! Started logfile: J2144-3312_S_2017_03_23_pus_uvs.log on Mon May 13 10:09:14 2019 obs J2144-3312_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2144-3312_S_2017_03_23_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.69314 visibilities/baseline/integration-bin. ! Found source: J2144-3312 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 14348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2144-3312_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 186 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 577 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.630396Jy sigma=0.003836 ! Fit after self-cal, rms=0.553342Jy sigma=0.003369 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.657 mas, bmaj=8.182 mas, bpa=2.993 degrees ! Estimated noise=1913.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.344453 Jy ! Component: 100 - total flux cleaned = 0.423107 Jy ! Total flux subtracted in 100 components = 0.423107 Jy ! Clean residual min=-0.021243 max=0.030069 Jy/beam ! Clean residual mean=-0.000201 rms=0.005558 Jy/beam ! Combined flux in latest and established models = 0.423107 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.423107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155463Jy sigma=0.000867 ! Fit after self-cal, rms=0.155459Jy sigma=0.000867 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=9.584 mas, bpa=2.624 degrees ! Estimated noise=1117.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487651 Jy ! Component: 100 - total flux cleaned = 0.0718842 Jy ! Component: 150 - total flux cleaned = 0.0843871 Jy ! Component: 200 - total flux cleaned = 0.0911655 Jy ! Total flux subtracted in 200 components = 0.0911655 Jy ! Clean residual min=-0.014777 max=0.021812 Jy/beam ! Clean residual mean=-0.000308 rms=0.004061 Jy/beam ! Combined flux in latest and established models = 0.514272 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 39 components and 0.514273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140489Jy sigma=0.000769 ! Fit after self-cal, rms=0.140521Jy sigma=0.000769 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.95 HN 1.06 KP 1.05 ! LA 0.98 MK 0.95 NL 1.00* OV 1.03 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 HN 1.11 KP 1.00 ! LA 0.94 MK 0.97 NL 1.13 OV 1.05 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.03 HN 1.11 KP 0.87 ! LA 0.74 MK 1.00 NL 1.26 OV 0.97 ! PT 0.94 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.09 HN 1.03 KP 1.00* ! LA 1.00* MK 1.06 NL 1.00* OV 1.21 ! PT 0.99 SC 1.00 ! ! ! Fit before self-cal, rms=0.140521Jy sigma=0.000769 ! Fit after self-cal, rms=0.125208Jy sigma=0.000676 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=9.612 mas, bpa=2.86 degrees ! Estimated noise=1117.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119787 Jy ! Component: 100 - total flux cleaned = 0.0153475 Jy ! Component: 150 - total flux cleaned = 0.0161725 Jy ! Component: 200 - total flux cleaned = 0.0162871 Jy ! Total flux subtracted in 200 components = 0.0162871 Jy ! Clean residual min=-0.006031 max=0.005661 Jy/beam ! Clean residual mean=-0.000007 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.53056 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 56 components and 0.53056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124082Jy sigma=0.000669 ! Fit after self-cal, rms=0.124076Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124076Jy sigma=0.000668 ! Fit after self-cal, rms=0.123321Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=9.643 mas, bpa=2.811 degrees ! Estimated noise=1114.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155717 Jy ! Component: 100 - total flux cleaned = 0.00239571 Jy ! Component: 150 - total flux cleaned = 0.0025548 Jy ! Component: 200 - total flux cleaned = 0.00268102 Jy ! Total flux subtracted in 200 components = 0.00268102 Jy ! Clean residual min=-0.004297 max=0.003772 Jy/beam ! Clean residual mean=-0.000026 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.533241 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.533241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123123Jy sigma=0.000661 ! Fit after self-cal, rms=0.123105Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101922 Jy ! Component: 100 - total flux cleaned = 0.00102005 Jy ! Component: 150 - total flux cleaned = 0.000966463 Jy ! Component: 200 - total flux cleaned = 0.000968172 Jy ! Total flux subtracted in 200 components = 0.000968172 Jy ! Clean residual min=-0.004063 max=0.003801 Jy/beam ! Clean residual mean=-0.000025 rms=0.000974 Jy/beam ! Combined flux in latest and established models = 0.534209 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.534209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123034Jy sigma=0.000660 ! Fit after self-cal, rms=0.123024Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123024Jy sigma=0.000660 ! Fit after self-cal, rms=0.122727Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=9.653 mas, bpa=2.872 degrees ! Estimated noise=1113.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000338586 Jy ! Component: 100 - total flux cleaned = -0.0002094 Jy ! Component: 150 - total flux cleaned = -0.000158801 Jy ! Component: 200 - total flux cleaned = -0.000157785 Jy ! Total flux subtracted in 200 components = -0.000157785 Jy ! Clean residual min=-0.003722 max=0.003610 Jy/beam ! Clean residual mean=-0.000024 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.534051 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.534051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122654Jy sigma=0.000660 ! Fit after self-cal, rms=0.122640Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562807 Jy ! Component: 100 - total flux cleaned = 0.000524045 Jy ! Component: 150 - total flux cleaned = 0.000484876 Jy ! Component: 200 - total flux cleaned = 0.000484379 Jy ! Total flux subtracted in 200 components = 0.000484379 Jy ! Clean residual min=-0.003596 max=0.003711 Jy/beam ! Clean residual mean=-0.000023 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.534535 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.534535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122602Jy sigma=0.000660 ! Fit after self-cal, rms=0.122599Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122599Jy sigma=0.000660 ! Fit after self-cal, rms=0.122514Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.559 mas, bmaj=22.79 mas, bpa=2.357 degrees ! Estimated noise=1369.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247256 Jy ! Component: 100 - total flux cleaned = 0.00037813 Jy ! Component: 150 - total flux cleaned = 0.000379333 Jy ! Component: 200 - total flux cleaned = 0.000380128 Jy ! Total flux subtracted in 200 components = 0.000380128 Jy ! Clean residual min=-0.003631 max=0.004240 Jy/beam ! Clean residual mean=-0.000037 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.534915 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 115 components and 0.534915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122501Jy sigma=0.000659 ! Fit after self-cal, rms=0.122495Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108212 Jy ! Component: 100 - total flux cleaned = 0.00018569 Jy ! Component: 150 - total flux cleaned = 0.000151924 Jy ! Component: 200 - total flux cleaned = 0.000185709 Jy ! Total flux subtracted in 200 components = 0.000185709 Jy ! Clean residual min=-0.003608 max=0.004206 Jy/beam ! Clean residual mean=-0.000035 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.535101 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 0.535101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122486Jy sigma=0.000659 ! Fit after self-cal, rms=0.122482Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=9.664 mas, bpa=2.918 degrees ! Estimated noise=1113.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 9.664 at 2.918 degrees (North through East) ! Clean map min=-0.0033065 max=0.44599 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=8.341 mas, bpa=2.845 degrees ! Estimated noise=1956.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.351633 Jy ! Component: 100 - total flux cleaned = 0.430376 Jy ! Component: 150 - total flux cleaned = 0.46111 Jy ! Component: 200 - total flux cleaned = 0.478805 Jy ! Total flux subtracted in 200 components = 0.478805 Jy ! Clean residual min=-0.007613 max=0.013135 Jy/beam ! Clean residual mean=-0.000059 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.478805 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.478805 Jy ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=9.664 mas, bpa=2.918 degrees ! Estimated noise=1113.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185092 Jy ! Component: 100 - total flux cleaned = 0.0292353 Jy ! Component: 150 - total flux cleaned = 0.0364858 Jy ! Component: 200 - total flux cleaned = 0.0415449 Jy ! Total flux subtracted in 200 components = 0.0415449 Jy ! Clean residual min=-0.003843 max=0.004987 Jy/beam ! Clean residual mean=-0.000048 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.52035 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 74 components and 0.52035 Jy ! Inverting map ! Added new window around map position (21.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476076 Jy ! Component: 100 - total flux cleaned = 0.00799723 Jy ! Component: 150 - total flux cleaned = 0.0104736 Jy ! Component: 200 - total flux cleaned = 0.0124007 Jy ! Total flux subtracted in 200 components = 0.0124007 Jy ! Clean residual min=-0.003476 max=0.003658 Jy/beam ! Clean residual mean=-0.000017 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.53275 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 105 components and 0.53275 Jy ! Inverting map ! Added new window around map position (-95.5, 88.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00303964 Jy ! Component: 100 - total flux cleaned = 0.00418182 Jy ! Component: 150 - total flux cleaned = 0.00497903 Jy ! Component: 200 - total flux cleaned = 0.00531088 Jy ! Total flux subtracted in 200 components = 0.00531088 Jy ! Clean residual min=-0.003148 max=0.002998 Jy/beam ! Clean residual mean=-0.000022 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.538061 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 134 components and 0.538061 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.559 mas, bmaj=22.79 mas, bpa=2.357 degrees ! Estimated noise=1369.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123258 Jy ! Component: 100 - total flux cleaned = 0.00153444 Jy ! Component: 150 - total flux cleaned = 0.0015776 Jy ! Component: 200 - total flux cleaned = 0.0015378 Jy ! Total flux subtracted in 200 components = 0.0015378 Jy ! Clean residual min=-0.003331 max=0.003125 Jy/beam ! Clean residual mean=-0.000030 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.539599 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.03802e-05 Jy ! Component: 100 - total flux cleaned = -0.000156233 Jy ! Component: 150 - total flux cleaned = -0.000226889 Jy ! Component: 200 - total flux cleaned = -0.000261001 Jy ! Total flux subtracted in 200 components = -0.000261001 Jy ! Clean residual min=-0.003296 max=0.003094 Jy/beam ! Clean residual mean=-0.000028 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.539338 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 163 components and 0.539338 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.265 mas, bmaj=9.664 mas, bpa=2.918 degrees ! Estimated noise=1113.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144115 Jy ! Component: 100 - total flux cleaned = 6.57445e-06 Jy ! Component: 150 - total flux cleaned = 0.000281456 Jy ! Component: 200 - total flux cleaned = 0.000449315 Jy ! Total flux subtracted in 200 components = 0.000449315 Jy ! Clean residual min=-0.002977 max=0.003009 Jy/beam ! Clean residual mean=-0.000016 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.539787 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 189 components and 0.539787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122046Jy sigma=0.000658 ! Fit after self-cal, rms=0.122012Jy sigma=0.000657 wmodel J2144-3312_S_2017_03_23_pus_map.mod ! Writing 189 model components to file: J2144-3312_S_2017_03_23_pus_map.mod wobs J2144-3312_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2144-3312_S_2017_03_23_pus_uvs.fits wwins J2144-3312_S_2017_03_23_pus_map.win ! wwins: Wrote 5 windows to J2144-3312_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000477482 Jy ! Component: 100 - total flux cleaned = 0.000939954 Jy ! Component: 150 - total flux cleaned = 0.0012841 Jy ! Component: 200 - total flux cleaned = 0.00144671 Jy ! Component: 250 - total flux cleaned = 0.00144755 Jy ! Component: 300 - total flux cleaned = 0.00141008 Jy ! Component: 350 - total flux cleaned = 0.00129955 Jy ! Component: 400 - total flux cleaned = 0.00129899 Jy ! Component: 450 - total flux cleaned = 0.00116157 Jy ! Component: 500 - total flux cleaned = 0.00116276 Jy ! Component: 550 - total flux cleaned = 0.00109813 Jy ! Component: 600 - total flux cleaned = 0.00106686 Jy ! Component: 650 - total flux cleaned = 0.00106664 Jy ! Component: 700 - total flux cleaned = 0.000945784 Jy ! Component: 750 - total flux cleaned = 0.000916156 Jy ! Component: 800 - total flux cleaned = 0.000886528 Jy ! Component: 850 - total flux cleaned = 0.00082951 Jy ! Component: 900 - total flux cleaned = 0.000941753 Jy ! Component: 950 - total flux cleaned = 0.000996515 Jy ! Component: 1000 - total flux cleaned = 0.00105063 Jy ! Component: 1050 - total flux cleaned = 0.0011041 Jy ! Component: 1100 - total flux cleaned = 0.00115666 Jy ! Component: 1150 - total flux cleaned = 0.00125943 Jy ! Component: 1200 - total flux cleaned = 0.00131025 Jy ! Component: 1250 - total flux cleaned = 0.00131039 Jy ! Component: 1300 - total flux cleaned = 0.00128565 Jy ! Component: 1350 - total flux cleaned = 0.00128551 Jy ! Component: 1400 - total flux cleaned = 0.00123757 Jy ! Component: 1450 - total flux cleaned = 0.0012141 Jy ! Component: 1500 - total flux cleaned = 0.00119068 Jy ! Component: 1550 - total flux cleaned = 0.00112225 Jy ! Component: 1600 - total flux cleaned = 0.00119051 Jy ! Component: 1650 - total flux cleaned = 0.00121313 Jy ! Component: 1700 - total flux cleaned = 0.00119088 Jy ! Component: 1750 - total flux cleaned = 0.00125624 Jy ! Component: 1800 - total flux cleaned = 0.00116939 Jy ! Component: 1850 - total flux cleaned = 0.00110533 Jy ! Component: 1900 - total flux cleaned = 0.00112639 Jy ! Component: 1950 - total flux cleaned = 0.00112618 Jy ! Component: 2000 - total flux cleaned = 0.00112609 Jy ! Component: 2050 - total flux cleaned = 0.00112614 Jy ! Component: 2100 - total flux cleaned = 0.00116652 Jy ! Component: 2150 - total flux cleaned = 0.00122628 Jy ! Component: 2200 - total flux cleaned = 0.00124591 Jy ! Component: 2250 - total flux cleaned = 0.00132391 Jy ! Component: 2300 - total flux cleaned = 0.00136208 Jy ! Component: 2350 - total flux cleaned = 0.00134254 Jy ! Component: 2400 - total flux cleaned = 0.00138045 Jy ! Component: 2450 - total flux cleaned = 0.00138061 Jy ! Component: 2500 - total flux cleaned = 0.00145507 Jy ! Component: 2550 - total flux cleaned = 0.00145512 Jy ! Component: 2600 - total flux cleaned = 0.00147364 Jy ! Component: 2650 - total flux cleaned = 0.00150999 Jy ! Component: 2700 - total flux cleaned = 0.0015993 Jy ! Component: 2750 - total flux cleaned = 0.00161707 Jy ! Component: 2800 - total flux cleaned = 0.00163464 Jy ! Component: 2850 - total flux cleaned = 0.00172162 Jy ! Component: 2900 - total flux cleaned = 0.00173872 Jy ! Component: 2950 - total flux cleaned = 0.00173902 Jy ! Component: 3000 - total flux cleaned = 0.0017728 Jy ! Component: 3050 - total flux cleaned = 0.00175601 Jy ! Component: 3100 - total flux cleaned = 0.00177249 Jy ! Component: 3150 - total flux cleaned = 0.00180545 Jy ! Component: 3200 - total flux cleaned = 0.00185448 Jy ! Component: 3250 - total flux cleaned = 0.00178975 Jy ! Component: 3300 - total flux cleaned = 0.00177392 Jy ! Component: 3350 - total flux cleaned = 0.00182186 Jy ! Component: 3400 - total flux cleaned = 0.00186924 Jy ! Component: 3450 - total flux cleaned = 0.00188469 Jy ! Component: 3500 - total flux cleaned = 0.001869 Jy ! Component: 3550 - total flux cleaned = 0.00188442 Jy ! Component: 3600 - total flux cleaned = 0.00193062 Jy ! Component: 3650 - total flux cleaned = 0.00193063 Jy ! Component: 3700 - total flux cleaned = 0.00202168 Jy ! Component: 3750 - total flux cleaned = 0.00202161 Jy ! Component: 3800 - total flux cleaned = 0.00208134 Jy ! Component: 3850 - total flux cleaned = 0.00215564 Jy ! Component: 3900 - total flux cleaned = 0.00215558 Jy ! Component: 3950 - total flux cleaned = 0.00227277 Jy ! Component: 4000 - total flux cleaned = 0.00230177 Jy ! Component: 4050 - total flux cleaned = 0.00240291 Jy ! Total flux subtracted in 4096 components = 0.00240287 Jy ! Clean residual min=-0.000784 max=0.000828 Jy/beam ! Clean residual mean=-0.000005 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.54219 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 447 components and 0.54219 Jy ![Exited script file: muppet] wmap "J2144-3312_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 9.664 at 2.918 degrees (North through East) ! Clean map min=-0.0017788 max=0.45016 Jy/beam ! Writing clean map to FITS file: J2144-3312_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.450158 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000267141 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.178032 0.178032 0.356063 0.712126 1.42425 2.84851 5.69701 11.394 22.788 45.5761 91.1522 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.45 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.265 x 9.664 at 2.918 degrees (North through East) ! Clean map min=-0.0017788 max=0.45016 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2144-3312_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:09:20 2019