! Started logfile: J2147-3601_S_2017_03_23_pus_uvs.log on Mon May 13 10:09:20 2019 obs J2147-3601_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2147-3601_S_2017_03_23_pus_uva.fits ! AN table 1: 53 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.748847 visibilities/baseline/integration-bin. ! Found source: J2147-3601 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 7144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2147-3601_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 284 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.846766Jy sigma=0.005135 ! Fit after self-cal, rms=0.822929Jy sigma=0.005000 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=8.011 mas, bpa=2.166 degrees ! Estimated noise=3783.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134252 Jy ! Component: 100 - total flux cleaned = 0.169909 Jy ! Total flux subtracted in 100 components = 0.169909 Jy ! Clean residual min=-0.013860 max=0.019980 Jy/beam ! Clean residual mean=-0.000193 rms=0.003751 Jy/beam ! Combined flux in latest and established models = 0.169909 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.169909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130468Jy sigma=0.000706 ! Fit after self-cal, rms=0.130418Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=8.288 mas, bpa=3.599 degrees ! Estimated noise=1621.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242525 Jy ! Component: 100 - total flux cleaned = 0.0357129 Jy ! Component: 150 - total flux cleaned = 0.0417557 Jy ! Component: 200 - total flux cleaned = 0.0449905 Jy ! Total flux subtracted in 200 components = 0.0449905 Jy ! Clean residual min=-0.007678 max=0.007987 Jy/beam ! Clean residual mean=-0.000194 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.214899 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 39 components and 0.214899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126073Jy sigma=0.000679 ! Fit after self-cal, rms=0.126091Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.88 HN 1.24 KP 1.03 ! LA 0.97 MK 0.98 NL 1.00* OV 1.03 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.05 HN 1.64 KP 0.97 ! LA 0.96 MK 1.02 NL 1.12 OV 1.03 ! PT 0.92 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 1.33 KP 0.87 ! LA 0.72 MK 1.02 NL 1.36 OV 0.95 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.09 HN 1.20 KP 1.00* ! LA 1.00* MK 1.07 NL 1.00* OV 1.55 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.126091Jy sigma=0.000679 ! Fit after self-cal, rms=0.128333Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.35 mas, bpa=3.711 degrees ! Estimated noise=1634.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.88248e-05 Jy ! Component: 100 - total flux cleaned = -1.25142e-05 Jy ! Component: 150 - total flux cleaned = -6.01045e-05 Jy ! Component: 200 - total flux cleaned = -8.25974e-05 Jy ! Total flux subtracted in 200 components = -8.25974e-05 Jy ! Clean residual min=-0.004591 max=0.004767 Jy/beam ! Clean residual mean=-0.000032 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.214816 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.214816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128324Jy sigma=0.000654 ! Fit after self-cal, rms=0.128608Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128608Jy sigma=0.000653 ! Fit after self-cal, rms=0.129302Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.352 mas, bpa=3.699 degrees ! Estimated noise=1633.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133981 Jy ! Component: 100 - total flux cleaned = -0.000155229 Jy ! Component: 150 - total flux cleaned = -0.000174638 Jy ! Component: 200 - total flux cleaned = -0.000191901 Jy ! Total flux subtracted in 200 components = -0.000191901 Jy ! Clean residual min=-0.004459 max=0.004626 Jy/beam ! Clean residual mean=-0.000028 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.214625 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.214625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129293Jy sigma=0.000652 ! Fit after self-cal, rms=0.129328Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.5, 59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279596 Jy ! Component: 100 - total flux cleaned = 0.0028762 Jy ! Component: 150 - total flux cleaned = 0.00293728 Jy ! Component: 200 - total flux cleaned = 0.00293972 Jy ! Total flux subtracted in 200 components = 0.00293972 Jy ! Clean residual min=-0.004197 max=0.003624 Jy/beam ! Clean residual mean=-0.000033 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.217564 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.217564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129177Jy sigma=0.000651 ! Fit after self-cal, rms=0.129179Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129179Jy sigma=0.000651 ! Fit after self-cal, rms=0.129094Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.359 mas, bpa=3.545 degrees ! Estimated noise=1630.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000935006 Jy ! Component: 100 - total flux cleaned = 0.000931109 Jy ! Component: 150 - total flux cleaned = 0.00100934 Jy ! Component: 200 - total flux cleaned = 0.00100965 Jy ! Total flux subtracted in 200 components = 0.00100965 Jy ! Clean residual min=-0.004231 max=0.003426 Jy/beam ! Clean residual mean=-0.000037 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.218574 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.218574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129050Jy sigma=0.000651 ! Fit after self-cal, rms=0.129060Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294505 Jy ! Component: 100 - total flux cleaned = 0.000295147 Jy ! Component: 150 - total flux cleaned = 0.000296336 Jy ! Component: 200 - total flux cleaned = 0.000356618 Jy ! Total flux subtracted in 200 components = 0.000356618 Jy ! Clean residual min=-0.004251 max=0.003363 Jy/beam ! Clean residual mean=-0.000039 rms=0.000881 Jy/beam ! Combined flux in latest and established models = 0.218931 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.218931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129039Jy sigma=0.000651 ! Fit after self-cal, rms=0.129037Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129037Jy sigma=0.000651 ! Fit after self-cal, rms=0.129020Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.956 mas, bmaj=26.5 mas, bpa=8.339 degrees ! Estimated noise=2038.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793794 Jy ! Component: 100 - total flux cleaned = 0.00100443 Jy ! Component: 150 - total flux cleaned = 0.000986155 Jy ! Component: 200 - total flux cleaned = 0.000968558 Jy ! Total flux subtracted in 200 components = 0.000968558 Jy ! Clean residual min=-0.003102 max=0.003077 Jy/beam ! Clean residual mean=-0.000071 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.219899 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and 0.219899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129018Jy sigma=0.000650 ! Fit after self-cal, rms=0.129018Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113498 Jy ! Component: 100 - total flux cleaned = 0.000132348 Jy ! Component: 150 - total flux cleaned = 0.000115625 Jy ! Component: 200 - total flux cleaned = 9.98702e-05 Jy ! Total flux subtracted in 200 components = 9.98702e-05 Jy ! Clean residual min=-0.003080 max=0.003034 Jy/beam ! Clean residual mean=-0.000070 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.219999 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 98 components and 0.219999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129022Jy sigma=0.000651 ! Fit after self-cal, rms=0.129016Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.362 mas, bpa=3.489 degrees ! Estimated noise=1630.53 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 8.362 at 3.489 degrees (North through East) ! Clean map min=-0.0038887 max=0.17484 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=8.059 mas, bpa=2.564 degrees ! Estimated noise=3898.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13779 Jy ! Component: 100 - total flux cleaned = 0.173409 Jy ! Component: 150 - total flux cleaned = 0.187141 Jy ! Component: 200 - total flux cleaned = 0.193834 Jy ! Total flux subtracted in 200 components = 0.193834 Jy ! Clean residual min=-0.010606 max=0.010169 Jy/beam ! Clean residual mean=-0.000077 rms=0.002584 Jy/beam ! Combined flux in latest and established models = 0.193834 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.193834 Jy ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.362 mas, bpa=3.489 degrees ! Estimated noise=1630.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112389 Jy ! Component: 100 - total flux cleaned = 0.016432 Jy ! Component: 150 - total flux cleaned = 0.0196803 Jy ! Component: 200 - total flux cleaned = 0.022106 Jy ! Total flux subtracted in 200 components = 0.022106 Jy ! Clean residual min=-0.003891 max=0.003202 Jy/beam ! Clean residual mean=-0.000041 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.21594 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 71 components and 0.21594 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.956 mas, bmaj=26.5 mas, bpa=8.339 degrees ! Estimated noise=2038.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024884 Jy ! Component: 100 - total flux cleaned = 0.00406206 Jy ! Component: 150 - total flux cleaned = 0.00515269 Jy ! Component: 200 - total flux cleaned = 0.00558193 Jy ! Total flux subtracted in 200 components = 0.00558193 Jy ! Clean residual min=-0.002799 max=0.002208 Jy/beam ! Clean residual mean=-0.000053 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.221522 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112105 Jy ! Component: 100 - total flux cleaned = 0.00025926 Jy ! Component: 150 - total flux cleaned = 0.000346548 Jy ! Component: 200 - total flux cleaned = 0.000443613 Jy ! Total flux subtracted in 200 components = 0.000443613 Jy ! Clean residual min=-0.002720 max=0.002174 Jy/beam ! Clean residual mean=-0.000053 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.221965 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 97 components and 0.221965 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.362 mas, bpa=3.489 degrees ! Estimated noise=1630.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000757462 Jy ! Component: 100 - total flux cleaned = -0.000674329 Jy ! Component: 150 - total flux cleaned = -0.000674458 Jy ! Component: 200 - total flux cleaned = -0.000641902 Jy ! Total flux subtracted in 200 components = -0.000641902 Jy ! Clean residual min=-0.004113 max=0.003047 Jy/beam ! Clean residual mean=-0.000030 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.221323 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 113 components and 0.221323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128912Jy sigma=0.000650 ! Fit after self-cal, rms=0.128863Jy sigma=0.000650 wmodel J2147-3601_S_2017_03_23_pus_map.mod ! Writing 113 model components to file: J2147-3601_S_2017_03_23_pus_map.mod wobs J2147-3601_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2147-3601_S_2017_03_23_pus_uvs.fits wwins J2147-3601_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J2147-3601_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00156196 Jy ! Component: 100 - total flux cleaned = -0.00234839 Jy ! Component: 150 - total flux cleaned = -0.00313053 Jy ! Component: 200 - total flux cleaned = -0.00357211 Jy ! Component: 250 - total flux cleaned = -0.00371009 Jy ! Component: 300 - total flux cleaned = -0.00388574 Jy ! Component: 350 - total flux cleaned = -0.00413885 Jy ! Component: 400 - total flux cleaned = -0.0042204 Jy ! Component: 450 - total flux cleaned = -0.00437866 Jy ! Component: 500 - total flux cleaned = -0.00441556 Jy ! Component: 550 - total flux cleaned = -0.00445192 Jy ! Component: 600 - total flux cleaned = -0.00448863 Jy ! Component: 650 - total flux cleaned = -0.00441662 Jy ! Component: 700 - total flux cleaned = -0.00434666 Jy ! Component: 750 - total flux cleaned = -0.00434695 Jy ! Component: 800 - total flux cleaned = -0.00424607 Jy ! Component: 850 - total flux cleaned = -0.00418057 Jy ! Component: 900 - total flux cleaned = -0.00411642 Jy ! Component: 950 - total flux cleaned = -0.00399079 Jy ! Component: 1000 - total flux cleaned = -0.00392922 Jy ! Component: 1050 - total flux cleaned = -0.00377622 Jy ! Component: 1100 - total flux cleaned = -0.0035967 Jy ! Component: 1150 - total flux cleaned = -0.00356764 Jy ! Component: 1200 - total flux cleaned = -0.00345303 Jy ! Component: 1250 - total flux cleaned = -0.00339705 Jy ! Component: 1300 - total flux cleaned = -0.0034247 Jy ! Component: 1350 - total flux cleaned = -0.00336946 Jy ! Component: 1400 - total flux cleaned = -0.0033427 Jy ! Component: 1450 - total flux cleaned = -0.00342261 Jy ! Component: 1500 - total flux cleaned = -0.00342262 Jy ! Component: 1550 - total flux cleaned = -0.00342264 Jy ! Component: 1600 - total flux cleaned = -0.00352487 Jy ! Component: 1650 - total flux cleaned = -0.00354975 Jy ! Component: 1700 - total flux cleaned = -0.00357475 Jy ! Component: 1750 - total flux cleaned = -0.0036981 Jy ! Component: 1800 - total flux cleaned = -0.00367356 Jy ! Component: 1850 - total flux cleaned = -0.00374608 Jy ! Component: 1900 - total flux cleaned = -0.00381793 Jy ! Component: 1950 - total flux cleaned = -0.00388888 Jy ! Component: 2000 - total flux cleaned = -0.00402929 Jy ! Component: 2050 - total flux cleaned = -0.00409849 Jy ! Component: 2100 - total flux cleaned = -0.00423658 Jy ! Component: 2150 - total flux cleaned = -0.00430484 Jy ! Component: 2200 - total flux cleaned = -0.00444045 Jy ! Component: 2250 - total flux cleaned = -0.0044627 Jy ! Component: 2300 - total flux cleaned = -0.00448506 Jy ! Component: 2350 - total flux cleaned = -0.00457352 Jy ! Component: 2400 - total flux cleaned = -0.00463922 Jy ! Component: 2450 - total flux cleaned = -0.00472625 Jy ! Component: 2500 - total flux cleaned = -0.00476947 Jy ! Component: 2550 - total flux cleaned = -0.00479095 Jy ! Component: 2600 - total flux cleaned = -0.0048338 Jy ! Component: 2650 - total flux cleaned = -0.00487646 Jy ! Component: 2700 - total flux cleaned = -0.00489775 Jy ! Component: 2750 - total flux cleaned = -0.00493995 Jy ! Component: 2800 - total flux cleaned = -0.00498196 Jy ! Component: 2850 - total flux cleaned = -0.00500283 Jy ! Component: 2900 - total flux cleaned = -0.00504435 Jy ! Component: 2950 - total flux cleaned = -0.00506511 Jy ! Component: 3000 - total flux cleaned = -0.00508587 Jy ! Component: 3050 - total flux cleaned = -0.00502376 Jy ! Component: 3100 - total flux cleaned = -0.00510621 Jy ! Component: 3150 - total flux cleaned = -0.00512683 Jy ! Component: 3200 - total flux cleaned = -0.00514728 Jy ! Component: 3250 - total flux cleaned = -0.00518819 Jy ! Component: 3300 - total flux cleaned = -0.00522904 Jy ! Component: 3350 - total flux cleaned = -0.00520849 Jy ! Component: 3400 - total flux cleaned = -0.00524922 Jy ! Component: 3450 - total flux cleaned = -0.00528981 Jy ! Component: 3500 - total flux cleaned = -0.00533044 Jy ! Component: 3550 - total flux cleaned = -0.00531025 Jy ! Component: 3600 - total flux cleaned = -0.00541161 Jy ! Component: 3650 - total flux cleaned = -0.00545223 Jy ! Component: 3700 - total flux cleaned = -0.00551299 Jy ! Component: 3750 - total flux cleaned = -0.0055131 Jy ! Component: 3800 - total flux cleaned = -0.00549274 Jy ! Component: 3850 - total flux cleaned = -0.00547246 Jy ! Component: 3900 - total flux cleaned = -0.00549292 Jy ! Component: 3950 - total flux cleaned = -0.00545184 Jy ! Component: 4000 - total flux cleaned = -0.00547238 Jy ! Component: 4050 - total flux cleaned = -0.00549288 Jy ! Total flux subtracted in 4096 components = -0.00549287 Jy ! Clean residual min=-0.001138 max=0.001137 Jy/beam ! Clean residual mean=-0.000011 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.215831 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 351 components and 0.21583 Jy ![Exited script file: muppet] wmap "J2147-3601_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 8.362 at 3.489 degrees (North through East) ! Clean map min=-0.0030966 max=0.17936 Jy/beam ! Writing clean map to FITS file: J2147-3601_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.179364 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349053 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.583818 0.583818 1.16764 2.33527 4.67054 9.34109 18.6822 37.3643 74.7287 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.179 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.088 x 8.362 at 3.489 degrees (North through East) ! Clean map min=-0.0030966 max=0.17936 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2147-3601_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:09:24 2019