! Started logfile: J2134-0153_S_2017_02_19_pus_uvs.log on Sat May 4 18:58:59 2019 obs J2134-0153_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683333 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.427830Jy sigma=0.003162 ! Fit after self-cal, rms=0.419272Jy sigma=0.003099 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=6.549 mas, bpa=-5.309 degrees ! Estimated noise=3827.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.652923 Jy ! Component: 100 - total flux cleaned = 0.932131 Jy ! Total flux subtracted in 100 components = 0.932131 Jy ! Clean residual min=-0.073900 max=0.131315 Jy/beam ! Clean residual mean=0.000091 rms=0.022710 Jy/beam ! Combined flux in latest and established models = 0.932131 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.932131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321987Jy sigma=0.002118 ! Fit after self-cal, rms=0.321490Jy sigma=0.002115 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.12 mas, bpa=-3.24 degrees ! Estimated noise=3402.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183377 Jy ! Component: 100 - total flux cleaned = 0.271616 Jy ! Component: 150 - total flux cleaned = 0.319076 Jy ! Component: 200 - total flux cleaned = 0.348361 Jy ! Total flux subtracted in 200 components = 0.348361 Jy ! Clean residual min=-0.052586 max=0.044260 Jy/beam ! Clean residual mean=-0.000023 rms=0.012041 Jy/beam ! Combined flux in latest and established models = 1.28049 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 1.28049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189486Jy sigma=0.001223 ! Fit after self-cal, rms=0.189346Jy sigma=0.001221 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.01 KP 1.05 ! LA 0.98 MK 0.99 NL 0.92 OV 1.07 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 HN 1.03 KP 1.00 ! LA 0.95 MK 0.96 NL 1.09 OV 1.11 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.99 KP 0.90 ! LA 0.74 MK 1.00 NL 1.22 OV 1.01 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.01 HN 0.99 KP 1.00* ! LA 0.78 MK 1.21 NL 1.00* OV 1.05 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.189346Jy sigma=0.001221 ! Fit after self-cal, rms=0.110815Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.834 mas, bmaj=7.193 mas, bpa=-3.074 degrees ! Estimated noise=3378.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223761 Jy ! Component: 100 - total flux cleaned = -0.00201392 Jy ! Component: 150 - total flux cleaned = -0.00159778 Jy ! Component: 200 - total flux cleaned = -0.0014036 Jy ! Total flux subtracted in 200 components = -0.0014036 Jy ! Clean residual min=-0.021325 max=0.030147 Jy/beam ! Clean residual mean=0.000019 rms=0.006536 Jy/beam ! Combined flux in latest and established models = 1.27909 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 1.27909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109972Jy sigma=0.000776 ! Fit after self-cal, rms=0.110032Jy sigma=0.000775 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110032Jy sigma=0.000775 ! Fit after self-cal, rms=0.110079Jy sigma=0.000775 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.839 mas, bmaj=7.195 mas, bpa=-3.006 degrees ! Estimated noise=3383.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000900574 Jy ! Component: 100 - total flux cleaned = -0.000730682 Jy ! Component: 150 - total flux cleaned = -0.000570633 Jy ! Component: 200 - total flux cleaned = -0.000260121 Jy ! Total flux subtracted in 200 components = -0.000260121 Jy ! Clean residual min=-0.021424 max=0.029535 Jy/beam ! Clean residual mean=0.000019 rms=0.006460 Jy/beam ! Combined flux in latest and established models = 1.27883 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 1.27883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109615Jy sigma=0.000772 ! Fit after self-cal, rms=0.109607Jy sigma=0.000772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027765 Jy ! Component: 100 - total flux cleaned = 0.0426864 Jy ! Component: 150 - total flux cleaned = 0.0511389 Jy ! Component: 200 - total flux cleaned = 0.0551464 Jy ! Total flux subtracted in 200 components = 0.0551464 Jy ! Clean residual min=-0.016791 max=0.026698 Jy/beam ! Clean residual mean=0.000011 rms=0.004680 Jy/beam ! Combined flux in latest and established models = 1.33397 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 85 components and 1.33397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102343Jy sigma=0.000713 ! Fit after self-cal, rms=0.101756Jy sigma=0.000709 ! Inverting map ! Added new window around map position (4.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224854 Jy ! Component: 100 - total flux cleaned = 0.034171 Jy ! Component: 150 - total flux cleaned = 0.0410772 Jy ! Component: 200 - total flux cleaned = 0.0469328 Jy ! Total flux subtracted in 200 components = 0.0469328 Jy ! Clean residual min=-0.012674 max=0.014616 Jy/beam ! Clean residual mean=0.000008 rms=0.003361 Jy/beam ! Combined flux in latest and established models = 1.38091 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 110 components and 1.38091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096024Jy sigma=0.000668 ! Fit after self-cal, rms=0.095397Jy sigma=0.000665 ! Inverting map ! Added new window around map position (-71.5, 113). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141464 Jy ! Component: 100 - total flux cleaned = 0.0230723 Jy ! Component: 150 - total flux cleaned = 0.0281888 Jy ! Component: 200 - total flux cleaned = 0.0323244 Jy ! Total flux subtracted in 200 components = 0.0323244 Jy ! Clean residual min=-0.010295 max=0.009441 Jy/beam ! Clean residual mean=0.000007 rms=0.002489 Jy/beam ! Combined flux in latest and established models = 1.41323 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 1.41323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092652Jy sigma=0.000645 ! Fit after self-cal, rms=0.092570Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092570Jy sigma=0.000645 ! Fit after self-cal, rms=0.091385Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.185 mas, bpa=-3.01 degrees ! Estimated noise=3360.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741529 Jy ! Component: 100 - total flux cleaned = 0.0121539 Jy ! Component: 150 - total flux cleaned = 0.0153932 Jy ! Component: 200 - total flux cleaned = 0.0173926 Jy ! Total flux subtracted in 200 components = 0.0173926 Jy ! Clean residual min=-0.007452 max=0.008506 Jy/beam ! Clean residual mean=0.000002 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 1.43062 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 159 components and 1.43062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090395Jy sigma=0.000633 ! Fit after self-cal, rms=0.090349Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26, 96). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721242 Jy ! Component: 100 - total flux cleaned = 0.0109241 Jy ! Component: 150 - total flux cleaned = 0.0140044 Jy ! Component: 200 - total flux cleaned = 0.0151225 Jy ! Total flux subtracted in 200 components = 0.0151225 Jy ! Clean residual min=-0.006238 max=0.006334 Jy/beam ! Clean residual mean=0.000001 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 1.44575 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 180 components and 1.44575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089543Jy sigma=0.000627 ! Fit after self-cal, rms=0.089519Jy sigma=0.000627 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089519Jy sigma=0.000627 ! Fit after self-cal, rms=0.089383Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.794 mas, bmaj=11.72 mas, bpa=7.516 degrees ! Estimated noise=4577.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632204 Jy ! Component: 100 - total flux cleaned = 0.010565 Jy ! Component: 150 - total flux cleaned = 0.0119435 Jy ! Component: 200 - total flux cleaned = 0.0127854 Jy ! Total flux subtracted in 200 components = 0.0127854 Jy ! Clean residual min=-0.007250 max=0.006690 Jy/beam ! Clean residual mean=0.000000 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 1.45853 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 199 components and 1.45853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089108Jy sigma=0.000625 ! Fit after self-cal, rms=0.089067Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031145 Jy ! Component: 100 - total flux cleaned = 0.00479543 Jy ! Component: 150 - total flux cleaned = 0.00566945 Jy ! Component: 200 - total flux cleaned = 0.00610028 Jy ! Total flux subtracted in 200 components = 0.00610028 Jy ! Clean residual min=-0.006212 max=0.005718 Jy/beam ! Clean residual mean=-0.000000 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 1.46463 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 213 components and 1.46463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088992Jy sigma=0.000624 ! Fit after self-cal, rms=0.088975Jy sigma=0.000624 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=7.18 mas, bpa=-2.983 degrees ! Estimated noise=3354.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.826 x 7.18 at -2.983 degrees (North through East) ! Clean map min=-0.0067901 max=0.88002 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088975Jy sigma=0.000624 ! Fit after self-cal, rms=0.081045Jy sigma=0.000564 ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.18 mas, bpa=-2.921 degrees ! Estimated noise=3354.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011677 Jy ! Component: 100 - total flux cleaned = 0.00245786 Jy ! Component: 150 - total flux cleaned = 0.00292021 Jy ! Component: 200 - total flux cleaned = 0.00345116 Jy ! Total flux subtracted in 200 components = 0.00345116 Jy ! Clean residual min=-0.005650 max=0.005512 Jy/beam ! Clean residual mean=-0.000002 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.46808 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 233 components and 1.46808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080696Jy sigma=0.000561 ! Fit after self-cal, rms=0.080696Jy sigma=0.000561 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612788 Jy ! Component: 100 - total flux cleaned = 0.000613738 Jy ! Component: 150 - total flux cleaned = 0.00086436 Jy ! Component: 200 - total flux cleaned = 0.000859629 Jy ! Total flux subtracted in 200 components = 0.000859629 Jy ! Clean residual min=-0.005525 max=0.005403 Jy/beam ! Clean residual mean=-0.000002 rms=0.001235 Jy/beam ! Combined flux in latest and established models = 1.46894 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 243 components and 1.46894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080524Jy sigma=0.000560 ! Fit after self-cal, rms=0.080525Jy sigma=0.000560 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080525Jy sigma=0.000560 ! Fit after self-cal, rms=0.080455Jy sigma=0.000560 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=6.59 mas, bpa=-4.976 degrees ! Estimated noise=3768.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.641738 Jy ! Component: 100 - total flux cleaned = 0.915514 Jy ! Component: 150 - total flux cleaned = 1.06192 Jy ! Component: 200 - total flux cleaned = 1.14398 Jy ! Total flux subtracted in 200 components = 1.14398 Jy ! Clean residual min=-0.031188 max=0.041982 Jy/beam ! Clean residual mean=0.000062 rms=0.009078 Jy/beam ! Combined flux in latest and established models = 1.14398 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.14398 Jy ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.176 mas, bpa=-2.899 degrees ! Estimated noise=3353.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0657642 Jy ! Component: 100 - total flux cleaned = 0.106042 Jy ! Component: 150 - total flux cleaned = 0.135816 Jy ! Component: 200 - total flux cleaned = 0.158827 Jy ! Total flux subtracted in 200 components = 0.158827 Jy ! Clean residual min=-0.015065 max=0.017521 Jy/beam ! Clean residual mean=0.000014 rms=0.004927 Jy/beam ! Combined flux in latest and established models = 1.30281 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 1.30281 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.791 mas, bmaj=11.72 mas, bpa=7.519 degrees ! Estimated noise=4579.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317736 Jy ! Component: 100 - total flux cleaned = 0.0537506 Jy ! Component: 150 - total flux cleaned = 0.0704006 Jy ! Component: 200 - total flux cleaned = 0.0833864 Jy ! Total flux subtracted in 200 components = 0.0833864 Jy ! Clean residual min=-0.013835 max=0.011750 Jy/beam ! Clean residual mean=0.000009 rms=0.004087 Jy/beam ! Combined flux in latest and established models = 1.3862 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103458 Jy ! Component: 100 - total flux cleaned = 0.0187305 Jy ! Component: 150 - total flux cleaned = 0.0256104 Jy ! Component: 200 - total flux cleaned = 0.0314756 Jy ! Total flux subtracted in 200 components = 0.0314756 Jy ! Clean residual min=-0.009682 max=0.007521 Jy/beam ! Clean residual mean=0.000005 rms=0.002556 Jy/beam ! Combined flux in latest and established models = 1.41767 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 119 components and 1.41767 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=7.176 mas, bpa=-2.899 degrees ! Estimated noise=3353.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375472 Jy ! Component: 100 - total flux cleaned = 0.00597599 Jy ! Component: 150 - total flux cleaned = 0.00786992 Jy ! Component: 200 - total flux cleaned = 0.00955921 Jy ! Total flux subtracted in 200 components = 0.00955921 Jy ! Clean residual min=-0.007676 max=0.006417 Jy/beam ! Clean residual mean=0.000001 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 1.42723 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 146 components and 1.42723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082074Jy sigma=0.000573 ! Fit after self-cal, rms=0.081777Jy sigma=0.000570 wmodel J2134-0153_S_2017_02_19_pus_map.mod ! Writing 146 model components to file: J2134-0153_S_2017_02_19_pus_map.mod wobs J2134-0153_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_02_19_pus_uvs.fits wwins J2134-0153_S_2017_02_19_pus_map.win ! wwins: Wrote 5 windows to J2134-0153_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307237 Jy ! Component: 100 - total flux cleaned = -0.00502043 Jy ! Component: 150 - total flux cleaned = -0.00660913 Jy ! Component: 200 - total flux cleaned = -0.00730575 Jy ! Component: 250 - total flux cleaned = -0.00778228 Jy ! Component: 300 - total flux cleaned = -0.00787472 Jy ! Component: 350 - total flux cleaned = -0.00770001 Jy ! Component: 400 - total flux cleaned = -0.00786879 Jy ! Component: 450 - total flux cleaned = -0.00778531 Jy ! Component: 500 - total flux cleaned = -0.00778571 Jy ! Component: 550 - total flux cleaned = -0.00771167 Jy ! Component: 600 - total flux cleaned = -0.00793577 Jy ! Component: 650 - total flux cleaned = -0.0080803 Jy ! Component: 700 - total flux cleaned = -0.00815037 Jy ! Component: 750 - total flux cleaned = -0.00849416 Jy ! Component: 800 - total flux cleaned = -0.00882923 Jy ! Component: 850 - total flux cleaned = -0.00902561 Jy ! Component: 900 - total flux cleaned = -0.00934598 Jy ! Component: 950 - total flux cleaned = -0.00947292 Jy ! Component: 1000 - total flux cleaned = -0.00996411 Jy ! Component: 1050 - total flux cleaned = -0.0102045 Jy ! Component: 1100 - total flux cleaned = -0.0104981 Jy ! Component: 1150 - total flux cleaned = -0.0107296 Jy ! Component: 1200 - total flux cleaned = -0.0110691 Jy ! Component: 1250 - total flux cleaned = -0.0113467 Jy ! Component: 1300 - total flux cleaned = -0.011619 Jy ! Component: 1350 - total flux cleaned = -0.0117272 Jy ! Component: 1400 - total flux cleaned = -0.0118858 Jy ! Component: 1450 - total flux cleaned = -0.0120937 Jy ! Component: 1500 - total flux cleaned = -0.0122981 Jy ! Component: 1550 - total flux cleaned = -0.0123984 Jy ! Component: 1600 - total flux cleaned = -0.0123494 Jy ! Component: 1650 - total flux cleaned = -0.0124966 Jy ! Component: 1700 - total flux cleaned = -0.0125937 Jy ! Component: 1750 - total flux cleaned = -0.0126412 Jy ! Component: 1800 - total flux cleaned = -0.0126883 Jy ! Component: 1850 - total flux cleaned = -0.01278 Jy ! Component: 1900 - total flux cleaned = -0.0127803 Jy ! Component: 1950 - total flux cleaned = -0.0128258 Jy ! Component: 2000 - total flux cleaned = -0.0128706 Jy ! Component: 2050 - total flux cleaned = -0.0128704 Jy ! Component: 2100 - total flux cleaned = -0.0128273 Jy ! Component: 2150 - total flux cleaned = -0.012699 Jy ! Component: 2200 - total flux cleaned = -0.0127001 Jy ! Component: 2250 - total flux cleaned = -0.0127423 Jy ! Component: 2300 - total flux cleaned = -0.0126595 Jy ! Component: 2350 - total flux cleaned = -0.0125365 Jy ! Component: 2400 - total flux cleaned = -0.0124556 Jy ! Component: 2450 - total flux cleaned = -0.0122153 Jy ! Component: 2500 - total flux cleaned = -0.0120962 Jy ! Component: 2550 - total flux cleaned = -0.0119386 Jy ! Component: 2600 - total flux cleaned = -0.0118608 Jy ! Component: 2650 - total flux cleaned = -0.0117461 Jy ! Component: 2700 - total flux cleaned = -0.0116314 Jy ! Component: 2750 - total flux cleaned = -0.0115558 Jy ! Component: 2800 - total flux cleaned = -0.0114811 Jy ! Component: 2850 - total flux cleaned = -0.0114441 Jy ! Component: 2900 - total flux cleaned = -0.0112962 Jy ! Component: 2950 - total flux cleaned = -0.0111862 Jy ! Component: 3000 - total flux cleaned = -0.0111496 Jy ! Component: 3050 - total flux cleaned = -0.0109684 Jy ! Component: 3100 - total flux cleaned = -0.0109324 Jy ! Component: 3150 - total flux cleaned = -0.0108607 Jy ! Component: 3200 - total flux cleaned = -0.0107893 Jy ! Component: 3250 - total flux cleaned = -0.010647 Jy ! Component: 3300 - total flux cleaned = -0.0105763 Jy ! Component: 3350 - total flux cleaned = -0.0104706 Jy ! Component: 3400 - total flux cleaned = -0.0104357 Jy ! Component: 3450 - total flux cleaned = -0.0104008 Jy ! Component: 3500 - total flux cleaned = -0.0103309 Jy ! Component: 3550 - total flux cleaned = -0.0102962 Jy ! Component: 3600 - total flux cleaned = -0.0102613 Jy ! Component: 3650 - total flux cleaned = -0.0102266 Jy ! Component: 3700 - total flux cleaned = -0.0101922 Jy ! Component: 3750 - total flux cleaned = -0.0100547 Jy ! Component: 3800 - total flux cleaned = -0.00998594 Jy ! Component: 3850 - total flux cleaned = -0.00991745 Jy ! Component: 3900 - total flux cleaned = -0.00981496 Jy ! Component: 3950 - total flux cleaned = -0.00971243 Jy ! Component: 4000 - total flux cleaned = -0.00957601 Jy ! Component: 4050 - total flux cleaned = -0.00947373 Jy ! Total flux subtracted in 4096 components = -0.00937148 Jy ! Clean residual min=-0.002489 max=0.002571 Jy/beam ! Clean residual mean=-0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 1.41786 Jy keep ! Adding 279 model components to the UV plane model. ! The established model now contains 425 components and 1.41786 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.176 at -2.899 degrees (North through East) ! Clean map min=-0.0041242 max=0.89313 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.893125 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000492259 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.165349 0.165349 0.330699 0.661397 1.32279 2.64559 5.29118 10.5824 21.1647 42.3294 84.6589 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.893 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.825 x 7.176 at -2.899 degrees (North through East) ! Clean map min=-0.0041242 max=0.89313 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:59:04 2019