! Started logfile: J2146-2326_S_2017_06_10_pus_uvs.log on Mon May 6 15:02:47 2019 obs J2146-2326_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J2146-2326_S_2017_06_10_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.971852 visibilities/baseline/integration-bin. ! Found source: J2146-2326 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 13120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2146-2326_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 500 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.981101Jy sigma=0.007623 ! Fit after self-cal, rms=0.942612Jy sigma=0.007355 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=7.018 mas, bpa=-5.329 degrees ! Estimated noise=1450.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466317 Jy ! Component: 100 - total flux cleaned = 0.0582443 Jy ! Total flux subtracted in 100 components = 0.0582443 Jy ! Clean residual min=-0.004853 max=0.005155 Jy/beam ! Clean residual mean=-0.000014 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.0582443 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0582443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093142Jy sigma=0.000677 ! Fit after self-cal, rms=0.092758Jy sigma=0.000675 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.874 mas, bpa=-5.506 degrees ! Estimated noise=994.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705204 Jy ! Component: 100 - total flux cleaned = 0.0105101 Jy ! Component: 150 - total flux cleaned = 0.012262 Jy ! Component: 200 - total flux cleaned = 0.0131658 Jy ! Total flux subtracted in 200 components = 0.0131658 Jy ! Clean residual min=-0.003247 max=0.003233 Jy/beam ! Clean residual mean=-0.000009 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.07141 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 39 components and 0.07141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092254Jy sigma=0.000671 ! Fit after self-cal, rms=0.092222Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 1.02 KP 0.95 ! LA 1.00 MK 1.08 NL 0.97 OV 1.12 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.01 KP 1.02 ! LA 0.92 MK 1.02 NL 1.12 OV 1.12 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.06 KP 1.01 ! LA 0.90 MK 1.09 NL 1.00 OV 1.01 ! PT 0.92 SC 1.13 ! ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.78 HN 0.67 KP 1.00* ! LA 1.00* MK 0.95 NL 1.00* OV 1.00* ! PT 0.81 SC 1.00* ! ! ! Fit before self-cal, rms=0.092222Jy sigma=0.000670 ! Fit after self-cal, rms=0.092407Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.961 mas, bmaj=7.929 mas, bpa=-5.236 degrees ! Estimated noise=1006.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.90073e-05 Jy ! Component: 100 - total flux cleaned = -0.000113182 Jy ! Component: 150 - total flux cleaned = -0.000112006 Jy ! Component: 200 - total flux cleaned = -0.000112197 Jy ! Total flux subtracted in 200 components = -0.000112197 Jy ! Clean residual min=-0.002915 max=0.003106 Jy/beam ! Clean residual mean=-0.000002 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0712978 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.0712978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092394Jy sigma=0.000669 ! Fit after self-cal, rms=0.092409Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092409Jy sigma=0.000669 ! Fit after self-cal, rms=0.092429Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.911 mas, bpa=-5.132 degrees ! Estimated noise=1006.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.08681e-05 Jy ! Component: 100 - total flux cleaned = -2.05149e-05 Jy ! Component: 150 - total flux cleaned = -3.7739e-05 Jy ! Component: 200 - total flux cleaned = -3.76781e-05 Jy ! Total flux subtracted in 200 components = -3.76781e-05 Jy ! Clean residual min=-0.003100 max=0.002854 Jy/beam ! Clean residual mean=-0.000005 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.0712602 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 45 components and 0.0712602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092421Jy sigma=0.000668 ! Fit after self-cal, rms=0.092432Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67419e-05 Jy ! Component: 100 - total flux cleaned = 4.39462e-05 Jy ! Component: 150 - total flux cleaned = 4.37812e-05 Jy ! Component: 200 - total flux cleaned = 4.36039e-05 Jy ! Total flux subtracted in 200 components = 4.36039e-05 Jy ! Clean residual min=-0.003085 max=0.002804 Jy/beam ! Clean residual mean=-0.000004 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.0713038 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.0713038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092425Jy sigma=0.000668 ! Fit after self-cal, rms=0.092424Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092424Jy sigma=0.000668 ! Fit after self-cal, rms=0.092214Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=7.874 mas, bpa=-5.062 degrees ! Estimated noise=1001.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148151 Jy ! Component: 100 - total flux cleaned = -0.000183019 Jy ! Component: 150 - total flux cleaned = -0.000183234 Jy ! Component: 200 - total flux cleaned = -0.000198875 Jy ! Total flux subtracted in 200 components = -0.000198875 Jy ! Clean residual min=-0.003050 max=0.002665 Jy/beam ! Clean residual mean=-0.000006 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0711049 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0711049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092207Jy sigma=0.000668 ! Fit after self-cal, rms=0.092207Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.232e-05 Jy ! Component: 100 - total flux cleaned = -2.26938e-05 Jy ! Component: 150 - total flux cleaned = -2.30898e-05 Jy ! Component: 200 - total flux cleaned = -3.7529e-05 Jy ! Total flux subtracted in 200 components = -3.7529e-05 Jy ! Clean residual min=-0.003081 max=0.002744 Jy/beam ! Clean residual mean=-0.000006 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0710674 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.0710674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092201Jy sigma=0.000668 ! Fit after self-cal, rms=0.092201Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092201Jy sigma=0.000668 ! Fit after self-cal, rms=0.091884Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=18.68 mas, bpa=-1.958 degrees ! Estimated noise=1286.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274038 Jy ! Component: 100 - total flux cleaned = 0.000274199 Jy ! Component: 150 - total flux cleaned = 0.000281556 Jy ! Component: 200 - total flux cleaned = 0.000288523 Jy ! Total flux subtracted in 200 components = 0.000288523 Jy ! Clean residual min=-0.004100 max=0.003448 Jy/beam ! Clean residual mean=-0.000012 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0713559 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 51 components and 0.0713559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091885Jy sigma=0.000668 ! Fit after self-cal, rms=0.091890Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.16821e-05 Jy ! Component: 100 - total flux cleaned = 4.1963e-05 Jy ! Component: 150 - total flux cleaned = 4.14763e-05 Jy ! Component: 200 - total flux cleaned = 4.10994e-05 Jy ! Total flux subtracted in 200 components = 4.10994e-05 Jy ! Clean residual min=-0.004088 max=0.003469 Jy/beam ! Clean residual mean=-0.000012 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.071397 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.071397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091892Jy sigma=0.000668 ! Fit after self-cal, rms=0.091891Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.85 mas, bpa=-5.012 degrees ! Estimated noise=996.909 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 7.85 at -5.012 degrees (North through East) ! Clean map min=-0.0029102 max=0.061445 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=6.997 mas, bpa=-4.984 degrees ! Estimated noise=1458.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0462985 Jy ! Component: 100 - total flux cleaned = 0.0585178 Jy ! Component: 150 - total flux cleaned = 0.0646277 Jy ! Component: 200 - total flux cleaned = 0.0680416 Jy ! Total flux subtracted in 200 components = 0.0680416 Jy ! Clean residual min=-0.004047 max=0.004531 Jy/beam ! Clean residual mean=-0.000005 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.0680416 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0680416 Jy ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.85 mas, bpa=-5.012 degrees ! Estimated noise=996.909 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002164 Jy ! Component: 100 - total flux cleaned = 0.00264109 Jy ! Component: 150 - total flux cleaned = 0.00279806 Jy ! Component: 200 - total flux cleaned = 0.00290367 Jy ! Total flux subtracted in 200 components = 0.00290367 Jy ! Clean residual min=-0.003102 max=0.002768 Jy/beam ! Clean residual mean=-0.000006 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0709453 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 27 components and 0.0709453 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=18.68 mas, bpa=-1.958 degrees ! Estimated noise=1286.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506011 Jy ! Component: 100 - total flux cleaned = 0.000534893 Jy ! Component: 150 - total flux cleaned = 0.000546996 Jy ! Component: 200 - total flux cleaned = 0.000558425 Jy ! Total flux subtracted in 200 components = 0.000558425 Jy ! Clean residual min=-0.004128 max=0.003427 Jy/beam ! Clean residual mean=-0.000012 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0715037 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01458e-05 Jy ! Component: 100 - total flux cleaned = 1.91666e-05 Jy ! Component: 150 - total flux cleaned = 1.91884e-05 Jy ! Component: 200 - total flux cleaned = 1.88268e-05 Jy ! Total flux subtracted in 200 components = 1.88268e-05 Jy ! Clean residual min=-0.004109 max=0.003425 Jy/beam ! Clean residual mean=-0.000012 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.0715225 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0715225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.958 mas, bmaj=7.85 mas, bpa=-5.012 degrees ! Estimated noise=996.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000458277 Jy ! Component: 100 - total flux cleaned = -0.000484754 Jy ! Component: 150 - total flux cleaned = -0.000509596 Jy ! Component: 200 - total flux cleaned = -0.000554057 Jy ! Total flux subtracted in 200 components = -0.000554057 Jy ! Clean residual min=-0.003081 max=0.002753 Jy/beam ! Clean residual mean=-0.000006 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0709685 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0709685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091904Jy sigma=0.000668 ! Fit after self-cal, rms=0.091905Jy sigma=0.000668 wmodel J2146-2326_S_2017_06_10_pus_map.mod ! Writing 40 model components to file: J2146-2326_S_2017_06_10_pus_map.mod wobs J2146-2326_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J2146-2326_S_2017_06_10_pus_uvs.fits wwins J2146-2326_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J2146-2326_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000776963 Jy ! Component: 100 - total flux cleaned = -0.00111927 Jy ! Component: 150 - total flux cleaned = -0.00112187 Jy ! Component: 200 - total flux cleaned = -0.000907208 Jy ! Component: 250 - total flux cleaned = -0.000990828 Jy ! Component: 300 - total flux cleaned = -0.00103055 Jy ! Component: 350 - total flux cleaned = -0.00106937 Jy ! Component: 400 - total flux cleaned = -0.00110774 Jy ! Component: 450 - total flux cleaned = -0.00114388 Jy ! Component: 500 - total flux cleaned = -0.00107213 Jy ! Component: 550 - total flux cleaned = -0.00103772 Jy ! Component: 600 - total flux cleaned = -0.00107163 Jy ! Component: 650 - total flux cleaned = -0.00107102 Jy ! Component: 700 - total flux cleaned = -0.00103946 Jy ! Component: 750 - total flux cleaned = -0.00103955 Jy ! Component: 800 - total flux cleaned = -0.0010395 Jy ! Component: 850 - total flux cleaned = -0.00103947 Jy ! Component: 900 - total flux cleaned = -0.00103957 Jy ! Component: 950 - total flux cleaned = -0.00112622 Jy ! Component: 1000 - total flux cleaned = -0.00106932 Jy ! Component: 1050 - total flux cleaned = -0.00109707 Jy ! Component: 1100 - total flux cleaned = -0.00115161 Jy ! Component: 1150 - total flux cleaned = -0.00112452 Jy ! Component: 1200 - total flux cleaned = -0.00115031 Jy ! Component: 1250 - total flux cleaned = -0.00115032 Jy ! Component: 1300 - total flux cleaned = -0.00115038 Jy ! Component: 1350 - total flux cleaned = -0.00112523 Jy ! Component: 1400 - total flux cleaned = -0.00122396 Jy ! Component: 1450 - total flux cleaned = -0.00119944 Jy ! Component: 1500 - total flux cleaned = -0.00119942 Jy ! Component: 1550 - total flux cleaned = -0.00122326 Jy ! Component: 1600 - total flux cleaned = -0.00124657 Jy ! Component: 1650 - total flux cleaned = -0.00124648 Jy ! Component: 1700 - total flux cleaned = -0.00126928 Jy ! Component: 1750 - total flux cleaned = -0.00135803 Jy ! Component: 1800 - total flux cleaned = -0.00140141 Jy ! Component: 1850 - total flux cleaned = -0.00142292 Jy ! Component: 1900 - total flux cleaned = -0.00157263 Jy ! Component: 1950 - total flux cleaned = -0.00153023 Jy ! Component: 2000 - total flux cleaned = -0.00161357 Jy ! Component: 2050 - total flux cleaned = -0.0016751 Jy ! Component: 2100 - total flux cleaned = -0.00177635 Jy ! Component: 2150 - total flux cleaned = -0.00187654 Jy ! Component: 2200 - total flux cleaned = -0.00199481 Jy ! Component: 2250 - total flux cleaned = -0.00203365 Jy ! Component: 2300 - total flux cleaned = -0.00209153 Jy ! Component: 2350 - total flux cleaned = -0.00216811 Jy ! Component: 2400 - total flux cleaned = -0.00224345 Jy ! Component: 2450 - total flux cleaned = -0.00231802 Jy ! Component: 2500 - total flux cleaned = -0.00241004 Jy ! Component: 2550 - total flux cleaned = -0.00250094 Jy ! Component: 2600 - total flux cleaned = -0.00253698 Jy ! Component: 2650 - total flux cleaned = -0.00266173 Jy ! Component: 2700 - total flux cleaned = -0.00274978 Jy ! Component: 2750 - total flux cleaned = -0.00288948 Jy ! Component: 2800 - total flux cleaned = -0.00299285 Jy ! Component: 2850 - total flux cleaned = -0.00307822 Jy ! Component: 2900 - total flux cleaned = -0.00314611 Jy ! Component: 2950 - total flux cleaned = -0.00322975 Jy ! Component: 3000 - total flux cleaned = -0.00332933 Jy ! Component: 3050 - total flux cleaned = -0.00337852 Jy ! Component: 3100 - total flux cleaned = -0.00349244 Jy ! Component: 3150 - total flux cleaned = -0.00357304 Jy ! Component: 3200 - total flux cleaned = -0.00358924 Jy ! Component: 3250 - total flux cleaned = -0.00362123 Jy ! Component: 3300 - total flux cleaned = -0.00376234 Jy ! Component: 3350 - total flux cleaned = -0.00374678 Jy ! Component: 3400 - total flux cleaned = -0.00387004 Jy ! Component: 3450 - total flux cleaned = -0.00396137 Jy ! Component: 3500 - total flux cleaned = -0.00405213 Jy ! Component: 3550 - total flux cleaned = -0.00415669 Jy ! Component: 3600 - total flux cleaned = -0.00412703 Jy ! Component: 3650 - total flux cleaned = -0.00424488 Jy ! Component: 3700 - total flux cleaned = -0.00428871 Jy ! Component: 3750 - total flux cleaned = -0.00438975 Jy ! Component: 3800 - total flux cleaned = -0.0043611 Jy ! Component: 3850 - total flux cleaned = -0.00444627 Jy ! Component: 3900 - total flux cleaned = -0.00446056 Jy ! Component: 3950 - total flux cleaned = -0.0045304 Jy ! Component: 4000 - total flux cleaned = -0.00447507 Jy ! Component: 4050 - total flux cleaned = -0.00444772 Jy ! Total flux subtracted in 4096 components = -0.00451612 Jy ! Clean residual min=-0.000736 max=0.000746 Jy/beam ! Clean residual mean=0.000004 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.0664523 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 351 components and 0.0664524 Jy ![Exited script file: muppet] wmap "J2146-2326_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 7.85 at -5.012 degrees (North through East) ! Clean map min=-0.0021424 max=0.060968 Jy/beam ! Writing clean map to FITS file: J2146-2326_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0609675 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00025117 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23592 1.23592 2.47184 4.94368 9.88736 19.7747 39.5494 79.0989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.958 x 7.85 at -5.012 degrees (North through East) ! Clean map min=-0.0021424 max=0.060968 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2146-2326_S_2017_06_10_pus_uvs.log closed on Mon May 6 15:02:51 2019