! Started logfile: J2145-0434_S_2017_10_09_pus_uvs.log on Sun May 12 13:21:08 2019 obs J2145-0434_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2145-0434_S_2017_10_09_pus_uva.fits ! AN table 1: 239 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.508484 visibilities/baseline/integration-bin. ! Found source: J2145-0434 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 17500 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2145-0434_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 724 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 882 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1546 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002470Jy sigma=0.008653 ! Fit after self-cal, rms=0.956671Jy sigma=0.008283 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=12.31 mas, bpa=-18.14 degrees ! Estimated noise=1083.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363329 Jy ! Component: 100 - total flux cleaned = 0.0445194 Jy ! Total flux subtracted in 100 components = 0.0445194 Jy ! Clean residual min=-0.003479 max=0.004558 Jy/beam ! Clean residual mean=0.000004 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.0445194 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0445194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078174Jy sigma=0.000620 ! Fit after self-cal, rms=0.076727Jy sigma=0.000608 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.355 mas, bmaj=13.65 mas, bpa=-17.67 degrees ! Estimated noise=772.659 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371515 Jy ! Component: 100 - total flux cleaned = 0.00502205 Jy ! Component: 150 - total flux cleaned = 0.00516755 Jy ! Component: 200 - total flux cleaned = 0.00525208 Jy ! Total flux subtracted in 200 components = 0.00525208 Jy ! Clean residual min=-0.002497 max=0.002616 Jy/beam ! Clean residual mean=0.000008 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0497714 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.0497715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076504Jy sigma=0.000606 ! Fit after self-cal, rms=0.076462Jy sigma=0.000606 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 0.94 KP 1.02 ! LA 1.00 MK 1.11 NL 1.05 OV 1.00* ! PT 1.08 ! ! ! Correcting IF 2. ! A total of 255 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.01 KP 1.03 ! LA 1.00 MK 1.06 NL 1.10 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.02 KP 0.92 ! LA 0.82 MK 1.08 NL 1.00 OV 1.00* ! PT 1.11 ! ! ! Correcting IF 4. ! A total of 309 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 0.94 KP 1.00* ! LA 0.70 MK 0.68 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.076462Jy sigma=0.000606 ! Fit after self-cal, rms=0.077134Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.387 mas, bmaj=13.5 mas, bpa=-17.56 degrees ! Estimated noise=808.604 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000168525 Jy ! Component: 100 - total flux cleaned = 0.000134104 Jy ! Component: 150 - total flux cleaned = 7.11184e-05 Jy ! Component: 200 - total flux cleaned = 1.51672e-05 Jy ! Total flux subtracted in 200 components = 1.51672e-05 Jy ! Clean residual min=-0.001938 max=0.002229 Jy/beam ! Clean residual mean=0.000004 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0497866 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0497866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077095Jy sigma=0.000608 ! Fit after self-cal, rms=0.077027Jy sigma=0.000608 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077027Jy sigma=0.000608 ! Fit after self-cal, rms=0.075105Jy sigma=0.000606 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.404 mas, bmaj=13.43 mas, bpa=-17.68 degrees ! Estimated noise=802.283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.69555e-05 Jy ! Component: 100 - total flux cleaned = -8.18726e-05 Jy ! Component: 150 - total flux cleaned = -4.3914e-05 Jy ! Component: 200 - total flux cleaned = -1.23813e-05 Jy ! Total flux subtracted in 200 components = -1.23813e-05 Jy ! Clean residual min=-0.001794 max=0.001610 Jy/beam ! Clean residual mean=0.000003 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0497742 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.0497742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075093Jy sigma=0.000606 ! Fit after self-cal, rms=0.075107Jy sigma=0.000605 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135601 Jy ! Component: 100 - total flux cleaned = -0.000182315 Jy ! Component: 150 - total flux cleaned = -0.000219503 Jy ! Component: 200 - total flux cleaned = -0.00023623 Jy ! Total flux subtracted in 200 components = -0.00023623 Jy ! Clean residual min=-0.001626 max=0.001659 Jy/beam ! Clean residual mean=0.000003 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.049538 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.049538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075095Jy sigma=0.000605 ! Fit after self-cal, rms=0.075084Jy sigma=0.000605 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075084Jy sigma=0.000605 ! Fit after self-cal, rms=0.075301Jy sigma=0.000605 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=13.37 mas, bpa=-17.7 degrees ! Estimated noise=799.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.24506e-05 Jy ! Component: 100 - total flux cleaned = -4.14386e-05 Jy ! Component: 150 - total flux cleaned = -5.53801e-06 Jy ! Component: 200 - total flux cleaned = 3.9049e-05 Jy ! Total flux subtracted in 200 components = 3.9049e-05 Jy ! Clean residual min=-0.001710 max=0.001623 Jy/beam ! Clean residual mean=0.000003 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.049577 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 0.049577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075289Jy sigma=0.000605 ! Fit after self-cal, rms=0.075306Jy sigma=0.000604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.43803e-05 Jy ! Component: 100 - total flux cleaned = 8.21777e-05 Jy ! Component: 150 - total flux cleaned = 0.000113843 Jy ! Component: 200 - total flux cleaned = 0.000141583 Jy ! Total flux subtracted in 200 components = 0.000141583 Jy ! Clean residual min=-0.001633 max=0.001597 Jy/beam ! Clean residual mean=0.000003 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0497186 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.0497186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075297Jy sigma=0.000604 ! Fit after self-cal, rms=0.075292Jy sigma=0.000604 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075292Jy sigma=0.000604 ! Fit after self-cal, rms=0.075514Jy sigma=0.000604 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.766 mas, bmaj=14.6 mas, bpa=-11.76 degrees ! Estimated noise=984.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.26128e-05 Jy ! Component: 100 - total flux cleaned = 0.00016856 Jy ! Component: 150 - total flux cleaned = 0.000221291 Jy ! Component: 200 - total flux cleaned = 0.000221234 Jy ! Total flux subtracted in 200 components = 0.000221234 Jy ! Clean residual min=-0.001983 max=0.001702 Jy/beam ! Clean residual mean=0.000006 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0499399 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.0499399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075509Jy sigma=0.000604 ! Fit after self-cal, rms=0.075525Jy sigma=0.000604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.54461e-05 Jy ! Component: 100 - total flux cleaned = 9.90719e-05 Jy ! Component: 150 - total flux cleaned = 9.93583e-05 Jy ! Component: 200 - total flux cleaned = 9.93547e-05 Jy ! Total flux subtracted in 200 components = 9.93547e-05 Jy ! Clean residual min=-0.001967 max=0.001688 Jy/beam ! Clean residual mean=0.000006 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0500392 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 87 components and 0.0500392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075521Jy sigma=0.000604 ! Fit after self-cal, rms=0.075523Jy sigma=0.000604 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=13.36 mas, bpa=-17.72 degrees ! Estimated noise=800.108 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 13.36 at -17.72 degrees (North through East) ! Clean map min=-0.0022383 max=0.047339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=12.36 mas, bpa=-18.18 degrees ! Estimated noise=1111.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0370224 Jy ! Component: 100 - total flux cleaned = 0.0453846 Jy ! Component: 150 - total flux cleaned = 0.0458989 Jy ! Component: 200 - total flux cleaned = 0.0463569 Jy ! Total flux subtracted in 200 components = 0.0463569 Jy ! Clean residual min=-0.003306 max=0.002406 Jy/beam ! Clean residual mean=0.000001 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0463569 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0463569 Jy ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=13.36 mas, bpa=-17.72 degrees ! Estimated noise=800.108 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175253 Jy ! Component: 100 - total flux cleaned = 0.00221481 Jy ! Component: 150 - total flux cleaned = 0.00261252 Jy ! Component: 200 - total flux cleaned = 0.00279555 Jy ! Total flux subtracted in 200 components = 0.00279555 Jy ! Clean residual min=-0.001845 max=0.001753 Jy/beam ! Clean residual mean=0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0491525 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.0491525 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.766 mas, bmaj=14.6 mas, bpa=-11.76 degrees ! Estimated noise=984.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879609 Jy ! Component: 100 - total flux cleaned = 0.000984641 Jy ! Component: 150 - total flux cleaned = 0.000984265 Jy ! Component: 200 - total flux cleaned = 0.000983741 Jy ! Total flux subtracted in 200 components = 0.000983741 Jy ! Clean residual min=-0.001921 max=0.001667 Jy/beam ! Clean residual mean=0.000006 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0501362 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.71392e-07 Jy ! Component: 100 - total flux cleaned = -1.4369e-05 Jy ! Component: 150 - total flux cleaned = -1.40587e-05 Jy ! Component: 200 - total flux cleaned = -1.36901e-05 Jy ! Total flux subtracted in 200 components = -1.36901e-05 Jy ! Clean residual min=-0.001933 max=0.001663 Jy/beam ! Clean residual mean=0.000006 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0501225 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 54 components and 0.0501225 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.415 mas, bmaj=13.36 mas, bpa=-17.72 degrees ! Estimated noise=800.108 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.11271e-05 Jy ! Component: 100 - total flux cleaned = -9.31283e-05 Jy ! Component: 150 - total flux cleaned = -7.67101e-05 Jy ! Component: 200 - total flux cleaned = -7.7306e-05 Jy ! Total flux subtracted in 200 components = -7.7306e-05 Jy ! Clean residual min=-0.001663 max=0.001624 Jy/beam ! Clean residual mean=0.000003 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0500452 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0500452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075524Jy sigma=0.000604 ! Fit after self-cal, rms=0.075517Jy sigma=0.000604 wmodel J2145-0434_S_2017_10_09_pus_map.mod ! Writing 61 model components to file: J2145-0434_S_2017_10_09_pus_map.mod wobs J2145-0434_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2145-0434_S_2017_10_09_pus_uvs.fits wwins J2145-0434_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J2145-0434_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -1.69409e-05 Jy ! Component: 100 - total flux cleaned = 6.78602e-05 Jy ! Component: 150 - total flux cleaned = 9.39741e-05 Jy ! Component: 200 - total flux cleaned = 0.000168169 Jy ! Component: 250 - total flux cleaned = 0.000191916 Jy ! Component: 300 - total flux cleaned = 0.000261026 Jy ! Component: 350 - total flux cleaned = 0.000261341 Jy ! Component: 400 - total flux cleaned = 0.000325375 Jy ! Component: 450 - total flux cleaned = 0.000386738 Jy ! Component: 500 - total flux cleaned = 0.000467137 Jy ! Component: 550 - total flux cleaned = 0.000603692 Jy ! Component: 600 - total flux cleaned = 0.000736063 Jy ! Component: 650 - total flux cleaned = 0.000828197 Jy ! Component: 700 - total flux cleaned = 0.000972147 Jy ! Component: 750 - total flux cleaned = 0.00111246 Jy ! Component: 800 - total flux cleaned = 0.00128382 Jy ! Component: 850 - total flux cleaned = 0.00138434 Jy ! Component: 900 - total flux cleaned = 0.00156423 Jy ! Component: 950 - total flux cleaned = 0.00164416 Jy ! Component: 1000 - total flux cleaned = 0.00180101 Jy ! Component: 1050 - total flux cleaned = 0.00192388 Jy ! Component: 1100 - total flux cleaned = 0.00196919 Jy ! Component: 1150 - total flux cleaned = 0.00208733 Jy ! Component: 1200 - total flux cleaned = 0.00220304 Jy ! Component: 1250 - total flux cleaned = 0.00231637 Jy ! Component: 1300 - total flux cleaned = 0.0024002 Jy ! Component: 1350 - total flux cleaned = 0.00253742 Jy ! Component: 1400 - total flux cleaned = 0.00260456 Jy ! Component: 1450 - total flux cleaned = 0.00269725 Jy ! Component: 1500 - total flux cleaned = 0.00281439 Jy ! Component: 1550 - total flux cleaned = 0.00285298 Jy ! Component: 1600 - total flux cleaned = 0.00296662 Jy ! Component: 1650 - total flux cleaned = 0.00309077 Jy ! Component: 1700 - total flux cleaned = 0.00315177 Jy ! Component: 1750 - total flux cleaned = 0.00324812 Jy ! Component: 1800 - total flux cleaned = 0.00335513 Jy ! Component: 1850 - total flux cleaned = 0.00348388 Jy ! Component: 1900 - total flux cleaned = 0.00355299 Jy ! Component: 1950 - total flux cleaned = 0.00365561 Jy ! Component: 2000 - total flux cleaned = 0.00374555 Jy ! Component: 2050 - total flux cleaned = 0.00383444 Jy ! Component: 2100 - total flux cleaned = 0.0039112 Jy ! Component: 2150 - total flux cleaned = 0.00400857 Jy ! Component: 2200 - total flux cleaned = 0.00408316 Jy ! Component: 2250 - total flux cleaned = 0.00416757 Jy ! Component: 2300 - total flux cleaned = 0.00427169 Jy ! Component: 2350 - total flux cleaned = 0.00435403 Jy ! Component: 2400 - total flux cleaned = 0.00447604 Jy ! Component: 2450 - total flux cleaned = 0.00458656 Jy ! Component: 2500 - total flux cleaned = 0.00468586 Jy ! Component: 2550 - total flux cleaned = 0.00477434 Jy ! Component: 2600 - total flux cleaned = 0.00491056 Jy ! Component: 2650 - total flux cleaned = 0.00502591 Jy ! Component: 2700 - total flux cleaned = 0.00515908 Jy ! Component: 2750 - total flux cleaned = 0.00523435 Jy ! Component: 2800 - total flux cleaned = 0.00532767 Jy ! Component: 2850 - total flux cleaned = 0.00542001 Jy ! Component: 2900 - total flux cleaned = 0.00552969 Jy ! Component: 2950 - total flux cleaned = 0.00562021 Jy ! Component: 3000 - total flux cleaned = 0.00570089 Jy ! Component: 3050 - total flux cleaned = 0.00578098 Jy ! Component: 3100 - total flux cleaned = 0.00585159 Jy ! Component: 3150 - total flux cleaned = 0.00594782 Jy ! Component: 3200 - total flux cleaned = 0.00600851 Jy ! Component: 3250 - total flux cleaned = 0.00606874 Jy ! Component: 3300 - total flux cleaned = 0.00614562 Jy ! Component: 3350 - total flux cleaned = 0.00620487 Jy ! Component: 3400 - total flux cleaned = 0.00624705 Jy ! Component: 3450 - total flux cleaned = 0.00629733 Jy ! Component: 3500 - total flux cleaned = 0.00635553 Jy ! Component: 3550 - total flux cleaned = 0.00640506 Jy ! Component: 3600 - total flux cleaned = 0.00647889 Jy ! Component: 3650 - total flux cleaned = 0.00652775 Jy ! Component: 3700 - total flux cleaned = 0.00658441 Jy ! Component: 3750 - total flux cleaned = 0.00666466 Jy ! Component: 3800 - total flux cleaned = 0.00670454 Jy ! Component: 3850 - total flux cleaned = 0.0067837 Jy ! Component: 3900 - total flux cleaned = 0.00684657 Jy ! Component: 3950 - total flux cleaned = 0.00688559 Jy ! Component: 4000 - total flux cleaned = 0.00692439 Jy ! Component: 4050 - total flux cleaned = 0.00700157 Jy ! Total flux subtracted in 4096 components = 0.00702454 Jy ! Clean residual min=-0.000405 max=0.000460 Jy/beam ! Clean residual mean=0.000004 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.0570697 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 343 components and 0.0570697 Jy ![Exited script file: muppet] wmap "J2145-0434_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 13.36 at -17.72 degrees (North through East) ! Clean map min=-0.002172 max=0.047438 Jy/beam ! Writing clean map to FITS file: J2145-0434_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0474378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141648 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.895789 0.895789 1.79158 3.58316 7.16631 14.3326 28.6653 57.3305 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.415 x 13.36 at -17.72 degrees (North through East) ! Clean map min=-0.002172 max=0.047438 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2145-0434_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:14 2019