! Started logfile: J2134-0153_S_2017_06_15_pus_uvs.log on Tue May 7 15:28:36 2019 obs J2134-0153_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_06_15_pus_uva.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.447343 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 187 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.488508Jy sigma=0.003780 ! Fit after self-cal, rms=0.444335Jy sigma=0.003411 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=7.091 mas, bpa=-5.095 degrees ! Estimated noise=2698.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.677274 Jy ! Component: 100 - total flux cleaned = 0.927277 Jy ! Total flux subtracted in 100 components = 0.927277 Jy ! Clean residual min=-0.071560 max=0.143487 Jy/beam ! Clean residual mean=-0.000489 rms=0.026133 Jy/beam ! Combined flux in latest and established models = 0.927277 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.927277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353683Jy sigma=0.002964 ! Fit after self-cal, rms=0.353396Jy sigma=0.002962 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=7.447 mas, bpa=-1.239 degrees ! Estimated noise=2319.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173851 Jy ! Component: 100 - total flux cleaned = 0.269465 Jy ! Component: 150 - total flux cleaned = 0.324901 Jy ! Component: 200 - total flux cleaned = 0.358472 Jy ! Total flux subtracted in 200 components = 0.358472 Jy ! Clean residual min=-0.054523 max=0.117689 Jy/beam ! Clean residual mean=-0.000377 rms=0.019887 Jy/beam ! Combined flux in latest and established models = 1.28575 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 39 components and 1.28575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.269728Jy sigma=0.002071 ! Fit after self-cal, rms=0.269586Jy sigma=0.002070 ! Inverting map ! Added new window around map position (74.5, -66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104932 Jy ! Component: 100 - total flux cleaned = 0.15108 Jy ! Component: 150 - total flux cleaned = 0.163389 Jy ! Component: 200 - total flux cleaned = 0.164521 Jy ! Total flux subtracted in 200 components = 0.164521 Jy ! Clean residual min=-0.054194 max=0.072089 Jy/beam ! Clean residual mean=-0.000216 rms=0.014060 Jy/beam ! Combined flux in latest and established models = 1.45027 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 69 components and 1.45027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225377Jy sigma=0.001682 ! Fit after self-cal, rms=0.219112Jy sigma=0.001618 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 1.30 KP 1.04 ! LA 0.96 MK 0.99 NL 0.86 OV 1.02 ! PT 1.02 SC 0.90 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.96 HN 1.29 KP 0.98 ! LA 0.92 MK 0.99 NL 1.03 OV 1.04 ! PT 0.99 SC 1.65 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 1.25 KP 0.99 ! LA 0.94 MK 0.98 NL 1.04 OV 0.96 ! PT 0.96 SC 1.36 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.53 KP 1.00* ! LA 0.99 MK 1.05 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.219112Jy sigma=0.001618 ! Fit after self-cal, rms=0.183280Jy sigma=0.001190 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=7.938 mas, bpa=-4.665 degrees ! Estimated noise=2486.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00517872 Jy ! Component: 100 - total flux cleaned = -0.00568929 Jy ! Component: 150 - total flux cleaned = -0.00740893 Jy ! Component: 200 - total flux cleaned = -0.00921673 Jy ! Total flux subtracted in 200 components = -0.00921673 Jy ! Clean residual min=-0.030548 max=0.034301 Jy/beam ! Clean residual mean=-0.000133 rms=0.008669 Jy/beam ! Combined flux in latest and established models = 1.44105 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 1.44105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180413Jy sigma=0.001167 ! Fit after self-cal, rms=0.180324Jy sigma=0.001164 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180324Jy sigma=0.001164 ! Fit after self-cal, rms=0.180047Jy sigma=0.001162 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=7.952 mas, bpa=-4.858 degrees ! Estimated noise=2482.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00329952 Jy ! Component: 100 - total flux cleaned = -0.00441748 Jy ! Component: 150 - total flux cleaned = -0.00602994 Jy ! Component: 200 - total flux cleaned = -0.00687802 Jy ! Total flux subtracted in 200 components = -0.00687802 Jy ! Clean residual min=-0.029428 max=0.033114 Jy/beam ! Clean residual mean=-0.000138 rms=0.008473 Jy/beam ! Combined flux in latest and established models = 1.43417 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 1.43417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178568Jy sigma=0.001151 ! Fit after self-cal, rms=0.178485Jy sigma=0.001150 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112452 Jy ! Component: 100 - total flux cleaned = -0.000665572 Jy ! Component: 150 - total flux cleaned = -0.00112315 Jy ! Component: 200 - total flux cleaned = -0.00111946 Jy ! Total flux subtracted in 200 components = -0.00111946 Jy ! Clean residual min=-0.029113 max=0.032339 Jy/beam ! Clean residual mean=-0.000143 rms=0.008411 Jy/beam ! Combined flux in latest and established models = 1.43306 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 1.43306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177707Jy sigma=0.001145 ! Fit after self-cal, rms=0.177731Jy sigma=0.001145 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177731Jy sigma=0.001145 ! Fit after self-cal, rms=0.152129Jy sigma=0.000946 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=8.037 mas, bpa=-5.683 degrees ! Estimated noise=2515.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0174464 Jy ! Component: 100 - total flux cleaned = -0.0196152 Jy ! Component: 150 - total flux cleaned = -0.0206956 Jy ! Component: 200 - total flux cleaned = -0.0212913 Jy ! Total flux subtracted in 200 components = -0.0212913 Jy ! Clean residual min=-0.025088 max=0.033142 Jy/beam ! Clean residual mean=-0.000178 rms=0.007169 Jy/beam ! Combined flux in latest and established models = 1.41176 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 1.41176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147920Jy sigma=0.000929 ! Fit after self-cal, rms=0.147327Jy sigma=0.000926 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304767 Jy ! Component: 100 - total flux cleaned = 0.042576 Jy ! Component: 150 - total flux cleaned = 0.0478064 Jy ! Component: 200 - total flux cleaned = 0.0509995 Jy ! Total flux subtracted in 200 components = 0.0509995 Jy ! Clean residual min=-0.020395 max=0.024226 Jy/beam ! Clean residual mean=-0.000061 rms=0.005495 Jy/beam ! Combined flux in latest and established models = 1.46276 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 161 components and 1.46276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140074Jy sigma=0.000852 ! Fit after self-cal, rms=0.139440Jy sigma=0.000843 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139440Jy sigma=0.000843 ! Fit after self-cal, rms=0.139450Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.331 mas, bmaj=13.34 mas, bpa=15.57 degrees ! Estimated noise=2892.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485039 Jy ! Component: 100 - total flux cleaned = 0.00699072 Jy ! Component: 150 - total flux cleaned = 0.0086596 Jy ! Component: 200 - total flux cleaned = 0.0107726 Jy ! Total flux subtracted in 200 components = 0.0107726 Jy ! Clean residual min=-0.019978 max=0.022850 Jy/beam ! Clean residual mean=-0.000084 rms=0.005772 Jy/beam ! Combined flux in latest and established models = 1.47354 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 186 components and 1.47354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136119Jy sigma=0.000808 ! Fit after self-cal, rms=0.135698Jy sigma=0.000804 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274035 Jy ! Component: 100 - total flux cleaned = 0.0040842 Jy ! Component: 150 - total flux cleaned = 0.00554786 Jy ! Component: 200 - total flux cleaned = 0.00707201 Jy ! Total flux subtracted in 200 components = 0.00707201 Jy ! Clean residual min=-0.017645 max=0.018580 Jy/beam ! Clean residual mean=-0.000033 rms=0.005074 Jy/beam ! Combined flux in latest and established models = 1.48061 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 209 components and 1.48061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134646Jy sigma=0.000797 ! Fit after self-cal, rms=0.134465Jy sigma=0.000796 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.859 mas, bmaj=8.041 mas, bpa=-5.609 degrees ! Estimated noise=2510.99 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.859 x 8.041 at -5.609 degrees (North through East) ! Clean map min=-0.016274 max=0.9003 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134465Jy sigma=0.000796 ! Fit after self-cal, rms=0.127500Jy sigma=0.000718 ! Inverting map and beam ! Estimated beam: bmin=3.85 mas, bmaj=8.027 mas, bpa=-5.629 degrees ! Estimated noise=2504.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00668816 Jy ! Component: 100 - total flux cleaned = -0.00556451 Jy ! Component: 150 - total flux cleaned = -0.00338288 Jy ! Component: 200 - total flux cleaned = -0.00187682 Jy ! Total flux subtracted in 200 components = -0.00187682 Jy ! Clean residual min=-0.014392 max=0.013364 Jy/beam ! Clean residual mean=-0.000034 rms=0.003599 Jy/beam ! Combined flux in latest and established models = 1.47873 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 230 components and 1.47873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125609Jy sigma=0.000706 ! Fit after self-cal, rms=0.125397Jy sigma=0.000705 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000695176 Jy ! Component: 100 - total flux cleaned = 0.000468161 Jy ! Component: 150 - total flux cleaned = 0.00171042 Jy ! Component: 200 - total flux cleaned = 0.00236723 Jy ! Total flux subtracted in 200 components = 0.00236723 Jy ! Clean residual min=-0.013787 max=0.012966 Jy/beam ! Clean residual mean=-0.000023 rms=0.003469 Jy/beam ! Combined flux in latest and established models = 1.4811 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 240 components and 1.4811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124620Jy sigma=0.000701 ! Fit after self-cal, rms=0.124553Jy sigma=0.000701 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124553Jy sigma=0.000701 ! Fit after self-cal, rms=0.125243Jy sigma=0.000697 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.241 mas, bmaj=7.644 mas, bpa=-8.269 degrees ! Estimated noise=2931.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.710917 Jy ! Component: 100 - total flux cleaned = 0.968491 Jy ! Component: 150 - total flux cleaned = 1.09954 Jy ! Component: 200 - total flux cleaned = 1.17778 Jy ! Total flux subtracted in 200 components = 1.17778 Jy ! Clean residual min=-0.028983 max=0.051516 Jy/beam ! Clean residual mean=-0.000276 rms=0.010118 Jy/beam ! Combined flux in latest and established models = 1.17778 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 1.17778 Jy ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=8.039 mas, bpa=-5.663 degrees ! Estimated noise=2504.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0720137 Jy ! Component: 100 - total flux cleaned = 0.121667 Jy ! Component: 150 - total flux cleaned = 0.158693 Jy ! Component: 200 - total flux cleaned = 0.187294 Jy ! Total flux subtracted in 200 components = 0.187294 Jy ! Clean residual min=-0.017609 max=0.028057 Jy/beam ! Clean residual mean=-0.000250 rms=0.005798 Jy/beam ! Combined flux in latest and established models = 1.36507 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 101 components and 1.36507 Jy ! Inverting map ! Added new window around map position (44.5, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267072 Jy ! Component: 100 - total flux cleaned = 0.044128 Jy ! Component: 150 - total flux cleaned = 0.0575658 Jy ! Component: 200 - total flux cleaned = 0.0684949 Jy ! Total flux subtracted in 200 components = 0.0684949 Jy ! Clean residual min=-0.014537 max=0.013596 Jy/beam ! Clean residual mean=-0.000118 rms=0.003705 Jy/beam ! Combined flux in latest and established models = 1.43357 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 150 components and 1.43357 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.353 mas, bmaj=13.36 mas, bpa=15.55 degrees ! Estimated noise=2885 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139458 Jy ! Component: 100 - total flux cleaned = 0.0237202 Jy ! Component: 150 - total flux cleaned = 0.0298358 Jy ! Component: 200 - total flux cleaned = 0.0316637 Jy ! Total flux subtracted in 200 components = 0.0316637 Jy ! Clean residual min=-0.016034 max=0.018716 Jy/beam ! Clean residual mean=-0.000095 rms=0.004175 Jy/beam ! Combined flux in latest and established models = 1.46523 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.5, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155815 Jy ! Component: 100 - total flux cleaned = 0.0193782 Jy ! Component: 150 - total flux cleaned = 0.0213153 Jy ! Component: 200 - total flux cleaned = 0.0227622 Jy ! Total flux subtracted in 200 components = 0.0227622 Jy ! Clean residual min=-0.012325 max=0.009128 Jy/beam ! Clean residual mean=-0.000002 rms=0.002873 Jy/beam ! Combined flux in latest and established models = 1.48799 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 226 components and 1.48799 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.855 mas, bmaj=8.039 mas, bpa=-5.663 degrees ! Estimated noise=2504.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147674 Jy ! Component: 100 - total flux cleaned = 0.00199555 Jy ! Component: 150 - total flux cleaned = 0.00174413 Jy ! Component: 200 - total flux cleaned = 0.00174571 Jy ! Total flux subtracted in 200 components = 0.00174571 Jy ! Clean residual min=-0.009737 max=0.008392 Jy/beam ! Clean residual mean=0.000004 rms=0.002328 Jy/beam ! Combined flux in latest and established models = 1.48974 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 252 components and 1.48974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119451Jy sigma=0.000665 ! Fit after self-cal, rms=0.119205Jy sigma=0.000663 wmodel J2134-0153_S_2017_06_15_pus_map.mod ! Writing 252 model components to file: J2134-0153_S_2017_06_15_pus_map.mod wobs J2134-0153_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_06_15_pus_uvs.fits wwins J2134-0153_S_2017_06_15_pus_map.win ! wwins: Wrote 6 windows to J2134-0153_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197989 Jy ! Component: 100 - total flux cleaned = -0.00369845 Jy ! Component: 150 - total flux cleaned = -0.00503185 Jy ! Component: 200 - total flux cleaned = -0.0061652 Jy ! Component: 250 - total flux cleaned = -0.00772513 Jy ! Component: 300 - total flux cleaned = -0.00922427 Jy ! Component: 350 - total flux cleaned = -0.0105543 Jy ! Component: 400 - total flux cleaned = -0.0118349 Jy ! Component: 450 - total flux cleaned = -0.0128635 Jy ! Component: 500 - total flux cleaned = -0.0138583 Jy ! Component: 550 - total flux cleaned = -0.014534 Jy ! Component: 600 - total flux cleaned = -0.0149093 Jy ! Component: 650 - total flux cleaned = -0.0154534 Jy ! Component: 700 - total flux cleaned = -0.0156271 Jy ! Component: 750 - total flux cleaned = -0.0158833 Jy ! Component: 800 - total flux cleaned = -0.0163008 Jy ! Component: 850 - total flux cleaned = -0.0163809 Jy ! Component: 900 - total flux cleaned = -0.0168548 Jy ! Component: 950 - total flux cleaned = -0.0170085 Jy ! Component: 1000 - total flux cleaned = -0.0175385 Jy ! Component: 1050 - total flux cleaned = -0.0179071 Jy ! Component: 1100 - total flux cleaned = -0.0182681 Jy ! Component: 1150 - total flux cleaned = -0.0187625 Jy ! Component: 1200 - total flux cleaned = -0.019107 Jy ! Component: 1250 - total flux cleaned = -0.0193769 Jy ! Component: 1300 - total flux cleaned = -0.0197102 Jy ! Component: 1350 - total flux cleaned = -0.019971 Jy ! Component: 1400 - total flux cleaned = -0.0202289 Jy ! Component: 1450 - total flux cleaned = -0.020483 Jy ! Component: 1500 - total flux cleaned = -0.020856 Jy ! Component: 1550 - total flux cleaned = -0.0209773 Jy ! Component: 1600 - total flux cleaned = -0.0210975 Jy ! Component: 1650 - total flux cleaned = -0.021098 Jy ! Component: 1700 - total flux cleaned = -0.0208657 Jy ! Component: 1750 - total flux cleaned = -0.0209242 Jy ! Component: 1800 - total flux cleaned = -0.0208111 Jy ! Component: 1850 - total flux cleaned = -0.0207546 Jy ! Component: 1900 - total flux cleaned = -0.020644 Jy ! Component: 1950 - total flux cleaned = -0.0206436 Jy ! Component: 2000 - total flux cleaned = -0.0204272 Jy ! Component: 2050 - total flux cleaned = -0.0202145 Jy ! Component: 2100 - total flux cleaned = -0.0201615 Jy ! Component: 2150 - total flux cleaned = -0.0201093 Jy ! Component: 2200 - total flux cleaned = -0.0201605 Jy ! Component: 2250 - total flux cleaned = -0.0201094 Jy ! Component: 2300 - total flux cleaned = -0.0201098 Jy ! Component: 2350 - total flux cleaned = -0.0201606 Jy ! Component: 2400 - total flux cleaned = -0.0201604 Jy ! Component: 2450 - total flux cleaned = -0.0202094 Jy ! Component: 2500 - total flux cleaned = -0.0204038 Jy ! Component: 2550 - total flux cleaned = -0.0206922 Jy ! Component: 2600 - total flux cleaned = -0.0206922 Jy ! Component: 2650 - total flux cleaned = -0.021023 Jy ! Component: 2700 - total flux cleaned = -0.0211635 Jy ! Component: 2750 - total flux cleaned = -0.0215352 Jy ! Component: 2800 - total flux cleaned = -0.0217196 Jy ! Component: 2850 - total flux cleaned = -0.0220394 Jy ! Component: 2900 - total flux cleaned = -0.0222203 Jy ! Component: 2950 - total flux cleaned = -0.02249 Jy ! Component: 3000 - total flux cleaned = -0.0227132 Jy ! Component: 3050 - total flux cleaned = -0.0229353 Jy ! Component: 3100 - total flux cleaned = -0.0231995 Jy ! Component: 3150 - total flux cleaned = -0.0233747 Jy ! Component: 3200 - total flux cleaned = -0.0235921 Jy ! Component: 3250 - total flux cleaned = -0.0237216 Jy ! Component: 3300 - total flux cleaned = -0.0238078 Jy ! Component: 3350 - total flux cleaned = -0.0240214 Jy ! Component: 3400 - total flux cleaned = -0.0241064 Jy ! Component: 3450 - total flux cleaned = -0.0242337 Jy ! Component: 3500 - total flux cleaned = -0.0244021 Jy ! Component: 3550 - total flux cleaned = -0.0244441 Jy ! Component: 3600 - total flux cleaned = -0.0246116 Jy ! Component: 3650 - total flux cleaned = -0.0248201 Jy ! Component: 3700 - total flux cleaned = -0.0249032 Jy ! Component: 3750 - total flux cleaned = -0.0251518 Jy ! Component: 3800 - total flux cleaned = -0.0252344 Jy ! Component: 3850 - total flux cleaned = -0.025358 Jy ! Component: 3900 - total flux cleaned = -0.0254809 Jy ! Component: 3950 - total flux cleaned = -0.0256036 Jy ! Component: 4000 - total flux cleaned = -0.0258075 Jy ! Component: 4050 - total flux cleaned = -0.0258076 Jy ! Total flux subtracted in 4096 components = -0.0260511 Jy ! Clean residual min=-0.002140 max=0.002091 Jy/beam ! Clean residual mean=-0.000002 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 1.46369 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 517 components and 1.46369 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.855 x 8.039 at -5.663 degrees (North through East) ! Clean map min=-0.008423 max=0.90837 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.908369 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00067953 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.224423 0.224423 0.448846 0.897693 1.79539 3.59077 7.18154 14.3631 28.7262 57.4523 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.908 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.855 x 8.039 at -5.663 degrees (North through East) ! Clean map min=-0.008423 max=0.90837 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:28:41 2019