! Started logfile: J2134-0153_S_2017_09_26_pus_uvs.log on Sat May 11 13:07:08 2019 obs J2134-0153_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.798077 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2988 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.438252Jy sigma=0.003304 ! Fit after self-cal, rms=0.431068Jy sigma=0.003246 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=14.46 mas, bpa=-19.35 degrees ! Estimated noise=2252.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.7279 Jy ! Component: 100 - total flux cleaned = 0.982951 Jy ! Total flux subtracted in 100 components = 0.982951 Jy ! Clean residual min=-0.078989 max=0.110979 Jy/beam ! Clean residual mean=-0.000462 rms=0.024955 Jy/beam ! Combined flux in latest and established models = 0.982951 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.982951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377926Jy sigma=0.002899 ! Fit after self-cal, rms=0.377829Jy sigma=0.002898 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=14.48 mas, bpa=-18.89 degrees ! Estimated noise=1885.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15373 Jy ! Component: 100 - total flux cleaned = 0.241044 Jy ! Component: 150 - total flux cleaned = 0.304428 Jy ! Component: 200 - total flux cleaned = 0.35272 Jy ! Total flux subtracted in 200 components = 0.35272 Jy ! Clean residual min=-0.063312 max=0.072929 Jy/beam ! Clean residual mean=-0.000591 rms=0.020002 Jy/beam ! Combined flux in latest and established models = 1.33567 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 79 components and 1.33567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313898Jy sigma=0.002208 ! Fit after self-cal, rms=0.313754Jy sigma=0.002207 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.87 HN 1.03 KP 1.01 ! LA 1.01 MK 1.15 NL 0.83 OV 0.99 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.92 HN 1.08 KP 0.96 ! LA 0.97 MK 1.13 NL 0.98 OV 1.02 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.95 HN 1.06 KP 0.94 ! LA 0.95 MK 0.89 NL 0.98 OV 0.95 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.10 KP 1.00* ! LA 1.85 MK 1.43 NL 1.00* OV 1.00* ! PT 0.86 ! ! ! Fit before self-cal, rms=0.313754Jy sigma=0.002207 ! Fit after self-cal, rms=0.317693Jy sigma=0.001893 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=14.91 mas, bpa=-18.83 degrees ! Estimated noise=1868.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0137027 Jy ! Component: 100 - total flux cleaned = -0.0157342 Jy ! Component: 150 - total flux cleaned = -0.017606 Jy ! Component: 200 - total flux cleaned = -0.0184862 Jy ! Total flux subtracted in 200 components = -0.0184862 Jy ! Clean residual min=-0.064351 max=0.071258 Jy/beam ! Clean residual mean=-0.000576 rms=0.017230 Jy/beam ! Combined flux in latest and established models = 1.31718 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 1.31719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309172Jy sigma=0.001844 ! Fit after self-cal, rms=0.309143Jy sigma=0.001842 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309143Jy sigma=0.001842 ! Fit after self-cal, rms=0.170338Jy sigma=0.000856 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.805 mas, bmaj=14.75 mas, bpa=-18.61 degrees ! Estimated noise=1892.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00630298 Jy ! Component: 100 - total flux cleaned = -0.00697338 Jy ! Component: 150 - total flux cleaned = -0.00650441 Jy ! Component: 200 - total flux cleaned = -0.00607486 Jy ! Total flux subtracted in 200 components = -0.00607486 Jy ! Clean residual min=-0.019949 max=0.026684 Jy/beam ! Clean residual mean=-0.000079 rms=0.005394 Jy/beam ! Combined flux in latest and established models = 1.31111 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 114 components and 1.31111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165235Jy sigma=0.000813 ! Fit after self-cal, rms=0.165578Jy sigma=0.000811 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265355 Jy ! Component: 100 - total flux cleaned = 0.041342 Jy ! Component: 150 - total flux cleaned = 0.048976 Jy ! Component: 200 - total flux cleaned = 0.054879 Jy ! Total flux subtracted in 200 components = 0.054879 Jy ! Clean residual min=-0.015359 max=0.014597 Jy/beam ! Clean residual mean=0.000021 rms=0.004037 Jy/beam ! Combined flux in latest and established models = 1.36599 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 158 components and 1.36599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160178Jy sigma=0.000745 ! Fit after self-cal, rms=0.159476Jy sigma=0.000740 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159476Jy sigma=0.000740 ! Fit after self-cal, rms=0.156809Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.787 mas, bmaj=14.78 mas, bpa=-18.6 degrees ! Estimated noise=1882.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00942975 Jy ! Component: 100 - total flux cleaned = 0.0134893 Jy ! Component: 150 - total flux cleaned = 0.0151763 Jy ! Component: 200 - total flux cleaned = 0.0169504 Jy ! Total flux subtracted in 200 components = 0.0169504 Jy ! Clean residual min=-0.011219 max=0.010726 Jy/beam ! Clean residual mean=0.000008 rms=0.002926 Jy/beam ! Combined flux in latest and established models = 1.38294 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 186 components and 1.38294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154495Jy sigma=0.000697 ! Fit after self-cal, rms=0.154265Jy sigma=0.000696 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369406 Jy ! Component: 100 - total flux cleaned = 0.00495223 Jy ! Component: 150 - total flux cleaned = 0.00608257 Jy ! Component: 200 - total flux cleaned = 0.00669565 Jy ! Total flux subtracted in 200 components = 0.00669565 Jy ! Clean residual min=-0.010494 max=0.010578 Jy/beam ! Clean residual mean=0.000019 rms=0.002688 Jy/beam ! Combined flux in latest and established models = 1.38964 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 203 components and 1.38963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153359Jy sigma=0.000688 ! Fit after self-cal, rms=0.153285Jy sigma=0.000688 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153285Jy sigma=0.000688 ! Fit after self-cal, rms=0.153367Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.007 mas, bmaj=15.65 mas, bpa=-9.738 degrees ! Estimated noise=2188.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00880383 Jy ! Component: 100 - total flux cleaned = 0.00981185 Jy ! Component: 150 - total flux cleaned = 0.0102293 Jy ! Component: 200 - total flux cleaned = 0.0102213 Jy ! Total flux subtracted in 200 components = 0.0102213 Jy ! Clean residual min=-0.010780 max=0.011007 Jy/beam ! Clean residual mean=0.000016 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 1.39986 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 233 components and 1.39986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152671Jy sigma=0.000677 ! Fit after self-cal, rms=0.152617Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103427 Jy ! Component: 100 - total flux cleaned = 0.00103231 Jy ! Component: 150 - total flux cleaned = 0.000869767 Jy ! Component: 200 - total flux cleaned = 0.000871364 Jy ! Total flux subtracted in 200 components = 0.000871364 Jy ! Clean residual min=-0.010419 max=0.010501 Jy/beam ! Clean residual mean=0.000019 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 1.40073 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 244 components and 1.40073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152419Jy sigma=0.000675 ! Fit after self-cal, rms=0.152404Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=14.8 mas, bpa=-18.6 degrees ! Estimated noise=1879.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.78 x 14.8 at -18.6 degrees (North through East) ! Clean map min=-0.010565 max=0.96313 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152404Jy sigma=0.000675 ! Fit after self-cal, rms=0.146529Jy sigma=0.000614 ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=14.82 mas, bpa=-18.62 degrees ! Estimated noise=1872.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000821694 Jy ! Component: 100 - total flux cleaned = -0.000242069 Jy ! Component: 150 - total flux cleaned = 0.000105862 Jy ! Component: 200 - total flux cleaned = 0.000744525 Jy ! Total flux subtracted in 200 components = 0.000744525 Jy ! Clean residual min=-0.009197 max=0.007350 Jy/beam ! Clean residual mean=-0.000003 rms=0.002005 Jy/beam ! Combined flux in latest and established models = 1.40147 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 259 components and 1.40147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145950Jy sigma=0.000608 ! Fit after self-cal, rms=0.145922Jy sigma=0.000608 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000620411 Jy ! Component: 100 - total flux cleaned = 0.00104172 Jy ! Component: 150 - total flux cleaned = 0.00143693 Jy ! Component: 200 - total flux cleaned = 0.00193449 Jy ! Total flux subtracted in 200 components = 0.00193449 Jy ! Clean residual min=-0.008682 max=0.007191 Jy/beam ! Clean residual mean=-0.000000 rms=0.001927 Jy/beam ! Combined flux in latest and established models = 1.40341 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 267 components and 1.40341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145538Jy sigma=0.000605 ! Fit after self-cal, rms=0.145525Jy sigma=0.000605 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145525Jy sigma=0.000605 ! Fit after self-cal, rms=0.145890Jy sigma=0.000604 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=14.84 mas, bpa=-19.2 degrees ! Estimated noise=2291.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.733468 Jy ! Component: 100 - total flux cleaned = 0.979563 Jy ! Component: 150 - total flux cleaned = 1.09322 Jy ! Component: 200 - total flux cleaned = 1.15298 Jy ! Total flux subtracted in 200 components = 1.15298 Jy ! Clean residual min=-0.020164 max=0.031371 Jy/beam ! Clean residual mean=-0.000189 rms=0.006700 Jy/beam ! Combined flux in latest and established models = 1.15298 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.15298 Jy ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=14.83 mas, bpa=-18.61 degrees ! Estimated noise=1870.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529715 Jy ! Component: 100 - total flux cleaned = 0.0896428 Jy ! Component: 150 - total flux cleaned = 0.116737 Jy ! Component: 200 - total flux cleaned = 0.138024 Jy ! Total flux subtracted in 200 components = 0.138024 Jy ! Clean residual min=-0.011107 max=0.017292 Jy/beam ! Clean residual mean=-0.000207 rms=0.003997 Jy/beam ! Combined flux in latest and established models = 1.291 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 81 components and 1.291 Jy ! Inverting map ! Added new window around map position (10, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191338 Jy ! Component: 100 - total flux cleaned = 0.0338215 Jy ! Component: 150 - total flux cleaned = 0.0459826 Jy ! Component: 200 - total flux cleaned = 0.056223 Jy ! Total flux subtracted in 200 components = 0.056223 Jy ! Clean residual min=-0.007892 max=0.008780 Jy/beam ! Clean residual mean=-0.000105 rms=0.002425 Jy/beam ! Combined flux in latest and established models = 1.34722 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 135 components and 1.34723 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.983 mas, bmaj=15.67 mas, bpa=-9.812 degrees ! Estimated noise=2188.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127954 Jy ! Component: 100 - total flux cleaned = 0.022271 Jy ! Component: 150 - total flux cleaned = 0.0296172 Jy ! Component: 200 - total flux cleaned = 0.035392 Jy ! Total flux subtracted in 200 components = 0.035392 Jy ! Clean residual min=-0.008302 max=0.007951 Jy/beam ! Clean residual mean=-0.000071 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 1.38262 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392894 Jy ! Component: 100 - total flux cleaned = 0.00641551 Jy ! Component: 150 - total flux cleaned = 0.00867722 Jy ! Component: 200 - total flux cleaned = 0.0105063 Jy ! Total flux subtracted in 200 components = 0.0105063 Jy ! Clean residual min=-0.007729 max=0.007305 Jy/beam ! Clean residual mean=-0.000036 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 1.39312 Jy ! Adding 130 model components to the UV plane model. ! The established model now contains 252 components and 1.39312 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=14.83 mas, bpa=-18.61 degrees ! Estimated noise=1870.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246746 Jy ! Component: 100 - total flux cleaned = 0.00335148 Jy ! Component: 150 - total flux cleaned = 0.0038824 Jy ! Component: 200 - total flux cleaned = 0.00387953 Jy ! Total flux subtracted in 200 components = 0.00387953 Jy ! Clean residual min=-0.007224 max=0.006686 Jy/beam ! Clean residual mean=-0.000014 rms=0.001659 Jy/beam ! Combined flux in latest and established models = 1.397 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 282 components and 1.397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145458Jy sigma=0.000601 ! Fit after self-cal, rms=0.145413Jy sigma=0.000600 wmodel J2134-0153_S_2017_09_26_pus_map.mod ! Writing 282 model components to file: J2134-0153_S_2017_09_26_pus_map.mod wobs J2134-0153_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_09_26_pus_uvs.fits wwins J2134-0153_S_2017_09_26_pus_map.win ! wwins: Wrote 3 windows to J2134-0153_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00181264 Jy ! Component: 100 - total flux cleaned = -0.00180975 Jy ! Component: 150 - total flux cleaned = -0.00151838 Jy ! Component: 200 - total flux cleaned = -0.000771177 Jy ! Component: 250 - total flux cleaned = -5.39545e-05 Jy ! Component: 300 - total flux cleaned = 0.000290814 Jy ! Component: 350 - total flux cleaned = 0.000787943 Jy ! Component: 400 - total flux cleaned = 0.00118839 Jy ! Component: 450 - total flux cleaned = 0.00180743 Jy ! Component: 500 - total flux cleaned = 0.00233607 Jy ! Component: 550 - total flux cleaned = 0.00307058 Jy ! Component: 600 - total flux cleaned = 0.00342876 Jy ! Component: 650 - total flux cleaned = 0.00385027 Jy ! Component: 700 - total flux cleaned = 0.00459964 Jy ! Component: 750 - total flux cleaned = 0.00473283 Jy ! Component: 800 - total flux cleaned = 0.00512605 Jy ! Component: 850 - total flux cleaned = 0.00531974 Jy ! Component: 900 - total flux cleaned = 0.00575887 Jy ! Component: 950 - total flux cleaned = 0.00606526 Jy ! Component: 1000 - total flux cleaned = 0.00624562 Jy ! Component: 1050 - total flux cleaned = 0.00642282 Jy ! Component: 1100 - total flux cleaned = 0.00659745 Jy ! Component: 1150 - total flux cleaned = 0.00676883 Jy ! Component: 1200 - total flux cleaned = 0.00693719 Jy ! Component: 1250 - total flux cleaned = 0.00688003 Jy ! Component: 1300 - total flux cleaned = 0.00682545 Jy ! Component: 1350 - total flux cleaned = 0.0069334 Jy ! Component: 1400 - total flux cleaned = 0.00672197 Jy ! Component: 1450 - total flux cleaned = 0.00677487 Jy ! Component: 1500 - total flux cleaned = 0.00672283 Jy ! Component: 1550 - total flux cleaned = 0.00662103 Jy ! Component: 1600 - total flux cleaned = 0.0065713 Jy ! Component: 1650 - total flux cleaned = 0.00632474 Jy ! Component: 1700 - total flux cleaned = 0.00622719 Jy ! Component: 1750 - total flux cleaned = 0.00613044 Jy ! Component: 1800 - total flux cleaned = 0.00612965 Jy ! Component: 1850 - total flux cleaned = 0.00603523 Jy ! Component: 1900 - total flux cleaned = 0.00594149 Jy ! Component: 1950 - total flux cleaned = 0.00594105 Jy ! Component: 2000 - total flux cleaned = 0.00580482 Jy ! Component: 2050 - total flux cleaned = 0.00580479 Jy ! Component: 2100 - total flux cleaned = 0.00576099 Jy ! Component: 2150 - total flux cleaned = 0.00576118 Jy ! Component: 2200 - total flux cleaned = 0.00576081 Jy ! Component: 2250 - total flux cleaned = 0.00567493 Jy ! Component: 2300 - total flux cleaned = 0.00571767 Jy ! Component: 2350 - total flux cleaned = 0.00567498 Jy ! Component: 2400 - total flux cleaned = 0.00554981 Jy ! Component: 2450 - total flux cleaned = 0.00563262 Jy ! Component: 2500 - total flux cleaned = 0.00555111 Jy ! Component: 2550 - total flux cleaned = 0.00551117 Jy ! Component: 2600 - total flux cleaned = 0.0054712 Jy ! Component: 2650 - total flux cleaned = 0.00543151 Jy ! Component: 2700 - total flux cleaned = 0.00543168 Jy ! Component: 2750 - total flux cleaned = 0.00550998 Jy ! Component: 2800 - total flux cleaned = 0.00543269 Jy ! Component: 2850 - total flux cleaned = 0.00539503 Jy ! Component: 2900 - total flux cleaned = 0.00543339 Jy ! Component: 2950 - total flux cleaned = 0.00524567 Jy ! Component: 3000 - total flux cleaned = 0.00524625 Jy ! Component: 3050 - total flux cleaned = 0.00517249 Jy ! Component: 3100 - total flux cleaned = 0.00517279 Jy ! Component: 3150 - total flux cleaned = 0.00513619 Jy ! Component: 3200 - total flux cleaned = 0.00510011 Jy ! Component: 3250 - total flux cleaned = 0.00513577 Jy ! Component: 3300 - total flux cleaned = 0.00502897 Jy ! Component: 3350 - total flux cleaned = 0.00506462 Jy ! Component: 3400 - total flux cleaned = 0.00502953 Jy ! Component: 3450 - total flux cleaned = 0.00485624 Jy ! Component: 3500 - total flux cleaned = 0.00482205 Jy ! Component: 3550 - total flux cleaned = 0.00482224 Jy ! Component: 3600 - total flux cleaned = 0.00485621 Jy ! Component: 3650 - total flux cleaned = 0.00485631 Jy ! Component: 3700 - total flux cleaned = 0.00485623 Jy ! Component: 3750 - total flux cleaned = 0.00482274 Jy ! Component: 3800 - total flux cleaned = 0.00472349 Jy ! Component: 3850 - total flux cleaned = 0.00469078 Jy ! Component: 3900 - total flux cleaned = 0.00472348 Jy ! Component: 3950 - total flux cleaned = 0.00469049 Jy ! Component: 4000 - total flux cleaned = 0.0046258 Jy ! Component: 4050 - total flux cleaned = 0.00452957 Jy ! Total flux subtracted in 4096 components = 0.00462552 Jy ! Clean residual min=-0.001795 max=0.001738 Jy/beam ! Clean residual mean=-0.000002 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 1.40163 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 560 components and 1.40163 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 14.83 at -18.61 degrees (North through East) ! Clean map min=-0.0062083 max=0.9765 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.976497 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000586564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.180204 0.180204 0.360409 0.720818 1.44164 2.88327 5.76654 11.5331 23.0662 46.1324 92.2647 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.976 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.76 x 14.83 at -18.61 degrees (North through East) ! Clean map min=-0.0062083 max=0.9765 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:07:14 2019