! Started logfile: J2145-0434_S_2017_09_26_pus_uvs.log on Sat May 11 13:07:14 2019 obs J2145-0434_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2145-0434_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.671769 visibilities/baseline/integration-bin. ! Found source: J2145-0434 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28440 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2145-0434_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 472 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 457 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 694 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1916 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999850Jy sigma=0.007838 ! Fit after self-cal, rms=0.951736Jy sigma=0.007511 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=25.37 mas, bpa=-19.48 degrees ! Estimated noise=1184.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406051 Jy ! Component: 100 - total flux cleaned = 0.0494763 Jy ! Total flux subtracted in 100 components = 0.0494763 Jy ! Clean residual min=-0.005254 max=0.005046 Jy/beam ! Clean residual mean=-0.000008 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.0494764 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0494764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092484Jy sigma=0.000628 ! Fit after self-cal, rms=0.091031Jy sigma=0.000617 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.483 mas, bmaj=25.28 mas, bpa=-19.11 degrees ! Estimated noise=644.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152999 Jy ! Component: 100 - total flux cleaned = 0.00165015 Jy ! Component: 150 - total flux cleaned = 0.00165558 Jy ! Component: 200 - total flux cleaned = 0.00165993 Jy ! Total flux subtracted in 200 components = 0.00165993 Jy ! Clean residual min=-0.003029 max=0.002549 Jy/beam ! Clean residual mean=-0.000008 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.0511363 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 34 components and 0.0511363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090790Jy sigma=0.000616 ! Fit after self-cal, rms=0.090675Jy sigma=0.000616 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.96 KP 1.04 ! LA 0.98 MK 1.06 NL 1.03 OV 1.12 ! PT 1.12 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.99 KP 1.00 ! LA 0.94 MK 1.05 NL 1.13 OV 1.13 ! PT 1.10 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.72 HN 0.84 KP 0.90 ! LA 0.98 MK 1.04 NL 0.94 OV 0.91 ! PT 1.11 ! ! ! Correcting IF 4. ! A total of 276 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 0.61 KP 1.00* ! LA 1.04 MK 0.85 NL 1.00* OV 0.52 ! PT 0.81 ! ! ! Fit before self-cal, rms=0.090675Jy sigma=0.000616 ! Fit after self-cal, rms=0.087909Jy sigma=0.000611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.481 mas, bmaj=25.28 mas, bpa=-19.02 degrees ! Estimated noise=655.196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293038 Jy ! Component: 100 - total flux cleaned = 0.000508673 Jy ! Component: 150 - total flux cleaned = 0.000673735 Jy ! Component: 200 - total flux cleaned = 0.000700502 Jy ! Total flux subtracted in 200 components = 0.000700502 Jy ! Clean residual min=-0.001891 max=0.002246 Jy/beam ! Clean residual mean=-0.000001 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.0518368 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 0.0518368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087857Jy sigma=0.000611 ! Fit after self-cal, rms=0.087757Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087757Jy sigma=0.000610 ! Fit after self-cal, rms=0.084110Jy sigma=0.000608 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=25.31 mas, bpa=-19.13 degrees ! Estimated noise=654.144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181978 Jy ! Component: 100 - total flux cleaned = 0.000130237 Jy ! Component: 150 - total flux cleaned = 3.71782e-05 Jy ! Component: 200 - total flux cleaned = 9.66566e-06 Jy ! Total flux subtracted in 200 components = 9.66566e-06 Jy ! Clean residual min=-0.001424 max=0.001062 Jy/beam ! Clean residual mean=0.000001 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.0518464 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 77 components and 0.0518464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084102Jy sigma=0.000608 ! Fit after self-cal, rms=0.083997Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.97652e-05 Jy ! Component: 100 - total flux cleaned = 0.000110658 Jy ! Component: 150 - total flux cleaned = 9.46294e-05 Jy ! Component: 200 - total flux cleaned = 9.50359e-05 Jy ! Total flux subtracted in 200 components = 9.50359e-05 Jy ! Clean residual min=-0.001462 max=0.001196 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0519415 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.0519415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083989Jy sigma=0.000607 ! Fit after self-cal, rms=0.083964Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083964Jy sigma=0.000607 ! Fit after self-cal, rms=0.084009Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=25.35 mas, bpa=-19.15 degrees ! Estimated noise=655.404 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159371 Jy ! Component: 100 - total flux cleaned = 0.000125378 Jy ! Component: 150 - total flux cleaned = 0.000154084 Jy ! Component: 200 - total flux cleaned = 0.000140874 Jy ! Total flux subtracted in 200 components = 0.000140874 Jy ! Clean residual min=-0.001417 max=0.001117 Jy/beam ! Clean residual mean=-0.000000 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0520824 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.0520823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084002Jy sigma=0.000607 ! Fit after self-cal, rms=0.083998Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.69408e-05 Jy ! Component: 100 - total flux cleaned = 9.77024e-05 Jy ! Component: 150 - total flux cleaned = 0.000111718 Jy ! Component: 200 - total flux cleaned = 0.000124028 Jy ! Total flux subtracted in 200 components = 0.000124028 Jy ! Clean residual min=-0.001400 max=0.001170 Jy/beam ! Clean residual mean=-0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0522064 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 109 components and 0.0522064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083992Jy sigma=0.000607 ! Fit after self-cal, rms=0.083988Jy sigma=0.000607 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083988Jy sigma=0.000607 ! Fit after self-cal, rms=0.084254Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.841 mas, bmaj=25.31 mas, bpa=-16 degrees ! Estimated noise=798.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349657 Jy ! Component: 100 - total flux cleaned = 0.00025713 Jy ! Component: 150 - total flux cleaned = 0.000220895 Jy ! Component: 200 - total flux cleaned = 0.000205576 Jy ! Total flux subtracted in 200 components = 0.000205576 Jy ! Clean residual min=-0.001151 max=0.001187 Jy/beam ! Clean residual mean=-0.000001 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0524119 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 124 components and 0.0524119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084253Jy sigma=0.000607 ! Fit after self-cal, rms=0.084236Jy sigma=0.000606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.01615e-05 Jy ! Component: 100 - total flux cleaned = 2.42407e-06 Jy ! Component: 150 - total flux cleaned = 1.86523e-05 Jy ! Component: 200 - total flux cleaned = 4.64446e-05 Jy ! Total flux subtracted in 200 components = 4.64446e-05 Jy ! Clean residual min=-0.001208 max=0.001186 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0524584 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 135 components and 0.0524584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084236Jy sigma=0.000606 ! Fit after self-cal, rms=0.084236Jy sigma=0.000606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=25.37 mas, bpa=-19.16 degrees ! Estimated noise=657.836 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 25.37 at -19.16 degrees (North through East) ! Clean map min=-0.0036583 max=0.052569 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=25.56 mas, bpa=-19.35 degrees ! Estimated noise=1133.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409971 Jy ! Component: 100 - total flux cleaned = 0.0496644 Jy ! Component: 150 - total flux cleaned = 0.0502378 Jy ! Component: 200 - total flux cleaned = 0.0504342 Jy ! Total flux subtracted in 200 components = 0.0504342 Jy ! Clean residual min=-0.002617 max=0.002335 Jy/beam ! Clean residual mean=-0.000001 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0504342 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0504342 Jy ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=25.37 mas, bpa=-19.16 degrees ! Estimated noise=657.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961106 Jy ! Component: 100 - total flux cleaned = 0.0013461 Jy ! Component: 150 - total flux cleaned = 0.001404 Jy ! Component: 200 - total flux cleaned = 0.00149691 Jy ! Total flux subtracted in 200 components = 0.00149691 Jy ! Clean residual min=-0.001609 max=0.001333 Jy/beam ! Clean residual mean=-0.000001 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0519311 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.0519311 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.841 mas, bmaj=25.31 mas, bpa=-16 degrees ! Estimated noise=798.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000102415 Jy ! Component: 100 - total flux cleaned = 0.000137901 Jy ! Component: 150 - total flux cleaned = 0.000186984 Jy ! Component: 200 - total flux cleaned = 0.0002058 Jy ! Total flux subtracted in 200 components = 0.0002058 Jy ! Clean residual min=-0.001303 max=0.001202 Jy/beam ! Clean residual mean=-0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0521369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.80703e-05 Jy ! Component: 100 - total flux cleaned = -3.18658e-05 Jy ! Component: 150 - total flux cleaned = -2.0757e-05 Jy ! Component: 200 - total flux cleaned = -1.21602e-07 Jy ! Total flux subtracted in 200 components = -1.21602e-07 Jy ! Clean residual min=-0.001260 max=0.001165 Jy/beam ! Clean residual mean=-0.000002 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0521368 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 103 components and 0.0521368 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.497 mas, bmaj=25.37 mas, bpa=-19.16 degrees ! Estimated noise=657.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130709 Jy ! Component: 100 - total flux cleaned = 0.000195156 Jy ! Component: 150 - total flux cleaned = 0.000271334 Jy ! Component: 200 - total flux cleaned = 0.000253007 Jy ! Total flux subtracted in 200 components = 0.000253007 Jy ! Clean residual min=-0.001408 max=0.001144 Jy/beam ! Clean residual mean=-0.000001 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0523898 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 127 components and 0.0523898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084243Jy sigma=0.000606 ! Fit after self-cal, rms=0.084243Jy sigma=0.000606 wmodel J2145-0434_S_2017_09_26_pus_map.mod ! Writing 127 model components to file: J2145-0434_S_2017_09_26_pus_map.mod wobs J2145-0434_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2145-0434_S_2017_09_26_pus_uvs.fits wwins J2145-0434_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J2145-0434_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000632872 Jy ! Component: 100 - total flux cleaned = -0.00104942 Jy ! Component: 150 - total flux cleaned = -0.00121131 Jy ! Component: 200 - total flux cleaned = -0.0012691 Jy ! Component: 250 - total flux cleaned = -0.00134222 Jy ! Component: 300 - total flux cleaned = -0.00142978 Jy ! Component: 350 - total flux cleaned = -0.0014977 Jy ! Component: 400 - total flux cleaned = -0.00158024 Jy ! Component: 450 - total flux cleaned = -0.00156442 Jy ! Component: 500 - total flux cleaned = -0.00157976 Jy ! Component: 550 - total flux cleaned = -0.00154944 Jy ! Component: 600 - total flux cleaned = -0.00160808 Jy ! Component: 650 - total flux cleaned = -0.00160755 Jy ! Component: 700 - total flux cleaned = -0.00160752 Jy ! Component: 750 - total flux cleaned = -0.00163513 Jy ! Component: 800 - total flux cleaned = -0.00166217 Jy ! Component: 850 - total flux cleaned = -0.00166229 Jy ! Component: 900 - total flux cleaned = -0.0017013 Jy ! Component: 950 - total flux cleaned = -0.00170099 Jy ! Component: 1000 - total flux cleaned = -0.0016757 Jy ! Component: 1050 - total flux cleaned = -0.00163854 Jy ! Component: 1100 - total flux cleaned = -0.00162641 Jy ! Component: 1150 - total flux cleaned = -0.00161451 Jy ! Component: 1200 - total flux cleaned = -0.00161466 Jy ! Component: 1250 - total flux cleaned = -0.00161469 Jy ! Component: 1300 - total flux cleaned = -0.0016035 Jy ! Component: 1350 - total flux cleaned = -0.00160317 Jy ! Component: 1400 - total flux cleaned = -0.00155902 Jy ! Component: 1450 - total flux cleaned = -0.0015374 Jy ! Component: 1500 - total flux cleaned = -0.00154795 Jy ! Component: 1550 - total flux cleaned = -0.00151632 Jy ! Component: 1600 - total flux cleaned = -0.00148528 Jy ! Component: 1650 - total flux cleaned = -0.00147502 Jy ! Component: 1700 - total flux cleaned = -0.00144456 Jy ! Component: 1750 - total flux cleaned = -0.00139453 Jy ! Component: 1800 - total flux cleaned = -0.0013846 Jy ! Component: 1850 - total flux cleaned = -0.00133563 Jy ! Component: 1900 - total flux cleaned = -0.00129695 Jy ! Component: 1950 - total flux cleaned = -0.0012777 Jy ! Component: 2000 - total flux cleaned = -0.00124923 Jy ! Component: 2050 - total flux cleaned = -0.0012492 Jy ! Component: 2100 - total flux cleaned = -0.00121186 Jy ! Component: 2150 - total flux cleaned = -0.00121188 Jy ! Component: 2200 - total flux cleaned = -0.00119347 Jy ! Component: 2250 - total flux cleaned = -0.00119344 Jy ! Component: 2300 - total flux cleaned = -0.00117537 Jy ! Component: 2350 - total flux cleaned = -0.00118428 Jy ! Component: 2400 - total flux cleaned = -0.00118423 Jy ! Component: 2450 - total flux cleaned = -0.00116643 Jy ! Component: 2500 - total flux cleaned = -0.00114874 Jy ! Component: 2550 - total flux cleaned = -0.00112246 Jy ! Component: 2600 - total flux cleaned = -0.00110502 Jy ! Component: 2650 - total flux cleaned = -0.00109637 Jy ! Component: 2700 - total flux cleaned = -0.00107056 Jy ! Component: 2750 - total flux cleaned = -0.0010963 Jy ! Component: 2800 - total flux cleaned = -0.00106217 Jy ! Component: 2850 - total flux cleaned = -0.00105374 Jy ! Component: 2900 - total flux cleaned = -0.00104531 Jy ! Component: 2950 - total flux cleaned = -0.00101178 Jy ! Component: 3000 - total flux cleaned = -0.00102854 Jy ! Component: 3050 - total flux cleaned = -0.00100348 Jy ! Component: 3100 - total flux cleaned = -0.000962078 Jy ! Component: 3150 - total flux cleaned = -0.000962041 Jy ! Component: 3200 - total flux cleaned = -0.000921003 Jy ! Component: 3250 - total flux cleaned = -0.00090468 Jy ! Component: 3300 - total flux cleaned = -0.000863982 Jy ! Component: 3350 - total flux cleaned = -0.000872117 Jy ! Component: 3400 - total flux cleaned = -0.00085593 Jy ! Component: 3450 - total flux cleaned = -0.000847859 Jy ! Component: 3500 - total flux cleaned = -0.000847836 Jy ! Component: 3550 - total flux cleaned = -0.000839864 Jy ! Component: 3600 - total flux cleaned = -0.000839854 Jy ! Component: 3650 - total flux cleaned = -0.000815941 Jy ! Component: 3700 - total flux cleaned = -0.000800034 Jy ! Component: 3750 - total flux cleaned = -0.000776218 Jy ! Component: 3800 - total flux cleaned = -0.000760349 Jy ! Component: 3850 - total flux cleaned = -0.000744543 Jy ! Component: 3900 - total flux cleaned = -0.000728731 Jy ! Component: 3950 - total flux cleaned = -0.000720844 Jy ! Component: 4000 - total flux cleaned = -0.000705122 Jy ! Component: 4050 - total flux cleaned = -0.00066584 Jy ! Total flux subtracted in 4096 components = -0.000657973 Jy ! Clean residual min=-0.000431 max=0.000450 Jy/beam ! Clean residual mean=0.000004 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.0517319 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 423 components and 0.0517319 Jy ![Exited script file: muppet] wmap "J2145-0434_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 25.37 at -19.16 degrees (North through East) ! Clean map min=-0.0035561 max=0.052847 Jy/beam ! Writing clean map to FITS file: J2145-0434_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0528472 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000144829 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.822154 0.822154 1.64431 3.28862 6.57723 13.1545 26.3089 52.6179 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.497 x 25.37 at -19.16 degrees (North through East) ! Clean map min=-0.0035561 max=0.052847 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2145-0434_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:07:21 2019