! Started logfile: J2134-0153_S_2017_04_28_pus_uvs.log on Thu May 2 16:34:03 2019 obs J2134-0153_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_04_28_pus_uva.fits ! AN table 1: 34 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.411765 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 2520 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 253 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.582274Jy sigma=0.004047 ! Fit after self-cal, rms=0.569976Jy sigma=0.003939 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.048 mas, bmaj=11.14 mas, bpa=21.93 degrees ! Estimated noise=2454.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0307 Jy ! Component: 100 - total flux cleaned = 1.34266 Jy ! Total flux subtracted in 100 components = 1.34266 Jy ! Clean residual min=-0.059360 max=0.131619 Jy/beam ! Clean residual mean=0.000050 rms=0.022657 Jy/beam ! Combined flux in latest and established models = 1.34266 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.34266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367337Jy sigma=0.002096 ! Fit after self-cal, rms=0.366442Jy sigma=0.002090 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.717 mas, bmaj=11.86 mas, bpa=21.37 degrees ! Estimated noise=2044.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156059 Jy ! Component: 100 - total flux cleaned = 0.225839 Jy ! Component: 150 - total flux cleaned = 0.259839 Jy ! Component: 200 - total flux cleaned = 0.279501 Jy ! Total flux subtracted in 200 components = 0.279501 Jy ! Clean residual min=-0.044472 max=0.046822 Jy/beam ! Clean residual mean=0.000045 rms=0.012313 Jy/beam ! Combined flux in latest and established models = 1.62216 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 48 components and 1.62216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283991Jy sigma=0.001416 ! Fit after self-cal, rms=0.283466Jy sigma=0.001411 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.99 KP 1.00 ! LA 1.04 MK 1.00* NL 0.94 OV 1.02 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.04 KP 0.97 ! LA 1.01 MK 1.00* NL 1.09 OV 1.06 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.93 HN 1.02 KP 1.02 ! LA 1.04 MK 1.00* NL 1.01 OV 0.95 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 0.99 KP 1.00* ! LA 0.53 MK 1.00* NL 1.00* OV 1.00* ! PT 1.06 SC 1.00* ! ! ! Fit before self-cal, rms=0.283466Jy sigma=0.001411 ! Fit after self-cal, rms=0.125170Jy sigma=0.000945 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.729 mas, bmaj=11.89 mas, bpa=21.46 degrees ! Estimated noise=2031.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.03787 Jy ! Component: 100 - total flux cleaned = 0.057934 Jy ! Component: 150 - total flux cleaned = 0.0687761 Jy ! Component: 200 - total flux cleaned = 0.0764988 Jy ! Total flux subtracted in 200 components = 0.0764988 Jy ! Clean residual min=-0.011286 max=0.017632 Jy/beam ! Clean residual mean=0.000010 rms=0.003810 Jy/beam ! Combined flux in latest and established models = 1.69866 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 105 components and 1.69866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113532Jy sigma=0.000834 ! Fit after self-cal, rms=0.113009Jy sigma=0.000829 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113009Jy sigma=0.000829 ! Fit after self-cal, rms=0.112394Jy sigma=0.000824 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.732 mas, bmaj=11.88 mas, bpa=21.42 degrees ! Estimated noise=2024.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012812 Jy ! Component: 100 - total flux cleaned = 0.0200571 Jy ! Component: 150 - total flux cleaned = 0.0244473 Jy ! Component: 200 - total flux cleaned = 0.0272574 Jy ! Total flux subtracted in 200 components = 0.0272574 Jy ! Clean residual min=-0.007682 max=0.009478 Jy/beam ! Clean residual mean=0.000003 rms=0.002476 Jy/beam ! Combined flux in latest and established models = 1.72591 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 139 components and 1.72591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110621Jy sigma=0.000807 ! Fit after self-cal, rms=0.110536Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297915 Jy ! Component: 100 - total flux cleaned = 0.00415504 Jy ! Component: 150 - total flux cleaned = 0.00538309 Jy ! Component: 200 - total flux cleaned = 0.00632391 Jy ! Total flux subtracted in 200 components = 0.00632391 Jy ! Clean residual min=-0.006376 max=0.007556 Jy/beam ! Clean residual mean=0.000000 rms=0.002072 Jy/beam ! Combined flux in latest and established models = 1.73224 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 165 components and 1.73224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109989Jy sigma=0.000801 ! Fit after self-cal, rms=0.109967Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109967Jy sigma=0.000800 ! Fit after self-cal, rms=0.109964Jy sigma=0.000800 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.734 mas, bmaj=11.88 mas, bpa=21.41 degrees ! Estimated noise=2024.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434249 Jy ! Component: 100 - total flux cleaned = 0.00601754 Jy ! Component: 150 - total flux cleaned = 0.00711654 Jy ! Component: 200 - total flux cleaned = 0.00800802 Jy ! Total flux subtracted in 200 components = 0.00800802 Jy ! Clean residual min=-0.005721 max=0.007199 Jy/beam ! Clean residual mean=-0.000001 rms=0.001786 Jy/beam ! Combined flux in latest and established models = 1.74025 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 189 components and 1.74025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109664Jy sigma=0.000797 ! Fit after self-cal, rms=0.109648Jy sigma=0.000797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109936 Jy ! Component: 100 - total flux cleaned = 0.001809 Jy ! Component: 150 - total flux cleaned = 0.00227509 Jy ! Component: 200 - total flux cleaned = 0.00253557 Jy ! Total flux subtracted in 200 components = 0.00253557 Jy ! Clean residual min=-0.005353 max=0.006977 Jy/beam ! Clean residual mean=-0.000003 rms=0.001655 Jy/beam ! Combined flux in latest and established models = 1.74278 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 200 components and 1.74278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109494Jy sigma=0.000795 ! Fit after self-cal, rms=0.109488Jy sigma=0.000795 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109488Jy sigma=0.000795 ! Fit after self-cal, rms=0.109478Jy sigma=0.000795 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=13.63 mas, bpa=10.49 degrees ! Estimated noise=2190.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366517 Jy ! Component: 100 - total flux cleaned = 0.00490033 Jy ! Component: 150 - total flux cleaned = 0.00481104 Jy ! Component: 200 - total flux cleaned = 0.00473512 Jy ! Total flux subtracted in 200 components = 0.00473512 Jy ! Clean residual min=-0.005802 max=0.006990 Jy/beam ! Clean residual mean=-0.000003 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 1.74752 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 222 components and 1.74752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109411Jy sigma=0.000794 ! Fit after self-cal, rms=0.109405Jy sigma=0.000794 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970888 Jy ! Component: 100 - total flux cleaned = 0.000903335 Jy ! Component: 150 - total flux cleaned = 0.000711228 Jy ! Component: 200 - total flux cleaned = 0.000537212 Jy ! Total flux subtracted in 200 components = 0.000537212 Jy ! Clean residual min=-0.005661 max=0.006648 Jy/beam ! Clean residual mean=-0.000004 rms=0.001721 Jy/beam ! Combined flux in latest and established models = 1.74805 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 237 components and 1.74805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109366Jy sigma=0.000794 ! Fit after self-cal, rms=0.109364Jy sigma=0.000794 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.733 mas, bmaj=11.88 mas, bpa=21.41 degrees ! Estimated noise=2024.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.733 x 11.88 at 21.41 degrees (North through East) ! Clean map min=-0.007532 max=1.348 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109364Jy sigma=0.000794 ! Fit after self-cal, rms=0.087300Jy sigma=0.000629 ! Inverting map and beam ! Estimated beam: bmin=4.733 mas, bmaj=11.88 mas, bpa=21.4 degrees ! Estimated noise=2024.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000362768 Jy ! Component: 100 - total flux cleaned = 3.3719e-05 Jy ! Component: 150 - total flux cleaned = 0.000103473 Jy ! Component: 200 - total flux cleaned = 0.000101566 Jy ! Total flux subtracted in 200 components = 0.000101566 Jy ! Clean residual min=-0.004973 max=0.005823 Jy/beam ! Clean residual mean=-0.000004 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 1.74816 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 256 components and 1.74816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087169Jy sigma=0.000628 ! Fit after self-cal, rms=0.087165Jy sigma=0.000628 ! Inverting map ! Added new window around map position (1, 121). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438643 Jy ! Component: 100 - total flux cleaned = 0.00565041 Jy ! Component: 150 - total flux cleaned = 0.00667091 Jy ! Component: 200 - total flux cleaned = 0.0076282 Jy ! Total flux subtracted in 200 components = 0.0076282 Jy ! Clean residual min=-0.004432 max=0.005150 Jy/beam ! Clean residual mean=-0.000003 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 1.75578 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 272 components and 1.75578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086862Jy sigma=0.000626 ! Fit after self-cal, rms=0.086854Jy sigma=0.000626 ! Inverting map ! Added new window around map position (91, 96.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0042881 Jy ! Component: 100 - total flux cleaned = 0.00600307 Jy ! Component: 150 - total flux cleaned = 0.00747068 Jy ! Component: 200 - total flux cleaned = 0.00889981 Jy ! Total flux subtracted in 200 components = 0.00889981 Jy ! Clean residual min=-0.003816 max=0.003434 Jy/beam ! Clean residual mean=-0.000002 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 1.76468 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 306 components and 1.76468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086612Jy sigma=0.000624 ! Fit after self-cal, rms=0.086598Jy sigma=0.000624 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086598Jy sigma=0.000624 ! Fit after self-cal, rms=0.086503Jy sigma=0.000624 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.064 mas, bmaj=11.18 mas, bpa=22.05 degrees ! Estimated noise=2425.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.0183 Jy ! Component: 100 - total flux cleaned = 1.32439 Jy ! Component: 150 - total flux cleaned = 1.45965 Jy ! Component: 200 - total flux cleaned = 1.52537 Jy ! Total flux subtracted in 200 components = 1.52537 Jy ! Clean residual min=-0.022286 max=0.031648 Jy/beam ! Clean residual mean=0.000042 rms=0.007493 Jy/beam ! Combined flux in latest and established models = 1.52537 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.52537 Jy ! Inverting map and beam ! Estimated beam: bmin=4.733 mas, bmaj=11.88 mas, bpa=21.41 degrees ! Estimated noise=2023.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.051911 Jy ! Component: 100 - total flux cleaned = 0.0877351 Jy ! Component: 150 - total flux cleaned = 0.114605 Jy ! Component: 200 - total flux cleaned = 0.135203 Jy ! Total flux subtracted in 200 components = 0.135203 Jy ! Clean residual min=-0.012566 max=0.015007 Jy/beam ! Clean residual mean=0.000033 rms=0.004325 Jy/beam ! Combined flux in latest and established models = 1.66057 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 68 components and 1.66057 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.834 mas, bmaj=13.63 mas, bpa=10.5 degrees ! Estimated noise=2190.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234245 Jy ! Component: 100 - total flux cleaned = 0.0399567 Jy ! Component: 150 - total flux cleaned = 0.0521046 Jy ! Component: 200 - total flux cleaned = 0.0611879 Jy ! Total flux subtracted in 200 components = 0.0611879 Jy ! Clean residual min=-0.008817 max=0.008209 Jy/beam ! Clean residual mean=0.000014 rms=0.002604 Jy/beam ! Combined flux in latest and established models = 1.72176 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062771 Jy ! Component: 100 - total flux cleaned = 0.0118113 Jy ! Component: 150 - total flux cleaned = 0.0168091 Jy ! Component: 200 - total flux cleaned = 0.0213615 Jy ! Total flux subtracted in 200 components = 0.0213615 Jy ! Clean residual min=-0.006526 max=0.005460 Jy/beam ! Clean residual mean=0.000004 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 1.74312 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 161 components and 1.74312 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.733 mas, bmaj=11.88 mas, bpa=21.41 degrees ! Estimated noise=2023.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00085664 Jy ! Component: 100 - total flux cleaned = 0.00106175 Jy ! Component: 150 - total flux cleaned = 0.00252086 Jy ! Component: 200 - total flux cleaned = 0.00401469 Jy ! Total flux subtracted in 200 components = 0.00401469 Jy ! Clean residual min=-0.006035 max=0.005218 Jy/beam ! Clean residual mean=0.000002 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 1.74713 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 188 components and 1.74713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087767Jy sigma=0.000632 ! Fit after self-cal, rms=0.087616Jy sigma=0.000631 wmodel J2134-0153_S_2017_04_28_pus_map.mod ! Writing 188 model components to file: J2134-0153_S_2017_04_28_pus_map.mod wobs J2134-0153_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_04_28_pus_uvs.fits wwins J2134-0153_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J2134-0153_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000592772 Jy ! Component: 100 - total flux cleaned = -0.00157469 Jy ! Component: 150 - total flux cleaned = -0.00199172 Jy ! Component: 200 - total flux cleaned = -0.00230191 Jy ! Component: 250 - total flux cleaned = -0.0026666 Jy ! Component: 300 - total flux cleaned = -0.00280452 Jy ! Component: 350 - total flux cleaned = -0.00299901 Jy ! Component: 400 - total flux cleaned = -0.00293611 Jy ! Component: 450 - total flux cleaned = -0.00299607 Jy ! Component: 500 - total flux cleaned = -0.00294055 Jy ! Component: 550 - total flux cleaned = -0.00277738 Jy ! Component: 600 - total flux cleaned = -0.00251544 Jy ! Component: 650 - total flux cleaned = -0.00231407 Jy ! Component: 700 - total flux cleaned = -0.00212067 Jy ! Component: 750 - total flux cleaned = -0.00197985 Jy ! Component: 800 - total flux cleaned = -0.00175333 Jy ! Component: 850 - total flux cleaned = -0.00153229 Jy ! Component: 900 - total flux cleaned = -0.00127415 Jy ! Component: 950 - total flux cleaned = -0.00102416 Jy ! Component: 1000 - total flux cleaned = -0.000902559 Jy ! Component: 1050 - total flux cleaned = -0.000784826 Jy ! Component: 1100 - total flux cleaned = -0.000593427 Jy ! Component: 1150 - total flux cleaned = -0.000406304 Jy ! Component: 1200 - total flux cleaned = -0.000260143 Jy ! Component: 1250 - total flux cleaned = -0.000224074 Jy ! Component: 1300 - total flux cleaned = 2.178e-05 Jy ! Component: 1350 - total flux cleaned = 0.000124606 Jy ! Component: 1400 - total flux cleaned = 0.000326635 Jy ! Component: 1450 - total flux cleaned = 0.000524246 Jy ! Component: 1500 - total flux cleaned = 0.000589251 Jy ! Component: 1550 - total flux cleaned = 0.000716947 Jy ! Component: 1600 - total flux cleaned = 0.000873173 Jy ! Component: 1650 - total flux cleaned = 0.0010267 Jy ! Component: 1700 - total flux cleaned = 0.00114777 Jy ! Component: 1750 - total flux cleaned = 0.00123725 Jy ! Component: 1800 - total flux cleaned = 0.0012962 Jy ! Component: 1850 - total flux cleaned = 0.00144173 Jy ! Component: 1900 - total flux cleaned = 0.00149904 Jy ! Component: 1950 - total flux cleaned = 0.00161225 Jy ! Component: 2000 - total flux cleaned = 0.00175214 Jy ! Component: 2050 - total flux cleaned = 0.00188979 Jy ! Component: 2100 - total flux cleaned = 0.00199837 Jy ! Component: 2150 - total flux cleaned = 0.00202511 Jy ! Component: 2200 - total flux cleaned = 0.0021049 Jy ! Component: 2250 - total flux cleaned = 0.002105 Jy ! Component: 2300 - total flux cleaned = 0.00218324 Jy ! Component: 2350 - total flux cleaned = 0.00226085 Jy ! Component: 2400 - total flux cleaned = 0.00238829 Jy ! Component: 2450 - total flux cleaned = 0.00241367 Jy ! Component: 2500 - total flux cleaned = 0.00248873 Jy ! Component: 2550 - total flux cleaned = 0.00251342 Jy ! Component: 2600 - total flux cleaned = 0.00253809 Jy ! Component: 2650 - total flux cleaned = 0.00256251 Jy ! Component: 2700 - total flux cleaned = 0.00258641 Jy ! Component: 2750 - total flux cleaned = 0.00258614 Jy ! Component: 2800 - total flux cleaned = 0.00256252 Jy ! Component: 2850 - total flux cleaned = 0.0026096 Jy ! Component: 2900 - total flux cleaned = 0.00263283 Jy ! Component: 2950 - total flux cleaned = 0.00272542 Jy ! Component: 3000 - total flux cleaned = 0.00274819 Jy ! Component: 3050 - total flux cleaned = 0.00274837 Jy ! Component: 3100 - total flux cleaned = 0.00286182 Jy ! Component: 3150 - total flux cleaned = 0.00290679 Jy ! Component: 3200 - total flux cleaned = 0.00299658 Jy ! Component: 3250 - total flux cleaned = 0.00304098 Jy ! Component: 3300 - total flux cleaned = 0.00310743 Jy ! Component: 3350 - total flux cleaned = 0.00317349 Jy ! Component: 3400 - total flux cleaned = 0.00319553 Jy ! Component: 3450 - total flux cleaned = 0.00326092 Jy ! Component: 3500 - total flux cleaned = 0.00332566 Jy ! Component: 3550 - total flux cleaned = 0.0034332 Jy ! Component: 3600 - total flux cleaned = 0.0034332 Jy ! Component: 3650 - total flux cleaned = 0.00347591 Jy ! Component: 3700 - total flux cleaned = 0.00358215 Jy ! Component: 3750 - total flux cleaned = 0.0036668 Jy ! Component: 3800 - total flux cleaned = 0.003709 Jy ! Component: 3850 - total flux cleaned = 0.00373009 Jy ! Component: 3900 - total flux cleaned = 0.00375111 Jy ! Component: 3950 - total flux cleaned = 0.00375098 Jy ! Component: 4000 - total flux cleaned = 0.00377188 Jy ! Component: 4050 - total flux cleaned = 0.00375091 Jy ! Total flux subtracted in 4096 components = 0.00383453 Jy ! Clean residual min=-0.001369 max=0.001238 Jy/beam ! Clean residual mean=-0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 1.75097 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 443 components and 1.75097 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.733 x 11.88 at 21.41 degrees (North through East) ! Clean map min=-0.0029772 max=1.3505 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.35051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361427 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0802869 0.0802869 0.160574 0.321148 0.642295 1.28459 2.56918 5.13836 10.2767 20.5534 41.1069 82.2138 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.35 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.733 x 11.88 at 21.41 degrees (North through East) ! Clean map min=-0.0029772 max=1.3505 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:34:08 2019