! Started logfile: J2154+1727_S_2017_01_21_pus_uvs.log on Sun May 5 16:04:19 2019 obs J2154+1727_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J2154+1727_S_2017_01_21_pus_uva.fits ! AN table 1: 143 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.828089 visibilities/baseline/integration-bin. ! Found source: J2154+1727 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 17052 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2154+1727_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 402 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.795146Jy sigma=0.005758 ! Fit after self-cal, rms=0.784505Jy sigma=0.005694 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=5.801 mas, bpa=-8.146 degrees ! Estimated noise=1307.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.179368 Jy ! Component: 100 - total flux cleaned = 0.221409 Jy ! Total flux subtracted in 100 components = 0.221409 Jy ! Clean residual min=-0.011725 max=0.019796 Jy/beam ! Clean residual mean=0.000071 rms=0.003582 Jy/beam ! Combined flux in latest and established models = 0.221409 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.221409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126886Jy sigma=0.000780 ! Fit after self-cal, rms=0.126916Jy sigma=0.000780 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=6.578 mas, bpa=-6.981 degrees ! Estimated noise=809.853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (32, -33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217687 Jy ! Component: 100 - total flux cleaned = 0.0353833 Jy ! Component: 150 - total flux cleaned = 0.0450361 Jy ! Component: 200 - total flux cleaned = 0.0513627 Jy ! Total flux subtracted in 200 components = 0.0513627 Jy ! Clean residual min=-0.010174 max=0.013713 Jy/beam ! Clean residual mean=0.000028 rms=0.002588 Jy/beam ! Combined flux in latest and established models = 0.272771 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.272772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123173Jy sigma=0.000737 ! Fit after self-cal, rms=0.122853Jy sigma=0.000733 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.82 HN 0.97 LA 1.01 ! MK 0.95 NL 0.94 OV 1.09 PT 0.95 ! SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.82 HN 1.00 LA 0.99 ! MK 0.98 NL 1.07 OV 1.15 PT 0.92 ! SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.89 HN 1.03 LA 0.97 ! MK 1.02 NL 1.25 OV 1.03 PT 0.91 ! SC 0.91 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.92 HN 0.99 LA 1.02 ! MK 1.12 NL 1.00* OV 1.07 PT 0.94 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.122853Jy sigma=0.000733 ! Fit after self-cal, rms=0.122944Jy sigma=0.000700 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=6.503 mas, bpa=-5.614 degrees ! Estimated noise=788.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000694255 Jy ! Component: 100 - total flux cleaned = 0.000842881 Jy ! Component: 150 - total flux cleaned = 0.000972266 Jy ! Component: 200 - total flux cleaned = 0.00109486 Jy ! Total flux subtracted in 200 components = 0.00109486 Jy ! Clean residual min=-0.008043 max=0.006844 Jy/beam ! Clean residual mean=0.000018 rms=0.001734 Jy/beam ! Combined flux in latest and established models = 0.273866 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 0.273866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122261Jy sigma=0.000698 ! Fit after self-cal, rms=0.122465Jy sigma=0.000697 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122465Jy sigma=0.000697 ! Fit after self-cal, rms=0.153971Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=6.478 mas, bpa=-5.716 degrees ! Estimated noise=799.156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212718 Jy ! Component: 100 - total flux cleaned = -0.00126209 Jy ! Component: 150 - total flux cleaned = -0.00190882 Jy ! Component: 200 - total flux cleaned = -0.00252805 Jy ! Total flux subtracted in 200 components = -0.00252805 Jy ! Clean residual min=-0.004037 max=0.003749 Jy/beam ! Clean residual mean=-0.000004 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.271338 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.271338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153764Jy sigma=0.000668 ! Fit after self-cal, rms=0.154012Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188523 Jy ! Component: 100 - total flux cleaned = 0.00143172 Jy ! Component: 150 - total flux cleaned = 0.000889627 Jy ! Component: 200 - total flux cleaned = 0.000478393 Jy ! Total flux subtracted in 200 components = 0.000478393 Jy ! Clean residual min=-0.003618 max=0.002604 Jy/beam ! Clean residual mean=-0.000001 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.271817 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 94 components and 0.271817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153864Jy sigma=0.000666 ! Fit after self-cal, rms=0.153878Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153878Jy sigma=0.000666 ! Fit after self-cal, rms=0.156618Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.473 mas, bpa=-5.715 degrees ! Estimated noise=796.916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300781 Jy ! Component: 100 - total flux cleaned = -0.000322017 Jy ! Component: 150 - total flux cleaned = -0.000792899 Jy ! Component: 200 - total flux cleaned = -0.00108899 Jy ! Total flux subtracted in 200 components = -0.00108899 Jy ! Clean residual min=-0.003213 max=0.002292 Jy/beam ! Clean residual mean=-0.000003 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.270728 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 109 components and 0.270728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156501Jy sigma=0.000665 ! Fit after self-cal, rms=0.156535Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317309 Jy ! Component: 100 - total flux cleaned = -0.00065426 Jy ! Component: 150 - total flux cleaned = -0.000806513 Jy ! Component: 200 - total flux cleaned = -0.00103916 Jy ! Total flux subtracted in 200 components = -0.00103916 Jy ! Clean residual min=-0.003128 max=0.002161 Jy/beam ! Clean residual mean=-0.000001 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.269688 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.269688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156479Jy sigma=0.000664 ! Fit after self-cal, rms=0.156492Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156492Jy sigma=0.000664 ! Fit after self-cal, rms=0.158211Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.005 mas, bmaj=9.728 mas, bpa=-0.5349 degrees ! Estimated noise=1021.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022438 Jy ! Component: 100 - total flux cleaned = -0.000501133 Jy ! Component: 150 - total flux cleaned = -0.000826451 Jy ! Component: 200 - total flux cleaned = -0.00109671 Jy ! Total flux subtracted in 200 components = -0.00109671 Jy ! Clean residual min=-0.003299 max=0.002276 Jy/beam ! Clean residual mean=-0.000004 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.268592 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 147 components and 0.268592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158152Jy sigma=0.000664 ! Fit after self-cal, rms=0.158178Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000290421 Jy ! Component: 100 - total flux cleaned = -0.000520297 Jy ! Component: 150 - total flux cleaned = -0.000637628 Jy ! Component: 200 - total flux cleaned = -0.000808429 Jy ! Total flux subtracted in 200 components = -0.000808429 Jy ! Clean residual min=-0.003080 max=0.002179 Jy/beam ! Clean residual mean=-0.000000 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.267783 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 164 components and 0.267783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158152Jy sigma=0.000664 ! Fit after self-cal, rms=0.158160Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.467 mas, bpa=-5.722 degrees ! Estimated noise=795.236 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 6.467 at -5.722 degrees (North through East) ! Clean map min=-0.0027226 max=0.21978 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=5.725 mas, bpa=-6.716 degrees ! Estimated noise=1279.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174967 Jy ! Component: 100 - total flux cleaned = 0.216201 Jy ! Component: 150 - total flux cleaned = 0.235462 Jy ! Component: 200 - total flux cleaned = 0.24635 Jy ! Total flux subtracted in 200 components = 0.24635 Jy ! Clean residual min=-0.005404 max=0.005753 Jy/beam ! Clean residual mean=0.000019 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.24635 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.24635 Jy ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.467 mas, bpa=-5.722 degrees ! Estimated noise=795.236 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792826 Jy ! Component: 100 - total flux cleaned = 0.012686 Jy ! Component: 150 - total flux cleaned = 0.0148769 Jy ! Component: 200 - total flux cleaned = 0.0166284 Jy ! Total flux subtracted in 200 components = 0.0166284 Jy ! Clean residual min=-0.002659 max=0.002450 Jy/beam ! Clean residual mean=0.000006 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.262978 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 50 components and 0.262978 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.005 mas, bmaj=9.728 mas, bpa=-0.5349 degrees ! Estimated noise=1021.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022473 Jy ! Component: 100 - total flux cleaned = 0.00320642 Jy ! Component: 150 - total flux cleaned = 0.00339319 Jy ! Component: 200 - total flux cleaned = 0.00344607 Jy ! Total flux subtracted in 200 components = 0.00344607 Jy ! Clean residual min=-0.003080 max=0.002601 Jy/beam ! Clean residual mean=0.000010 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.266424 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.68099e-05 Jy ! Component: 100 - total flux cleaned = 8.5197e-05 Jy ! Component: 150 - total flux cleaned = 8.6687e-05 Jy ! Component: 200 - total flux cleaned = 0.000119733 Jy ! Total flux subtracted in 200 components = 0.000119733 Jy ! Clean residual min=-0.003063 max=0.002486 Jy/beam ! Clean residual mean=0.000008 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.266544 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 94 components and 0.266544 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=6.467 mas, bpa=-5.722 degrees ! Estimated noise=795.236 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000244418 Jy ! Component: 100 - total flux cleaned = -0.000248862 Jy ! Component: 150 - total flux cleaned = -0.000248404 Jy ! Component: 200 - total flux cleaned = -0.000287471 Jy ! Total flux subtracted in 200 components = -0.000287471 Jy ! Clean residual min=-0.002457 max=0.001943 Jy/beam ! Clean residual mean=0.000003 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.266257 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 108 components and 0.266257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158180Jy sigma=0.000664 ! Fit after self-cal, rms=0.158181Jy sigma=0.000664 wmodel J2154+1727_S_2017_01_21_pus_map.mod ! Writing 108 model components to file: J2154+1727_S_2017_01_21_pus_map.mod wobs J2154+1727_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J2154+1727_S_2017_01_21_pus_uvs.fits wwins J2154+1727_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J2154+1727_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105683 Jy ! Component: 100 - total flux cleaned = -0.00197616 Jy ! Component: 150 - total flux cleaned = -0.0026644 Jy ! Component: 200 - total flux cleaned = -0.00299259 Jy ! Component: 250 - total flux cleaned = -0.00330932 Jy ! Component: 300 - total flux cleaned = -0.00349367 Jy ! Component: 350 - total flux cleaned = -0.00361335 Jy ! Component: 400 - total flux cleaned = -0.00370119 Jy ! Component: 450 - total flux cleaned = -0.00373055 Jy ! Component: 500 - total flux cleaned = -0.00375938 Jy ! Component: 550 - total flux cleaned = -0.00373171 Jy ! Component: 600 - total flux cleaned = -0.00362345 Jy ! Component: 650 - total flux cleaned = -0.0034904 Jy ! Component: 700 - total flux cleaned = -0.00343767 Jy ! Component: 750 - total flux cleaned = -0.00330789 Jy ! Component: 800 - total flux cleaned = -0.00323096 Jy ! Component: 850 - total flux cleaned = -0.00313012 Jy ! Component: 900 - total flux cleaned = -0.00313005 Jy ! Component: 950 - total flux cleaned = -0.00305585 Jy ! Component: 1000 - total flux cleaned = -0.00298344 Jy ! Component: 1050 - total flux cleaned = -0.00295953 Jy ! Component: 1100 - total flux cleaned = -0.00291193 Jy ! Component: 1150 - total flux cleaned = -0.00286547 Jy ! Component: 1200 - total flux cleaned = -0.00281941 Jy ! Component: 1250 - total flux cleaned = -0.00288804 Jy ! Component: 1300 - total flux cleaned = -0.0028651 Jy ! Component: 1350 - total flux cleaned = -0.00286487 Jy ! Component: 1400 - total flux cleaned = -0.00279858 Jy ! Component: 1450 - total flux cleaned = -0.00282043 Jy ! Component: 1500 - total flux cleaned = -0.00282014 Jy ! Component: 1550 - total flux cleaned = -0.00279846 Jy ! Component: 1600 - total flux cleaned = -0.00281971 Jy ! Component: 1650 - total flux cleaned = -0.00279832 Jy ! Component: 1700 - total flux cleaned = -0.00269383 Jy ! Component: 1750 - total flux cleaned = -0.00279758 Jy ! Component: 1800 - total flux cleaned = -0.00271514 Jy ! Component: 1850 - total flux cleaned = -0.00265401 Jy ! Component: 1900 - total flux cleaned = -0.00265412 Jy ! Component: 1950 - total flux cleaned = -0.00263421 Jy ! Component: 2000 - total flux cleaned = -0.00255479 Jy ! Component: 2050 - total flux cleaned = -0.00257432 Jy ! Component: 2100 - total flux cleaned = -0.00255453 Jy ! Component: 2150 - total flux cleaned = -0.00249655 Jy ! Component: 2200 - total flux cleaned = -0.00249679 Jy ! Component: 2250 - total flux cleaned = -0.00255418 Jy ! Component: 2300 - total flux cleaned = -0.00257306 Jy ! Component: 2350 - total flux cleaned = -0.00255397 Jy ! Component: 2400 - total flux cleaned = -0.00257296 Jy ! Component: 2450 - total flux cleaned = -0.00260989 Jy ! Component: 2500 - total flux cleaned = -0.00255497 Jy ! Component: 2550 - total flux cleaned = -0.00262807 Jy ! Component: 2600 - total flux cleaned = -0.00262812 Jy ! Component: 2650 - total flux cleaned = -0.00264595 Jy ! Component: 2700 - total flux cleaned = -0.00268172 Jy ! Component: 2750 - total flux cleaned = -0.00264617 Jy ! Component: 2800 - total flux cleaned = -0.00264627 Jy ! Component: 2850 - total flux cleaned = -0.00262892 Jy ! Component: 2900 - total flux cleaned = -0.00266391 Jy ! Component: 2950 - total flux cleaned = -0.00264672 Jy ! Component: 3000 - total flux cleaned = -0.00262956 Jy ! Component: 3050 - total flux cleaned = -0.00262958 Jy ! Component: 3100 - total flux cleaned = -0.00268043 Jy ! Component: 3150 - total flux cleaned = -0.00261278 Jy ! Component: 3200 - total flux cleaned = -0.00257929 Jy ! Component: 3250 - total flux cleaned = -0.00256261 Jy ! Component: 3300 - total flux cleaned = -0.00257906 Jy ! Component: 3350 - total flux cleaned = -0.00257888 Jy ! Component: 3400 - total flux cleaned = -0.00257876 Jy ! Component: 3450 - total flux cleaned = -0.00259506 Jy ! Component: 3500 - total flux cleaned = -0.00253042 Jy ! Component: 3550 - total flux cleaned = -0.00251428 Jy ! Component: 3600 - total flux cleaned = -0.00248241 Jy ! Component: 3650 - total flux cleaned = -0.00251435 Jy ! Component: 3700 - total flux cleaned = -0.00249863 Jy ! Component: 3750 - total flux cleaned = -0.00251432 Jy ! Component: 3800 - total flux cleaned = -0.00254557 Jy ! Component: 3850 - total flux cleaned = -0.00249891 Jy ! Component: 3900 - total flux cleaned = -0.00243697 Jy ! Component: 3950 - total flux cleaned = -0.00246762 Jy ! Component: 4000 - total flux cleaned = -0.00243685 Jy ! Component: 4050 - total flux cleaned = -0.00237583 Jy ! Total flux subtracted in 4096 components = -0.00239106 Jy ! Clean residual min=-0.000886 max=0.000935 Jy/beam ! Clean residual mean=0.000002 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.263866 Jy keep ! Adding 293 model components to the UV plane model. ! The established model now contains 401 components and 0.263866 Jy ![Exited script file: muppet] wmap "J2154+1727_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 6.467 at -5.722 degrees (North through East) ! Clean map min=-0.0024885 max=0.22063 Jy/beam ! Writing clean map to FITS file: J2154+1727_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.220629 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000284154 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.386377 0.386377 0.772754 1.54551 3.09101 6.18203 12.3641 24.7281 49.4562 98.9125 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.22 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 6.467 at -5.722 degrees (North through East) ! Clean map min=-0.0024885 max=0.22063 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2154+1727_S_2017_01_21_pus_uvs.log closed on Sun May 5 16:04:24 2019