! Started logfile: J2134-0153_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:45 2019 obs J2134-0153_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2134-0153_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.547222 visibilities/baseline/integration-bin. ! Found source: J2134-0153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134-0153_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.462059Jy sigma=0.002336 ! Fit after self-cal, rms=0.447232Jy sigma=0.002263 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.647 mas, bmaj=14.27 mas, bpa=34.39 degrees ! Estimated noise=5337.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.773562 Jy ! Component: 100 - total flux cleaned = 0.968178 Jy ! Total flux subtracted in 100 components = 0.968178 Jy ! Clean residual min=-0.112476 max=0.164189 Jy/beam ! Clean residual mean=-0.000150 rms=0.036098 Jy/beam ! Combined flux in latest and established models = 0.968177 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.968177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419808Jy sigma=0.002235 ! Fit after self-cal, rms=0.419654Jy sigma=0.002234 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.041 mas, bmaj=14.79 mas, bpa=34.21 degrees ! Estimated noise=4486.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0559493 Jy ! Component: 100 - total flux cleaned = -0.0561835 Jy ! Component: 150 - total flux cleaned = -0.0547836 Jy ! Component: 200 - total flux cleaned = -0.0558356 Jy ! Total flux subtracted in 200 components = -0.0558356 Jy ! Clean residual min=-0.112570 max=0.169346 Jy/beam ! Clean residual mean=0.000345 rms=0.040116 Jy/beam ! Combined flux in latest and established models = 0.912342 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.912342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396620Jy sigma=0.002051 ! Fit after self-cal, rms=0.396128Jy sigma=0.002051 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.93 HN 1.02 KP 0.84 ! LA 0.80 MK 1.00* NL 0.86 OV 1.00* ! PT 2.26 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.06 KP 0.81 ! LA 0.78 MK 1.00* NL 0.98 OV 1.00* ! PT 2.24 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 1.04 KP 0.85 ! LA 0.80 MK 1.00* NL 0.97 OV 1.00* ! PT 2.36 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.10 KP 1.59 ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 2.56 SC 1.29 ! ! ! Fit before self-cal, rms=0.396128Jy sigma=0.002051 ! Fit after self-cal, rms=0.397176Jy sigma=0.000778 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.017 mas, bmaj=14.71 mas, bpa=34.27 degrees ! Estimated noise=4443.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (54.5, -33.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287592 Jy ! Component: 100 - total flux cleaned = 0.0335739 Jy ! Component: 150 - total flux cleaned = 0.0351721 Jy ! Component: 200 - total flux cleaned = 0.0356433 Jy ! Total flux subtracted in 200 components = 0.0356433 Jy ! Clean residual min=-0.015792 max=0.020705 Jy/beam ! Clean residual mean=-0.000178 rms=0.005395 Jy/beam ! Combined flux in latest and established models = 0.947985 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 59 components and 0.947985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393787Jy sigma=0.000714 ! Fit after self-cal, rms=0.396942Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396942Jy sigma=0.000711 ! Fit after self-cal, rms=0.397947Jy sigma=0.000705 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.025 mas, bmaj=14.64 mas, bpa=34.28 degrees ! Estimated noise=4439.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131643 Jy ! Component: 100 - total flux cleaned = 0.0166902 Jy ! Component: 150 - total flux cleaned = 0.0189867 Jy ! Component: 200 - total flux cleaned = 0.0213512 Jy ! Total flux subtracted in 200 components = 0.0213512 Jy ! Clean residual min=-0.013683 max=0.018795 Jy/beam ! Clean residual mean=-0.000134 rms=0.004595 Jy/beam ! Combined flux in latest and established models = 0.969336 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 85 components and 0.969336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397261Jy sigma=0.000692 ! Fit after self-cal, rms=0.397273Jy sigma=0.000691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249197 Jy ! Component: 100 - total flux cleaned = 0.00497883 Jy ! Component: 150 - total flux cleaned = 0.00702976 Jy ! Component: 200 - total flux cleaned = 0.00788661 Jy ! Total flux subtracted in 200 components = 0.00788661 Jy ! Clean residual min=-0.013684 max=0.018413 Jy/beam ! Clean residual mean=-0.000118 rms=0.004394 Jy/beam ! Combined flux in latest and established models = 0.977223 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 101 components and 0.977223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397020Jy sigma=0.000687 ! Fit after self-cal, rms=0.396950Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396950Jy sigma=0.000687 ! Fit after self-cal, rms=0.399020Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.033 mas, bmaj=14.57 mas, bpa=34.27 degrees ! Estimated noise=4449.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987878 Jy ! Component: 100 - total flux cleaned = 0.0146684 Jy ! Component: 150 - total flux cleaned = 0.0166946 Jy ! Component: 200 - total flux cleaned = 0.0174297 Jy ! Total flux subtracted in 200 components = 0.0174297 Jy ! Clean residual min=-0.012046 max=0.016105 Jy/beam ! Clean residual mean=-0.000095 rms=0.003838 Jy/beam ! Combined flux in latest and established models = 0.994653 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 116 components and 0.994653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398824Jy sigma=0.000676 ! Fit after self-cal, rms=0.398786Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702456 Jy ! Component: 100 - total flux cleaned = 0.00137216 Jy ! Component: 150 - total flux cleaned = 0.00169155 Jy ! Component: 200 - total flux cleaned = 0.00169065 Jy ! Total flux subtracted in 200 components = 0.00169065 Jy ! Clean residual min=-0.011926 max=0.015887 Jy/beam ! Clean residual mean=-0.000091 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 0.996343 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 125 components and 0.996343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398603Jy sigma=0.000674 ! Fit after self-cal, rms=0.398570Jy sigma=0.000674 ! Inverting map ! Added new window around map position (-94.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146641 Jy ! Component: 100 - total flux cleaned = 0.0224625 Jy ! Component: 150 - total flux cleaned = 0.0283588 Jy ! Component: 200 - total flux cleaned = 0.0317396 Jy ! Total flux subtracted in 200 components = 0.0317396 Jy ! Clean residual min=-0.009202 max=0.012365 Jy/beam ! Clean residual mean=-0.000059 rms=0.002869 Jy/beam ! Combined flux in latest and established models = 1.02808 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 156 components and 1.02808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396461Jy sigma=0.000662 ! Fit after self-cal, rms=0.396676Jy sigma=0.000661 ! Inverting map ! Added new window around map position (39, 68.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987444 Jy ! Component: 100 - total flux cleaned = 0.0135613 Jy ! Component: 150 - total flux cleaned = 0.0154783 Jy ! Component: 200 - total flux cleaned = 0.0180985 Jy ! Total flux subtracted in 200 components = 0.0180985 Jy ! Clean residual min=-0.007592 max=0.007661 Jy/beam ! Clean residual mean=-0.000058 rms=0.002169 Jy/beam ! Combined flux in latest and established models = 1.04618 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 187 components and 1.04618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395438Jy sigma=0.000655 ! Fit after self-cal, rms=0.395609Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395609Jy sigma=0.000654 ! Fit after self-cal, rms=0.396700Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.127 mas, bmaj=14.17 mas, bpa=31.31 degrees ! Estimated noise=4740.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453822 Jy ! Component: 100 - total flux cleaned = 0.00554824 Jy ! Component: 150 - total flux cleaned = 0.00682467 Jy ! Component: 200 - total flux cleaned = 0.00765803 Jy ! Total flux subtracted in 200 components = 0.00765803 Jy ! Clean residual min=-0.007559 max=0.006068 Jy/beam ! Clean residual mean=-0.000062 rms=0.002040 Jy/beam ! Combined flux in latest and established models = 1.05384 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 221 components and 1.05384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396314Jy sigma=0.000651 ! Fit after self-cal, rms=0.396437Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265679 Jy ! Component: 100 - total flux cleaned = 0.00372605 Jy ! Component: 150 - total flux cleaned = 0.00429421 Jy ! Component: 200 - total flux cleaned = 0.00416667 Jy ! Total flux subtracted in 200 components = 0.00416667 Jy ! Clean residual min=-0.006880 max=0.005290 Jy/beam ! Clean residual mean=-0.000054 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 1.05801 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 258 components and 1.05801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396113Jy sigma=0.000650 ! Fit after self-cal, rms=0.396186Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.043 mas, bmaj=14.54 mas, bpa=34.26 degrees ! Estimated noise=4447.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.043 x 14.54 at 34.26 degrees (North through East) ! Clean map min=-0.026509 max=0.95988 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396186Jy sigma=0.000650 ! Fit after self-cal, rms=0.453990Jy sigma=0.000587 ! Inverting map and beam ! Estimated beam: bmin=5.044 mas, bmaj=14.54 mas, bpa=34.24 degrees ! Estimated noise=4448.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024355 Jy ! Component: 100 - total flux cleaned = 0.00397456 Jy ! Component: 150 - total flux cleaned = 0.00535912 Jy ! Component: 200 - total flux cleaned = 0.00613575 Jy ! Total flux subtracted in 200 components = 0.00613575 Jy ! Clean residual min=-0.005770 max=0.006345 Jy/beam ! Clean residual mean=-0.000029 rms=0.001547 Jy/beam ! Combined flux in latest and established models = 1.06414 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 289 components and 1.06414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.453662Jy sigma=0.000585 ! Fit after self-cal, rms=0.453674Jy sigma=0.000585 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798432 Jy ! Component: 100 - total flux cleaned = 0.00104043 Jy ! Component: 150 - total flux cleaned = 0.00162048 Jy ! Component: 200 - total flux cleaned = 0.00184138 Jy ! Total flux subtracted in 200 components = 0.00184138 Jy ! Clean residual min=-0.005380 max=0.005942 Jy/beam ! Clean residual mean=-0.000024 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 1.06598 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 306 components and 1.06598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.453433Jy sigma=0.000584 ! Fit after self-cal, rms=0.453464Jy sigma=0.000584 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.453464Jy sigma=0.000584 ! Fit after self-cal, rms=0.453128Jy sigma=0.000584 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.708 mas, bmaj=14.43 mas, bpa=34.52 degrees ! Estimated noise=5094.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.738134 Jy ! Component: 100 - total flux cleaned = 0.917696 Jy ! Component: 150 - total flux cleaned = 0.981202 Jy ! Component: 200 - total flux cleaned = 0.999138 Jy ! Total flux subtracted in 200 components = 0.999138 Jy ! Clean residual min=-0.029904 max=0.029802 Jy/beam ! Clean residual mean=-0.000260 rms=0.009474 Jy/beam ! Combined flux in latest and established models = 0.999138 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.999138 Jy ! Inverting map and beam ! Estimated beam: bmin=5.044 mas, bmaj=14.53 mas, bpa=34.23 degrees ! Estimated noise=4449.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119573 Jy ! Component: 100 - total flux cleaned = 0.0268934 Jy ! Component: 150 - total flux cleaned = 0.0407357 Jy ! Component: 200 - total flux cleaned = 0.0516097 Jy ! Total flux subtracted in 200 components = 0.0516097 Jy ! Clean residual min=-0.014962 max=0.015271 Jy/beam ! Clean residual mean=-0.000113 rms=0.004583 Jy/beam ! Combined flux in latest and established models = 1.05075 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 46 components and 1.05075 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.13 mas, bmaj=14.16 mas, bpa=31.26 degrees ! Estimated noise=4741.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121849 Jy ! Component: 100 - total flux cleaned = 0.0193791 Jy ! Component: 150 - total flux cleaned = 0.0244606 Jy ! Component: 200 - total flux cleaned = 0.0298356 Jy ! Total flux subtracted in 200 components = 0.0298356 Jy ! Clean residual min=-0.009837 max=0.008962 Jy/beam ! Clean residual mean=-0.000115 rms=0.003121 Jy/beam ! Combined flux in latest and established models = 1.08058 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459024 Jy ! Component: 100 - total flux cleaned = 0.00835442 Jy ! Component: 150 - total flux cleaned = 0.0105304 Jy ! Component: 200 - total flux cleaned = 0.012062 Jy ! Total flux subtracted in 200 components = 0.012062 Jy ! Clean residual min=-0.008644 max=0.007328 Jy/beam ! Clean residual mean=-0.000088 rms=0.002444 Jy/beam ! Combined flux in latest and established models = 1.09264 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 124 components and 1.09264 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.044 mas, bmaj=14.53 mas, bpa=34.23 degrees ! Estimated noise=4449.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134502 Jy ! Component: 100 - total flux cleaned = 0.0022853 Jy ! Component: 150 - total flux cleaned = 0.0039655 Jy ! Component: 200 - total flux cleaned = 0.00553407 Jy ! Total flux subtracted in 200 components = 0.00553407 Jy ! Clean residual min=-0.009155 max=0.007334 Jy/beam ! Clean residual mean=-0.000057 rms=0.002283 Jy/beam ! Combined flux in latest and established models = 1.09818 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 165 components and 1.09818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.456908Jy sigma=0.000595 ! Fit after self-cal, rms=0.457648Jy sigma=0.000594 wmodel J2134-0153_S_2017_01_16_pus_map.mod ! Writing 165 model components to file: J2134-0153_S_2017_01_16_pus_map.mod wobs J2134-0153_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2134-0153_S_2017_01_16_pus_uvs.fits wwins J2134-0153_S_2017_01_16_pus_map.win ! wwins: Wrote 4 windows to J2134-0153_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322197 Jy ! Component: 100 - total flux cleaned = -0.00528712 Jy ! Component: 150 - total flux cleaned = -0.00580071 Jy ! Component: 200 - total flux cleaned = -0.00639779 Jy ! Component: 250 - total flux cleaned = -0.00628241 Jy ! Component: 300 - total flux cleaned = -0.00595395 Jy ! Component: 350 - total flux cleaned = -0.00532282 Jy ! Component: 400 - total flux cleaned = -0.00460775 Jy ! Component: 450 - total flux cleaned = -0.00381157 Jy ! Component: 500 - total flux cleaned = -0.00303752 Jy ! Component: 550 - total flux cleaned = -0.00219024 Jy ! Component: 600 - total flux cleaned = -0.00173087 Jy ! Component: 650 - total flux cleaned = -0.00119185 Jy ! Component: 700 - total flux cleaned = -0.000576977 Jy ! Component: 750 - total flux cleaned = 0.000195664 Jy ! Component: 800 - total flux cleaned = 0.00112112 Jy ! Component: 850 - total flux cleaned = 0.00202708 Jy ! Component: 900 - total flux cleaned = 0.00259465 Jy ! Component: 950 - total flux cleaned = 0.0033108 Jy ! Component: 1000 - total flux cleaned = 0.00385764 Jy ! Component: 1050 - total flux cleaned = 0.00393465 Jy ! Component: 1100 - total flux cleaned = 0.00401001 Jy ! Component: 1150 - total flux cleaned = 0.00400867 Jy ! Component: 1200 - total flux cleaned = 0.0039338 Jy ! Component: 1250 - total flux cleaned = 0.00385882 Jy ! Component: 1300 - total flux cleaned = 0.00356924 Jy ! Component: 1350 - total flux cleaned = 0.00335535 Jy ! Component: 1400 - total flux cleaned = 0.00342585 Jy ! Component: 1450 - total flux cleaned = 0.00321595 Jy ! Component: 1500 - total flux cleaned = 0.0030777 Jy ! Component: 1550 - total flux cleaned = 0.00287325 Jy ! Component: 1600 - total flux cleaned = 0.00287358 Jy ! Component: 1650 - total flux cleaned = 0.00260479 Jy ! Component: 1700 - total flux cleaned = 0.00247133 Jy ! Component: 1750 - total flux cleaned = 0.00220509 Jy ! Component: 1800 - total flux cleaned = 0.00194051 Jy ! Component: 1850 - total flux cleaned = 0.00187422 Jy ! Component: 1900 - total flux cleaned = 0.0017425 Jy ! Component: 1950 - total flux cleaned = 0.00161136 Jy ! Component: 2000 - total flux cleaned = 0.00167673 Jy ! Component: 2050 - total flux cleaned = 0.00148129 Jy ! Component: 2100 - total flux cleaned = 0.0012866 Jy ! Component: 2150 - total flux cleaned = 0.0011568 Jy ! Component: 2200 - total flux cleaned = 0.000962028 Jy ! Component: 2250 - total flux cleaned = 0.000702924 Jy ! Component: 2300 - total flux cleaned = 0.000378848 Jy ! Component: 2350 - total flux cleaned = 0.000313938 Jy ! Component: 2400 - total flux cleaned = 0.000183931 Jy ! Component: 2450 - total flux cleaned = 0.000118328 Jy ! Component: 2500 - total flux cleaned = 5.26993e-05 Jy ! Component: 2550 - total flux cleaned = 0.00011794 Jy ! Component: 2600 - total flux cleaned = 5.2694e-05 Jy ! Component: 2650 - total flux cleaned = 5.20235e-05 Jy ! Component: 2700 - total flux cleaned = -8.04564e-05 Jy ! Component: 2750 - total flux cleaned = -8.08695e-05 Jy ! Component: 2800 - total flux cleaned = -0.000348344 Jy ! Component: 2850 - total flux cleaned = -0.000483173 Jy ! Component: 2900 - total flux cleaned = -0.000415245 Jy ! Component: 2950 - total flux cleaned = -0.000550986 Jy ! Component: 3000 - total flux cleaned = -0.000687736 Jy ! Component: 3050 - total flux cleaned = -0.000825097 Jy ! Component: 3100 - total flux cleaned = -0.00089391 Jy ! Component: 3150 - total flux cleaned = -0.000962856 Jy ! Component: 3200 - total flux cleaned = -0.00103262 Jy ! Component: 3250 - total flux cleaned = -0.00117388 Jy ! Component: 3300 - total flux cleaned = -0.00124468 Jy ! Component: 3350 - total flux cleaned = -0.00124467 Jy ! Component: 3400 - total flux cleaned = -0.00131649 Jy ! Component: 3450 - total flux cleaned = -0.00131655 Jy ! Component: 3500 - total flux cleaned = -0.00138987 Jy ! Component: 3550 - total flux cleaned = -0.00146403 Jy ! Component: 3600 - total flux cleaned = -0.00146412 Jy ! Component: 3650 - total flux cleaned = -0.0013897 Jy ! Component: 3700 - total flux cleaned = -0.00139009 Jy ! Component: 3750 - total flux cleaned = -0.00146564 Jy ! Component: 3800 - total flux cleaned = -0.00138866 Jy ! Component: 3850 - total flux cleaned = -0.00138866 Jy ! Component: 3900 - total flux cleaned = -0.00131049 Jy ! Component: 3950 - total flux cleaned = -0.00131 Jy ! Component: 4000 - total flux cleaned = -0.00131035 Jy ! Component: 4050 - total flux cleaned = -0.00122956 Jy ! Total flux subtracted in 4096 components = -0.00122978 Jy ! Clean residual min=-0.004896 max=0.005307 Jy/beam ! Clean residual mean=-0.000012 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 1.09695 Jy keep ! Adding 197 model components to the UV plane model. ! The established model now contains 362 components and 1.09695 Jy ![Exited script file: muppet] wmap "J2134-0153_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.044 x 14.53 at 34.23 degrees (North through East) ! Clean map min=-0.012055 max=0.9422 Jy/beam ! Writing clean map to FITS file: J2134-0153_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.942205 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00126394 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.40244 0.40244 0.80488 1.60976 3.21952 6.43904 12.8781 25.7561 51.5123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.942 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.044 x 14.53 at 34.23 degrees (North through East) ! Clean map min=-0.012055 max=0.9422 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134-0153_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:50 2019