! Started logfile: J2134-0153_S_2017_03_23_pus_uvs.log on Mon May 13 10:09:10 2019 obs J2134-0153_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_03_23_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.891667 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 1284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.540627Jy sigma=0.003963 ! Fit after self-cal, rms=0.532959Jy sigma=0.003896 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=7.082 mas, bpa=-5.886 degrees ! Estimated noise=3185.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.888256 Jy ! Component: 100 - total flux cleaned = 1.21606 Jy ! Total flux subtracted in 100 components = 1.21606 Jy ! Clean residual min=-0.068683 max=0.152228 Jy/beam ! Clean residual mean=0.001389 rms=0.025784 Jy/beam ! Combined flux in latest and established models = 1.21606 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.21606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385814Jy sigma=0.002730 ! Fit after self-cal, rms=0.385650Jy sigma=0.002728 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=7.806 mas, bpa=-3.597 degrees ! Estimated noise=2758.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213538 Jy ! Component: 100 - total flux cleaned = 0.322035 Jy ! Component: 150 - total flux cleaned = 0.3845 Jy ! Component: 200 - total flux cleaned = 0.422349 Jy ! Total flux subtracted in 200 components = 0.422349 Jy ! Clean residual min=-0.048899 max=0.054896 Jy/beam ! Clean residual mean=0.000766 rms=0.013525 Jy/beam ! Combined flux in latest and established models = 1.63841 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 1.63841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232146Jy sigma=0.001596 ! Fit after self-cal, rms=0.232119Jy sigma=0.001595 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.95 KP 1.06 ! LA 0.98 MK 1.00 NL 0.88 OV 1.09 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.99 HN 1.01 KP 1.00 ! LA 0.96 MK 1.02 NL 1.03 OV 1.11 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.04 HN 0.98 KP 0.89 ! LA 0.75 MK 1.03 NL 1.16 OV 1.02 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 0.98 KP 1.00* ! LA 0.77 MK 1.66 NL 1.00* OV 0.92 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.232119Jy sigma=0.001595 ! Fit after self-cal, rms=0.122532Jy sigma=0.000899 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=7.932 mas, bpa=-2.775 degrees ! Estimated noise=2754.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441198 Jy ! Component: 100 - total flux cleaned = 0.0662392 Jy ! Component: 150 - total flux cleaned = 0.0766428 Jy ! Component: 200 - total flux cleaned = 0.0793824 Jy ! Total flux subtracted in 200 components = 0.0793824 Jy ! Clean residual min=-0.015620 max=0.016862 Jy/beam ! Clean residual mean=0.000053 rms=0.004441 Jy/beam ! Combined flux in latest and established models = 1.71779 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 66 components and 1.71779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106493Jy sigma=0.000753 ! Fit after self-cal, rms=0.105729Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105729Jy sigma=0.000748 ! Fit after self-cal, rms=0.103443Jy sigma=0.000737 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=7.935 mas, bpa=-2.724 degrees ! Estimated noise=2745.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131864 Jy ! Component: 100 - total flux cleaned = 0.0158278 Jy ! Component: 150 - total flux cleaned = 0.0179081 Jy ! Component: 200 - total flux cleaned = 0.0189437 Jy ! Total flux subtracted in 200 components = 0.0189437 Jy ! Clean residual min=-0.013959 max=0.013898 Jy/beam ! Clean residual mean=0.000070 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 1.73673 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 1.73673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100633Jy sigma=0.000715 ! Fit after self-cal, rms=0.100487Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343049 Jy ! Component: 100 - total flux cleaned = 0.00432278 Jy ! Component: 150 - total flux cleaned = 0.00473199 Jy ! Component: 200 - total flux cleaned = 0.00511349 Jy ! Total flux subtracted in 200 components = 0.00511349 Jy ! Clean residual min=-0.013106 max=0.014132 Jy/beam ! Clean residual mean=0.000057 rms=0.003344 Jy/beam ! Combined flux in latest and established models = 1.74185 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 1.74185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099538Jy sigma=0.000708 ! Fit after self-cal, rms=0.099506Jy sigma=0.000708 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099506Jy sigma=0.000708 ! Fit after self-cal, rms=0.099489Jy sigma=0.000705 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.654 mas, bmaj=7.949 mas, bpa=-2.613 degrees ! Estimated noise=2746.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192098 Jy ! Component: 100 - total flux cleaned = -0.00107813 Jy ! Component: 150 - total flux cleaned = -0.000503611 Jy ! Component: 200 - total flux cleaned = -0.000334026 Jy ! Total flux subtracted in 200 components = -0.000334026 Jy ! Clean residual min=-0.012276 max=0.012490 Jy/beam ! Clean residual mean=0.000073 rms=0.003105 Jy/beam ! Combined flux in latest and established models = 1.74151 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 1.74151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098535Jy sigma=0.000699 ! Fit after self-cal, rms=0.098511Jy sigma=0.000699 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000672707 Jy ! Component: 100 - total flux cleaned = 0.000672908 Jy ! Component: 150 - total flux cleaned = 0.000526744 Jy ! Component: 200 - total flux cleaned = 0.000527475 Jy ! Total flux subtracted in 200 components = 0.000527475 Jy ! Clean residual min=-0.011746 max=0.012290 Jy/beam ! Clean residual mean=0.000068 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 1.74204 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 1.74204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098078Jy sigma=0.000696 ! Fit after self-cal, rms=0.098057Jy sigma=0.000696 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098057Jy sigma=0.000696 ! Fit after self-cal, rms=0.098331Jy sigma=0.000695 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.558 mas, bmaj=12.47 mas, bpa=-12.76 degrees ! Estimated noise=3369.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104685 Jy ! Component: 100 - total flux cleaned = -0.00143883 Jy ! Component: 150 - total flux cleaned = -0.00192336 Jy ! Component: 200 - total flux cleaned = -0.00235095 Jy ! Total flux subtracted in 200 components = -0.00235095 Jy ! Clean residual min=-0.013311 max=0.013698 Jy/beam ! Clean residual mean=0.000133 rms=0.003738 Jy/beam ! Combined flux in latest and established models = 1.73969 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 1.73969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098146Jy sigma=0.000694 ! Fit after self-cal, rms=0.098093Jy sigma=0.000694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160537 Jy ! Component: 100 - total flux cleaned = -0.000562313 Jy ! Component: 150 - total flux cleaned = -0.000919857 Jy ! Component: 200 - total flux cleaned = -0.00124541 Jy ! Total flux subtracted in 200 components = -0.00124541 Jy ! Clean residual min=-0.012825 max=0.013381 Jy/beam ! Clean residual mean=0.000132 rms=0.003644 Jy/beam ! Combined flux in latest and established models = 1.73844 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 1.73844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098097Jy sigma=0.000694 ! Fit after self-cal, rms=0.098031Jy sigma=0.000693 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=7.959 mas, bpa=-2.513 degrees ! Estimated noise=2748.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 7.959 at -2.513 degrees (North through East) ! Clean map min=-0.011595 max=1.1964 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098031Jy sigma=0.000693 ! Fit after self-cal, rms=0.092206Jy sigma=0.000644 ! Inverting map and beam ! Estimated beam: bmin=3.662 mas, bmaj=7.956 mas, bpa=-2.364 degrees ! Estimated noise=2749.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203219 Jy ! Component: 100 - total flux cleaned = -0.00218832 Jy ! Component: 150 - total flux cleaned = -0.00304728 Jy ! Component: 200 - total flux cleaned = -0.00357384 Jy ! Total flux subtracted in 200 components = -0.00357384 Jy ! Clean residual min=-0.010935 max=0.011719 Jy/beam ! Clean residual mean=0.000071 rms=0.002795 Jy/beam ! Combined flux in latest and established models = 1.73487 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 151 components and 1.73487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091615Jy sigma=0.000641 ! Fit after self-cal, rms=0.091604Jy sigma=0.000641 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000114622 Jy ! Component: 100 - total flux cleaned = -0.000353565 Jy ! Component: 150 - total flux cleaned = -0.000469114 Jy ! Component: 200 - total flux cleaned = -0.000581724 Jy ! Total flux subtracted in 200 components = -0.000581724 Jy ! Clean residual min=-0.010674 max=0.011374 Jy/beam ! Clean residual mean=0.000070 rms=0.002752 Jy/beam ! Combined flux in latest and established models = 1.73429 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 156 components and 1.73429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091284Jy sigma=0.000639 ! Fit after self-cal, rms=0.091272Jy sigma=0.000639 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091272Jy sigma=0.000639 ! Fit after self-cal, rms=0.091470Jy sigma=0.000638 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.211 mas, bpa=-4.529 degrees ! Estimated noise=3215.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.893034 Jy ! Component: 100 - total flux cleaned = 1.2123 Jy ! Component: 150 - total flux cleaned = 1.37313 Jy ! Component: 200 - total flux cleaned = 1.45729 Jy ! Total flux subtracted in 200 components = 1.45729 Jy ! Clean residual min=-0.029652 max=0.053006 Jy/beam ! Clean residual mean=0.000580 rms=0.009569 Jy/beam ! Combined flux in latest and established models = 1.45729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.45729 Jy ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=7.964 mas, bpa=-2.295 degrees ! Estimated noise=2750.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702594 Jy ! Component: 100 - total flux cleaned = 0.115634 Jy ! Component: 150 - total flux cleaned = 0.14933 Jy ! Component: 200 - total flux cleaned = 0.175153 Jy ! Total flux subtracted in 200 components = 0.175153 Jy ! Clean residual min=-0.017346 max=0.018767 Jy/beam ! Clean residual mean=0.000276 rms=0.005002 Jy/beam ! Combined flux in latest and established models = 1.63244 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 73 components and 1.63244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.573 mas, bmaj=12.48 mas, bpa=-12.61 degrees ! Estimated noise=3365.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312291 Jy ! Component: 100 - total flux cleaned = 0.0515678 Jy ! Component: 150 - total flux cleaned = 0.0661127 Jy ! Component: 200 - total flux cleaned = 0.0767735 Jy ! Total flux subtracted in 200 components = 0.0767735 Jy ! Clean residual min=-0.013264 max=0.012840 Jy/beam ! Clean residual mean=0.000222 rms=0.003827 Jy/beam ! Combined flux in latest and established models = 1.70922 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00788778 Jy ! Component: 100 - total flux cleaned = 0.0137671 Jy ! Component: 150 - total flux cleaned = 0.0163765 Jy ! Component: 200 - total flux cleaned = 0.0181261 Jy ! Total flux subtracted in 200 components = 0.0181261 Jy ! Clean residual min=-0.011709 max=0.010739 Jy/beam ! Clean residual mean=0.000158 rms=0.003317 Jy/beam ! Combined flux in latest and established models = 1.72734 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 169 components and 1.72734 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.666 mas, bmaj=7.964 mas, bpa=-2.295 degrees ! Estimated noise=2750.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.63218e-05 Jy ! Component: 100 - total flux cleaned = 0.00225645 Jy ! Component: 150 - total flux cleaned = 0.00442224 Jy ! Component: 200 - total flux cleaned = 0.00615674 Jy ! Total flux subtracted in 200 components = 0.00615674 Jy ! Clean residual min=-0.010383 max=0.009442 Jy/beam ! Clean residual mean=0.000072 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 1.7335 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 193 components and 1.7335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090303Jy sigma=0.000632 ! Fit after self-cal, rms=0.089716Jy sigma=0.000627 wmodel J2134-0153_S_2017_03_23_pus_map.mod ! Writing 193 model components to file: J2134-0153_S_2017_03_23_pus_map.mod wobs J2134-0153_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_03_23_pus_uvs.fits wwins J2134-0153_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J2134-0153_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.82393e-05 Jy ! Component: 100 - total flux cleaned = -0.000551989 Jy ! Component: 150 - total flux cleaned = -0.00152616 Jy ! Component: 200 - total flux cleaned = -0.00255969 Jy ! Component: 250 - total flux cleaned = -0.00340126 Jy ! Component: 300 - total flux cleaned = -0.00454371 Jy ! Component: 350 - total flux cleaned = -0.00498236 Jy ! Component: 400 - total flux cleaned = -0.00540138 Jy ! Component: 450 - total flux cleaned = -0.00590503 Jy ! Component: 500 - total flux cleaned = -0.00619588 Jy ! Component: 550 - total flux cleaned = -0.00675539 Jy ! Component: 600 - total flux cleaned = -0.00702613 Jy ! Component: 650 - total flux cleaned = -0.00720192 Jy ! Component: 700 - total flux cleaned = -0.00737422 Jy ! Component: 750 - total flux cleaned = -0.00753942 Jy ! Component: 800 - total flux cleaned = -0.00738206 Jy ! Component: 850 - total flux cleaned = -0.00753934 Jy ! Component: 900 - total flux cleaned = -0.00731087 Jy ! Component: 950 - total flux cleaned = -0.00745859 Jy ! Component: 1000 - total flux cleaned = -0.00738553 Jy ! Component: 1050 - total flux cleaned = -0.00731644 Jy ! Component: 1100 - total flux cleaned = -0.00724765 Jy ! Component: 1150 - total flux cleaned = -0.00717966 Jy ! Component: 1200 - total flux cleaned = -0.00684863 Jy ! Component: 1250 - total flux cleaned = -0.00671996 Jy ! Component: 1300 - total flux cleaned = -0.00665427 Jy ! Component: 1350 - total flux cleaned = -0.00627775 Jy ! Component: 1400 - total flux cleaned = -0.00633885 Jy ! Component: 1450 - total flux cleaned = -0.00603438 Jy ! Component: 1500 - total flux cleaned = -0.00585504 Jy ! Component: 1550 - total flux cleaned = -0.00568054 Jy ! Component: 1600 - total flux cleaned = -0.00556525 Jy ! Component: 1650 - total flux cleaned = -0.00533871 Jy ! Component: 1700 - total flux cleaned = -0.00517166 Jy ! Component: 1750 - total flux cleaned = -0.004843 Jy ! Component: 1800 - total flux cleaned = -0.0047349 Jy ! Component: 1850 - total flux cleaned = -0.00436101 Jy ! Component: 1900 - total flux cleaned = -0.00404527 Jy ! Component: 1950 - total flux cleaned = -0.00368111 Jy ! Component: 2000 - total flux cleaned = -0.00332301 Jy ! Component: 2050 - total flux cleaned = -0.00317171 Jy ! Component: 2100 - total flux cleaned = -0.00292162 Jy ! Component: 2150 - total flux cleaned = -0.00252776 Jy ! Component: 2200 - total flux cleaned = -0.0022353 Jy ! Component: 2250 - total flux cleaned = -0.00189936 Jy ! Component: 2300 - total flux cleaned = -0.00170993 Jy ! Component: 2350 - total flux cleaned = -0.00119347 Jy ! Component: 2400 - total flux cleaned = -0.000915735 Jy ! Component: 2450 - total flux cleaned = -0.000594353 Jy ! Component: 2500 - total flux cleaned = -0.00050382 Jy ! Component: 2550 - total flux cleaned = -0.000143589 Jy ! Component: 2600 - total flux cleaned = 3.46964e-05 Jy ! Component: 2650 - total flux cleaned = 0.000387208 Jy ! Component: 2700 - total flux cleaned = 0.000604768 Jy ! Component: 2750 - total flux cleaned = 0.000777449 Jy ! Component: 2800 - total flux cleaned = 0.00111894 Jy ! Component: 2850 - total flux cleaned = 0.00124534 Jy ! Component: 2900 - total flux cleaned = 0.00153806 Jy ! Component: 2950 - total flux cleaned = 0.00170372 Jy ! Component: 3000 - total flux cleaned = 0.00182636 Jy ! Component: 3050 - total flux cleaned = 0.00203009 Jy ! Component: 3100 - total flux cleaned = 0.00227141 Jy ! Component: 3150 - total flux cleaned = 0.00219051 Jy ! Component: 3200 - total flux cleaned = 0.00238893 Jy ! Component: 3250 - total flux cleaned = 0.00242794 Jy ! Component: 3300 - total flux cleaned = 0.00250626 Jy ! Component: 3350 - total flux cleaned = 0.0027771 Jy ! Component: 3400 - total flux cleaned = 0.00281568 Jy ! Component: 3450 - total flux cleaned = 0.00296792 Jy ! Component: 3500 - total flux cleaned = 0.00319501 Jy ! Component: 3550 - total flux cleaned = 0.00323251 Jy ! Component: 3600 - total flux cleaned = 0.0034934 Jy ! Component: 3650 - total flux cleaned = 0.00367858 Jy ! Component: 3700 - total flux cleaned = 0.00386231 Jy ! Component: 3750 - total flux cleaned = 0.00400874 Jy ! Component: 3800 - total flux cleaned = 0.00426248 Jy ! Component: 3850 - total flux cleaned = 0.00458666 Jy ! Component: 3900 - total flux cleaned = 0.00480108 Jy ! Component: 3950 - total flux cleaned = 0.00505033 Jy ! Component: 4000 - total flux cleaned = 0.00533277 Jy ! Component: 4050 - total flux cleaned = 0.0055438 Jy ! Total flux subtracted in 4096 components = 0.0056489 Jy ! Clean residual min=-0.002274 max=0.002105 Jy/beam ! Clean residual mean=0.000012 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 1.73915 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 478 components and 1.73915 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.666 x 7.964 at -2.295 degrees (North through East) ! Clean map min=-0.0074647 max=1.2065 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.20645 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000586796 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.145914 0.145914 0.291828 0.583657 1.16731 2.33463 4.66925 9.33851 18.677 37.354 74.708 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.206 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.666 x 7.964 at -2.295 degrees (North through East) ! Clean map min=-0.0074647 max=1.2065 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:09:14 2019