051 mas, bpa=-0.8663 degrees ! Estimated noise=1443.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000782682 Jy ! Component: 100 - total flux cleaned = 0.000661004 Jy ! Component: 150 - total flux cleaned = 0.000581205 Jy ! Component: 200 - total flux cleaned = 0.000510608 Jy ! Total flux subtracted in 200 components = 0.000510608 Jy ! Clean residual min=-0.003482 max=0.003567 Jy/beam ! Clean residual mean=-0.000007 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.128078 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.128078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157689Jy sigma=0.000640 ! Fit after self-cal, rms=0.157716Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 62.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020472 Jy ! Component: 100 - total flux cleaned = 0.00250254 Jy ! Component: 150 - total flux cleaned = 0.00288761 Jy ! Component: 200 - total flux cleaned = 0.00318261 Jy ! Total flux subtracted in 200 components = 0.00318261 Jy ! Clean residual min=-0.003148 max=0.003333 Jy/beam ! Clean residual mean=-0.000007 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.13126 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.13126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157618Jy sigma=0.000640 ! Fit after self-cal, rms=0.157621Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157621Jy sigma=0.000640 ! Fit after self-cal, rms=0.158130Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.052 mas, bpa=-0.9183 degrees ! Estimated noise=1436.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000791312 Jy ! Component: 100 - total flux cleaned = 0.000878008 Jy ! Component: 150 - total flux cleaned = 0.00099052 Jy ! Component: 200 - total flux cleaned = 0.00105694 Jy ! Total flux subtracted in 200 components = 0.00105694 Jy ! Clean residual min=-0.003013 max=0.003223 Jy/beam ! Clean residual mean=-0.000002 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.132317 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.132317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158093Jy sigma=0.000639 ! Fit after self-cal, rms=0.158137Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-109, 75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001752 Jy ! Component: 100 - total flux cleaned = 0.00183324 Jy ! Component: 150 - total flux cleaned = 0.00201327 Jy ! Component: 200 - total flux cleaned = 0.00232057 Jy ! Total flux subtracted in 200 components = 0.00232057 Jy ! Clean residual min=-0.002852 max=0.002835 Jy/beam ! Clean residual mean=-0.000002 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.134638 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.134638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158049Jy sigma=0.000638 ! Fit after self-cal, rms=0.158012Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158012Jy sigma=0.000638 ! Fit after self-cal, rms=0.157872Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.472 mas, bmaj=13.49 mas, bpa=5.682 degrees ! Estimated noise=2030.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016829 Jy ! Component: 100 - total flux cleaned = 0.00284291 Jy ! Component: 150 - total flux cleaned = 0.00361282 Jy ! Component: 200 - total flux cleaned = 0.0041456 Jy ! Total flux subtracted in 200 components = 0.0041456 Jy ! Clean residual min=-0.003293 max=0.002946 Jy/beam ! Clean residual mean=-0.000004 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.138783 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.138783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157876Jy sigma=0.000638 ! Fit after self-cal, rms=0.157884Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000513901 Jy ! Component: 100 - total flux cleaned = 0.00111087 Jy ! Component: 150 - total flux cleaned = 0.00146409 Jy ! Component: 200 - total flux cleaned = 0.00175572 Jy ! Total flux subtracted in 200 components = 0.00175572 Jy ! Clean residual min=-0.003318 max=0.003012 Jy/beam ! Clean residual mean=-0.000003 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 0.140539 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 98 components and 0.140539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157883Jy sigma=0.000638 ! Fit after self-cal, rms=0.157879Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.776 mas, bmaj=7.052 mas, bpa=-0.9519 degrees ! Estimated noise=1429.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.776 x 7.052 at -0.9519 degrees (North through East) ! Clean map min=-0.0027414 max=0.11771 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.357 mas, bmaj=6.342 mas, bpa=-4.441 degrees ! Estimated noise=1935.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882431 Jy ! Component: 100 - total flux cleaned = 0.113247 Jy ! Component: 150 - total flux cleaned = 0.123659 Jy ! Component: 200 - total flux cleaned = 0.128753 Jy ! Total flux subtracted in 200 components = 0.128753 Jy ! Clean residual min=-0.006336 max=0.005582 Jy/beam ! Clean residual mean=-0.000001 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.128753 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.128753 Jy ! Inverting map and beam ! Estimated beam: bmin=2.776 mas, bmaj=7.052 mas, bpa=-0.9519 degrees ! Estimated noise=1429.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373901 Jy ! Component: 100 - total flux cleaned = 0.00524665 Jy ! Component: 150 - total flux cleaned = 0.00601816 Jy ! Component: 200 - total flux cleaned = 0.00668639 Jy ! Total flux subtracted in 200 components = 0.00668639 Jy ! Clean residual min=-0.003245 max=0.002894 Jy/beam ! Clean residual mean=-0.000002 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.135439 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 29 components and 0.135439 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.472 mas, bmaj=13.49 mas, bpa=5.682 degrees ! Estimated noise=2030.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233042 Jy ! Component: 100 - total flux cleaned = 0.00394445 Jy ! Component: 150 - total flux cleaned = 0.00504911 Jy ! Component: 200 - total flux cleaned = 0.00573251 Jy ! Total flux subtracted in 200 components = 0.00573251 Jy ! Clean residual min=-0.003265 max=0.002879 Jy/beam ! Clean residual mean=-0.000003 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.141172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519134 Jy ! Component: 100 - total flux cleaned = 0.000804106 Jy ! Component: 150 - total flux cleaned = 0.000933425 Jy ! Component: 200 - total flux cleaned = 0.00108172 Jy ! Total flux subtracted in 200 components = 0.00108172 Jy ! Clean residual min=-0.003217 max=0.002960 Jy/beam ! Clean residual mean=-0.000003 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.142254 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 0.142254 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.776 mas, bmaj=7.052 mas, bpa=-0.9519 degrees ! Estimated noise=1429.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155728 Jy ! Component: 100 - total flux cleaned = -3.10463e-05 Jy ! Component: 150 - total flux cleaned = 2.42324e-05 Jy ! Component: 200 - total flux cleaned = -2.63095e-05 Jy ! Total flux subtracted in 200 components = -2.63095e-05 Jy ! Clean residual min=-0.002926 max=0.002657 Jy/beam ! Clean residual mean=0.000000 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.142227 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.142227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157910Jy sigma=0.000638 ! Fit after self-cal, rms=0.157901Jy sigma=0.000638 wmodel J2154-1501_S_2017_01_21_pus_map.mod ! Writing 69 model components to file: J2154-1501_S_2017_01_21_pus_map.mod wobs J2154-1501_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2154-1501_S_2017_01_21_pus_uvs.fits wwins J2154-1501_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J2154-1501_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107039 Jy ! Component: 100 - total flux cleaned = -0.00136873 Jy ! Component: 150 - total flux cleaned = -0.00151103 Jy ! Component: 200 - total flux cleaned = -0.00160141 Jy ! Component: 250 - total flux cleaned = -0.00164488 Jy ! Component: 300 - total flux cleaned = -0.0015585 Jy ! Component: 350 - total flux cleaned = -0.00151632 Jy ! Component: 400 - total flux cleaned = -0.0014338 Jy ! Component: 450 - total flux cleaned = -0.00143344 Jy ! Component: 500 - total flux cleaned = -0.00143252 Jy ! Component: 550 - total flux cleaned = -0.00135408 Jy ! Component: 600 - total flux cleaned = -0.00143099 Jy ! Component: 650 - total flux cleaned = -0.00131742 Jy ! Component: 700 - total flux cleaned = -0.00135484 Jy ! Component: 750 - total flux cleaned = -0.00128141 Jy ! Component: 800 - total flux cleaned = -0.00131724 Jy ! Component: 850 - total flux cleaned = -0.00110223 Jy ! Component: 900 - total flux cleaned = -0.00110181 Jy ! Component: 950 - total flux cleaned = -0.000997398 Jy ! Component: 1000 - total flux cleaned = -0.000859729 Jy ! Component: 1050 - total flux cleaned = -0.000826194 Jy ! Component: 1100 - total flux cleaned = -0.000826386 Jy ! Component: 1150 - total flux cleaned = -0.000759354 Jy ! Component: 1200 - total flux cleaned = -0.00069327 Jy ! Component: 1250 - total flux cleaned = -0.00072549 Jy ! Component: 1300 - total flux cleaned = -0.000596449 Jy ! Component: 1350 - total flux cleaned = -0.000500759 Jy ! Component: 1400 - total flux cleaned = -0.000437728 Jy ! Component: 1450 - total flux cleaned = -0.000469228 Jy ! Component: 1500 - total flux cleaned = -0.00046937 Jy ! Component: 1550 - total flux cleaned = -0.000469223 Jy ! Component: 1600 - total flux cleaned = -0.000378432 Jy ! Component: 1650 - total flux cleaned = -0.000318624 Jy ! Component: 1700 - total flux cleaned = -0.000318628 Jy ! Component: 1750 - total flux cleaned = -0.000259732 Jy ! Component: 1800 - total flux cleaned = -0.000230801 Jy ! Component: 1850 - total flux cleaned = -0.00020227 Jy ! Component: 1900 - total flux cleaned = -0.00017382 Jy ! Component: 1950 - total flux cleaned = -0.000117531 Jy ! Component: 2000 - total flux cleaned = -0.000146087 Jy ! Component: 2050 - total flux cleaned = -0.000201775 Jy ! Component: 2100 - total flux cleaned = -0.000174328 Jy ! Component: 2150 - total flux cleaned = -0.000229281 Jy ! Component: 2200 - total flux cleaned = -0.000283394 Jy ! Component: 2250 - total flux cleaned = -0.000202653 Jy ! Component: 2300 - total flux cleaned = -0.000202601 Jy ! Component: 2350 - total flux cleaned = -0.000176373 Jy ! Component: 2400 - total flux cleaned = -0.000255218 Jy ! Component: 2450 - total flux cleaned = -0.000281204 Jy ! Component: 2500 - total flux cleaned = -0.000281163 Jy ! Component: 2550 - total flux cleaned = -0.000255868 Jy ! Component: 2600 - total flux cleaned = -0.00028146 Jy ! Component: 2650 - total flux cleaned = -0.000230908 Jy ! Component: 2700 - total flux cleaned = -0.000231123 Jy ! Component: 2750 - total flux cleaned = -0.000281008 Jy ! Component: 2800 - total flux cleaned = -0.000305611 Jy ! Component: 2850 - total flux cleaned = -0.000330381 Jy ! Component: 2900 - total flux cleaned = -0.000403399 Jy ! Component: 2950 - total flux cleaned = -0.000330454 Jy ! Component: 3000 - total flux cleaned = -0.000426718 Jy ! Component: 3050 - total flux cleaned = -0.000282878 Jy ! Component: 3100 - total flux cleaned = -0.000306697 Jy ! Component: 3150 - total flux cleaned = -0.000377784 Jy ! Component: 3200 - total flux cleaned = -0.000354183 Jy ! Component: 3250 - total flux cleaned = -0.000377807 Jy ! Component: 3300 - total flux cleaned = -0.000424332 Jy ! Component: 3350 - total flux cleaned = -0.000424465 Jy ! Component: 3400 - total flux cleaned = -0.000355651 Jy ! Component: 3450 - total flux cleaned = -0.000401326 Jy ! Component: 3500 - total flux cleaned = -0.000378749 Jy ! Component: 3550 - total flux cleaned = -0.000356196 Jy ! Component: 3600 - total flux cleaned = -0.000401081 Jy ! Component: 3650 - total flux cleaned = -0.000356242 Jy ! Component: 3700 - total flux cleaned = -0.000333886 Jy ! Component: 3750 - total flux cleaned = -0.000333947 Jy ! Component: 3800 - total flux cleaned = -0.000421779 Jy ! Component: 3850 - total flux cleaned = -0.000290496 Jy ! Component: 3900 - total flux cleaned = -0.000334197 Jy ! Component: 3950 - total flux cleaned = -0.000355977 Jy ! Component: 4000 - total flux cleaned = -0.000377583 Jy ! Component: 4050 - total flux cleaned = -0.000399137 Jy ! Total flux subtracted in 4096 components = -0.000420528 Jy ! Clean residual min=-0.001214 max=0.001234 Jy/beam ! Clean residual mean=-0.000000 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.141807 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 368 components and 0.141807 Jy ![Exited script file: muppet] wmap "J2154-1501_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.776 x 7.052 at -0.9519 degrees (North through East) ! Clean map min=-0.002365 max=0.11641 Jy/beam ! Writing clean map to FITS file: J2154-1501_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116414 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000376192 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.96945 0.96945 1.9389 3.8778 7.7556 15.5112 31.0224 62.0448 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.776 x 7.052 at -0.9519 degrees (North through East) ! Clean map min=-0.002365 max=0.11641 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2154-1501_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:04:19 2019