! Started logfile: J2134+4050_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:51 2019 obs J2134+4050_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2134+4050_S_2017_01_16_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.610816 visibilities/baseline/integration-bin. ! Found source: J2134+4050 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 12424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2134+4050_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 240 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 515 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.857336Jy sigma=0.007374 ! Fit after self-cal, rms=0.848889Jy sigma=0.007336 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.728 mas, bmaj=6.338 mas, bpa=23.58 degrees ! Estimated noise=1168.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123245 Jy ! Component: 100 - total flux cleaned = 0.15012 Jy ! Total flux subtracted in 100 components = 0.15012 Jy ! Clean residual min=-0.004616 max=0.007497 Jy/beam ! Clean residual mean=-0.000006 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.15012 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.15012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111403Jy sigma=0.000668 ! Fit after self-cal, rms=0.111341Jy sigma=0.000668 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.432 mas, bmaj=6.928 mas, bpa=21.97 degrees ! Estimated noise=804.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062021 Jy ! Component: 100 - total flux cleaned = 0.00781005 Jy ! Component: 150 - total flux cleaned = 0.00851286 Jy ! Component: 200 - total flux cleaned = 0.00900838 Jy ! Total flux subtracted in 200 components = 0.00900838 Jy ! Clean residual min=-0.003601 max=0.004320 Jy/beam ! Clean residual mean=-0.000002 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.159129 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.159129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110972Jy sigma=0.000664 ! Fit after self-cal, rms=0.111003Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.95 HN 0.95 KP 0.97 ! LA 1.01 MK 1.00* NL 0.87 OV 0.96 ! PT 1.06 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00 KP 0.94 ! LA 0.99 MK 1.00* NL 0.98 OV 1.02 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 HN 0.98 KP 0.98 ! LA 1.01 MK 1.00* NL 0.97 OV 0.94 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.07 HN 0.96 KP 1.00* ! LA 1.10 MK 1.00* NL 1.00* OV 0.98 ! PT 1.03 SC 0.89 ! ! ! Fit before self-cal, rms=0.111003Jy sigma=0.000664 ! Fit after self-cal, rms=0.106663Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.412 mas, bmaj=6.919 mas, bpa=21.36 degrees ! Estimated noise=800.298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194817 Jy ! Component: 100 - total flux cleaned = 0.0024507 Jy ! Component: 150 - total flux cleaned = 0.00289949 Jy ! Component: 200 - total flux cleaned = 0.0031237 Jy ! Total flux subtracted in 200 components = 0.0031237 Jy ! Clean residual min=-0.002076 max=0.002780 Jy/beam ! Clean residual mean=-0.000002 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.162252 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.162252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106565Jy sigma=0.000653 ! Fit after self-cal, rms=0.106559Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106559Jy sigma=0.000653 ! Fit after self-cal, rms=0.104426Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.41 mas, bmaj=6.926 mas, bpa=21.19 degrees ! Estimated noise=800.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759891 Jy ! Component: 100 - total flux cleaned = 0.00088333 Jy ! Component: 150 - total flux cleaned = 0.000909942 Jy ! Component: 200 - total flux cleaned = 0.000909827 Jy ! Total flux subtracted in 200 components = 0.000909827 Jy ! Clean residual min=-0.001728 max=0.002011 Jy/beam ! Clean residual mean=0.000004 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.163162 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.163162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104400Jy sigma=0.000651 ! Fit after self-cal, rms=0.104406Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-63.5, 40.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000712768 Jy ! Component: 100 - total flux cleaned = 0.000680054 Jy ! Component: 150 - total flux cleaned = 0.000370183 Jy ! Component: 200 - total flux cleaned = 0.000251001 Jy ! Total flux subtracted in 200 components = 0.000251001 Jy ! Clean residual min=-0.001641 max=0.001716 Jy/beam ! Clean residual mean=0.000003 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.163413 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 71 components and 0.163413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104339Jy sigma=0.000650 ! Fit after self-cal, rms=0.104306Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104306Jy sigma=0.000650 ! Fit after self-cal, rms=0.104057Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.409 mas, bmaj=6.918 mas, bpa=21.1 degrees ! Estimated noise=801.606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000451787 Jy ! Component: 100 - total flux cleaned = 0.000515872 Jy ! Component: 150 - total flux cleaned = 0.000436855 Jy ! Component: 200 - total flux cleaned = 0.00033836 Jy ! Total flux subtracted in 200 components = 0.00033836 Jy ! Clean residual min=-0.001647 max=0.001591 Jy/beam ! Clean residual mean=0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.163751 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.163751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104024Jy sigma=0.000650 ! Fit after self-cal, rms=0.104006Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191287 Jy ! Component: 100 - total flux cleaned = 0.000146103 Jy ! Component: 150 - total flux cleaned = 8.01785e-05 Jy ! Component: 200 - total flux cleaned = -3.59992e-06 Jy ! Total flux subtracted in 200 components = -3.59992e-06 Jy ! Clean residual min=-0.001618 max=0.001565 Jy/beam ! Clean residual mean=0.000003 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.163748 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 87 components and 0.163748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103985Jy sigma=0.000650 ! Fit after self-cal, rms=0.103973Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103973Jy sigma=0.000650 ! Fit after self-cal, rms=0.103841Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.449 mas, bmaj=9.142 mas, bpa=1.058 degrees ! Estimated noise=938.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00015797 Jy ! Component: 100 - total flux cleaned = -0.000407162 Jy ! Component: 150 - total flux cleaned = -0.000518683 Jy ! Component: 200 - total flux cleaned = -0.000583045 Jy ! Total flux subtracted in 200 components = -0.000583045 Jy ! Clean residual min=-0.001676 max=0.001629 Jy/beam ! Clean residual mean=0.000006 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.163165 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 103 components and 0.163165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103838Jy sigma=0.000650 ! Fit after self-cal, rms=0.103840Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.68092e-05 Jy ! Component: 100 - total flux cleaned = -6.16206e-05 Jy ! Component: 150 - total flux cleaned = -7.60179e-05 Jy ! Component: 200 - total flux cleaned = -0.000102306 Jy ! Total flux subtracted in 200 components = -0.000102306 Jy ! Clean residual min=-0.001663 max=0.001639 Jy/beam ! Clean residual mean=0.000006 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.163062 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 118 components and 0.163062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103839Jy sigma=0.000650 ! Fit after self-cal, rms=0.103839Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.409 mas, bmaj=6.913 mas, bpa=21.06 degrees ! Estimated noise=802.465 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.409 x 6.913 at 21.06 degrees (North through East) ! Clean map min=-0.0017228 max=0.15669 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.706 mas, bmaj=6.32 mas, bpa=23.02 degrees ! Estimated noise=1161.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122533 Jy ! Component: 100 - total flux cleaned = 0.149254 Jy ! Component: 150 - total flux cleaned = 0.155746 Jy ! Component: 200 - total flux cleaned = 0.158391 Jy ! Total flux subtracted in 200 components = 0.158391 Jy ! Clean residual min=-0.002788 max=0.002913 Jy/beam ! Clean residual mean=-0.000000 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.158391 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.158391 Jy ! Inverting map and beam ! Estimated beam: bmin=4.409 mas, bmaj=6.913 mas, bpa=21.06 degrees ! Estimated noise=802.465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257247 Jy ! Component: 100 - total flux cleaned = 0.00364929 Jy ! Component: 150 - total flux cleaned = 0.00448023 Jy ! Component: 200 - total flux cleaned = 0.00481163 Jy ! Total flux subtracted in 200 components = 0.00481163 Jy ! Clean residual min=-0.002015 max=0.001734 Jy/beam ! Clean residual mean=0.000002 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.163203 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.163203 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.449 mas, bmaj=9.142 mas, bpa=1.058 degrees ! Estimated noise=938.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167729 Jy ! Component: 100 - total flux cleaned = -0.000100337 Jy ! Component: 150 - total flux cleaned = -0.000311822 Jy ! Component: 200 - total flux cleaned = -0.000411649 Jy ! Total flux subtracted in 200 components = -0.000411649 Jy ! Clean residual min=-0.001735 max=0.001666 Jy/beam ! Clean residual mean=0.000005 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.162791 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.60417e-05 Jy ! Component: 100 - total flux cleaned = -8.77277e-05 Jy ! Component: 150 - total flux cleaned = -8.84215e-05 Jy ! Component: 200 - total flux cleaned = -0.000106828 Jy ! Total flux subtracted in 200 components = -0.000106828 Jy ! Clean residual min=-0.001696 max=0.001653 Jy/beam ! Clean residual mean=0.000005 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.162684 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 75 components and 0.162684 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.409 mas, bmaj=6.913 mas, bpa=21.06 degrees ! Estimated noise=802.465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268077 Jy ! Component: 100 - total flux cleaned = 0.000367026 Jy ! Component: 150 - total flux cleaned = 0.000456778 Jy ! Component: 200 - total flux cleaned = 0.000538622 Jy ! Total flux subtracted in 200 components = 0.000538622 Jy ! Clean residual min=-0.001672 max=0.001494 Jy/beam ! Clean residual mean=0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.163223 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.163223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103847Jy sigma=0.000650 ! Fit after self-cal, rms=0.103807Jy sigma=0.000650 wmodel J2134+4050_S_2017_01_16_pus_map.mod ! Writing 93 model components to file: J2134+4050_S_2017_01_16_pus_map.mod wobs J2134+4050_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2134+4050_S_2017_01_16_pus_uvs.fits wwins J2134+4050_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J2134+4050_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433972 Jy ! Component: 100 - total flux cleaned = -0.000434943 Jy ! Component: 150 - total flux cleaned = -0.000460301 Jy ! Component: 200 - total flux cleaned = -0.000535504 Jy ! Component: 250 - total flux cleaned = -0.000584417 Jy ! Component: 300 - total flux cleaned = -0.00053665 Jy ! Component: 350 - total flux cleaned = -0.000513321 Jy ! Component: 400 - total flux cleaned = -0.000400497 Jy ! Component: 450 - total flux cleaned = -0.000334051 Jy ! Component: 500 - total flux cleaned = -0.000312394 Jy ! Component: 550 - total flux cleaned = -0.000269382 Jy ! Component: 600 - total flux cleaned = -0.000227067 Jy ! Component: 650 - total flux cleaned = -0.000164891 Jy ! Component: 700 - total flux cleaned = -0.000103876 Jy ! Component: 750 - total flux cleaned = -0.000103746 Jy ! Component: 800 - total flux cleaned = -8.39374e-05 Jy ! Component: 850 - total flux cleaned = -8.41095e-05 Jy ! Component: 900 - total flux cleaned = -0.000121643 Jy ! Component: 950 - total flux cleaned = -8.43147e-05 Jy ! Component: 1000 - total flux cleaned = -8.4317e-05 Jy ! Component: 1050 - total flux cleaned = -4.82747e-05 Jy ! Component: 1100 - total flux cleaned = -8.41196e-05 Jy ! Component: 1150 - total flux cleaned = -3.10871e-05 Jy ! Component: 1200 - total flux cleaned = -3.11423e-05 Jy ! Component: 1250 - total flux cleaned = -3.10536e-05 Jy ! Component: 1300 - total flux cleaned = -8.16468e-05 Jy ! Component: 1350 - total flux cleaned = -4.84317e-05 Jy ! Component: 1400 - total flux cleaned = -4.80033e-05 Jy ! Component: 1450 - total flux cleaned = 1.71258e-05 Jy ! Component: 1500 - total flux cleaned = 7.70842e-07 Jy ! Component: 1550 - total flux cleaned = -1.5019e-05 Jy ! Component: 1600 - total flux cleaned = -4.64171e-05 Jy ! Component: 1650 - total flux cleaned = -4.63875e-05 Jy ! Component: 1700 - total flux cleaned = -0.000107717 Jy ! Component: 1750 - total flux cleaned = -0.0001228 Jy ! Component: 1800 - total flux cleaned = -0.000137947 Jy ! Component: 1850 - total flux cleaned = -0.000167774 Jy ! Component: 1900 - total flux cleaned = -0.000241074 Jy ! Component: 1950 - total flux cleaned = -0.000284466 Jy ! Component: 2000 - total flux cleaned = -0.00027011 Jy ! Component: 2050 - total flux cleaned = -0.000327367 Jy ! Component: 2100 - total flux cleaned = -0.000327459 Jy ! Component: 2150 - total flux cleaned = -0.000439118 Jy ! Component: 2200 - total flux cleaned = -0.00045275 Jy ! Component: 2250 - total flux cleaned = -0.000425428 Jy ! Component: 2300 - total flux cleaned = -0.000452671 Jy ! Component: 2350 - total flux cleaned = -0.000520073 Jy ! Component: 2400 - total flux cleaned = -0.000533418 Jy ! Component: 2450 - total flux cleaned = -0.000520194 Jy ! Component: 2500 - total flux cleaned = -0.000611757 Jy ! Component: 2550 - total flux cleaned = -0.000611924 Jy ! Component: 2600 - total flux cleaned = -0.000637603 Jy ! Component: 2650 - total flux cleaned = -0.000662997 Jy ! Component: 2700 - total flux cleaned = -0.000700895 Jy ! Component: 2750 - total flux cleaned = -0.00071348 Jy ! Component: 2800 - total flux cleaned = -0.000775797 Jy ! Component: 2850 - total flux cleaned = -0.000800494 Jy ! Component: 2900 - total flux cleaned = -0.000763862 Jy ! Component: 2950 - total flux cleaned = -0.000751864 Jy ! Component: 3000 - total flux cleaned = -0.000800035 Jy ! Component: 3050 - total flux cleaned = -0.00078816 Jy ! Component: 3100 - total flux cleaned = -0.000835651 Jy ! Component: 3150 - total flux cleaned = -0.000870987 Jy ! Component: 3200 - total flux cleaned = -0.00085936 Jy ! Component: 3250 - total flux cleaned = -0.000917397 Jy ! Component: 3300 - total flux cleaned = -0.00092887 Jy ! Component: 3350 - total flux cleaned = -0.000940359 Jy ! Component: 3400 - total flux cleaned = -0.000974418 Jy ! Component: 3450 - total flux cleaned = -0.000985764 Jy ! Component: 3500 - total flux cleaned = -0.00106445 Jy ! Component: 3550 - total flux cleaned = -0.00105327 Jy ! Component: 3600 - total flux cleaned = -0.00109767 Jy ! Component: 3650 - total flux cleaned = -0.00113071 Jy ! Component: 3700 - total flux cleaned = -0.00116351 Jy ! Component: 3750 - total flux cleaned = -0.00119614 Jy ! Component: 3800 - total flux cleaned = -0.00125014 Jy ! Component: 3850 - total flux cleaned = -0.00127157 Jy ! Component: 3900 - total flux cleaned = -0.00132489 Jy ! Component: 3950 - total flux cleaned = -0.00138852 Jy ! Component: 4000 - total flux cleaned = -0.00137797 Jy ! Component: 4050 - total flux cleaned = -0.00146189 Jy ! Total flux subtracted in 4096 components = -0.0015035 Jy ! Clean residual min=-0.000567 max=0.000551 Jy/beam ! Clean residual mean=0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.161719 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 364 components and 0.161719 Jy ![Exited script file: muppet] wmap "J2134+4050_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.409 x 6.913 at 21.06 degrees (North through East) ! Clean map min=-0.0014434 max=0.15658 Jy/beam ! Writing clean map to FITS file: J2134+4050_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156579 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000188198 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.360581 0.360581 0.721161 1.44232 2.88464 5.76929 11.5386 23.0772 46.1543 92.3086 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.409 x 6.913 at 21.06 degrees (North through East) ! Clean map min=-0.0014434 max=0.15658 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2134+4050_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:56 2019