! Started logfile: J2138-1810_S_2017_08_12_pus_uvs.log on Fri May 10 15:08:41 2019 obs J2138-1810_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2138-1810_S_2017_08_12_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.535031 visibilities/baseline/integration-bin. ! Found source: J2138-1810 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13868 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2138-1810_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 370 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 513 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 513 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1440 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.925550Jy sigma=0.006814 ! Fit after self-cal, rms=0.896631Jy sigma=0.006608 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=10.54 mas, bpa=18.12 degrees ! Estimated noise=1304.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939853 Jy ! Component: 100 - total flux cleaned = 0.146009 Jy ! Total flux subtracted in 100 components = 0.146009 Jy ! Clean residual min=-0.027085 max=0.036776 Jy/beam ! Clean residual mean=0.000096 rms=0.012276 Jy/beam ! Combined flux in latest and established models = 0.146009 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 50 components and 0.146009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185259Jy sigma=0.001471 ! Fit after self-cal, rms=0.184383Jy sigma=0.001466 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=10.88 mas, bpa=15.02 degrees ! Estimated noise=1042.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0563105 Jy ! Component: 100 - total flux cleaned = 0.0938799 Jy ! Component: 150 - total flux cleaned = 0.120703 Jy ! Component: 200 - total flux cleaned = 0.140222 Jy ! Total flux subtracted in 200 components = 0.140222 Jy ! Clean residual min=-0.036070 max=0.053002 Jy/beam ! Clean residual mean=-0.000022 rms=0.016730 Jy/beam ! Combined flux in latest and established models = 0.286231 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 109 components and 0.286231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165195Jy sigma=0.001298 ! Fit after self-cal, rms=0.163875Jy sigma=0.001290 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 1.00* HN 0.92 KP 1.14 ! LA 0.76 MK 1.00* NL 1.92 OV 2.02 ! PT 0.48 SC 1.13 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 1.06 ! LA 0.73 MK 1.00* NL 2.21 OV 2.15 ! PT 0.47 SC 1.23 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.87 KP 1.07 ! LA 0.74 MK 1.00* NL 2.04 OV 2.08 ! PT 0.47 SC 1.21 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.163875Jy sigma=0.001290 ! Fit after self-cal, rms=0.271047Jy sigma=0.001014 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=11.19 mas, bpa=12.48 degrees ! Estimated noise=1173.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110015 Jy ! Component: 100 - total flux cleaned = 0.012453 Jy ! Component: 150 - total flux cleaned = 0.0126516 Jy ! Component: 200 - total flux cleaned = 0.0126413 Jy ! Total flux subtracted in 200 components = 0.0126413 Jy ! Clean residual min=-0.031244 max=0.050672 Jy/beam ! Clean residual mean=-0.000195 rms=0.012592 Jy/beam ! Combined flux in latest and established models = 0.298872 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 114 components and 0.298872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268792Jy sigma=0.001018 ! Fit after self-cal, rms=0.275157Jy sigma=0.000999 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.275157Jy sigma=0.000999 ! Fit after self-cal, rms=0.327962Jy sigma=0.000978 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.758 mas, bmaj=11.28 mas, bpa=11.88 degrees ! Estimated noise=1223.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137095 Jy ! Component: 100 - total flux cleaned = 0.0164684 Jy ! Component: 150 - total flux cleaned = 0.0168356 Jy ! Component: 200 - total flux cleaned = 0.0168383 Jy ! Total flux subtracted in 200 components = 0.0168383 Jy ! Clean residual min=-0.027116 max=0.043374 Jy/beam ! Clean residual mean=-0.000220 rms=0.012182 Jy/beam ! Combined flux in latest and established models = 0.31571 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 0.31571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325084Jy sigma=0.000984 ! Fit after self-cal, rms=0.327880Jy sigma=0.000974 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305724 Jy ! Component: 100 - total flux cleaned = 0.00258923 Jy ! Component: 150 - total flux cleaned = 0.00226724 Jy ! Component: 200 - total flux cleaned = 0.00170698 Jy ! Total flux subtracted in 200 components = 0.00170698 Jy ! Clean residual min=-0.026182 max=0.042860 Jy/beam ! Clean residual mean=-0.000221 rms=0.012174 Jy/beam ! Combined flux in latest and established models = 0.317417 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 140 components and 0.317417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326356Jy sigma=0.000977 ! Fit after self-cal, rms=0.327372Jy sigma=0.000974 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.327372Jy sigma=0.000974 ! Fit after self-cal, rms=0.364959Jy sigma=0.000967 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=11.45 mas, bpa=12.85 degrees ! Estimated noise=1290.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144363 Jy ! Component: 100 - total flux cleaned = 0.0170324 Jy ! Component: 150 - total flux cleaned = 0.017226 Jy ! Component: 200 - total flux cleaned = 0.0170876 Jy ! Total flux subtracted in 200 components = 0.0170876 Jy ! Clean residual min=-0.027194 max=0.043799 Jy/beam ! Clean residual mean=-0.000230 rms=0.012730 Jy/beam ! Combined flux in latest and established models = 0.334505 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 147 components and 0.334505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.362143Jy sigma=0.000974 ! Fit after self-cal, rms=0.364675Jy sigma=0.000970 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317062 Jy ! Component: 100 - total flux cleaned = 0.00270881 Jy ! Component: 150 - total flux cleaned = 0.00183685 Jy ! Component: 200 - total flux cleaned = 0.00100745 Jy ! Total flux subtracted in 200 components = 0.00100745 Jy ! Clean residual min=-0.027538 max=0.043356 Jy/beam ! Clean residual mean=-0.000231 rms=0.012721 Jy/beam ! Combined flux in latest and established models = 0.335512 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 161 components and 0.335512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.363315Jy sigma=0.000973 ! Fit after self-cal, rms=0.364348Jy sigma=0.000970 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364348Jy sigma=0.000970 ! Fit after self-cal, rms=0.391058Jy sigma=0.000964 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.562 mas, bmaj=17.43 mas, bpa=0.4886 degrees ! Estimated noise=1614.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0202974 Jy ! Component: 100 - total flux cleaned = 0.021885 Jy ! Component: 150 - total flux cleaned = 0.0231146 Jy ! Component: 200 - total flux cleaned = 0.0236211 Jy ! Total flux subtracted in 200 components = 0.0236211 Jy ! Clean residual min=-0.049838 max=0.074836 Jy/beam ! Clean residual mean=-0.000468 rms=0.024746 Jy/beam ! Combined flux in latest and established models = 0.359134 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 162 components and 0.359134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387759Jy sigma=0.000980 ! Fit after self-cal, rms=0.389405Jy sigma=0.000969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251151 Jy ! Component: 100 - total flux cleaned = 0.00217657 Jy ! Component: 150 - total flux cleaned = 0.00137571 Jy ! Component: 200 - total flux cleaned = 0.000953027 Jy ! Total flux subtracted in 200 components = 0.000953027 Jy ! Clean residual min=-0.048860 max=0.075754 Jy/beam ! Clean residual mean=-0.000475 rms=0.024737 Jy/beam ! Combined flux in latest and established models = 0.360087 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 171 components and 0.360087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387730Jy sigma=0.000978 ! Fit after self-cal, rms=0.389020Jy sigma=0.000975 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=11.59 mas, bpa=14.15 degrees ! Estimated noise=1394.48 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 11.59 at 14.15 degrees (North through East) ! Clean map min=-0.029416 max=0.15165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=11.07 mas, bpa=16.96 degrees ! Estimated noise=1692.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123138 Jy ! Component: 100 - total flux cleaned = 0.194724 Jy ! Component: 150 - total flux cleaned = 0.242933 Jy ! Component: 200 - total flux cleaned = 0.277981 Jy ! Total flux subtracted in 200 components = 0.277981 Jy ! Clean residual min=-0.033609 max=0.039927 Jy/beam ! Clean residual mean=-0.000103 rms=0.012689 Jy/beam ! Combined flux in latest and established models = 0.277981 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.277981 Jy ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=11.59 mas, bpa=14.15 degrees ! Estimated noise=1394.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287241 Jy ! Component: 100 - total flux cleaned = 0.0467824 Jy ! Component: 150 - total flux cleaned = 0.0582643 Jy ! Component: 200 - total flux cleaned = 0.0651339 Jy ! Total flux subtracted in 200 components = 0.0651339 Jy ! Clean residual min=-0.032012 max=0.045464 Jy/beam ! Clean residual mean=-0.000230 rms=0.013720 Jy/beam ! Combined flux in latest and established models = 0.343115 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.343115 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.562 mas, bmaj=17.43 mas, bpa=0.4886 degrees ! Estimated noise=1614.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108517 Jy ! Component: 100 - total flux cleaned = 0.0123423 Jy ! Component: 150 - total flux cleaned = 0.0135101 Jy ! Component: 200 - total flux cleaned = 0.0144757 Jy ! Total flux subtracted in 200 components = 0.0144757 Jy ! Clean residual min=-0.049534 max=0.075872 Jy/beam ! Clean residual mean=-0.000468 rms=0.024743 Jy/beam ! Combined flux in latest and established models = 0.35759 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000810933 Jy ! Component: 100 - total flux cleaned = 0.000993246 Jy ! Component: 150 - total flux cleaned = 0.000996432 Jy ! Component: 200 - total flux cleaned = 0.00115159 Jy ! Total flux subtracted in 200 components = 0.00115159 Jy ! Clean residual min=-0.049513 max=0.076521 Jy/beam ! Clean residual mean=-0.000472 rms=0.024755 Jy/beam ! Combined flux in latest and established models = 0.358742 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.358742 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.691 mas, bmaj=11.59 mas, bpa=14.15 degrees ! Estimated noise=1394.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00416523 Jy ! Component: 100 - total flux cleaned = -0.00611653 Jy ! Component: 150 - total flux cleaned = -0.00748532 Jy ! Component: 200 - total flux cleaned = -0.00800778 Jy ! Total flux subtracted in 200 components = -0.00800778 Jy ! Clean residual min=-0.031556 max=0.046423 Jy/beam ! Clean residual mean=-0.000247 rms=0.013775 Jy/beam ! Combined flux in latest and established models = 0.350734 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.350734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388560Jy sigma=0.000973 ! Fit after self-cal, rms=0.389942Jy sigma=0.000969 wmodel J2138-1810_S_2017_08_12_pus_map.mod ! Writing 98 model components to file: J2138-1810_S_2017_08_12_pus_map.mod wobs J2138-1810_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2138-1810_S_2017_08_12_pus_uvs.fits wwins J2138-1810_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J2138-1810_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192159 Jy ! Component: 100 - total flux cleaned = 0.036046 Jy ! Component: 150 - total flux cleaned = 0.0509745 Jy ! Component: 200 - total flux cleaned = 0.0620975 Jy ! Component: 250 - total flux cleaned = 0.0732979 Jy ! Component: 300 - total flux cleaned = 0.0852036 Jy ! Component: 350 - total flux cleaned = 0.0962358 Jy ! Component: 400 - total flux cleaned = 0.106462 Jy ! Component: 450 - total flux cleaned = 0.115943 Jy ! Component: 500 - total flux cleaned = 0.124725 Jy ! Component: 550 - total flux cleaned = 0.132847 Jy ! Component: 600 - total flux cleaned = 0.140346 Jy ! Component: 650 - total flux cleaned = 0.147705 Jy ! Component: 700 - total flux cleaned = 0.154037 Jy ! Component: 750 - total flux cleaned = 0.160261 Jy ! Component: 800 - total flux cleaned = 0.166822 Jy ! Component: 850 - total flux cleaned = 0.172417 Jy ! Component: 900 - total flux cleaned = 0.178359 Jy ! Component: 950 - total flux cleaned = 0.183803 Jy ! Component: 1000 - total flux cleaned = 0.190006 Jy ! Component: 1050 - total flux cleaned = 0.195317 Jy ! Component: 1100 - total flux cleaned = 0.201373 Jy ! Component: 1150 - total flux cleaned = 0.206957 Jy ! Component: 1200 - total flux cleaned = 0.212484 Jy ! Component: 1250 - total flux cleaned = 0.219909 Jy ! Component: 1300 - total flux cleaned = 0.226108 Jy ! Component: 1350 - total flux cleaned = 0.232255 Jy ! Component: 1400 - total flux cleaned = 0.238354 Jy ! Component: 1450 - total flux cleaned = 0.245167 Jy ! Component: 1500 - total flux cleaned = 0.250808 Jy ! Component: 1550 - total flux cleaned = 0.257901 Jy ! Component: 1600 - total flux cleaned = 0.264579 Jy ! Component: 1650 - total flux cleaned = 0.269744 Jy ! Component: 1700 - total flux cleaned = 0.275992 Jy ! Component: 1750 - total flux cleaned = 0.281851 Jy ! Component: 1800 - total flux cleaned = 0.288428 Jy ! Component: 1850 - total flux cleaned = 0.29462 Jy ! Component: 1900 - total flux cleaned = 0.302256 Jy ! Component: 1950 - total flux cleaned = 0.309517 Jy ! Component: 2000 - total flux cleaned = 0.316044 Jy ! Component: 2050 - total flux cleaned = 0.322931 Jy ! Component: 2100 - total flux cleaned = 0.328008 Jy ! Component: 2150 - total flux cleaned = 0.333822 Jy ! Component: 2200 - total flux cleaned = 0.339651 Jy ! Component: 2250 - total flux cleaned = 0.344765 Jy ! Component: 2300 - total flux cleaned = 0.350259 Jy ! Component: 2350 - total flux cleaned = 0.355402 Jy ! Component: 2400 - total flux cleaned = 0.360561 Jy ! Component: 2450 - total flux cleaned = 0.365738 Jy ! Component: 2500 - total flux cleaned = 0.370195 Jy ! Component: 2550 - total flux cleaned = 0.375051 Jy ! Component: 2600 - total flux cleaned = 0.379556 Jy ! Component: 2650 - total flux cleaned = 0.383711 Jy ! Component: 2700 - total flux cleaned = 0.38827 Jy ! Component: 2750 - total flux cleaned = 0.392095 Jy ! Component: 2800 - total flux cleaned = 0.396714 Jy ! Component: 2850 - total flux cleaned = 0.401362 Jy ! Component: 2900 - total flux cleaned = 0.406041 Jy ! Component: 2950 - total flux cleaned = 0.410745 Jy ! Component: 3000 - total flux cleaned = 0.41588 Jy ! Component: 3050 - total flux cleaned = 0.420256 Jy ! Component: 3100 - total flux cleaned = 0.425461 Jy ! Component: 3150 - total flux cleaned = 0.430706 Jy ! Component: 3200 - total flux cleaned = 0.438039 Jy ! Component: 3250 - total flux cleaned = 0.445034 Jy ! Component: 3300 - total flux cleaned = 0.451696 Jy ! Component: 3350 - total flux cleaned = 0.458851 Jy ! Component: 3400 - total flux cleaned = 0.465663 Jy ! Component: 3450 - total flux cleaned = 0.471692 Jy ! Component: 3500 - total flux cleaned = 0.478662 Jy ! Component: 3550 - total flux cleaned = 0.486168 Jy ! Component: 3600 - total flux cleaned = 0.492876 Jy ! Component: 3650 - total flux cleaned = 0.50057 Jy ! Component: 3700 - total flux cleaned = 0.507909 Jy ! Component: 3750 - total flux cleaned = 0.51581 Jy ! Component: 3800 - total flux cleaned = 0.523352 Jy ! Component: 3850 - total flux cleaned = 0.530032 Jy ! Component: 3900 - total flux cleaned = 0.538246 Jy ! Component: 3950 - total flux cleaned = 0.544614 Jy ! Component: 4000 - total flux cleaned = 0.552561 Jy ! Component: 4050 - total flux cleaned = 0.559606 Jy ! Total flux subtracted in 4096 components = 0.566748 Jy ! Clean residual min=-0.027707 max=0.027849 Jy/beam ! Clean residual mean=-0.000041 rms=0.008809 Jy/beam ! Combined flux in latest and established models = 0.917482 Jy keep ! Adding 566 model components to the UV plane model. ! The established model now contains 664 components and 0.917482 Jy ![Exited script file: muppet] wmap "J2138-1810_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 11.59 at 14.15 degrees (North through East) ! Clean map min=-0.03108 max=0.17698 Jy/beam ! Writing clean map to FITS file: J2138-1810_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176979 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00852104 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -14.4441 14.4441 28.8882 57.7765 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0255 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.691 x 11.59 at 14.15 degrees (North through East) ! Clean map min=-0.03108 max=0.17698 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2138-1810_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:08:46 2019