! Started logfile: J2139+0122_S_2017_06_15_pus_uvs.log on Tue May 7 15:28:41 2019 obs J2139+0122_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2139+0122_S_2017_06_15_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.960107 visibilities/baseline/integration-bin. ! Found source: J2139+0122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 14344 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2139+0122_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 551 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943162Jy sigma=0.008674 ! Fit after self-cal, rms=0.927354Jy sigma=0.008547 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=7.377 mas, bpa=-5.963 degrees ! Estimated noise=999.547 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567945 Jy ! Component: 100 - total flux cleaned = 0.0704802 Jy ! Total flux subtracted in 100 components = 0.0704802 Jy ! Clean residual min=-0.003608 max=0.005540 Jy/beam ! Clean residual mean=0.000001 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.0704802 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0704802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078396Jy sigma=0.000672 ! Fit after self-cal, rms=0.078313Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=8.041 mas, bpa=-4.016 degrees ! Estimated noise=770.538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785391 Jy ! Component: 100 - total flux cleaned = 0.011501 Jy ! Component: 150 - total flux cleaned = 0.0135204 Jy ! Component: 200 - total flux cleaned = 0.0147222 Jy ! Total flux subtracted in 200 components = 0.0147222 Jy ! Clean residual min=-0.003103 max=0.002811 Jy/beam ! Clean residual mean=-0.000002 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0852024 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 49 components and 0.0852023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077619Jy sigma=0.000665 ! Fit after self-cal, rms=0.077640Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.89 HN 1.12 KP 1.05 ! LA 0.98 MK 1.10 NL 0.87 OV 0.99 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.23 FD 0.91 HN 0.99 KP 0.96 ! LA 0.97 MK 1.00 NL 1.06 OV 1.07 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.01 KP 0.99 ! LA 1.01 MK 1.08 NL 1.02 OV 0.89 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.93 KP 1.00* ! LA 1.41 MK 0.86 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.077640Jy sigma=0.000664 ! Fit after self-cal, rms=0.079066Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.243 mas, bmaj=8.135 mas, bpa=-3.818 degrees ! Estimated noise=773.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000289877 Jy ! Component: 100 - total flux cleaned = -0.000330622 Jy ! Component: 150 - total flux cleaned = -0.000365004 Jy ! Component: 200 - total flux cleaned = -0.00038097 Jy ! Total flux subtracted in 200 components = -0.00038097 Jy ! Clean residual min=-0.002689 max=0.002658 Jy/beam ! Clean residual mean=0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0848214 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.0848214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079056Jy sigma=0.000661 ! Fit after self-cal, rms=0.079128Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079128Jy sigma=0.000661 ! Fit after self-cal, rms=0.084576Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=8.137 mas, bpa=-3.672 degrees ! Estimated noise=776.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000309527 Jy ! Component: 100 - total flux cleaned = 0.000329512 Jy ! Component: 150 - total flux cleaned = 0.000346268 Jy ! Component: 200 - total flux cleaned = 0.000346366 Jy ! Total flux subtracted in 200 components = 0.000346366 Jy ! Clean residual min=-0.001797 max=0.001940 Jy/beam ! Clean residual mean=0.000000 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0851677 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0851677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084569Jy sigma=0.000655 ! Fit after self-cal, rms=0.084760Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18075e-05 Jy ! Component: 100 - total flux cleaned = -1.12383e-05 Jy ! Component: 150 - total flux cleaned = -2.55361e-05 Jy ! Component: 200 - total flux cleaned = -3.9106e-05 Jy ! Total flux subtracted in 200 components = -3.9106e-05 Jy ! Clean residual min=-0.001781 max=0.001924 Jy/beam ! Clean residual mean=0.000000 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0851286 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.0851286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084756Jy sigma=0.000655 ! Fit after self-cal, rms=0.084758Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084758Jy sigma=0.000655 ! Fit after self-cal, rms=0.086913Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=8.13 mas, bpa=-3.614 degrees ! Estimated noise=777.296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00025481 Jy ! Component: 100 - total flux cleaned = 0.000254972 Jy ! Component: 150 - total flux cleaned = 0.00024209 Jy ! Component: 200 - total flux cleaned = 0.000242319 Jy ! Total flux subtracted in 200 components = 0.000242319 Jy ! Clean residual min=-0.001769 max=0.001854 Jy/beam ! Clean residual mean=-0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0853709 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0853709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086908Jy sigma=0.000654 ! Fit after self-cal, rms=0.086937Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.10754e-05 Jy ! Component: 100 - total flux cleaned = -1.10173e-05 Jy ! Component: 150 - total flux cleaned = -2.25335e-05 Jy ! Component: 200 - total flux cleaned = -3.35357e-05 Jy ! Total flux subtracted in 200 components = -3.35357e-05 Jy ! Clean residual min=-0.001759 max=0.001828 Jy/beam ! Clean residual mean=-0.000000 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.0853374 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.0853374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086933Jy sigma=0.000654 ! Fit after self-cal, rms=0.086935Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086935Jy sigma=0.000654 ! Fit after self-cal, rms=0.087155Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=12.95 mas, bpa=-1.042 degrees ! Estimated noise=962.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494016 Jy ! Component: 100 - total flux cleaned = 0.000494254 Jy ! Component: 150 - total flux cleaned = 0.000475634 Jy ! Component: 200 - total flux cleaned = 0.000459645 Jy ! Total flux subtracted in 200 components = 0.000459645 Jy ! Clean residual min=-0.001674 max=0.002020 Jy/beam ! Clean residual mean=-0.000001 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.085797 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 79 components and 0.085797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087155Jy sigma=0.000654 ! Fit after self-cal, rms=0.087155Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103239 Jy ! Component: 100 - total flux cleaned = 9.24573e-05 Jy ! Component: 150 - total flux cleaned = 7.51111e-05 Jy ! Component: 200 - total flux cleaned = 6.03917e-05 Jy ! Total flux subtracted in 200 components = 6.03917e-05 Jy ! Clean residual min=-0.001655 max=0.001998 Jy/beam ! Clean residual mean=-0.000001 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0858574 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.0858574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087157Jy sigma=0.000654 ! Fit after self-cal, rms=0.087154Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.12 mas, bpa=-3.541 degrees ! Estimated noise=777.914 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 8.12 at -3.541 degrees (North through East) ! Clean map min=-0.0017017 max=0.075134 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=7.436 mas, bpa=-5.631 degrees ! Estimated noise=1020.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576517 Jy ! Component: 100 - total flux cleaned = 0.0719459 Jy ! Component: 150 - total flux cleaned = 0.0782335 Jy ! Component: 200 - total flux cleaned = 0.0813881 Jy ! Total flux subtracted in 200 components = 0.0813881 Jy ! Clean residual min=-0.002484 max=0.002732 Jy/beam ! Clean residual mean=0.000000 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.081388 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.081388 Jy ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.12 mas, bpa=-3.541 degrees ! Estimated noise=777.914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260135 Jy ! Component: 100 - total flux cleaned = 0.00398889 Jy ! Component: 150 - total flux cleaned = 0.00451882 Jy ! Component: 200 - total flux cleaned = 0.0048193 Jy ! Total flux subtracted in 200 components = 0.0048193 Jy ! Clean residual min=-0.001696 max=0.001798 Jy/beam ! Clean residual mean=0.000000 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0862073 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 44 components and 0.0862073 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.588 mas, bmaj=12.95 mas, bpa=-1.042 degrees ! Estimated noise=962.559 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000743725 Jy ! Component: 100 - total flux cleaned = 0.000882687 Jy ! Component: 150 - total flux cleaned = 0.000938005 Jy ! Component: 200 - total flux cleaned = 0.00100016 Jy ! Total flux subtracted in 200 components = 0.00100016 Jy ! Clean residual min=-0.001641 max=0.001761 Jy/beam ! Clean residual mean=0.000000 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0872075 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.5537e-05 Jy ! Component: 100 - total flux cleaned = 8.73199e-05 Jy ! Component: 150 - total flux cleaned = 0.000126026 Jy ! Component: 200 - total flux cleaned = 0.000161788 Jy ! Total flux subtracted in 200 components = 0.000161788 Jy ! Clean residual min=-0.001636 max=0.001759 Jy/beam ! Clean residual mean=0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0873693 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 0.0873693 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=8.12 mas, bpa=-3.541 degrees ! Estimated noise=777.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00010293 Jy ! Component: 100 - total flux cleaned = -4.30572e-05 Jy ! Component: 150 - total flux cleaned = -4.36554e-05 Jy ! Component: 200 - total flux cleaned = -4.34311e-05 Jy ! Total flux subtracted in 200 components = -4.34311e-05 Jy ! Clean residual min=-0.001696 max=0.001731 Jy/beam ! Clean residual mean=0.000000 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0873259 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 91 components and 0.0873259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087134Jy sigma=0.000654 ! Fit after self-cal, rms=0.087131Jy sigma=0.000654 wmodel J2139+0122_S_2017_06_15_pus_map.mod ! Writing 91 model components to file: J2139+0122_S_2017_06_15_pus_map.mod wobs J2139+0122_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2139+0122_S_2017_06_15_pus_uvs.fits wwins J2139+0122_S_2017_06_15_pus_map.win ! wwins: Wrote 2 windows to J2139+0122_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.96895e-05 Jy ! Component: 100 - total flux cleaned = -9.0802e-05 Jy ! Component: 150 - total flux cleaned = 4.81057e-05 Jy ! Component: 200 - total flux cleaned = 0.000182763 Jy ! Component: 250 - total flux cleaned = 0.000234607 Jy ! Component: 300 - total flux cleaned = 0.000259961 Jy ! Component: 350 - total flux cleaned = 0.000309999 Jy ! Component: 400 - total flux cleaned = 0.00038318 Jy ! Component: 450 - total flux cleaned = 0.000455465 Jy ! Component: 500 - total flux cleaned = 0.00043237 Jy ! Component: 550 - total flux cleaned = 0.000409442 Jy ! Component: 600 - total flux cleaned = 0.000432653 Jy ! Component: 650 - total flux cleaned = 0.000409789 Jy ! Component: 700 - total flux cleaned = 0.000365554 Jy ! Component: 750 - total flux cleaned = 0.000278504 Jy ! Component: 800 - total flux cleaned = 0.000235941 Jy ! Component: 850 - total flux cleaned = 0.000277944 Jy ! Component: 900 - total flux cleaned = 0.00021464 Jy ! Component: 950 - total flux cleaned = 0.000131799 Jy ! Component: 1000 - total flux cleaned = 9.08744e-05 Jy ! Component: 1050 - total flux cleaned = 9.06025e-05 Jy ! Component: 1100 - total flux cleaned = 3.019e-05 Jy ! Component: 1150 - total flux cleaned = -9.81171e-06 Jy ! Component: 1200 - total flux cleaned = -0.000107564 Jy ! Component: 1250 - total flux cleaned = -4.9141e-05 Jy ! Component: 1300 - total flux cleaned = -0.000183651 Jy ! Component: 1350 - total flux cleaned = -0.00022132 Jy ! Component: 1400 - total flux cleaned = -0.000202288 Jy ! Component: 1450 - total flux cleaned = -0.000258523 Jy ! Component: 1500 - total flux cleaned = -0.000332578 Jy ! Component: 1550 - total flux cleaned = -0.000350845 Jy ! Component: 1600 - total flux cleaned = -0.000387349 Jy ! Component: 1650 - total flux cleaned = -0.000423094 Jy ! Component: 1700 - total flux cleaned = -0.000476493 Jy ! Component: 1750 - total flux cleaned = -0.000529669 Jy ! Component: 1800 - total flux cleaned = -0.00058228 Jy ! Component: 1850 - total flux cleaned = -0.000686377 Jy ! Component: 1900 - total flux cleaned = -0.000720738 Jy ! Component: 1950 - total flux cleaned = -0.000805962 Jy ! Component: 2000 - total flux cleaned = -0.000822881 Jy ! Component: 2050 - total flux cleaned = -0.000822863 Jy ! Component: 2100 - total flux cleaned = -0.000906275 Jy ! Component: 2150 - total flux cleaned = -0.000922703 Jy ! Component: 2200 - total flux cleaned = -0.00102118 Jy ! Component: 2250 - total flux cleaned = -0.00103725 Jy ! Component: 2300 - total flux cleaned = -0.00106931 Jy ! Component: 2350 - total flux cleaned = -0.00106931 Jy ! Component: 2400 - total flux cleaned = -0.00116463 Jy ! Component: 2450 - total flux cleaned = -0.00113313 Jy ! Component: 2500 - total flux cleaned = -0.00113323 Jy ! Component: 2550 - total flux cleaned = -0.00116454 Jy ! Component: 2600 - total flux cleaned = -0.00121089 Jy ! Component: 2650 - total flux cleaned = -0.00116476 Jy ! Component: 2700 - total flux cleaned = -0.00116481 Jy ! Component: 2750 - total flux cleaned = -0.00117985 Jy ! Component: 2800 - total flux cleaned = -0.00110478 Jy ! Component: 2850 - total flux cleaned = -0.0011643 Jy ! Component: 2900 - total flux cleaned = -0.00110511 Jy ! Component: 2950 - total flux cleaned = -0.00111975 Jy ! Component: 3000 - total flux cleaned = -0.00110526 Jy ! Component: 3050 - total flux cleaned = -0.00106171 Jy ! Component: 3100 - total flux cleaned = -0.00106181 Jy ! Component: 3150 - total flux cleaned = -0.00107602 Jy ! Component: 3200 - total flux cleaned = -0.00104742 Jy ! Component: 3250 - total flux cleaned = -0.00111795 Jy ! Component: 3300 - total flux cleaned = -0.00107576 Jy ! Component: 3350 - total flux cleaned = -0.00102005 Jy ! Component: 3400 - total flux cleaned = -0.00102001 Jy ! Component: 3450 - total flux cleaned = -0.00100634 Jy ! Component: 3500 - total flux cleaned = -0.00102009 Jy ! Component: 3550 - total flux cleaned = -0.000965905 Jy ! Component: 3600 - total flux cleaned = -0.000965835 Jy ! Component: 3650 - total flux cleaned = -0.00092558 Jy ! Component: 3700 - total flux cleaned = -0.000912188 Jy ! Component: 3750 - total flux cleaned = -0.00088558 Jy ! Component: 3800 - total flux cleaned = -0.00092514 Jy ! Component: 3850 - total flux cleaned = -0.000898779 Jy ! Component: 3900 - total flux cleaned = -0.000911791 Jy ! Component: 3950 - total flux cleaned = -0.000808347 Jy ! Component: 4000 - total flux cleaned = -0.000859785 Jy ! Component: 4050 - total flux cleaned = -0.000795749 Jy ! Total flux subtracted in 4096 components = -0.000808539 Jy ! Clean residual min=-0.000705 max=0.000723 Jy/beam ! Clean residual mean=-0.000001 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0865173 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 375 components and 0.0865174 Jy ![Exited script file: muppet] wmap "J2139+0122_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 8.12 at -3.541 degrees (North through East) ! Clean map min=-0.0012659 max=0.075461 Jy/beam ! Writing clean map to FITS file: J2139+0122_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0754609 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000233007 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.926336 0.926336 1.85267 3.70534 7.41069 14.8214 29.6427 59.2855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.238 x 8.12 at -3.541 degrees (North through East) ! Clean map min=-0.0012659 max=0.075461 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2139+0122_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:28:45 2019