! Started logfile: J2134-0153_S_2017_07_16_pus_uvs.log on Thu May 9 11:19:39 2019 obs J2134-0153_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_07_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.415556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 748 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.478837Jy sigma=0.004319 ! Fit after self-cal, rms=0.421105Jy sigma=0.003776 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=8.637 mas, bpa=11.96 degrees ! Estimated noise=3679.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.900501 Jy ! Component: 100 - total flux cleaned = 1.20099 Jy ! Total flux subtracted in 100 components = 1.20099 Jy ! Clean residual min=-0.080998 max=0.141185 Jy/beam ! Clean residual mean=0.000276 rms=0.032494 Jy/beam ! Combined flux in latest and established models = 1.20099 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.20099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273077Jy sigma=0.002433 ! Fit after self-cal, rms=0.272804Jy sigma=0.002430 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=9.868 mas, bpa=12.26 degrees ! Estimated noise=3304.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180129 Jy ! Component: 100 - total flux cleaned = 0.26693 Jy ! Component: 150 - total flux cleaned = 0.310426 Jy ! Component: 200 - total flux cleaned = 0.333102 Jy ! Total flux subtracted in 200 components = 0.333102 Jy ! Clean residual min=-0.028229 max=0.047874 Jy/beam ! Clean residual mean=0.000092 rms=0.011671 Jy/beam ! Combined flux in latest and established models = 1.53409 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 1.53409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121681Jy sigma=0.001092 ! Fit after self-cal, rms=0.121059Jy sigma=0.001086 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.98 KP 1.05 ! LA 1.00 MK 1.00* NL 0.90 OV 1.06 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.03 KP 1.01 ! LA 0.95 MK 1.00* NL 1.05 OV 1.06 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.01 KP 0.99 ! LA 0.98 MK 1.00* NL 0.97 OV 0.98 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.121059Jy sigma=0.001086 ! Fit after self-cal, rms=0.095717Jy sigma=0.000857 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=9.872 mas, bpa=12.27 degrees ! Estimated noise=3284.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489615 Jy ! Component: 100 - total flux cleaned = 0.00490909 Jy ! Component: 150 - total flux cleaned = 0.00489973 Jy ! Component: 200 - total flux cleaned = 0.00529828 Jy ! Total flux subtracted in 200 components = 0.00529828 Jy ! Clean residual min=-0.022125 max=0.041762 Jy/beam ! Clean residual mean=0.000023 rms=0.009315 Jy/beam ! Combined flux in latest and established models = 1.53939 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 35 components and 1.53939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093696Jy sigma=0.000836 ! Fit after self-cal, rms=0.093381Jy sigma=0.000833 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093381Jy sigma=0.000833 ! Fit after self-cal, rms=0.093255Jy sigma=0.000832 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.59 mas, bmaj=9.86 mas, bpa=12.26 degrees ! Estimated noise=3280.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00324013 Jy ! Component: 100 - total flux cleaned = 0.00284846 Jy ! Component: 150 - total flux cleaned = 0.00284236 Jy ! Component: 200 - total flux cleaned = 0.00312347 Jy ! Total flux subtracted in 200 components = 0.00312347 Jy ! Clean residual min=-0.021627 max=0.039348 Jy/beam ! Clean residual mean=0.000023 rms=0.009132 Jy/beam ! Combined flux in latest and established models = 1.54251 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 1.54251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092533Jy sigma=0.000825 ! Fit after self-cal, rms=0.092463Jy sigma=0.000824 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0369269 Jy ! Component: 100 - total flux cleaned = 0.0577322 Jy ! Component: 150 - total flux cleaned = 0.0713595 Jy ! Component: 200 - total flux cleaned = 0.0815228 Jy ! Total flux subtracted in 200 components = 0.0815228 Jy ! Clean residual min=-0.014355 max=0.010538 Jy/beam ! Clean residual mean=0.000007 rms=0.004112 Jy/beam ! Combined flux in latest and established models = 1.62403 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 77 components and 1.62403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074952Jy sigma=0.000666 ! Fit after self-cal, rms=0.074582Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074582Jy sigma=0.000663 ! Fit after self-cal, rms=0.072966Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=9.872 mas, bpa=12.25 degrees ! Estimated noise=3264.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106327 Jy ! Component: 100 - total flux cleaned = 0.0172298 Jy ! Component: 150 - total flux cleaned = 0.022226 Jy ! Component: 200 - total flux cleaned = 0.0262893 Jy ! Total flux subtracted in 200 components = 0.0262893 Jy ! Clean residual min=-0.010491 max=0.008674 Jy/beam ! Clean residual mean=-0.000002 rms=0.002667 Jy/beam ! Combined flux in latest and established models = 1.65032 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 109 components and 1.65032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071018Jy sigma=0.000637 ! Fit after self-cal, rms=0.070942Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280125 Jy ! Component: 100 - total flux cleaned = 0.00396159 Jy ! Component: 150 - total flux cleaned = 0.00480033 Jy ! Component: 200 - total flux cleaned = 0.00558455 Jy ! Total flux subtracted in 200 components = 0.00558455 Jy ! Clean residual min=-0.009393 max=0.008168 Jy/beam ! Clean residual mean=-0.000005 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 1.65591 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 134 components and 1.65591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070526Jy sigma=0.000633 ! Fit after self-cal, rms=0.070509Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070509Jy sigma=0.000633 ! Fit after self-cal, rms=0.070221Jy sigma=0.000631 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.07 mas, bmaj=15.23 mas, bpa=-5.075 degrees ! Estimated noise=4111.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00615746 Jy ! Component: 100 - total flux cleaned = 0.0086017 Jy ! Component: 150 - total flux cleaned = 0.00872139 Jy ! Component: 200 - total flux cleaned = 0.00839197 Jy ! Total flux subtracted in 200 components = 0.00839197 Jy ! Clean residual min=-0.009322 max=0.007678 Jy/beam ! Clean residual mean=0.000002 rms=0.002849 Jy/beam ! Combined flux in latest and established models = 1.6643 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 1.6643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069855Jy sigma=0.000628 ! Fit after self-cal, rms=0.069823Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23786e-05 Jy ! Component: 100 - total flux cleaned = -0.000182037 Jy ! Component: 150 - total flux cleaned = -0.000367123 Jy ! Component: 200 - total flux cleaned = -0.000546011 Jy ! Total flux subtracted in 200 components = -0.000546011 Jy ! Clean residual min=-0.008487 max=0.007110 Jy/beam ! Clean residual mean=0.000002 rms=0.002600 Jy/beam ! Combined flux in latest and established models = 1.66375 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 175 components and 1.66375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069687Jy sigma=0.000627 ! Fit after self-cal, rms=0.069676Jy sigma=0.000627 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=9.873 mas, bpa=12.21 degrees ! Estimated noise=3264.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 9.873 at 12.21 degrees (North through East) ! Clean map min=-0.0074498 max=1.192 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069676Jy sigma=0.000627 ! Fit after self-cal, rms=0.063385Jy sigma=0.000566 ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=9.873 mas, bpa=12.13 degrees ! Estimated noise=3269.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129083 Jy ! Component: 100 - total flux cleaned = 0.0013034 Jy ! Component: 150 - total flux cleaned = 0.00123267 Jy ! Component: 200 - total flux cleaned = 0.00123223 Jy ! Total flux subtracted in 200 components = 0.00123223 Jy ! Clean residual min=-0.007124 max=0.005716 Jy/beam ! Clean residual mean=0.000004 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 1.66498 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 195 components and 1.66498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063179Jy sigma=0.000564 ! Fit after self-cal, rms=0.063178Jy sigma=0.000564 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293165 Jy ! Component: 100 - total flux cleaned = 0.000168474 Jy ! Component: 150 - total flux cleaned = 4.66059e-05 Jy ! Component: 200 - total flux cleaned = -0.000186991 Jy ! Total flux subtracted in 200 components = -0.000186991 Jy ! Clean residual min=-0.006915 max=0.005726 Jy/beam ! Clean residual mean=0.000004 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 1.6648 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 202 components and 1.6648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063075Jy sigma=0.000563 ! Fit after self-cal, rms=0.063074Jy sigma=0.000563 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063074Jy sigma=0.000563 ! Fit after self-cal, rms=0.063057Jy sigma=0.000563 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=8.646 mas, bpa=11.83 degrees ! Estimated noise=3627.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.887044 Jy ! Component: 100 - total flux cleaned = 1.17833 Jy ! Component: 150 - total flux cleaned = 1.33169 Jy ! Component: 200 - total flux cleaned = 1.4161 Jy ! Total flux subtracted in 200 components = 1.4161 Jy ! Clean residual min=-0.031010 max=0.041532 Jy/beam ! Clean residual mean=0.000089 rms=0.011735 Jy/beam ! Combined flux in latest and established models = 1.4161 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.4161 Jy ! Inverting map and beam ! Estimated beam: bmin=3.593 mas, bmaj=9.874 mas, bpa=12.13 degrees ! Estimated noise=3270.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060708 Jy ! Component: 100 - total flux cleaned = 0.100895 Jy ! Component: 150 - total flux cleaned = 0.130645 Jy ! Component: 200 - total flux cleaned = 0.153814 Jy ! Total flux subtracted in 200 components = 0.153814 Jy ! Clean residual min=-0.017210 max=0.017553 Jy/beam ! Clean residual mean=0.000055 rms=0.006001 Jy/beam ! Combined flux in latest and established models = 1.56991 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 68 components and 1.56991 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=15.25 mas, bpa=-5.113 degrees ! Estimated noise=4112.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307228 Jy ! Component: 100 - total flux cleaned = 0.0504862 Jy ! Component: 150 - total flux cleaned = 0.0644684 Jy ! Component: 200 - total flux cleaned = 0.0746422 Jy ! Total flux subtracted in 200 components = 0.0746422 Jy ! Clean residual min=-0.011126 max=0.008651 Jy/beam ! Clean residual mean=0.000030 rms=0.003592 Jy/beam ! Combined flux in latest and established models = 1.64455 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074767 Jy ! Component: 100 - total flux cleaned = 0.0130159 Jy ! Component: 150 - total flux cleaned = 0.0171344 Jy ! Component: 200 - total flux cleaned = 0.0201993 Jy ! Total flux subtracted in 200 components = 0.0201993 Jy ! Clean residual min=-0.008334 max=0.006728 Jy/beam ! Clean residual mean=0.000007 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 1.66475 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 109 components and 1.66475 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.593 mas, bmaj=9.874 mas, bpa=12.13 degrees ! Estimated noise=3270.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00387396 Jy ! Component: 100 - total flux cleaned = 0.00410002 Jy ! Component: 150 - total flux cleaned = 0.00375175 Jy ! Component: 200 - total flux cleaned = 0.00361659 Jy ! Total flux subtracted in 200 components = 0.00361659 Jy ! Clean residual min=-0.007728 max=0.006623 Jy/beam ! Clean residual mean=0.000003 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 1.66837 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 122 components and 1.66837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063677Jy sigma=0.000569 ! Fit after self-cal, rms=0.063629Jy sigma=0.000568 wmodel J2134-0153_S_2017_07_16_pus_map.mod ! Writing 122 model components to file: J2134-0153_S_2017_07_16_pus_map.mod wobs J2134-0153_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_07_16_pus_uvs.fits wwins J2134-0153_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J2134-0153_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0021024 Jy ! Component: 100 - total flux cleaned = -0.00339159 Jy ! Component: 150 - total flux cleaned = -0.00435198 Jy ! Component: 200 - total flux cleaned = -0.005131 Jy ! Component: 250 - total flux cleaned = -0.00575853 Jy ! Component: 300 - total flux cleaned = -0.00608901 Jy ! Component: 350 - total flux cleaned = -0.0062476 Jy ! Component: 400 - total flux cleaned = -0.00647079 Jy ! Component: 450 - total flux cleaned = -0.00661139 Jy ! Component: 500 - total flux cleaned = -0.00681513 Jy ! Component: 550 - total flux cleaned = -0.00681692 Jy ! Component: 600 - total flux cleaned = -0.00700319 Jy ! Component: 650 - total flux cleaned = -0.00706316 Jy ! Component: 700 - total flux cleaned = -0.00723285 Jy ! Component: 750 - total flux cleaned = -0.00723393 Jy ! Component: 800 - total flux cleaned = -0.0074424 Jy ! Component: 850 - total flux cleaned = -0.00754237 Jy ! Component: 900 - total flux cleaned = -0.00763957 Jy ! Component: 950 - total flux cleaned = -0.00768766 Jy ! Component: 1000 - total flux cleaned = -0.00782571 Jy ! Component: 1050 - total flux cleaned = -0.00787022 Jy ! Component: 1100 - total flux cleaned = -0.00795718 Jy ! Component: 1150 - total flux cleaned = -0.00804223 Jy ! Component: 1200 - total flux cleaned = -0.00808382 Jy ! Component: 1250 - total flux cleaned = -0.00804349 Jy ! Component: 1300 - total flux cleaned = -0.00820279 Jy ! Component: 1350 - total flux cleaned = -0.00820211 Jy ! Component: 1400 - total flux cleaned = -0.00824055 Jy ! Component: 1450 - total flux cleaned = -0.00827857 Jy ! Component: 1500 - total flux cleaned = -0.00835391 Jy ! Component: 1550 - total flux cleaned = -0.00842814 Jy ! Component: 1600 - total flux cleaned = -0.00842835 Jy ! Component: 1650 - total flux cleaned = -0.00850131 Jy ! Component: 1700 - total flux cleaned = -0.00853741 Jy ! Component: 1750 - total flux cleaned = -0.00857325 Jy ! Component: 1800 - total flux cleaned = -0.00860883 Jy ! Component: 1850 - total flux cleaned = -0.00860865 Jy ! Component: 1900 - total flux cleaned = -0.00860853 Jy ! Component: 1950 - total flux cleaned = -0.00843488 Jy ! Component: 2000 - total flux cleaned = -0.00850379 Jy ! Component: 2050 - total flux cleaned = -0.00846947 Jy ! Component: 2100 - total flux cleaned = -0.00846969 Jy ! Component: 2150 - total flux cleaned = -0.00836743 Jy ! Component: 2200 - total flux cleaned = -0.0083334 Jy ! Component: 2250 - total flux cleaned = -0.00829913 Jy ! Component: 2300 - total flux cleaned = -0.00826509 Jy ! Component: 2350 - total flux cleaned = -0.00823099 Jy ! Component: 2400 - total flux cleaned = -0.00823103 Jy ! Component: 2450 - total flux cleaned = -0.00816282 Jy ! Component: 2500 - total flux cleaned = -0.00816279 Jy ! Component: 2550 - total flux cleaned = -0.00816279 Jy ! Component: 2600 - total flux cleaned = -0.00812875 Jy ! Component: 2650 - total flux cleaned = -0.00812857 Jy ! Component: 2700 - total flux cleaned = -0.00819754 Jy ! Component: 2750 - total flux cleaned = -0.00823218 Jy ! Component: 2800 - total flux cleaned = -0.00823239 Jy ! Component: 2850 - total flux cleaned = -0.00823225 Jy ! Component: 2900 - total flux cleaned = -0.00823217 Jy ! Component: 2950 - total flux cleaned = -0.00819675 Jy ! Component: 3000 - total flux cleaned = -0.00816119 Jy ! Component: 3050 - total flux cleaned = -0.00812551 Jy ! Component: 3100 - total flux cleaned = -0.00819726 Jy ! Component: 3150 - total flux cleaned = -0.00812507 Jy ! Component: 3200 - total flux cleaned = -0.00812504 Jy ! Component: 3250 - total flux cleaned = -0.00812482 Jy ! Component: 3300 - total flux cleaned = -0.00808726 Jy ! Component: 3350 - total flux cleaned = -0.00808702 Jy ! Component: 3400 - total flux cleaned = -0.00797295 Jy ! Component: 3450 - total flux cleaned = -0.00801074 Jy ! Component: 3500 - total flux cleaned = -0.00801075 Jy ! Component: 3550 - total flux cleaned = -0.00789385 Jy ! Component: 3600 - total flux cleaned = -0.00785402 Jy ! Component: 3650 - total flux cleaned = -0.00785397 Jy ! Component: 3700 - total flux cleaned = -0.00785424 Jy ! Component: 3750 - total flux cleaned = -0.007732 Jy ! Component: 3800 - total flux cleaned = -0.00773162 Jy ! Component: 3850 - total flux cleaned = -0.00777322 Jy ! Component: 3900 - total flux cleaned = -0.00764738 Jy ! Component: 3950 - total flux cleaned = -0.00764777 Jy ! Component: 4000 - total flux cleaned = -0.00760512 Jy ! Component: 4050 - total flux cleaned = -0.00756212 Jy ! Total flux subtracted in 4096 components = -0.00747433 Jy ! Clean residual min=-0.002215 max=0.002893 Jy/beam ! Clean residual mean=-0.000004 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 1.66089 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 361 components and 1.66089 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.593 x 9.874 at 12.13 degrees (North through East) ! Clean map min=-0.0084743 max=1.1964 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.19643 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000783048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.196346 0.196346 0.392692 0.785384 1.57077 3.14154 6.28307 12.5661 25.1323 50.2646 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.196 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.593 x 9.874 at 12.13 degrees (North through East) ! Clean map min=-0.0084743 max=1.1964 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:19:45 2019