! Started logfile: J2146+5703_S_2017_09_26_pus_uvs.log on Sat May 11 13:07:21 2019 obs J2146+5703_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2146+5703_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.656841 visibilities/baseline/integration-bin. ! Found source: J2146+5703 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 27808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2146+5703_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 633 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 618 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 706 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1847 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997475Jy sigma=0.009659 ! Fit after self-cal, rms=0.959725Jy sigma=0.009304 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=4.669 mas, bpa=-42.2 degrees ! Estimated noise=1031.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029679 Jy ! Component: 100 - total flux cleaned = 0.036643 Jy ! Total flux subtracted in 100 components = 0.036643 Jy ! Clean residual min=-0.004285 max=0.004352 Jy/beam ! Clean residual mean=-0.000118 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.036643 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.036643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093134Jy sigma=0.000868 ! Fit after self-cal, rms=0.092116Jy sigma=0.000858 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.729 mas, bmaj=6.427 mas, bpa=-47.01 degrees ! Estimated noise=528.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108773 Jy ! Component: 100 - total flux cleaned = 0.0166594 Jy ! Component: 150 - total flux cleaned = 0.0199763 Jy ! Component: 200 - total flux cleaned = 0.0218809 Jy ! Total flux subtracted in 200 components = 0.0218809 Jy ! Clean residual min=-0.008351 max=0.008920 Jy/beam ! Clean residual mean=-0.000463 rms=0.003209 Jy/beam ! Combined flux in latest and established models = 0.0585239 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.0585239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090846Jy sigma=0.000846 ! Fit after self-cal, rms=0.090698Jy sigma=0.000844 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.89 FD 2.36 HN 1.45 KP 1.85 ! LA 0.52 MK 1.50 NL 1.64 OV 2.08 ! PT 0.56 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 1.49 HN 1.05 KP 0.95 ! LA 0.81 MK 0.96 NL 1.28 OV 1.13 ! PT 0.91 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.49 HN 1.00 KP 1.02 ! LA 0.79 MK 1.08 NL 1.29 OV 1.19 ! PT 0.85 ! ! ! Correcting IF 4. ! A total of 471 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 2.01 HN 1.00* KP 1.00* ! LA 0.66 MK 1.07 NL 1.00* OV 0.99 ! PT 0.58 ! ! ! Fit before self-cal, rms=0.090698Jy sigma=0.000844 ! Fit after self-cal, rms=0.169303Jy sigma=0.000823 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.892 mas, bmaj=6.684 mas, bpa=-45.28 degrees ! Estimated noise=592.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227164 Jy ! Component: 100 - total flux cleaned = 0.00211652 Jy ! Component: 150 - total flux cleaned = 0.00194431 Jy ! Component: 200 - total flux cleaned = 0.00180634 Jy ! Total flux subtracted in 200 components = 0.00180634 Jy ! Clean residual min=-0.006104 max=0.009794 Jy/beam ! Clean residual mean=-0.000190 rms=0.002389 Jy/beam ! Combined flux in latest and established models = 0.0603302 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 30 components and 0.0603302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169020Jy sigma=0.000824 ! Fit after self-cal, rms=0.171713Jy sigma=0.000816 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171713Jy sigma=0.000816 ! Fit after self-cal, rms=0.173066Jy sigma=0.000808 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.105 mas, bmaj=6.703 mas, bpa=-44.91 degrees ! Estimated noise=636.036 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117154 Jy ! Component: 100 - total flux cleaned = 0.00117588 Jy ! Component: 150 - total flux cleaned = 0.00117672 Jy ! Component: 200 - total flux cleaned = 0.00117795 Jy ! Total flux subtracted in 200 components = 0.00117795 Jy ! Clean residual min=-0.005040 max=0.008566 Jy/beam ! Clean residual mean=-0.000242 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 0.0615082 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0615082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172957Jy sigma=0.000808 ! Fit after self-cal, rms=0.173597Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000239892 Jy ! Component: 100 - total flux cleaned = -0.000239242 Jy ! Component: 150 - total flux cleaned = -0.000238785 Jy ! Component: 200 - total flux cleaned = -0.000255431 Jy ! Total flux subtracted in 200 components = -0.000255431 Jy ! Clean residual min=-0.004913 max=0.008141 Jy/beam ! Clean residual mean=-0.000251 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 0.0612528 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0612528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173591Jy sigma=0.000806 ! Fit after self-cal, rms=0.173579Jy sigma=0.000806 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173579Jy sigma=0.000806 ! Fit after self-cal, rms=0.181538Jy sigma=0.000806 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.194 mas, bmaj=6.67 mas, bpa=-43.89 degrees ! Estimated noise=654.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111336 Jy ! Component: 100 - total flux cleaned = 0.00107676 Jy ! Component: 150 - total flux cleaned = 0.00107683 Jy ! Component: 200 - total flux cleaned = 0.00104991 Jy ! Total flux subtracted in 200 components = 0.00104991 Jy ! Clean residual min=-0.004862 max=0.008497 Jy/beam ! Clean residual mean=-0.000239 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 0.0623027 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0623027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181465Jy sigma=0.000806 ! Fit after self-cal, rms=0.181572Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137695 Jy ! Component: 100 - total flux cleaned = -0.000137814 Jy ! Component: 150 - total flux cleaned = -0.000156392 Jy ! Component: 200 - total flux cleaned = -0.000156522 Jy ! Total flux subtracted in 200 components = -0.000156522 Jy ! Clean residual min=-0.004924 max=0.008464 Jy/beam ! Clean residual mean=-0.000243 rms=0.002210 Jy/beam ! Combined flux in latest and established models = 0.0621462 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0621462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181558Jy sigma=0.000806 ! Fit after self-cal, rms=0.181546Jy sigma=0.000806 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181546Jy sigma=0.000806 ! Fit after self-cal, rms=0.189468Jy sigma=0.000806 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.38 mas, bmaj=11.83 mas, bpa=76.49 degrees ! Estimated noise=699.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918158 Jy ! Component: 100 - total flux cleaned = 0.000966294 Jy ! Component: 150 - total flux cleaned = 0.000923338 Jy ! Component: 200 - total flux cleaned = 0.000903849 Jy ! Total flux subtracted in 200 components = 0.000903849 Jy ! Clean residual min=-0.006468 max=0.010872 Jy/beam ! Clean residual mean=-0.000374 rms=0.003168 Jy/beam ! Combined flux in latest and established models = 0.06305 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.06305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189436Jy sigma=0.000806 ! Fit after self-cal, rms=0.189522Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.992e-05 Jy ! Component: 100 - total flux cleaned = -3.11693e-05 Jy ! Component: 150 - total flux cleaned = -4.61842e-05 Jy ! Component: 200 - total flux cleaned = -6.02897e-05 Jy ! Total flux subtracted in 200 components = -6.02897e-05 Jy ! Clean residual min=-0.006448 max=0.010838 Jy/beam ! Clean residual mean=-0.000376 rms=0.003169 Jy/beam ! Combined flux in latest and established models = 0.0629897 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0629897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189510Jy sigma=0.000806 ! Fit after self-cal, rms=0.189496Jy sigma=0.000806 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.282 mas, bmaj=6.649 mas, bpa=-42.98 degrees ! Estimated noise=672.242 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.282 x 6.649 at -42.98 degrees (North through East) ! Clean map min=-0.004943 max=0.051059 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=4.668 mas, bpa=-34.3 degrees ! Estimated noise=1483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392441 Jy ! Component: 100 - total flux cleaned = 0.050167 Jy ! Component: 150 - total flux cleaned = 0.0557677 Jy ! Component: 200 - total flux cleaned = 0.0572419 Jy ! Total flux subtracted in 200 components = 0.0572419 Jy ! Clean residual min=-0.005271 max=0.006348 Jy/beam ! Clean residual mean=-0.000101 rms=0.001453 Jy/beam ! Combined flux in latest and established models = 0.0572419 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0572419 Jy ! Inverting map and beam ! Estimated beam: bmin=5.282 mas, bmaj=6.649 mas, bpa=-42.98 degrees ! Estimated noise=672.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00372312 Jy ! Component: 100 - total flux cleaned = 0.00495072 Jy ! Component: 150 - total flux cleaned = 0.00513324 Jy ! Component: 200 - total flux cleaned = 0.00521045 Jy ! Total flux subtracted in 200 components = 0.00521045 Jy ! Clean residual min=-0.005121 max=0.008557 Jy/beam ! Clean residual mean=-0.000248 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.0624523 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.0624523 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.38 mas, bmaj=11.83 mas, bpa=76.49 degrees ! Estimated noise=699.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221229 Jy ! Component: 100 - total flux cleaned = 0.000269948 Jy ! Component: 150 - total flux cleaned = 0.000266676 Jy ! Component: 200 - total flux cleaned = 0.000247254 Jy ! Total flux subtracted in 200 components = 0.000247254 Jy ! Clean residual min=-0.006581 max=0.010849 Jy/beam ! Clean residual mean=-0.000380 rms=0.003178 Jy/beam ! Combined flux in latest and established models = 0.0626996 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.12066e-06 Jy ! Component: 100 - total flux cleaned = -1.82185e-06 Jy ! Component: 150 - total flux cleaned = -3.96714e-06 Jy ! Component: 200 - total flux cleaned = -1.74676e-05 Jy ! Total flux subtracted in 200 components = -1.74676e-05 Jy ! Clean residual min=-0.006578 max=0.010861 Jy/beam ! Clean residual mean=-0.000380 rms=0.003177 Jy/beam ! Combined flux in latest and established models = 0.0626821 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.0626821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.282 mas, bmaj=6.649 mas, bpa=-42.98 degrees ! Estimated noise=672.242 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100511 Jy ! Component: 100 - total flux cleaned = 1.52874e-06 Jy ! Component: 150 - total flux cleaned = 2.19979e-05 Jy ! Component: 200 - total flux cleaned = 2.32916e-05 Jy ! Total flux subtracted in 200 components = 2.32916e-05 Jy ! Clean residual min=-0.005075 max=0.008666 Jy/beam ! Clean residual mean=-0.000246 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 0.0627054 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0627054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189457Jy sigma=0.000806 ! Fit after self-cal, rms=0.189412Jy sigma=0.000806 wmodel J2146+5703_S_2017_09_26_pus_map.mod ! Writing 41 model components to file: J2146+5703_S_2017_09_26_pus_map.mod wobs J2146+5703_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2146+5703_S_2017_09_26_pus_uvs.fits wwins J2146+5703_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2146+5703_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377161 Jy ! Component: 100 - total flux cleaned = 0.00677966 Jy ! Component: 150 - total flux cleaned = 0.00942472 Jy ! Component: 200 - total flux cleaned = 0.011865 Jy ! Component: 250 - total flux cleaned = 0.0140505 Jy ! Component: 300 - total flux cleaned = 0.0155911 Jy ! Component: 350 - total flux cleaned = 0.01681 Jy ! Component: 400 - total flux cleaned = 0.0180541 Jy ! Component: 450 - total flux cleaned = 0.0189513 Jy ! Component: 500 - total flux cleaned = 0.0194547 Jy ! Component: 550 - total flux cleaned = 0.0198048 Jy ! Component: 600 - total flux cleaned = 0.0202112 Jy ! Component: 650 - total flux cleaned = 0.0204082 Jy ! Component: 700 - total flux cleaned = 0.0207907 Jy ! Component: 750 - total flux cleaned = 0.0211632 Jy ! Component: 800 - total flux cleaned = 0.0214679 Jy ! Component: 850 - total flux cleaned = 0.0218256 Jy ! Component: 900 - total flux cleaned = 0.0220589 Jy ! Component: 950 - total flux cleaned = 0.0223456 Jy ! Component: 1000 - total flux cleaned = 0.0226271 Jy ! Component: 1050 - total flux cleaned = 0.0227933 Jy ! Component: 1100 - total flux cleaned = 0.0228477 Jy ! Component: 1150 - total flux cleaned = 0.0231687 Jy ! Component: 1200 - total flux cleaned = 0.0234832 Jy ! Component: 1250 - total flux cleaned = 0.0236387 Jy ! Component: 1300 - total flux cleaned = 0.02374 Jy ! Component: 1350 - total flux cleaned = 0.0239414 Jy ! Component: 1400 - total flux cleaned = 0.0238921 Jy ! Component: 1450 - total flux cleaned = 0.0241876 Jy ! Component: 1500 - total flux cleaned = 0.0242847 Jy ! Component: 1550 - total flux cleaned = 0.0246218 Jy ! Component: 1600 - total flux cleaned = 0.0248597 Jy ! Component: 1650 - total flux cleaned = 0.0249534 Jy ! Component: 1700 - total flux cleaned = 0.0254639 Jy ! Component: 1750 - total flux cleaned = 0.025831 Jy ! Component: 1800 - total flux cleaned = 0.0261488 Jy ! Component: 1850 - total flux cleaned = 0.0266427 Jy ! Component: 1900 - total flux cleaned = 0.0269092 Jy ! Component: 1950 - total flux cleaned = 0.0271737 Jy ! Component: 2000 - total flux cleaned = 0.027523 Jy ! Component: 2050 - total flux cleaned = 0.0278685 Jy ! Component: 2100 - total flux cleaned = 0.028168 Jy ! Component: 2150 - total flux cleaned = 0.0285914 Jy ! Component: 2200 - total flux cleaned = 0.0290113 Jy ! Component: 2250 - total flux cleaned = 0.0292613 Jy ! Component: 2300 - total flux cleaned = 0.0295504 Jy ! Component: 2350 - total flux cleaned = 0.0297967 Jy ! Component: 2400 - total flux cleaned = 0.0300002 Jy ! Component: 2450 - total flux cleaned = 0.0304042 Jy ! Component: 2500 - total flux cleaned = 0.0307652 Jy ! Component: 2550 - total flux cleaned = 0.0312032 Jy ! Component: 2600 - total flux cleaned = 0.0316377 Jy ! Component: 2650 - total flux cleaned = 0.0321085 Jy ! Component: 2700 - total flux cleaned = 0.0324204 Jy ! Component: 2750 - total flux cleaned = 0.0329241 Jy ! Component: 2800 - total flux cleaned = 0.0333475 Jy ! Component: 2850 - total flux cleaned = 0.0338836 Jy ! Component: 2900 - total flux cleaned = 0.034493 Jy ! Component: 2950 - total flux cleaned = 0.0351751 Jy ! Component: 3000 - total flux cleaned = 0.035816 Jy ! Component: 3050 - total flux cleaned = 0.0363789 Jy ! Component: 3100 - total flux cleaned = 0.0370141 Jy ! Component: 3150 - total flux cleaned = 0.037647 Jy ! Component: 3200 - total flux cleaned = 0.0383513 Jy ! Component: 3250 - total flux cleaned = 0.0389051 Jy ! Component: 3300 - total flux cleaned = 0.0396036 Jy ! Component: 3350 - total flux cleaned = 0.0402627 Jy ! Component: 3400 - total flux cleaned = 0.0409193 Jy ! Component: 3450 - total flux cleaned = 0.0416095 Jy ! Component: 3500 - total flux cleaned = 0.0421164 Jy ! Component: 3550 - total flux cleaned = 0.0427655 Jy ! Component: 3600 - total flux cleaned = 0.0434121 Jy ! Component: 3650 - total flux cleaned = 0.0440564 Jy ! Component: 3700 - total flux cleaned = 0.0446628 Jy ! Component: 3750 - total flux cleaned = 0.0452315 Jy ! Component: 3800 - total flux cleaned = 0.0457632 Jy ! Component: 3850 - total flux cleaned = 0.0463637 Jy ! Component: 3900 - total flux cleaned = 0.0468566 Jy ! Component: 3950 - total flux cleaned = 0.0473836 Jy ! Component: 4000 - total flux cleaned = 0.0479092 Jy ! Component: 4050 - total flux cleaned = 0.0484334 Jy ! Total flux subtracted in 4096 components = 0.0488171 Jy ! Clean residual min=-0.001867 max=0.002078 Jy/beam ! Clean residual mean=0.000033 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.111522 Jy keep ! Adding 411 model components to the UV plane model. ! The established model now contains 451 components and 0.111522 Jy ![Exited script file: muppet] wmap "J2146+5703_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.282 x 6.649 at -42.98 degrees (North through East) ! Clean map min=-0.0039383 max=0.053734 Jy/beam ! Writing clean map to FITS file: J2146+5703_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0537336 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000835977 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.66734 4.66734 9.33468 18.6694 37.3387 74.6774 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.282 x 6.649 at -42.98 degrees (North through East) ! Clean map min=-0.0039383 max=0.053734 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2146+5703_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:07:27 2019