! Started logfile: J2140-2804_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:57:08 2019 obs J2140-2804_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J2140-2804_S_2017_05_31_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.786901 visibilities/baseline/integration-bin. ! Found source: J2140-2804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 13456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2140-2804_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 156 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.919522Jy sigma=0.006662 ! Fit after self-cal, rms=0.908240Jy sigma=0.006587 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.376 mas, bmaj=6.761 mas, bpa=-7.817 degrees ! Estimated noise=1603.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073618 Jy ! Component: 100 - total flux cleaned = 0.0899851 Jy ! Total flux subtracted in 100 components = 0.0899851 Jy ! Clean residual min=-0.005121 max=0.006210 Jy/beam ! Clean residual mean=-0.000020 rms=0.001236 Jy/beam ! Combined flux in latest and established models = 0.0899851 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0899851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115275Jy sigma=0.000662 ! Fit after self-cal, rms=0.115238Jy sigma=0.000662 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.943 mas, bpa=-7.451 degrees ! Estimated noise=958.846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00709165 Jy ! Component: 100 - total flux cleaned = 0.0105265 Jy ! Component: 150 - total flux cleaned = 0.0123183 Jy ! Component: 200 - total flux cleaned = 0.0132547 Jy ! Total flux subtracted in 200 components = 0.0132547 Jy ! Clean residual min=-0.003105 max=0.002702 Jy/beam ! Clean residual mean=0.000003 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.10324 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.10324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114595Jy sigma=0.000659 ! Fit after self-cal, rms=0.114622Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.92 HN 1.11 KP 1.02 ! LA 0.99 MK 0.96 NL 0.92 OV 1.06 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.21 KP 0.98 ! LA 0.95 MK 1.01 NL 1.08 OV 1.08 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 1.02 HN 1.09 KP 0.96 ! LA 0.98 MK 1.02 NL 1.02 OV 1.02 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.99 KP 0.99 ! LA 0.97 MK 1.05 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.114622Jy sigma=0.000659 ! Fit after self-cal, rms=0.101726Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=7.951 mas, bpa=-7.403 degrees ! Estimated noise=960.618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.20499e-05 Jy ! Component: 100 - total flux cleaned = 3.12419e-05 Jy ! Component: 150 - total flux cleaned = 1.37489e-06 Jy ! Component: 200 - total flux cleaned = -1.21164e-05 Jy ! Total flux subtracted in 200 components = -1.21164e-05 Jy ! Clean residual min=-0.002479 max=0.002398 Jy/beam ! Clean residual mean=0.000011 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.103228 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.103228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101721Jy sigma=0.000656 ! Fit after self-cal, rms=0.101690Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101690Jy sigma=0.000656 ! Fit after self-cal, rms=0.102159Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=7.963 mas, bpa=-7.369 degrees ! Estimated noise=962.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.85993e-05 Jy ! Component: 100 - total flux cleaned = 0.000161525 Jy ! Component: 150 - total flux cleaned = 0.000185501 Jy ! Component: 200 - total flux cleaned = 0.000185866 Jy ! Total flux subtracted in 200 components = 0.000185866 Jy ! Clean residual min=-0.002350 max=0.002131 Jy/beam ! Clean residual mean=0.000005 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.103414 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.103414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102154Jy sigma=0.000655 ! Fit after self-cal, rms=0.102168Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19091e-06 Jy ! Component: 100 - total flux cleaned = -1.34817e-06 Jy ! Component: 150 - total flux cleaned = -1.55875e-06 Jy ! Component: 200 - total flux cleaned = -1.92104e-05 Jy ! Total flux subtracted in 200 components = -1.92104e-05 Jy ! Clean residual min=-0.002344 max=0.002104 Jy/beam ! Clean residual mean=0.000005 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.103394 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.103394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102166Jy sigma=0.000655 ! Fit after self-cal, rms=0.102163Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102163Jy sigma=0.000655 ! Fit after self-cal, rms=0.102631Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.978 mas, bpa=-7.372 degrees ! Estimated noise=964.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.2104e-05 Jy ! Component: 100 - total flux cleaned = 6.06396e-05 Jy ! Component: 150 - total flux cleaned = 7.95631e-05 Jy ! Component: 200 - total flux cleaned = 9.54279e-05 Jy ! Total flux subtracted in 200 components = 9.54279e-05 Jy ! Clean residual min=-0.002203 max=0.002028 Jy/beam ! Clean residual mean=0.000001 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.10349 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.10349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102628Jy sigma=0.000655 ! Fit after self-cal, rms=0.102638Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.57465e-06 Jy ! Component: 100 - total flux cleaned = -5.4118e-06 Jy ! Component: 150 - total flux cleaned = 9.49738e-06 Jy ! Component: 200 - total flux cleaned = 9.42527e-06 Jy ! Total flux subtracted in 200 components = 9.42527e-06 Jy ! Clean residual min=-0.002199 max=0.002036 Jy/beam ! Clean residual mean=0.000001 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.103499 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.103499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102637Jy sigma=0.000655 ! Fit after self-cal, rms=0.102635Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102635Jy sigma=0.000655 ! Fit after self-cal, rms=0.102901Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.307 mas, bmaj=21.6 mas, bpa=-4.188 degrees ! Estimated noise=1243.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.3859e-05 Jy ! Component: 100 - total flux cleaned = 7.20972e-05 Jy ! Component: 150 - total flux cleaned = 7.12944e-05 Jy ! Component: 200 - total flux cleaned = 7.07936e-05 Jy ! Total flux subtracted in 200 components = 7.07936e-05 Jy ! Clean residual min=-0.002479 max=0.001946 Jy/beam ! Clean residual mean=0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.10357 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.10357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102900Jy sigma=0.000655 ! Fit after self-cal, rms=0.102896Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.22212e-05 Jy ! Component: 100 - total flux cleaned = 2.18283e-05 Jy ! Component: 150 - total flux cleaned = 2.14769e-05 Jy ! Component: 200 - total flux cleaned = 2.11237e-05 Jy ! Total flux subtracted in 200 components = 2.11237e-05 Jy ! Clean residual min=-0.002473 max=0.001938 Jy/beam ! Clean residual mean=0.000002 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.103591 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.103591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102897Jy sigma=0.000655 ! Fit after self-cal, rms=0.102893Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.987 mas, bpa=-7.399 degrees ! Estimated noise=967.034 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.994 x 7.987 at -7.399 degrees (North through East) ! Clean map min=-0.002067 max=0.093392 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=6.777 mas, bpa=-7.863 degrees ! Estimated noise=1610.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.073786 Jy ! Component: 100 - total flux cleaned = 0.0903069 Jy ! Component: 150 - total flux cleaned = 0.0962133 Jy ! Component: 200 - total flux cleaned = 0.0991635 Jy ! Total flux subtracted in 200 components = 0.0991635 Jy ! Clean residual min=-0.004048 max=0.003794 Jy/beam ! Clean residual mean=-0.000008 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.0991636 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0991636 Jy ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.987 mas, bpa=-7.399 degrees ! Estimated noise=967.034 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316256 Jy ! Component: 100 - total flux cleaned = 0.00408712 Jy ! Component: 150 - total flux cleaned = 0.004333 Jy ! Component: 200 - total flux cleaned = 0.00440249 Jy ! Total flux subtracted in 200 components = 0.00440249 Jy ! Clean residual min=-0.002287 max=0.001920 Jy/beam ! Clean residual mean=-0.000000 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.103566 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.103566 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.307 mas, bmaj=21.6 mas, bpa=-4.188 degrees ! Estimated noise=1243.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206369 Jy ! Component: 100 - total flux cleaned = 0.000235249 Jy ! Component: 150 - total flux cleaned = 0.000256893 Jy ! Component: 200 - total flux cleaned = 0.000256847 Jy ! Total flux subtracted in 200 components = 0.000256847 Jy ! Clean residual min=-0.002502 max=0.001778 Jy/beam ! Clean residual mean=0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.103823 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40587e-05 Jy ! Component: 100 - total flux cleaned = 2.02241e-05 Jy ! Component: 150 - total flux cleaned = 2.58244e-05 Jy ! Component: 200 - total flux cleaned = 1.99156e-05 Jy ! Total flux subtracted in 200 components = 1.99156e-05 Jy ! Clean residual min=-0.002492 max=0.001789 Jy/beam ! Clean residual mean=0.000002 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.103843 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.103843 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=7.987 mas, bpa=-7.399 degrees ! Estimated noise=967.034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018769 Jy ! Component: 100 - total flux cleaned = -0.000166052 Jy ! Component: 150 - total flux cleaned = -0.000146904 Jy ! Component: 200 - total flux cleaned = -0.000128074 Jy ! Total flux subtracted in 200 components = -0.000128074 Jy ! Clean residual min=-0.002199 max=0.001909 Jy/beam ! Clean residual mean=0.000000 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.103715 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 61 components and 0.103715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102873Jy sigma=0.000655 ! Fit after self-cal, rms=0.102858Jy sigma=0.000655 wmodel J2140-2804_S_2017_05_31_pus_map.mod ! Writing 61 model components to file: J2140-2804_S_2017_05_31_pus_map.mod wobs J2140-2804_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J2140-2804_S_2017_05_31_pus_uvs.fits wwins J2140-2804_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J2140-2804_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000955957 Jy ! Component: 100 - total flux cleaned = -0.00128309 Jy ! Component: 150 - total flux cleaned = -0.00145408 Jy ! Component: 200 - total flux cleaned = -0.00158582 Jy ! Component: 250 - total flux cleaned = -0.00177445 Jy ! Component: 300 - total flux cleaned = -0.00195675 Jy ! Component: 350 - total flux cleaned = -0.00210404 Jy ! Component: 400 - total flux cleaned = -0.00218962 Jy ! Component: 450 - total flux cleaned = -0.00218924 Jy ! Component: 500 - total flux cleaned = -0.00221654 Jy ! Component: 550 - total flux cleaned = -0.00229611 Jy ! Component: 600 - total flux cleaned = -0.00232211 Jy ! Component: 650 - total flux cleaned = -0.00229668 Jy ! Component: 700 - total flux cleaned = -0.00227166 Jy ! Component: 750 - total flux cleaned = -0.00224708 Jy ! Component: 800 - total flux cleaned = -0.00219956 Jy ! Component: 850 - total flux cleaned = -0.00215244 Jy ! Component: 900 - total flux cleaned = -0.00206003 Jy ! Component: 950 - total flux cleaned = -0.00196901 Jy ! Component: 1000 - total flux cleaned = -0.00188009 Jy ! Component: 1050 - total flux cleaned = -0.00181448 Jy ! Component: 1100 - total flux cleaned = -0.00170619 Jy ! Component: 1150 - total flux cleaned = -0.00164213 Jy ! Component: 1200 - total flux cleaned = -0.00151628 Jy ! Component: 1250 - total flux cleaned = -0.00143329 Jy ! Component: 1300 - total flux cleaned = -0.00135183 Jy ! Component: 1350 - total flux cleaned = -0.00129146 Jy ! Component: 1400 - total flux cleaned = -0.00119257 Jy ! Component: 1450 - total flux cleaned = -0.00117315 Jy ! Component: 1500 - total flux cleaned = -0.00115341 Jy ! Component: 1550 - total flux cleaned = -0.00103915 Jy ! Component: 1600 - total flux cleaned = -0.00100155 Jy ! Component: 1650 - total flux cleaned = -0.000890611 Jy ! Component: 1700 - total flux cleaned = -0.000799174 Jy ! Component: 1750 - total flux cleaned = -0.000709174 Jy ! Component: 1800 - total flux cleaned = -0.0006736 Jy ! Component: 1850 - total flux cleaned = -0.000585498 Jy ! Component: 1900 - total flux cleaned = -0.000480975 Jy ! Component: 1950 - total flux cleaned = -0.000412197 Jy ! Component: 2000 - total flux cleaned = -0.000293113 Jy ! Component: 2050 - total flux cleaned = -0.000192047 Jy ! Component: 2100 - total flux cleaned = -7.58973e-05 Jy ! Component: 2150 - total flux cleaned = -4.30801e-05 Jy ! Component: 2200 - total flux cleaned = 2.20455e-05 Jy ! Component: 2250 - total flux cleaned = 2.19963e-05 Jy ! Component: 2300 - total flux cleaned = 5.42726e-05 Jy ! Component: 2350 - total flux cleaned = 8.58749e-05 Jy ! Component: 2400 - total flux cleaned = 0.000101387 Jy ! Component: 2450 - total flux cleaned = 0.000147697 Jy ! Component: 2500 - total flux cleaned = 0.000147485 Jy ! Component: 2550 - total flux cleaned = 0.000132228 Jy ! Component: 2600 - total flux cleaned = 0.000132318 Jy ! Component: 2650 - total flux cleaned = 0.000102452 Jy ! Component: 2700 - total flux cleaned = 0.000102666 Jy ! Component: 2750 - total flux cleaned = 0.000102709 Jy ! Component: 2800 - total flux cleaned = 8.80402e-05 Jy ! Component: 2850 - total flux cleaned = 4.48028e-05 Jy ! Component: 2900 - total flux cleaned = 4.47503e-05 Jy ! Component: 2950 - total flux cleaned = 1.63683e-05 Jy ! Component: 3000 - total flux cleaned = 3.05447e-05 Jy ! Component: 3050 - total flux cleaned = 1.65938e-05 Jy ! Component: 3100 - total flux cleaned = 1.66437e-05 Jy ! Component: 3150 - total flux cleaned = 1.65951e-05 Jy ! Component: 3200 - total flux cleaned = 1.65756e-05 Jy ! Component: 3250 - total flux cleaned = -1.04891e-05 Jy ! Component: 3300 - total flux cleaned = -5.072e-05 Jy ! Component: 3350 - total flux cleaned = 2.56914e-06 Jy ! Component: 3400 - total flux cleaned = -7.67994e-05 Jy ! Component: 3450 - total flux cleaned = -5.04963e-05 Jy ! Component: 3500 - total flux cleaned = -3.75654e-05 Jy ! Component: 3550 - total flux cleaned = -3.77258e-05 Jy ! Component: 3600 - total flux cleaned = -7.61344e-05 Jy ! Component: 3650 - total flux cleaned = -6.32712e-05 Jy ! Component: 3700 - total flux cleaned = -7.57938e-05 Jy ! Component: 3750 - total flux cleaned = -5.04505e-05 Jy ! Component: 3800 - total flux cleaned = -5.04519e-05 Jy ! Component: 3850 - total flux cleaned = -6.04707e-07 Jy ! Component: 3900 - total flux cleaned = -1.29667e-05 Jy ! Component: 3950 - total flux cleaned = -1.28867e-05 Jy ! Component: 4000 - total flux cleaned = -5.58854e-07 Jy ! Component: 4050 - total flux cleaned = 4.79728e-05 Jy ! Total flux subtracted in 4096 components = 6.01008e-05 Jy ! Clean residual min=-0.000757 max=0.000803 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.103775 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 327 components and 0.103775 Jy ![Exited script file: muppet] wmap "J2140-2804_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.994 x 7.987 at -7.399 degrees (North through East) ! Clean map min=-0.0014683 max=0.093663 Jy/beam ! Writing clean map to FITS file: J2140-2804_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0936635 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209121 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.669804 0.669804 1.33961 2.67922 5.35843 10.7169 21.4337 42.8675 85.7349 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.093 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.994 x 7.987 at -7.399 degrees (North through East) ! Clean map min=-0.0014683 max=0.093663 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2140-2804_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:57:13 2019