! Started logfile: J2135+4710_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:56 2019 obs J2135+4710_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2135+4710_S_2017_01_16_pus_uva.fits ! AN table 1: 143 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.704118 visibilities/baseline/integration-bin. ! Found source: J2135+4710 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 18124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2135+4710_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 224 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977250Jy sigma=0.008566 ! Fit after self-cal, rms=0.953935Jy sigma=0.008399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.819 mas, bmaj=6.267 mas, bpa=21.41 degrees ! Estimated noise=1165.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366186 Jy ! Component: 100 - total flux cleaned = 0.0462513 Jy ! Total flux subtracted in 100 components = 0.0462513 Jy ! Clean residual min=-0.003748 max=0.004247 Jy/beam ! Clean residual mean=-0.000008 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0462513 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0462513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090666Jy sigma=0.000646 ! Fit after self-cal, rms=0.090204Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.401 mas, bmaj=6.768 mas, bpa=19.49 degrees ! Estimated noise=659.566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673879 Jy ! Component: 100 - total flux cleaned = 0.0107573 Jy ! Component: 150 - total flux cleaned = 0.0133605 Jy ! Component: 200 - total flux cleaned = 0.0150687 Jy ! Total flux subtracted in 200 components = 0.0150687 Jy ! Clean residual min=-0.002022 max=0.002149 Jy/beam ! Clean residual mean=-0.000008 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.06132 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 49 components and 0.06132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089672Jy sigma=0.000636 ! Fit after self-cal, rms=0.089559Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.05 KP 0.94 ! LA 0.90 MK 1.00* NL 0.89 OV 1.03 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.10 KP 0.93 ! LA 0.96 MK 1.00* NL 1.01 OV 1.10 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 HN 1.09 KP 0.98 ! LA 0.93 MK 1.00* NL 1.07 OV 1.08 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 0.99 KP 1.00* ! LA 0.97 MK 1.00* NL 1.00* OV 0.98 ! PT 0.91 SC 0.34 ! ! ! Fit before self-cal, rms=0.089559Jy sigma=0.000635 ! Fit after self-cal, rms=0.077226Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.352 mas, bmaj=6.811 mas, bpa=20.52 degrees ! Estimated noise=651.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146781 Jy ! Component: 100 - total flux cleaned = 0.00213796 Jy ! Component: 150 - total flux cleaned = 0.00225036 Jy ! Component: 200 - total flux cleaned = 0.00234695 Jy ! Total flux subtracted in 200 components = 0.00234695 Jy ! Clean residual min=-0.001812 max=0.001824 Jy/beam ! Clean residual mean=-0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0636669 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.0636669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077193Jy sigma=0.000634 ! Fit after self-cal, rms=0.077125Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077125Jy sigma=0.000633 ! Fit after self-cal, rms=0.076411Jy sigma=0.000632 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.387 mas, bmaj=6.74 mas, bpa=20.43 degrees ! Estimated noise=653.584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010801 Jy ! Component: 100 - total flux cleaned = 0.00113808 Jy ! Component: 150 - total flux cleaned = 0.00121163 Jy ! Component: 200 - total flux cleaned = 0.00127567 Jy ! Total flux subtracted in 200 components = 0.00127567 Jy ! Clean residual min=-0.001806 max=0.001808 Jy/beam ! Clean residual mean=-0.000002 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0649426 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 70 components and 0.0649426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076389Jy sigma=0.000632 ! Fit after self-cal, rms=0.076401Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156692 Jy ! Component: 100 - total flux cleaned = 0.00176808 Jy ! Component: 150 - total flux cleaned = 0.00202136 Jy ! Component: 200 - total flux cleaned = 0.00216016 Jy ! Total flux subtracted in 200 components = 0.00216016 Jy ! Clean residual min=-0.001664 max=0.001702 Jy/beam ! Clean residual mean=-0.000002 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0671027 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.0671027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076353Jy sigma=0.000631 ! Fit after self-cal, rms=0.076327Jy sigma=0.000631 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076327Jy sigma=0.000631 ! Fit after self-cal, rms=0.076123Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.343 mas, bmaj=6.693 mas, bpa=20.82 degrees ! Estimated noise=650.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131402 Jy ! Component: 100 - total flux cleaned = 0.00177344 Jy ! Component: 150 - total flux cleaned = 0.00201143 Jy ! Component: 200 - total flux cleaned = 0.00206282 Jy ! Total flux subtracted in 200 components = 0.00206282 Jy ! Clean residual min=-0.001522 max=0.001706 Jy/beam ! Clean residual mean=-0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0691656 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.0691656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076091Jy sigma=0.000630 ! Fit after self-cal, rms=0.076092Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638496 Jy ! Component: 100 - total flux cleaned = 0.000582015 Jy ! Component: 150 - total flux cleaned = 0.000557579 Jy ! Component: 200 - total flux cleaned = 0.000534841 Jy ! Total flux subtracted in 200 components = 0.000534841 Jy ! Clean residual min=-0.001497 max=0.001696 Jy/beam ! Clean residual mean=-0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0697004 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 0.0697004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076072Jy sigma=0.000630 ! Fit after self-cal, rms=0.076063Jy sigma=0.000630 ! Inverting map ! Added new window around map position (24.5, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014493 Jy ! Component: 100 - total flux cleaned = 0.00178826 Jy ! Component: 150 - total flux cleaned = 0.00198504 Jy ! Component: 200 - total flux cleaned = 0.00213623 Jy ! Total flux subtracted in 200 components = 0.00213623 Jy ! Clean residual min=-0.001456 max=0.001601 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0718366 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.0718366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076022Jy sigma=0.000630 ! Fit after self-cal, rms=0.076014Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076014Jy sigma=0.000630 ! Fit after self-cal, rms=0.075548Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.921 mas, bmaj=8.917 mas, bpa=6.733 degrees ! Estimated noise=782.357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975131 Jy ! Component: 100 - total flux cleaned = 0.00123056 Jy ! Component: 150 - total flux cleaned = 0.00137625 Jy ! Component: 200 - total flux cleaned = 0.00151537 Jy ! Total flux subtracted in 200 components = 0.00151537 Jy ! Clean residual min=-0.001546 max=0.001614 Jy/beam ! Clean residual mean=-0.000002 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.073352 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 141 components and 0.073352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075530Jy sigma=0.000629 ! Fit after self-cal, rms=0.075536Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499524 Jy ! Component: 100 - total flux cleaned = 0.000566627 Jy ! Component: 150 - total flux cleaned = 0.000639161 Jy ! Component: 200 - total flux cleaned = 0.00070232 Jy ! Total flux subtracted in 200 components = 0.00070232 Jy ! Clean residual min=-0.001493 max=0.001621 Jy/beam ! Clean residual mean=-0.000002 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0740543 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 156 components and 0.0740543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075527Jy sigma=0.000629 ! Fit after self-cal, rms=0.075514Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=6.654 mas, bpa=21.27 degrees ! Estimated noise=645.026 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.298 x 6.654 at 21.27 degrees (North through East) ! Clean map min=-0.001398 max=0.046124 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.672 mas, bmaj=6.194 mas, bpa=23.21 degrees ! Estimated noise=1110.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344521 Jy ! Component: 100 - total flux cleaned = 0.0459543 Jy ! Component: 150 - total flux cleaned = 0.0528209 Jy ! Component: 200 - total flux cleaned = 0.0579338 Jy ! Total flux subtracted in 200 components = 0.0579338 Jy ! Clean residual min=-0.003632 max=0.003277 Jy/beam ! Clean residual mean=-0.000005 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.0579338 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.0579338 Jy ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=6.654 mas, bpa=21.27 degrees ! Estimated noise=645.026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00467794 Jy ! Component: 100 - total flux cleaned = 0.00793259 Jy ! Component: 150 - total flux cleaned = 0.0104779 Jy ! Component: 200 - total flux cleaned = 0.0118729 Jy ! Total flux subtracted in 200 components = 0.0118729 Jy ! Clean residual min=-0.001800 max=0.001791 Jy/beam ! Clean residual mean=-0.000003 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0698067 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 62 components and 0.0698067 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.921 mas, bmaj=8.917 mas, bpa=6.733 degrees ! Estimated noise=782.357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00188617 Jy ! Component: 100 - total flux cleaned = 0.00274093 Jy ! Component: 150 - total flux cleaned = 0.00315677 Jy ! Component: 200 - total flux cleaned = 0.0033162 Jy ! Total flux subtracted in 200 components = 0.0033162 Jy ! Clean residual min=-0.001648 max=0.001657 Jy/beam ! Clean residual mean=-0.000002 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0731229 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174086 Jy ! Component: 100 - total flux cleaned = 0.000381377 Jy ! Component: 150 - total flux cleaned = 0.000509298 Jy ! Component: 200 - total flux cleaned = 0.000623144 Jy ! Total flux subtracted in 200 components = 0.000623144 Jy ! Clean residual min=-0.001589 max=0.001584 Jy/beam ! Clean residual mean=-0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0737461 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 119 components and 0.0737461 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=6.654 mas, bpa=21.27 degrees ! Estimated noise=645.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.7096e-06 Jy ! Component: 100 - total flux cleaned = 5.515e-06 Jy ! Component: 150 - total flux cleaned = -2.95721e-05 Jy ! Component: 200 - total flux cleaned = -2.87662e-05 Jy ! Total flux subtracted in 200 components = -2.87662e-05 Jy ! Clean residual min=-0.001560 max=0.001619 Jy/beam ! Clean residual mean=-0.000001 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.0737173 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 139 components and 0.0737173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075538Jy sigma=0.000629 ! Fit after self-cal, rms=0.075526Jy sigma=0.000629 wmodel J2135+4710_S_2017_01_16_pus_map.mod ! Writing 139 model components to file: J2135+4710_S_2017_01_16_pus_map.mod wobs J2135+4710_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2135+4710_S_2017_01_16_pus_uvs.fits wwins J2135+4710_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J2135+4710_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144629 Jy ! Component: 100 - total flux cleaned = 6.62149e-05 Jy ! Component: 150 - total flux cleaned = 4.18229e-05 Jy ! Component: 200 - total flux cleaned = -5.43171e-05 Jy ! Component: 250 - total flux cleaned = -0.000124295 Jy ! Component: 300 - total flux cleaned = -0.000169424 Jy ! Component: 350 - total flux cleaned = -0.000257023 Jy ! Component: 400 - total flux cleaned = -0.000257136 Jy ! Component: 450 - total flux cleaned = -0.000195193 Jy ! Component: 500 - total flux cleaned = -9.4339e-05 Jy ! Component: 550 - total flux cleaned = -9.48287e-05 Jy ! Component: 600 - total flux cleaned = -5.56727e-05 Jy ! Component: 650 - total flux cleaned = -7.50194e-05 Jy ! Component: 700 - total flux cleaned = -9.40622e-05 Jy ! Component: 750 - total flux cleaned = -0.000112367 Jy ! Component: 800 - total flux cleaned = -7.55813e-05 Jy ! Component: 850 - total flux cleaned = -3.95871e-05 Jy ! Component: 900 - total flux cleaned = -3.94825e-05 Jy ! Component: 950 - total flux cleaned = -3.93383e-05 Jy ! Component: 1000 - total flux cleaned = 1.27537e-05 Jy ! Component: 1050 - total flux cleaned = 8.12258e-05 Jy ! Component: 1100 - total flux cleaned = 0.000132128 Jy ! Component: 1150 - total flux cleaned = 0.000198573 Jy ! Component: 1200 - total flux cleaned = 0.000231247 Jy ! Component: 1250 - total flux cleaned = 0.00032858 Jy ! Component: 1300 - total flux cleaned = 0.000328565 Jy ! Component: 1350 - total flux cleaned = 0.000376377 Jy ! Component: 1400 - total flux cleaned = 0.000470568 Jy ! Component: 1450 - total flux cleaned = 0.000470608 Jy ! Component: 1500 - total flux cleaned = 0.000501402 Jy ! Component: 1550 - total flux cleaned = 0.000501471 Jy ! Component: 1600 - total flux cleaned = 0.000546873 Jy ! Component: 1650 - total flux cleaned = 0.000635909 Jy ! Component: 1700 - total flux cleaned = 0.000621043 Jy ! Component: 1750 - total flux cleaned = 0.000635685 Jy ! Component: 1800 - total flux cleaned = 0.000693081 Jy ! Component: 1850 - total flux cleaned = 0.000678769 Jy ! Component: 1900 - total flux cleaned = 0.000678942 Jy ! Component: 1950 - total flux cleaned = 0.000720922 Jy ! Component: 2000 - total flux cleaned = 0.000720843 Jy ! Component: 2050 - total flux cleaned = 0.000693265 Jy ! Component: 2100 - total flux cleaned = 0.000666191 Jy ! Component: 2150 - total flux cleaned = 0.000625875 Jy ! Component: 2200 - total flux cleaned = 0.000586144 Jy ! Component: 2250 - total flux cleaned = 0.000625779 Jy ! Component: 2300 - total flux cleaned = 0.000638982 Jy ! Component: 2350 - total flux cleaned = 0.000612984 Jy ! Component: 2400 - total flux cleaned = 0.00057438 Jy ! Component: 2450 - total flux cleaned = 0.000600129 Jy ! Component: 2500 - total flux cleaned = 0.000600168 Jy ! Component: 2550 - total flux cleaned = 0.00061283 Jy ! Component: 2600 - total flux cleaned = 0.000650018 Jy ! Component: 2650 - total flux cleaned = 0.000613086 Jy ! Component: 2700 - total flux cleaned = 0.000613118 Jy ! Component: 2750 - total flux cleaned = 0.00058886 Jy ! Component: 2800 - total flux cleaned = 0.000625094 Jy ! Component: 2850 - total flux cleaned = 0.000553291 Jy ! Component: 2900 - total flux cleaned = 0.000577085 Jy ! Component: 2950 - total flux cleaned = 0.000577027 Jy ! Component: 3000 - total flux cleaned = 0.000577127 Jy ! Component: 3050 - total flux cleaned = 0.000600215 Jy ! Component: 3100 - total flux cleaned = 0.000565846 Jy ! Component: 3150 - total flux cleaned = 0.000611446 Jy ! Component: 3200 - total flux cleaned = 0.000645381 Jy ! Component: 3250 - total flux cleaned = 0.000622857 Jy ! Component: 3300 - total flux cleaned = 0.000678602 Jy ! Component: 3350 - total flux cleaned = 0.000678449 Jy ! Component: 3400 - total flux cleaned = 0.000656396 Jy ! Component: 3450 - total flux cleaned = 0.000710837 Jy ! Component: 3500 - total flux cleaned = 0.000710835 Jy ! Component: 3550 - total flux cleaned = 0.000732273 Jy ! Component: 3600 - total flux cleaned = 0.000721685 Jy ! Component: 3650 - total flux cleaned = 0.000732346 Jy ! Component: 3700 - total flux cleaned = 0.00072192 Jy ! Component: 3750 - total flux cleaned = 0.000774188 Jy ! Component: 3800 - total flux cleaned = 0.000805368 Jy ! Component: 3850 - total flux cleaned = 0.000753769 Jy ! Component: 3900 - total flux cleaned = 0.000784507 Jy ! Component: 3950 - total flux cleaned = 0.000815029 Jy ! Component: 4000 - total flux cleaned = 0.000774605 Jy ! Component: 4050 - total flux cleaned = 0.000824838 Jy ! Total flux subtracted in 4096 components = 0.000814864 Jy ! Clean residual min=-0.000600 max=0.000598 Jy/beam ! Clean residual mean=0.000002 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0745322 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 422 components and 0.0745322 Jy ![Exited script file: muppet] wmap "J2135+4710_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.298 x 6.654 at 21.27 degrees (North through East) ! Clean map min=-0.0014145 max=0.045897 Jy/beam ! Writing clean map to FITS file: J2135+4710_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0458973 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185681 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21367 1.21367 2.42735 4.8547 9.70939 19.4188 38.8376 77.6752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.298 x 6.654 at 21.27 degrees (North through East) ! Clean map min=-0.0014145 max=0.045897 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2135+4710_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:23:01 2019