! Started logfile: J2134-0153_S_2017_08_05_pus_uvs.log on Thu May 9 19:39:47 2019 obs J2134-0153_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_08_05_pus_uva.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.679012 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1100 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.550043Jy sigma=0.004748 ! Fit after self-cal, rms=0.467922Jy sigma=0.003960 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=7.363 mas, bpa=-2.334 degrees ! Estimated noise=3249.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.792517 Jy ! Component: 100 - total flux cleaned = 1.10387 Jy ! Total flux subtracted in 100 components = 1.10387 Jy ! Clean residual min=-0.080422 max=0.145376 Jy/beam ! Clean residual mean=0.000092 rms=0.025316 Jy/beam ! Combined flux in latest and established models = 1.10387 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.10387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.342252Jy sigma=0.002856 ! Fit after self-cal, rms=0.341855Jy sigma=0.002851 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=8.175 mas, bpa=-3.557 degrees ! Estimated noise=2683.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204743 Jy ! Component: 100 - total flux cleaned = 0.305178 Jy ! Component: 150 - total flux cleaned = 0.360924 Jy ! Component: 200 - total flux cleaned = 0.393639 Jy ! Total flux subtracted in 200 components = 0.393639 Jy ! Clean residual min=-0.038208 max=0.048134 Jy/beam ! Clean residual mean=0.000099 rms=0.011638 Jy/beam ! Combined flux in latest and established models = 1.49751 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 1.49751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184570Jy sigma=0.001480 ! Fit after self-cal, rms=0.184318Jy sigma=0.001477 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.97 KP 1.05 ! LA 1.00 MK 1.01 NL 0.89 OV 1.05 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.02 KP 1.02 ! LA 0.95 MK 1.01 NL 1.04 OV 1.09 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.99 KP 0.89 ! LA 0.74 MK 1.03 NL 1.17 OV 1.00 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.97 KP 1.00* ! LA 1.00* MK 1.18 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.184318Jy sigma=0.001477 ! Fit after self-cal, rms=0.103300Jy sigma=0.000918 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=8.238 mas, bpa=-3.362 degrees ! Estimated noise=2665.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, 40). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353262 Jy ! Component: 100 - total flux cleaned = 0.0514693 Jy ! Component: 150 - total flux cleaned = 0.0627076 Jy ! Component: 200 - total flux cleaned = 0.0695457 Jy ! Total flux subtracted in 200 components = 0.0695457 Jy ! Clean residual min=-0.018850 max=0.020056 Jy/beam ! Clean residual mean=0.000003 rms=0.005241 Jy/beam ! Combined flux in latest and established models = 1.56705 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 64 components and 1.56705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090325Jy sigma=0.000798 ! Fit after self-cal, rms=0.089917Jy sigma=0.000794 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089917Jy sigma=0.000794 ! Fit after self-cal, rms=0.088787Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.233 mas, bpa=-3.419 degrees ! Estimated noise=2650.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101015 Jy ! Component: 100 - total flux cleaned = 0.0155718 Jy ! Component: 150 - total flux cleaned = 0.0186247 Jy ! Component: 200 - total flux cleaned = 0.0212138 Jy ! Total flux subtracted in 200 components = 0.0212138 Jy ! Clean residual min=-0.018442 max=0.018887 Jy/beam ! Clean residual mean=-0.000001 rms=0.004829 Jy/beam ! Combined flux in latest and established models = 1.58827 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 1.58827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087134Jy sigma=0.000775 ! Fit after self-cal, rms=0.087140Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268323 Jy ! Component: 100 - total flux cleaned = 0.00333843 Jy ! Component: 150 - total flux cleaned = 0.00409921 Jy ! Component: 200 - total flux cleaned = 0.00466868 Jy ! Total flux subtracted in 200 components = 0.00466868 Jy ! Clean residual min=-0.017954 max=0.018472 Jy/beam ! Clean residual mean=-0.000004 rms=0.004760 Jy/beam ! Combined flux in latest and established models = 1.59294 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 85 components and 1.59294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086624Jy sigma=0.000770 ! Fit after self-cal, rms=0.086625Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086625Jy sigma=0.000770 ! Fit after self-cal, rms=0.086307Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.237 mas, bpa=-3.471 degrees ! Estimated noise=2645.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286763 Jy ! Component: 100 - total flux cleaned = 0.00315265 Jy ! Component: 150 - total flux cleaned = 0.00354801 Jy ! Component: 200 - total flux cleaned = 0.00403433 Jy ! Total flux subtracted in 200 components = 0.00403433 Jy ! Clean residual min=-0.017294 max=0.018053 Jy/beam ! Clean residual mean=-0.000002 rms=0.004644 Jy/beam ! Combined flux in latest and established models = 1.59697 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 1.59697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085900Jy sigma=0.000766 ! Fit after self-cal, rms=0.085908Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227167 Jy ! Component: 100 - total flux cleaned = 0.000563351 Jy ! Component: 150 - total flux cleaned = 0.000877105 Jy ! Component: 200 - total flux cleaned = 0.00117115 Jy ! Total flux subtracted in 200 components = 0.00117115 Jy ! Clean residual min=-0.017138 max=0.017640 Jy/beam ! Clean residual mean=-0.000003 rms=0.004610 Jy/beam ! Combined flux in latest and established models = 1.59814 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 1.59814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085677Jy sigma=0.000763 ! Fit after self-cal, rms=0.085676Jy sigma=0.000763 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085676Jy sigma=0.000763 ! Fit after self-cal, rms=0.085576Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.967 mas, bmaj=15.74 mas, bpa=-9.68 degrees ! Estimated noise=3467.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021579 Jy ! Component: 100 - total flux cleaned = 0.00311378 Jy ! Component: 150 - total flux cleaned = 0.00345324 Jy ! Component: 200 - total flux cleaned = 0.00392607 Jy ! Total flux subtracted in 200 components = 0.00392607 Jy ! Clean residual min=-0.025885 max=0.027473 Jy/beam ! Clean residual mean=-0.000005 rms=0.008211 Jy/beam ! Combined flux in latest and established models = 1.60207 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 101 components and 1.60207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085798Jy sigma=0.000765 ! Fit after self-cal, rms=0.085628Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.67509e-05 Jy ! Component: 100 - total flux cleaned = 0.000635871 Jy ! Component: 150 - total flux cleaned = 0.000916491 Jy ! Component: 200 - total flux cleaned = 0.00117493 Jy ! Total flux subtracted in 200 components = 0.00117493 Jy ! Clean residual min=-0.025490 max=0.026901 Jy/beam ! Clean residual mean=-0.000006 rms=0.008141 Jy/beam ! Combined flux in latest and established models = 1.60324 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 107 components and 1.60324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085992Jy sigma=0.000767 ! Fit after self-cal, rms=0.085830Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.241 mas, bpa=-3.494 degrees ! Estimated noise=2642.83 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 8.241 at -3.494 degrees (North through East) ! Clean map min=-0.017186 max=1.0583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085830Jy sigma=0.000765 ! Fit after self-cal, rms=0.081034Jy sigma=0.000720 ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=8.255 mas, bpa=-3.689 degrees ! Estimated noise=2641.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165239 Jy ! Component: 100 - total flux cleaned = -0.000615795 Jy ! Component: 150 - total flux cleaned = -0.000720018 Jy ! Component: 200 - total flux cleaned = -0.000727243 Jy ! Total flux subtracted in 200 components = -0.000727243 Jy ! Clean residual min=-0.017151 max=0.016843 Jy/beam ! Clean residual mean=-0.000005 rms=0.004527 Jy/beam ! Combined flux in latest and established models = 1.60252 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 127 components and 1.60252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080783Jy sigma=0.000717 ! Fit after self-cal, rms=0.080792Jy sigma=0.000717 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.50891e-05 Jy ! Component: 100 - total flux cleaned = 0.000245827 Jy ! Component: 150 - total flux cleaned = 0.000321581 Jy ! Component: 200 - total flux cleaned = 0.000536908 Jy ! Total flux subtracted in 200 components = 0.000536908 Jy ! Clean residual min=-0.017082 max=0.016686 Jy/beam ! Clean residual mean=-0.000006 rms=0.004516 Jy/beam ! Combined flux in latest and established models = 1.60305 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 138 components and 1.60305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080671Jy sigma=0.000716 ! Fit after self-cal, rms=0.080674Jy sigma=0.000716 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080674Jy sigma=0.000716 ! Fit after self-cal, rms=0.080673Jy sigma=0.000716 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=7.42 mas, bpa=-2.546 degrees ! Estimated noise=3213.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.780436 Jy ! Component: 100 - total flux cleaned = 1.08488 Jy ! Component: 150 - total flux cleaned = 1.24533 Jy ! Component: 200 - total flux cleaned = 1.33299 Jy ! Total flux subtracted in 200 components = 1.33299 Jy ! Clean residual min=-0.033055 max=0.058343 Jy/beam ! Clean residual mean=0.000042 rms=0.010401 Jy/beam ! Combined flux in latest and established models = 1.33299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 1.33299 Jy ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.259 mas, bpa=-3.693 degrees ! Estimated noise=2642.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0758384 Jy ! Component: 100 - total flux cleaned = 0.117074 Jy ! Component: 150 - total flux cleaned = 0.144007 Jy ! Component: 200 - total flux cleaned = 0.164266 Jy ! Total flux subtracted in 200 components = 0.164266 Jy ! Clean residual min=-0.018662 max=0.023838 Jy/beam ! Clean residual mean=0.000037 rms=0.005927 Jy/beam ! Combined flux in latest and established models = 1.49725 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 1.49725 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.964 mas, bmaj=15.79 mas, bpa=-9.79 degrees ! Estimated noise=3464.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302871 Jy ! Component: 100 - total flux cleaned = 0.0500167 Jy ! Component: 150 - total flux cleaned = 0.0640706 Jy ! Component: 200 - total flux cleaned = 0.0742866 Jy ! Total flux subtracted in 200 components = 0.0742866 Jy ! Clean residual min=-0.025739 max=0.029879 Jy/beam ! Clean residual mean=0.000022 rms=0.008234 Jy/beam ! Combined flux in latest and established models = 1.57154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475595 Jy ! Component: 100 - total flux cleaned = 0.00766515 Jy ! Component: 150 - total flux cleaned = 0.00993832 Jy ! Component: 200 - total flux cleaned = 0.011712 Jy ! Total flux subtracted in 200 components = 0.011712 Jy ! Clean residual min=-0.024250 max=0.028071 Jy/beam ! Clean residual mean=0.000014 rms=0.007820 Jy/beam ! Combined flux in latest and established models = 1.58325 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 110 components and 1.58325 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.005 mas, bmaj=8.259 mas, bpa=-3.693 degrees ! Estimated noise=2642.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000555337 Jy ! Component: 100 - total flux cleaned = 0.00186904 Jy ! Component: 150 - total flux cleaned = 0.00405811 Jy ! Component: 200 - total flux cleaned = 0.00524551 Jy ! Total flux subtracted in 200 components = 0.00524551 Jy ! Clean residual min=-0.013765 max=0.017795 Jy/beam ! Clean residual mean=0.000001 rms=0.004236 Jy/beam ! Combined flux in latest and established models = 1.5885 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 1.5885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079384Jy sigma=0.000703 ! Fit after self-cal, rms=0.079028Jy sigma=0.000698 wmodel J2134-0153_S_2017_08_05_pus_map.mod ! Writing 129 model components to file: J2134-0153_S_2017_08_05_pus_map.mod wobs J2134-0153_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_08_05_pus_uvs.fits wwins J2134-0153_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J2134-0153_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060433 Jy ! Component: 100 - total flux cleaned = 0.00676297 Jy ! Component: 150 - total flux cleaned = 0.0074303 Jy ! Component: 200 - total flux cleaned = 0.00723347 Jy ! Component: 250 - total flux cleaned = 0.00627829 Jy ! Component: 300 - total flux cleaned = 0.00592536 Jy ! Component: 350 - total flux cleaned = 0.00542425 Jy ! Component: 400 - total flux cleaned = 0.0051119 Jy ! Component: 450 - total flux cleaned = 0.00450578 Jy ! Component: 500 - total flux cleaned = 0.0040708 Jy ! Component: 550 - total flux cleaned = 0.00379583 Jy ! Component: 600 - total flux cleaned = 0.00406233 Jy ! Component: 650 - total flux cleaned = 0.00419026 Jy ! Component: 700 - total flux cleaned = 0.00406894 Jy ! Component: 750 - total flux cleaned = 0.00395191 Jy ! Component: 800 - total flux cleaned = 0.00350001 Jy ! Component: 850 - total flux cleaned = 0.00328086 Jy ! Component: 900 - total flux cleaned = 0.00264703 Jy ! Component: 950 - total flux cleaned = 0.00223948 Jy ! Component: 1000 - total flux cleaned = 0.0017458 Jy ! Component: 1050 - total flux cleaned = 0.00126709 Jy ! Component: 1100 - total flux cleaned = 0.000893051 Jy ! Component: 1150 - total flux cleaned = 0.000436672 Jy ! Component: 1200 - total flux cleaned = 0.000258788 Jy ! Component: 1250 - total flux cleaned = -9.02201e-05 Jy ! Component: 1300 - total flux cleaned = -0.000343903 Jy ! Component: 1350 - total flux cleaned = -0.000674483 Jy ! Component: 1400 - total flux cleaned = -0.000994678 Jy ! Component: 1450 - total flux cleaned = -0.00123078 Jy ! Component: 1500 - total flux cleaned = -0.0014645 Jy ! Component: 1550 - total flux cleaned = -0.00161674 Jy ! Component: 1600 - total flux cleaned = -0.00169227 Jy ! Component: 1650 - total flux cleaned = -0.00183967 Jy ! Component: 1700 - total flux cleaned = -0.00184053 Jy ! Component: 1750 - total flux cleaned = -0.00191165 Jy ! Component: 1800 - total flux cleaned = -0.00177272 Jy ! Component: 1850 - total flux cleaned = -0.00163521 Jy ! Component: 1900 - total flux cleaned = -0.00136455 Jy ! Component: 1950 - total flux cleaned = -0.00136452 Jy ! Component: 2000 - total flux cleaned = -0.00123333 Jy ! Component: 2050 - total flux cleaned = -0.00123259 Jy ! Component: 2100 - total flux cleaned = -0.00123241 Jy ! Component: 2150 - total flux cleaned = -0.00123148 Jy ! Component: 2200 - total flux cleaned = -0.00116837 Jy ! Component: 2250 - total flux cleaned = -0.00135714 Jy ! Component: 2300 - total flux cleaned = -0.00135756 Jy ! Component: 2350 - total flux cleaned = -0.00142022 Jy ! Component: 2400 - total flux cleaned = -0.00160756 Jy ! Component: 2450 - total flux cleaned = -0.00160781 Jy ! Component: 2500 - total flux cleaned = -0.00179421 Jy ! Component: 2550 - total flux cleaned = -0.0018567 Jy ! Component: 2600 - total flux cleaned = -0.00198145 Jy ! Component: 2650 - total flux cleaned = -0.00216981 Jy ! Component: 2700 - total flux cleaned = -0.00229592 Jy ! Component: 2750 - total flux cleaned = -0.00248645 Jy ! Component: 2800 - total flux cleaned = -0.00261503 Jy ! Component: 2850 - total flux cleaned = -0.00280798 Jy ! Component: 2900 - total flux cleaned = -0.00287242 Jy ! Component: 2950 - total flux cleaned = -0.00306768 Jy ! Component: 3000 - total flux cleaned = -0.00319964 Jy ! Component: 3050 - total flux cleaned = -0.00346412 Jy ! Component: 3100 - total flux cleaned = -0.0035976 Jy ! Component: 3150 - total flux cleaned = -0.00373271 Jy ! Component: 3200 - total flux cleaned = -0.00393648 Jy ! Component: 3250 - total flux cleaned = -0.00407369 Jy ! Component: 3300 - total flux cleaned = -0.00435039 Jy ! Component: 3350 - total flux cleaned = -0.00456084 Jy ! Component: 3400 - total flux cleaned = -0.00470325 Jy ! Component: 3450 - total flux cleaned = -0.00484688 Jy ! Component: 3500 - total flux cleaned = -0.00484764 Jy ! Component: 3550 - total flux cleaned = -0.00492052 Jy ! Component: 3600 - total flux cleaned = -0.00499483 Jy ! Component: 3650 - total flux cleaned = -0.00514578 Jy ! Component: 3700 - total flux cleaned = -0.00522326 Jy ! Component: 3750 - total flux cleaned = -0.00530078 Jy ! Component: 3800 - total flux cleaned = -0.00545857 Jy ! Component: 3850 - total flux cleaned = -0.00553837 Jy ! Component: 3900 - total flux cleaned = -0.00553827 Jy ! Component: 3950 - total flux cleaned = -0.00561801 Jy ! Component: 4000 - total flux cleaned = -0.00578305 Jy ! Component: 4050 - total flux cleaned = -0.00595011 Jy ! Total flux subtracted in 4096 components = -0.00603549 Jy ! Clean residual min=-0.005252 max=0.004457 Jy/beam ! Clean residual mean=-0.000000 rms=0.001349 Jy/beam ! Combined flux in latest and established models = 1.58246 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 395 components and 1.58246 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 8.259 at -3.693 degrees (North through East) ! Clean map min=-0.011694 max=1.0573 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.05728 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00144476 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.409946 0.409946 0.819892 1.63978 3.27957 6.55913 13.1183 26.2365 52.4731 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0043 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.005 x 8.259 at -3.693 degrees (North through East) ! Clean map min=-0.011694 max=1.0573 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:39:52 2019