! Started logfile: J2146+0427_S_2017_07_09_pus_uvs.log on Wed May 8 14:58:23 2019 obs J2146+0427_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J2146+0427_S_2017_07_09_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.952878 visibilities/baseline/integration-bin. ! Found source: J2146+0427 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 14236 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2146+0427_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 438 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.843608Jy sigma=0.008050 ! Fit after self-cal, rms=0.831459Jy sigma=0.007936 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=7.067 mas, bpa=-6.406 degrees ! Estimated noise=920.489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129247 Jy ! Component: 100 - total flux cleaned = 0.160499 Jy ! Total flux subtracted in 100 components = 0.160499 Jy ! Clean residual min=-0.007237 max=0.012754 Jy/beam ! Clean residual mean=-0.000003 rms=0.002216 Jy/beam ! Combined flux in latest and established models = 0.160499 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.160499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083667Jy sigma=0.000761 ! Fit after self-cal, rms=0.083667Jy sigma=0.000761 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.822 mas, bpa=-4.195 degrees ! Estimated noise=705.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161009 Jy ! Component: 100 - total flux cleaned = 0.0239039 Jy ! Component: 150 - total flux cleaned = 0.0282905 Jy ! Component: 200 - total flux cleaned = 0.0308735 Jy ! Total flux subtracted in 200 components = 0.0308735 Jy ! Clean residual min=-0.007052 max=0.006216 Jy/beam ! Clean residual mean=-0.000014 rms=0.001467 Jy/beam ! Combined flux in latest and established models = 0.191373 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 44 components and 0.191373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080551Jy sigma=0.000734 ! Fit after self-cal, rms=0.080550Jy sigma=0.000734 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.90 KP 1.03 ! LA 0.99 MK 1.24 NL 0.87 OV 1.02 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 0.96 KP 0.98 ! LA 0.97 MK 1.05 NL 1.02 OV 1.03 ! PT 0.99 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.03 HN 0.91 KP 0.96 ! LA 0.99 MK 1.24 NL 0.96 OV 0.95 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.87 KP 1.00* ! LA 1.10 MK 0.98 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.080550Jy sigma=0.000734 ! Fit after self-cal, rms=0.080767Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.383 mas, bmaj=7.918 mas, bpa=-3.714 degrees ! Estimated noise=709.682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00196027 Jy ! Component: 100 - total flux cleaned = -0.00206771 Jy ! Component: 150 - total flux cleaned = -0.00197522 Jy ! Component: 200 - total flux cleaned = -0.00181573 Jy ! Total flux subtracted in 200 components = -0.00181573 Jy ! Clean residual min=-0.006214 max=0.006330 Jy/beam ! Clean residual mean=-0.000016 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.189557 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.189557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080536Jy sigma=0.000716 ! Fit after self-cal, rms=0.080530Jy sigma=0.000716 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080530Jy sigma=0.000716 ! Fit after self-cal, rms=0.089258Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.905 mas, bpa=-3.839 degrees ! Estimated noise=713.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017485 Jy ! Component: 100 - total flux cleaned = -0.00222444 Jy ! Component: 150 - total flux cleaned = -0.00264411 Jy ! Component: 200 - total flux cleaned = -0.00301357 Jy ! Total flux subtracted in 200 components = -0.00301357 Jy ! Clean residual min=-0.002623 max=0.002416 Jy/beam ! Clean residual mean=-0.000004 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.186543 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.186543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089123Jy sigma=0.000671 ! Fit after self-cal, rms=0.089311Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219776 Jy ! Component: 100 - total flux cleaned = -0.000363821 Jy ! Component: 150 - total flux cleaned = -0.000484156 Jy ! Component: 200 - total flux cleaned = -0.000561076 Jy ! Total flux subtracted in 200 components = -0.000561076 Jy ! Clean residual min=-0.002547 max=0.002362 Jy/beam ! Clean residual mean=-0.000004 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.185982 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 0.185982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089296Jy sigma=0.000671 ! Fit after self-cal, rms=0.089293Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089293Jy sigma=0.000671 ! Fit after self-cal, rms=0.093631Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=7.913 mas, bpa=-3.789 degrees ! Estimated noise=712.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000898344 Jy ! Component: 100 - total flux cleaned = -0.00113984 Jy ! Component: 150 - total flux cleaned = -0.00124493 Jy ! Component: 200 - total flux cleaned = -0.00134167 Jy ! Total flux subtracted in 200 components = -0.00134167 Jy ! Clean residual min=-0.002119 max=0.001876 Jy/beam ! Clean residual mean=-0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.184641 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.184641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093607Jy sigma=0.000667 ! Fit after self-cal, rms=0.093626Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.58996e-05 Jy ! Component: 100 - total flux cleaned = -0.00015041 Jy ! Component: 150 - total flux cleaned = -0.00022852 Jy ! Component: 200 - total flux cleaned = -0.000265479 Jy ! Total flux subtracted in 200 components = -0.000265479 Jy ! Clean residual min=-0.002065 max=0.001891 Jy/beam ! Clean residual mean=-0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.184375 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.184375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093613Jy sigma=0.000667 ! Fit after self-cal, rms=0.093613Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093613Jy sigma=0.000667 ! Fit after self-cal, rms=0.093998Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.661 mas, bmaj=12.08 mas, bpa=-3.378 degrees ! Estimated noise=862.366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000876995 Jy ! Component: 100 - total flux cleaned = -0.000979229 Jy ! Component: 150 - total flux cleaned = -0.00107526 Jy ! Component: 200 - total flux cleaned = -0.00113364 Jy ! Total flux subtracted in 200 components = -0.00113364 Jy ! Clean residual min=-0.002019 max=0.001847 Jy/beam ! Clean residual mean=-0.000004 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.183242 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 72 components and 0.183242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094003Jy sigma=0.000667 ! Fit after self-cal, rms=0.094004Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.78799e-06 Jy ! Component: 100 - total flux cleaned = -3.07249e-05 Jy ! Component: 150 - total flux cleaned = -7.06173e-05 Jy ! Component: 200 - total flux cleaned = -0.000113316 Jy ! Total flux subtracted in 200 components = -0.000113316 Jy ! Clean residual min=-0.001971 max=0.001863 Jy/beam ! Clean residual mean=-0.000004 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.183128 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 77 components and 0.183128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094006Jy sigma=0.000667 ! Fit after self-cal, rms=0.094004Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=7.917 mas, bpa=-3.71 degrees ! Estimated noise=711.619 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 7.917 at -3.71 degrees (North through East) ! Clean map min=-0.0019277 max=0.17175 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=7.122 mas, bpa=-5.955 degrees ! Estimated noise=946.304 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132754 Jy ! Component: 100 - total flux cleaned = 0.162313 Jy ! Component: 150 - total flux cleaned = 0.172884 Jy ! Component: 200 - total flux cleaned = 0.178061 Jy ! Total flux subtracted in 200 components = 0.178061 Jy ! Clean residual min=-0.002680 max=0.003707 Jy/beam ! Clean residual mean=-0.000001 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.17806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.17806 Jy ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=7.917 mas, bpa=-3.71 degrees ! Estimated noise=711.619 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345978 Jy ! Component: 100 - total flux cleaned = 0.00494501 Jy ! Component: 150 - total flux cleaned = 0.00509713 Jy ! Component: 200 - total flux cleaned = 0.00527151 Jy ! Total flux subtracted in 200 components = 0.00527151 Jy ! Clean residual min=-0.002145 max=0.001851 Jy/beam ! Clean residual mean=-0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.183332 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.183332 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.661 mas, bmaj=12.08 mas, bpa=-3.378 degrees ! Estimated noise=862.366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000443658 Jy ! Component: 100 - total flux cleaned = 0.000599778 Jy ! Component: 150 - total flux cleaned = 0.000688871 Jy ! Component: 200 - total flux cleaned = 0.000703065 Jy ! Total flux subtracted in 200 components = 0.000703065 Jy ! Clean residual min=-0.001870 max=0.001924 Jy/beam ! Clean residual mean=-0.000004 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.184035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.32826e-05 Jy ! Component: 100 - total flux cleaned = 3.71792e-05 Jy ! Component: 150 - total flux cleaned = 4.84026e-05 Jy ! Component: 200 - total flux cleaned = 5.90337e-05 Jy ! Total flux subtracted in 200 components = 5.90337e-05 Jy ! Clean residual min=-0.001878 max=0.001932 Jy/beam ! Clean residual mean=-0.000004 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.184094 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 52 components and 0.184094 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.381 mas, bmaj=7.917 mas, bpa=-3.71 degrees ! Estimated noise=711.619 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.61006e-05 Jy ! Component: 100 - total flux cleaned = -1.42152e-05 Jy ! Component: 150 - total flux cleaned = -1.5331e-05 Jy ! Component: 200 - total flux cleaned = -3.69229e-05 Jy ! Total flux subtracted in 200 components = -3.69229e-05 Jy ! Clean residual min=-0.002155 max=0.001826 Jy/beam ! Clean residual mean=-0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.184057 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.184057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093943Jy sigma=0.000667 ! Fit after self-cal, rms=0.093932Jy sigma=0.000667 wmodel J2146+0427_S_2017_07_09_pus_map.mod ! Writing 71 model components to file: J2146+0427_S_2017_07_09_pus_map.mod wobs J2146+0427_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J2146+0427_S_2017_07_09_pus_uvs.fits wwins J2146+0427_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J2146+0427_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237833 Jy ! Component: 100 - total flux cleaned = -0.00039179 Jy ! Component: 150 - total flux cleaned = -0.000535764 Jy ! Component: 200 - total flux cleaned = -0.000647006 Jy ! Component: 250 - total flux cleaned = -0.00070108 Jy ! Component: 300 - total flux cleaned = -0.00088679 Jy ! Component: 350 - total flux cleaned = -0.000989981 Jy ! Component: 400 - total flux cleaned = -0.00114161 Jy ! Component: 450 - total flux cleaned = -0.00138859 Jy ! Component: 500 - total flux cleaned = -0.00141257 Jy ! Component: 550 - total flux cleaned = -0.00148356 Jy ! Component: 600 - total flux cleaned = -0.00152972 Jy ! Component: 650 - total flux cleaned = -0.00155238 Jy ! Component: 700 - total flux cleaned = -0.00164294 Jy ! Component: 750 - total flux cleaned = -0.00166524 Jy ! Component: 800 - total flux cleaned = -0.00175302 Jy ! Component: 850 - total flux cleaned = -0.00188285 Jy ! Component: 900 - total flux cleaned = -0.00190382 Jy ! Component: 950 - total flux cleaned = -0.00196699 Jy ! Component: 1000 - total flux cleaned = -0.00205056 Jy ! Component: 1050 - total flux cleaned = -0.00207158 Jy ! Component: 1100 - total flux cleaned = -0.0022347 Jy ! Component: 1150 - total flux cleaned = -0.00243586 Jy ! Component: 1200 - total flux cleaned = -0.00255499 Jy ! Component: 1250 - total flux cleaned = -0.00265344 Jy ! Component: 1300 - total flux cleaned = -0.00275084 Jy ! Component: 1350 - total flux cleaned = -0.00280898 Jy ! Component: 1400 - total flux cleaned = -0.00290452 Jy ! Component: 1450 - total flux cleaned = -0.00294286 Jy ! Component: 1500 - total flux cleaned = -0.00309257 Jy ! Component: 1550 - total flux cleaned = -0.00314804 Jy ! Component: 1600 - total flux cleaned = -0.00323964 Jy ! Component: 1650 - total flux cleaned = -0.00342148 Jy ! Component: 1700 - total flux cleaned = -0.00343938 Jy ! Component: 1750 - total flux cleaned = -0.00354653 Jy ! Component: 1800 - total flux cleaned = -0.00365255 Jy ! Component: 1850 - total flux cleaned = -0.00374023 Jy ! Component: 1900 - total flux cleaned = -0.00382708 Jy ! Component: 1950 - total flux cleaned = -0.00387871 Jy ! Component: 2000 - total flux cleaned = -0.00389593 Jy ! Component: 2050 - total flux cleaned = -0.00406535 Jy ! Component: 2100 - total flux cleaned = -0.00413265 Jy ! Component: 2150 - total flux cleaned = -0.00424921 Jy ! Component: 2200 - total flux cleaned = -0.00429877 Jy ! Component: 2250 - total flux cleaned = -0.00441365 Jy ! Component: 2300 - total flux cleaned = -0.00454355 Jy ! Component: 2350 - total flux cleaned = -0.00457562 Jy ! Component: 2400 - total flux cleaned = -0.00470372 Jy ! Component: 2450 - total flux cleaned = -0.00481494 Jy ! Component: 2500 - total flux cleaned = -0.00489375 Jy ! Component: 2550 - total flux cleaned = -0.00492505 Jy ! Component: 2600 - total flux cleaned = -0.00500276 Jy ! Component: 2650 - total flux cleaned = -0.0050491 Jy ! Component: 2700 - total flux cleaned = -0.00518689 Jy ! Component: 2750 - total flux cleaned = -0.00521732 Jy ! Component: 2800 - total flux cleaned = -0.00530807 Jy ! Component: 2850 - total flux cleaned = -0.00541278 Jy ! Component: 2900 - total flux cleaned = -0.0054277 Jy ! Component: 2950 - total flux cleaned = -0.00548679 Jy ! Component: 3000 - total flux cleaned = -0.00556027 Jy ! Component: 3050 - total flux cleaned = -0.00561853 Jy ! Component: 3100 - total flux cleaned = -0.00573462 Jy ! Component: 3150 - total flux cleaned = -0.00580653 Jy ! Component: 3200 - total flux cleaned = -0.00584951 Jy ! Component: 3250 - total flux cleaned = -0.00590623 Jy ! Component: 3300 - total flux cleaned = -0.00593443 Jy ! Component: 3350 - total flux cleaned = -0.00604663 Jy ! Component: 3400 - total flux cleaned = -0.00610224 Jy ! Component: 3450 - total flux cleaned = -0.00614375 Jy ! Component: 3500 - total flux cleaned = -0.00618512 Jy ! Component: 3550 - total flux cleaned = -0.00628094 Jy ! Component: 3600 - total flux cleaned = -0.00636251 Jy ! Component: 3650 - total flux cleaned = -0.006376 Jy ! Component: 3700 - total flux cleaned = -0.00638947 Jy ! Component: 3750 - total flux cleaned = -0.00646967 Jy ! Component: 3800 - total flux cleaned = -0.00652292 Jy ! Component: 3850 - total flux cleaned = -0.00658916 Jy ! Component: 3900 - total flux cleaned = -0.00664187 Jy ! Component: 3950 - total flux cleaned = -0.00665488 Jy ! Component: 4000 - total flux cleaned = -0.00673298 Jy ! Component: 4050 - total flux cleaned = -0.0067589 Jy ! Total flux subtracted in 4096 components = -0.00683608 Jy ! Clean residual min=-0.000906 max=0.000693 Jy/beam ! Clean residual mean=-0.000002 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.177221 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 386 components and 0.177221 Jy ![Exited script file: muppet] wmap "J2146+0427_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 7.917 at -3.71 degrees (North through East) ! Clean map min=-0.0015783 max=0.17197 Jy/beam ! Writing clean map to FITS file: J2146+0427_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.17197 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240577 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.419684 0.419684 0.839369 1.67874 3.35747 6.71495 13.4299 26.8598 53.7196 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.171 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.381 x 7.917 at -3.71 degrees (North through East) ! Clean map min=-0.0015783 max=0.17197 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2146+0427_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:58:27 2019