! Started logfile: J2148+6107_S_2017_05_27_pus_uvs.log on Fri May 3 11:15:03 2019 obs J2148+6107_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2148+6107_S_2017_05_27_pus_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.808254 visibilities/baseline/integration-bin. ! Found source: J2148+6107 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 20368 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2148+6107_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 869 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.603765Jy sigma=0.031430 ! Fit after self-cal, rms=0.584240Jy sigma=0.031399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.262 mas, bmaj=4.121 mas, bpa=-10.73 degrees ! Estimated noise=680.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28073 Jy ! Component: 100 - total flux cleaned = 0.409114 Jy ! Total flux subtracted in 100 components = 0.409114 Jy ! Clean residual min=-0.059513 max=0.084368 Jy/beam ! Clean residual mean=-0.000074 rms=0.021226 Jy/beam ! Combined flux in latest and established models = 0.409114 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.409114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393666Jy sigma=0.010633 ! Fit after self-cal, rms=0.393481Jy sigma=0.010633 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=5.006 mas, bpa=-16.5 degrees ! Estimated noise=438.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107919 Jy ! Component: 100 - total flux cleaned = 0.162438 Jy ! Component: 150 - total flux cleaned = 0.191789 Jy ! Component: 200 - total flux cleaned = 0.207944 Jy ! Total flux subtracted in 200 components = 0.207944 Jy ! Clean residual min=-0.090281 max=0.122521 Jy/beam ! Clean residual mean=0.000212 rms=0.032985 Jy/beam ! Combined flux in latest and established models = 0.617058 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 50 components and 0.617058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288519Jy sigma=0.014769 ! Fit after self-cal, rms=0.288254Jy sigma=0.014768 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.76 HN 0.92 KP 0.79 ! LA 0.73 MK 1.42 NL 0.75 OV 0.82 ! PT 0.80 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.78 HN 0.95 KP 0.77 ! LA 0.70 MK 1.40 NL 0.86 OV 20.62 ! PT 0.78 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.81 HN 0.96 KP 0.78 ! LA 0.76 MK 1.43 NL 0.83 OV 0.77 ! PT 0.77 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.04 KP 1.00* ! LA 0.78 MK 1.59 NL 1.00* OV 1.00* ! PT 0.77 SC 1.00* ! ! ! Fit before self-cal, rms=0.288254Jy sigma=0.014768 ! Fit after self-cal, rms=2.610937Jy sigma=0.002036 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.127 mas, bmaj=5.493 mas, bpa=0.1072 degrees ! Estimated noise=495.018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480507 Jy ! Component: 100 - total flux cleaned = 0.0552953 Jy ! Component: 150 - total flux cleaned = 0.0539147 Jy ! Component: 200 - total flux cleaned = 0.0533416 Jy ! Total flux subtracted in 200 components = 0.0533416 Jy ! Clean residual min=-0.023556 max=0.020467 Jy/beam ! Clean residual mean=0.000060 rms=0.005471 Jy/beam ! Combined flux in latest and established models = 0.670399 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 75 components and 0.6704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.603248Jy sigma=0.001967 ! Fit after self-cal, rms=2.603451Jy sigma=0.001954 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.603451Jy sigma=0.001954 ! Fit after self-cal, rms=1.566854Jy sigma=0.001317 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=5.032 mas, bpa=-12.37 degrees ! Estimated noise=467.746 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168186 Jy ! Component: 100 - total flux cleaned = 0.0250312 Jy ! Component: 150 - total flux cleaned = 0.0278167 Jy ! Component: 200 - total flux cleaned = 0.0296216 Jy ! Total flux subtracted in 200 components = 0.0296216 Jy ! Clean residual min=-0.013208 max=0.016373 Jy/beam ! Clean residual mean=0.000022 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 0.700021 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 93 components and 0.700021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.565312Jy sigma=0.001294 ! Fit after self-cal, rms=1.565340Jy sigma=0.001290 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-29.5, -17.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175651 Jy ! Component: 100 - total flux cleaned = 0.0281489 Jy ! Component: 150 - total flux cleaned = 0.0359429 Jy ! Component: 200 - total flux cleaned = 0.0412515 Jy ! Total flux subtracted in 200 components = 0.0412515 Jy ! Clean residual min=-0.011956 max=0.012723 Jy/beam ! Clean residual mean=0.000018 rms=0.003158 Jy/beam ! Combined flux in latest and established models = 0.741273 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 139 components and 0.741273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.565432Jy sigma=0.001242 ! Fit after self-cal, rms=1.565351Jy sigma=0.001239 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.565351Jy sigma=0.001239 ! Fit after self-cal, rms=0.079495Jy sigma=0.000896 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.801 mas, bmaj=5.03 mas, bpa=-10.85 degrees ! Estimated noise=461.815 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111378 Jy ! Component: 100 - total flux cleaned = 0.0169361 Jy ! Component: 150 - total flux cleaned = 0.0215087 Jy ! Component: 200 - total flux cleaned = 0.0252513 Jy ! Total flux subtracted in 200 components = 0.0252513 Jy ! Clean residual min=-0.007281 max=0.011914 Jy/beam ! Clean residual mean=-0.000024 rms=0.002153 Jy/beam ! Combined flux in latest and established models = 0.766524 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.766524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077321Jy sigma=0.000864 ! Fit after self-cal, rms=0.077071Jy sigma=0.000861 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114854 Jy ! Component: 100 - total flux cleaned = 0.0183226 Jy ! Component: 150 - total flux cleaned = 0.0223699 Jy ! Component: 200 - total flux cleaned = 0.0261853 Jy ! Total flux subtracted in 200 components = 0.0261853 Jy ! Clean residual min=-0.006401 max=0.010632 Jy/beam ! Clean residual mean=-0.000012 rms=0.001937 Jy/beam ! Combined flux in latest and established models = 0.792709 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 185 components and 0.792709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075111Jy sigma=0.000831 ! Fit after self-cal, rms=0.074966Jy sigma=0.000829 ! Inverting map ! Added new window around map position (-42.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108589 Jy ! Component: 100 - total flux cleaned = 0.0176126 Jy ! Component: 150 - total flux cleaned = 0.0230137 Jy ! Component: 200 - total flux cleaned = 0.0274144 Jy ! Total flux subtracted in 200 components = 0.0274144 Jy ! Clean residual min=-0.006223 max=0.007807 Jy/beam ! Clean residual mean=-0.000023 rms=0.001672 Jy/beam ! Combined flux in latest and established models = 0.820124 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 214 components and 0.820123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073126Jy sigma=0.000800 ! Fit after self-cal, rms=0.072946Jy sigma=0.000799 ! Inverting map ! Added new window around map position (-17, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00768071 Jy ! Component: 100 - total flux cleaned = 0.0115914 Jy ! Component: 150 - total flux cleaned = 0.0146853 Jy ! Component: 200 - total flux cleaned = 0.0172142 Jy ! Total flux subtracted in 200 components = 0.0172142 Jy ! Clean residual min=-0.005903 max=0.006654 Jy/beam ! Clean residual mean=-0.000023 rms=0.001544 Jy/beam ! Combined flux in latest and established models = 0.837338 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 236 components and 0.837338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071817Jy sigma=0.000783 ! Fit after self-cal, rms=0.071730Jy sigma=0.000782 ! Inverting map ! Added new window around map position (-17.5, -25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610855 Jy ! Component: 100 - total flux cleaned = 0.0095077 Jy ! Component: 150 - total flux cleaned = 0.0115267 Jy ! Component: 200 - total flux cleaned = 0.0133898 Jy ! Total flux subtracted in 200 components = 0.0133898 Jy ! Clean residual min=-0.005041 max=0.006055 Jy/beam ! Clean residual mean=-0.000022 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.850727 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 255 components and 0.850727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070917Jy sigma=0.000773 ! Fit after self-cal, rms=0.070873Jy sigma=0.000772 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070873Jy sigma=0.000772 ! Fit after self-cal, rms=0.068690Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.398 mas, bmaj=8.99 mas, bpa=-5.441 degrees ! Estimated noise=550.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089815 Jy ! Component: 100 - total flux cleaned = 0.015169 Jy ! Component: 150 - total flux cleaned = 0.0202339 Jy ! Component: 200 - total flux cleaned = 0.0245285 Jy ! Total flux subtracted in 200 components = 0.0245285 Jy ! Clean residual min=-0.006027 max=0.006678 Jy/beam ! Clean residual mean=-0.000041 rms=0.001678 Jy/beam ! Combined flux in latest and established models = 0.875256 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 297 components and 0.875256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068174Jy sigma=0.000749 ! Fit after self-cal, rms=0.068030Jy sigma=0.000747 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482247 Jy ! Component: 100 - total flux cleaned = 0.00863092 Jy ! Component: 150 - total flux cleaned = 0.0114998 Jy ! Component: 200 - total flux cleaned = 0.01323 Jy ! Total flux subtracted in 200 components = 0.01323 Jy ! Clean residual min=-0.005426 max=0.006149 Jy/beam ! Clean residual mean=-0.000036 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.888486 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 317 components and 0.888486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067882Jy sigma=0.000744 ! Fit after self-cal, rms=0.067838Jy sigma=0.000743 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=5.012 mas, bpa=-9.02 degrees ! Estimated noise=460.117 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 5.012 at -9.02 degrees (North through East) ! Clean map min=-0.0054946 max=0.37053 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=4.2 mas, bpa=-9.175 degrees ! Estimated noise=703.936 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.297891 Jy ! Component: 100 - total flux cleaned = 0.438378 Jy ! Component: 150 - total flux cleaned = 0.519644 Jy ! Component: 200 - total flux cleaned = 0.572832 Jy ! Total flux subtracted in 200 components = 0.572832 Jy ! Clean residual min=-0.012647 max=0.029938 Jy/beam ! Clean residual mean=-0.000063 rms=0.003706 Jy/beam ! Combined flux in latest and established models = 0.572831 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 59 model components to the UV plane model. ! The established model now contains 59 components and 0.572831 Jy ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=5.012 mas, bpa=-9.02 degrees ! Estimated noise=460.117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562603 Jy ! Component: 100 - total flux cleaned = 0.0907436 Jy ! Component: 150 - total flux cleaned = 0.115313 Jy ! Component: 200 - total flux cleaned = 0.135265 Jy ! Total flux subtracted in 200 components = 0.135265 Jy ! Clean residual min=-0.010020 max=0.014096 Jy/beam ! Clean residual mean=-0.000031 rms=0.002951 Jy/beam ! Combined flux in latest and established models = 0.708097 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 134 components and 0.708097 Jy ! Inverting map ! Added new window around map position (4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174811 Jy ! Component: 100 - total flux cleaned = 0.0327402 Jy ! Component: 150 - total flux cleaned = 0.0463483 Jy ! Component: 200 - total flux cleaned = 0.0585547 Jy ! Total flux subtracted in 200 components = 0.0585547 Jy ! Clean residual min=-0.007694 max=0.008824 Jy/beam ! Clean residual mean=-0.000025 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 0.766651 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 196 components and 0.766651 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.398 mas, bmaj=8.99 mas, bpa=-5.441 degrees ! Estimated noise=550.248 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201911 Jy ! Component: 100 - total flux cleaned = 0.0363802 Jy ! Component: 150 - total flux cleaned = 0.0499104 Jy ! Component: 200 - total flux cleaned = 0.0614796 Jy ! Total flux subtracted in 200 components = 0.0614796 Jy ! Clean residual min=-0.008390 max=0.008481 Jy/beam ! Clean residual mean=-0.000047 rms=0.002527 Jy/beam ! Combined flux in latest and established models = 0.828131 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00997821 Jy ! Component: 100 - total flux cleaned = 0.0186526 Jy ! Component: 150 - total flux cleaned = 0.0262348 Jy ! Component: 200 - total flux cleaned = 0.0328786 Jy ! Total flux subtracted in 200 components = 0.0328786 Jy ! Clean residual min=-0.006974 max=0.006607 Jy/beam ! Clean residual mean=-0.000039 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.86101 Jy ! Adding 190 model components to the UV plane model. ! The established model now contains 356 components and 0.86101 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.8 mas, bmaj=5.012 mas, bpa=-9.02 degrees ! Estimated noise=460.117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00351401 Jy ! Component: 100 - total flux cleaned = 0.00550164 Jy ! Component: 150 - total flux cleaned = 0.00766744 Jy ! Component: 200 - total flux cleaned = 0.00950489 Jy ! Total flux subtracted in 200 components = 0.00950489 Jy ! Clean residual min=-0.005048 max=0.005004 Jy/beam ! Clean residual mean=-0.000017 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.870515 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 390 components and 0.870515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067756Jy sigma=0.000749 ! Fit after self-cal, rms=0.067601Jy sigma=0.000747 wmodel J2148+6107_S_2017_05_27_pus_map.mod ! Writing 390 model components to file: J2148+6107_S_2017_05_27_pus_map.mod wobs J2148+6107_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2148+6107_S_2017_05_27_pus_uvs.fits wwins J2148+6107_S_2017_05_27_pus_map.win ! wwins: Wrote 8 windows to J2148+6107_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000178343 Jy ! Component: 100 - total flux cleaned = 0.000853526 Jy ! Component: 150 - total flux cleaned = 0.00173624 Jy ! Component: 200 - total flux cleaned = 0.00258605 Jy ! Component: 250 - total flux cleaned = 0.00348524 Jy ! Component: 300 - total flux cleaned = 0.00443535 Jy ! Component: 350 - total flux cleaned = 0.00543497 Jy ! Component: 400 - total flux cleaned = 0.0064129 Jy ! Component: 450 - total flux cleaned = 0.00737078 Jy ! Component: 500 - total flux cleaned = 0.00810889 Jy ! Component: 550 - total flux cleaned = 0.00889995 Jy ! Component: 600 - total flux cleaned = 0.00967499 Jy ! Component: 650 - total flux cleaned = 0.0103722 Jy ! Component: 700 - total flux cleaned = 0.010933 Jy ! Component: 750 - total flux cleaned = 0.0116075 Jy ! Component: 800 - total flux cleaned = 0.0122715 Jy ! Component: 850 - total flux cleaned = 0.0129243 Jy ! Component: 900 - total flux cleaned = 0.0134508 Jy ! Component: 950 - total flux cleaned = 0.0139708 Jy ! Component: 1000 - total flux cleaned = 0.0147096 Jy ! Component: 1050 - total flux cleaned = 0.0151015 Jy ! Component: 1100 - total flux cleaned = 0.015544 Jy ! Component: 1150 - total flux cleaned = 0.0160889 Jy ! Component: 1200 - total flux cleaned = 0.0166259 Jy ! Component: 1250 - total flux cleaned = 0.0169967 Jy ! Component: 1300 - total flux cleaned = 0.0172578 Jy ! Component: 1350 - total flux cleaned = 0.0178774 Jy ! Component: 1400 - total flux cleaned = 0.0182329 Jy ! Component: 1450 - total flux cleaned = 0.0184333 Jy ! Component: 1500 - total flux cleaned = 0.0185329 Jy ! Component: 1550 - total flux cleaned = 0.0188784 Jy ! Component: 1600 - total flux cleaned = 0.0190736 Jy ! Component: 1650 - total flux cleaned = 0.0193145 Jy ! Component: 1700 - total flux cleaned = 0.0196004 Jy ! Component: 1750 - total flux cleaned = 0.0197881 Jy ! Component: 1800 - total flux cleaned = 0.0199746 Jy ! Component: 1850 - total flux cleaned = 0.0204828 Jy ! Component: 1900 - total flux cleaned = 0.0205275 Jy ! Component: 1950 - total flux cleaned = 0.0208897 Jy ! Component: 2000 - total flux cleaned = 0.0211139 Jy ! Component: 2050 - total flux cleaned = 0.0212911 Jy ! Component: 2100 - total flux cleaned = 0.021555 Jy ! Component: 2150 - total flux cleaned = 0.0219032 Jy ! Component: 2200 - total flux cleaned = 0.0221612 Jy ! Component: 2250 - total flux cleaned = 0.022289 Jy ! Component: 2300 - total flux cleaned = 0.0227118 Jy ! Component: 2350 - total flux cleaned = 0.0226689 Jy ! Component: 2400 - total flux cleaned = 0.0229184 Jy ! Component: 2450 - total flux cleaned = 0.0232485 Jy ! Component: 2500 - total flux cleaned = 0.0234122 Jy ! Component: 2550 - total flux cleaned = 0.0238173 Jy ! Component: 2600 - total flux cleaned = 0.0240575 Jy ! Component: 2650 - total flux cleaned = 0.0242555 Jy ! Component: 2700 - total flux cleaned = 0.0244531 Jy ! Component: 2750 - total flux cleaned = 0.0246489 Jy ! Component: 2800 - total flux cleaned = 0.0249592 Jy ! Component: 2850 - total flux cleaned = 0.0250742 Jy ! Component: 2900 - total flux cleaned = 0.0251504 Jy ! Component: 2950 - total flux cleaned = 0.0254153 Jy ! Component: 3000 - total flux cleaned = 0.025603 Jy ! Component: 3050 - total flux cleaned = 0.0259008 Jy ! Component: 3100 - total flux cleaned = 0.0260485 Jy ! Component: 3150 - total flux cleaned = 0.0262318 Jy ! Component: 3200 - total flux cleaned = 0.0264499 Jy ! Component: 3250 - total flux cleaned = 0.0267387 Jy ! Component: 3300 - total flux cleaned = 0.0269535 Jy ! Component: 3350 - total flux cleaned = 0.0271309 Jy ! Component: 3400 - total flux cleaned = 0.0273425 Jy ! Component: 3450 - total flux cleaned = 0.0275177 Jy ! Component: 3500 - total flux cleaned = 0.0276563 Jy ! Component: 3550 - total flux cleaned = 0.0277936 Jy ! Component: 3600 - total flux cleaned = 0.0278278 Jy ! Component: 3650 - total flux cleaned = 0.0279979 Jy ! Component: 3700 - total flux cleaned = 0.0282341 Jy ! Component: 3750 - total flux cleaned = 0.028368 Jy ! Component: 3800 - total flux cleaned = 0.0285345 Jy ! Component: 3850 - total flux cleaned = 0.0286664 Jy ! Component: 3900 - total flux cleaned = 0.0288303 Jy ! Component: 3950 - total flux cleaned = 0.028993 Jy ! Component: 4000 - total flux cleaned = 0.0289285 Jy ! Component: 4050 - total flux cleaned = 0.0292172 Jy ! Total flux subtracted in 4096 components = 0.0294404 Jy ! Clean residual min=-0.001589 max=0.002209 Jy/beam ! Clean residual mean=-0.000020 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.899955 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 720 components and 0.899955 Jy ![Exited script file: muppet] wmap "J2148+6107_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 5.012 at -9.02 degrees (North through East) ! Clean map min=-0.0039478 max=0.37611 Jy/beam ! Writing clean map to FITS file: J2148+6107_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.37611 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000624172 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.497864 0.497864 0.995729 1.99146 3.98292 7.96583 15.9317 31.8633 63.7267 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.376 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.8 x 5.012 at -9.02 degrees (North through East) ! Clean map min=-0.0039478 max=0.37611 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2148+6107_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:15:09 2019