! Started logfile: J2133+8239_S_2017_08_12_pus_uvs.log on Fri May 10 15:08:30 2019 obs J2133+8239_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2133+8239_S_2017_08_12_pus_uva.fits ! AN table 1: 190 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88 visibilities/baseline/integration-bin. ! Found source: J2133+8239 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 30096 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2133+8239_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 153 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1080 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.871398Jy sigma=0.007103 ! Fit after self-cal, rms=0.846453Jy sigma=0.006909 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=3.984 mas, bpa=-42.5 degrees ! Estimated noise=994.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114454 Jy ! Component: 100 - total flux cleaned = 0.153961 Jy ! Total flux subtracted in 100 components = 0.153961 Jy ! Clean residual min=-0.008031 max=0.020207 Jy/beam ! Clean residual mean=-0.000153 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.153961 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.153961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103804Jy sigma=0.000832 ! Fit after self-cal, rms=0.103594Jy sigma=0.000830 ! Inverting map ! Added new window around map position (3.5, -4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0227059 Jy ! Component: 100 - total flux cleaned = 0.0371067 Jy ! Total flux subtracted in 100 components = 0.0371067 Jy ! Clean residual min=-0.006385 max=0.010328 Jy/beam ! Clean residual mean=-0.000091 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.191067 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 0.191067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096065Jy sigma=0.000763 ! Fit after self-cal, rms=0.095909Jy sigma=0.000761 ! Inverting map ! Added new window around map position (6.5, -9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122759 Jy ! Component: 100 - total flux cleaned = 0.0212674 Jy ! Total flux subtracted in 100 components = 0.0212674 Jy ! Clean residual min=-0.005729 max=0.009126 Jy/beam ! Clean residual mean=-0.000058 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.212335 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 51 components and 0.212335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093275Jy sigma=0.000737 ! Fit after self-cal, rms=0.093193Jy sigma=0.000737 ! Inverting map ! Added new window around map position (21.5, -28.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00951697 Jy ! Component: 100 - total flux cleaned = 0.0166596 Jy ! Total flux subtracted in 100 components = 0.0166596 Jy ! Clean residual min=-0.004956 max=0.006897 Jy/beam ! Clean residual mean=-0.000050 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.228994 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 70 components and 0.228994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091498Jy sigma=0.000721 ! Fit after self-cal, rms=0.091391Jy sigma=0.000720 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=4.878 mas, bpa=-37.61 degrees ! Estimated noise=569.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127086 Jy ! Component: 100 - total flux cleaned = 0.0221915 Jy ! Component: 150 - total flux cleaned = 0.0297652 Jy ! Component: 200 - total flux cleaned = 0.0359849 Jy ! Total flux subtracted in 200 components = 0.0359849 Jy ! Clean residual min=-0.004858 max=0.006090 Jy/beam ! Clean residual mean=-0.000087 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.264979 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 124 components and 0.264979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088949Jy sigma=0.000698 ! Fit after self-cal, rms=0.088651Jy sigma=0.000695 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.98 KP 1.04 ! LA 0.97 MK 1.05 NL 0.89 OV 1.00 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.02 KP 0.98 ! LA 0.95 MK 1.00 NL 1.05 OV 1.15 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 1.03 KP 0.98 ! LA 0.95 MK 1.09 NL 0.99 OV 0.97 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.04 KP 1.00* ! LA 0.99 MK 0.88 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.088651Jy sigma=0.000695 ! Fit after self-cal, rms=0.086102Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=4.916 mas, bpa=-37.44 degrees ! Estimated noise=557.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685213 Jy ! Component: 100 - total flux cleaned = 0.0117493 Jy ! Component: 150 - total flux cleaned = 0.0156461 Jy ! Component: 200 - total flux cleaned = 0.0178529 Jy ! Total flux subtracted in 200 components = 0.0178529 Jy ! Clean residual min=-0.004292 max=0.004147 Jy/beam ! Clean residual mean=-0.000006 rms=0.000984 Jy/beam ! Combined flux in latest and established models = 0.282832 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 161 components and 0.282832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085409Jy sigma=0.000680 ! Fit after self-cal, rms=0.085343Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085343Jy sigma=0.000679 ! Fit after self-cal, rms=0.085732Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=4.91 mas, bpa=-37.43 degrees ! Estimated noise=561.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302264 Jy ! Component: 100 - total flux cleaned = 0.00482566 Jy ! Component: 150 - total flux cleaned = 0.00625959 Jy ! Component: 200 - total flux cleaned = 0.00743069 Jy ! Total flux subtracted in 200 components = 0.00743069 Jy ! Clean residual min=-0.002801 max=0.003893 Jy/beam ! Clean residual mean=0.000015 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.290263 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 189 components and 0.290263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085527Jy sigma=0.000666 ! Fit after self-cal, rms=0.085528Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00420488 Jy ! Component: 100 - total flux cleaned = 0.00678093 Jy ! Component: 150 - total flux cleaned = 0.00824854 Jy ! Component: 200 - total flux cleaned = 0.00922635 Jy ! Total flux subtracted in 200 components = 0.00922635 Jy ! Clean residual min=-0.002380 max=0.002667 Jy/beam ! Clean residual mean=0.000021 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.299489 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 231 components and 0.299489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085297Jy sigma=0.000663 ! Fit after self-cal, rms=0.085259Jy sigma=0.000663 ! Inverting map ! Added new window around map position (13.5, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269467 Jy ! Component: 100 - total flux cleaned = 0.00382101 Jy ! Component: 150 - total flux cleaned = 0.00469736 Jy ! Component: 200 - total flux cleaned = 0.00535502 Jy ! Total flux subtracted in 200 components = 0.00535502 Jy ! Clean residual min=-0.002165 max=0.002227 Jy/beam ! Clean residual mean=0.000030 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.304844 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 260 components and 0.304844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085132Jy sigma=0.000662 ! Fit after self-cal, rms=0.085120Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085120Jy sigma=0.000662 ! Fit after self-cal, rms=0.085087Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=4.915 mas, bpa=-37.81 degrees ! Estimated noise=560.111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194663 Jy ! Component: 100 - total flux cleaned = 0.00327312 Jy ! Component: 150 - total flux cleaned = 0.00428785 Jy ! Component: 200 - total flux cleaned = 0.00517908 Jy ! Total flux subtracted in 200 components = 0.00517908 Jy ! Clean residual min=-0.002112 max=0.002021 Jy/beam ! Clean residual mean=0.000020 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.310023 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 293 components and 0.310023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084994Jy sigma=0.000660 ! Fit after self-cal, rms=0.084984Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705313 Jy ! Component: 100 - total flux cleaned = 0.0013846 Jy ! Component: 150 - total flux cleaned = 0.00191212 Jy ! Component: 200 - total flux cleaned = 0.00243285 Jy ! Total flux subtracted in 200 components = 0.00243285 Jy ! Clean residual min=-0.001909 max=0.001937 Jy/beam ! Clean residual mean=0.000024 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.312456 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 304 components and 0.312456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084939Jy sigma=0.000660 ! Fit after self-cal, rms=0.084935Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084935Jy sigma=0.000660 ! Fit after self-cal, rms=0.085026Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.308 mas, bmaj=9.705 mas, bpa=-34.7 degrees ! Estimated noise=697.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186444 Jy ! Component: 100 - total flux cleaned = 0.00308792 Jy ! Component: 150 - total flux cleaned = 0.00407604 Jy ! Component: 200 - total flux cleaned = 0.00484411 Jy ! Total flux subtracted in 200 components = 0.00484411 Jy ! Clean residual min=-0.002129 max=0.002227 Jy/beam ! Clean residual mean=0.000039 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.3173 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 352 components and 0.3173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084992Jy sigma=0.000659 ! Fit after self-cal, rms=0.084984Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367896 Jy ! Component: 100 - total flux cleaned = 0.00105048 Jy ! Component: 150 - total flux cleaned = 0.00162242 Jy ! Component: 200 - total flux cleaned = 0.00207361 Jy ! Total flux subtracted in 200 components = 0.00207361 Jy ! Clean residual min=-0.002009 max=0.002226 Jy/beam ! Clean residual mean=0.000045 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.319373 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 370 components and 0.319373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084974Jy sigma=0.000659 ! Fit after self-cal, rms=0.084967Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=4.921 mas, bpa=-37.98 degrees ! Estimated noise=559.912 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.849 x 4.921 at -37.98 degrees (North through East) ! Clean map min=-0.0018175 max=0.14279 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=4.004 mas, bpa=-41.8 degrees ! Estimated noise=995.683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113893 Jy ! Component: 100 - total flux cleaned = 0.154101 Jy ! Component: 150 - total flux cleaned = 0.175271 Jy ! Component: 200 - total flux cleaned = 0.190175 Jy ! Total flux subtracted in 200 components = 0.190175 Jy ! Clean residual min=-0.004891 max=0.008807 Jy/beam ! Clean residual mean=-0.000069 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 0.190175 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.190175 Jy ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=4.921 mas, bpa=-37.98 degrees ! Estimated noise=559.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207686 Jy ! Component: 100 - total flux cleaned = 0.0365461 Jy ! Component: 150 - total flux cleaned = 0.0490938 Jy ! Component: 200 - total flux cleaned = 0.0594537 Jy ! Total flux subtracted in 200 components = 0.0594537 Jy ! Clean residual min=-0.003720 max=0.007000 Jy/beam ! Clean residual mean=-0.000072 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.249628 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 122 components and 0.249628 Jy ! Inverting map ! Added new window around map position (22, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0087677 Jy ! Component: 100 - total flux cleaned = 0.0161787 Jy ! Component: 150 - total flux cleaned = 0.0225639 Jy ! Component: 200 - total flux cleaned = 0.0281271 Jy ! Total flux subtracted in 200 components = 0.0281271 Jy ! Clean residual min=-0.002846 max=0.003562 Jy/beam ! Clean residual mean=-0.000029 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.277755 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 202 components and 0.277755 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.308 mas, bmaj=9.705 mas, bpa=-34.7 degrees ! Estimated noise=697.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091159 Jy ! Component: 100 - total flux cleaned = 0.0159686 Jy ! Component: 150 - total flux cleaned = 0.0213055 Jy ! Component: 200 - total flux cleaned = 0.0255379 Jy ! Total flux subtracted in 200 components = 0.0255379 Jy ! Clean residual min=-0.003009 max=0.002704 Jy/beam ! Clean residual mean=-0.000001 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.303293 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340246 Jy ! Component: 100 - total flux cleaned = 0.00617025 Jy ! Component: 150 - total flux cleaned = 0.0084373 Jy ! Component: 200 - total flux cleaned = 0.010306 Jy ! Total flux subtracted in 200 components = 0.010306 Jy ! Clean residual min=-0.002384 max=0.002395 Jy/beam ! Clean residual mean=0.000027 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.313599 Jy ! Adding 194 model components to the UV plane model. ! The established model now contains 381 components and 0.313599 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.849 mas, bmaj=4.921 mas, bpa=-37.98 degrees ! Estimated noise=559.912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018297 Jy ! Component: 100 - total flux cleaned = 0.00282052 Jy ! Component: 150 - total flux cleaned = 0.00345551 Jy ! Component: 200 - total flux cleaned = 0.00386823 Jy ! Total flux subtracted in 200 components = 0.00386823 Jy ! Clean residual min=-0.001795 max=0.001885 Jy/beam ! Clean residual mean=0.000020 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.317467 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 411 components and 0.317468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085002Jy sigma=0.000659 ! Fit after self-cal, rms=0.084957Jy sigma=0.000659 wmodel J2133+8239_S_2017_08_12_pus_map.mod ! Writing 411 model components to file: J2133+8239_S_2017_08_12_pus_map.mod wobs J2133+8239_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2133+8239_S_2017_08_12_pus_uvs.fits wwins J2133+8239_S_2017_08_12_pus_map.win ! wwins: Wrote 9 windows to J2133+8239_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110388 Jy ! Component: 100 - total flux cleaned = 0.000109194 Jy ! Component: 150 - total flux cleaned = 2.06927e-05 Jy ! Component: 200 - total flux cleaned = 4.89067e-05 Jy ! Component: 250 - total flux cleaned = 2.06197e-05 Jy ! Component: 300 - total flux cleaned = 1.97186e-05 Jy ! Component: 350 - total flux cleaned = -3.30704e-05 Jy ! Component: 400 - total flux cleaned = -5.87002e-05 Jy ! Component: 450 - total flux cleaned = -0.000109 Jy ! Component: 500 - total flux cleaned = -5.92078e-05 Jy ! Component: 550 - total flux cleaned = 1.38239e-05 Jy ! Component: 600 - total flux cleaned = 0.000109427 Jy ! Component: 650 - total flux cleaned = 0.000132651 Jy ! Component: 700 - total flux cleaned = 0.000156121 Jy ! Component: 750 - total flux cleaned = 0.00022469 Jy ! Component: 800 - total flux cleaned = 0.000202191 Jy ! Component: 850 - total flux cleaned = 0.000224624 Jy ! Component: 900 - total flux cleaned = 0.000290148 Jy ! Component: 950 - total flux cleaned = 0.00029036 Jy ! Component: 1000 - total flux cleaned = 0.00033345 Jy ! Component: 1050 - total flux cleaned = 0.000396734 Jy ! Component: 1100 - total flux cleaned = 0.000438572 Jy ! Component: 1150 - total flux cleaned = 0.000541429 Jy ! Component: 1200 - total flux cleaned = 0.000581993 Jy ! Component: 1250 - total flux cleaned = 0.000642479 Jy ! Component: 1300 - total flux cleaned = 0.000761293 Jy ! Component: 1350 - total flux cleaned = 0.000761166 Jy ! Component: 1400 - total flux cleaned = 0.000780838 Jy ! Component: 1450 - total flux cleaned = 0.000876106 Jy ! Component: 1500 - total flux cleaned = 0.000838085 Jy ! Component: 1550 - total flux cleaned = 0.000894519 Jy ! Component: 1600 - total flux cleaned = 0.000968617 Jy ! Component: 1650 - total flux cleaned = 0.000968295 Jy ! Component: 1700 - total flux cleaned = 0.00102253 Jy ! Component: 1750 - total flux cleaned = 0.000986525 Jy ! Component: 1800 - total flux cleaned = 0.00105769 Jy ! Component: 1850 - total flux cleaned = 0.00114565 Jy ! Component: 1900 - total flux cleaned = 0.00112819 Jy ! Component: 1950 - total flux cleaned = 0.00123188 Jy ! Component: 2000 - total flux cleaned = 0.00128339 Jy ! Component: 2050 - total flux cleaned = 0.00138512 Jy ! Component: 2100 - total flux cleaned = 0.00138482 Jy ! Component: 2150 - total flux cleaned = 0.00156804 Jy ! Component: 2200 - total flux cleaned = 0.0015351 Jy ! Component: 2250 - total flux cleaned = 0.00156791 Jy ! Component: 2300 - total flux cleaned = 0.00160037 Jy ! Component: 2350 - total flux cleaned = 0.00164872 Jy ! Component: 2400 - total flux cleaned = 0.00174432 Jy ! Component: 2450 - total flux cleaned = 0.00174429 Jy ! Component: 2500 - total flux cleaned = 0.00182276 Jy ! Component: 2550 - total flux cleaned = 0.00182263 Jy ! Component: 2600 - total flux cleaned = 0.00186913 Jy ! Component: 2650 - total flux cleaned = 0.00196106 Jy ! Component: 2700 - total flux cleaned = 0.00200661 Jy ! Component: 2750 - total flux cleaned = 0.0020217 Jy ! Component: 2800 - total flux cleaned = 0.00209633 Jy ! Component: 2850 - total flux cleaned = 0.00214085 Jy ! Component: 2900 - total flux cleaned = 0.00221454 Jy ! Component: 2950 - total flux cleaned = 0.00228754 Jy ! Component: 3000 - total flux cleaned = 0.00233103 Jy ! Component: 3050 - total flux cleaned = 0.00238876 Jy ! Component: 3100 - total flux cleaned = 0.00243174 Jy ! Component: 3150 - total flux cleaned = 0.0025171 Jy ! Component: 3200 - total flux cleaned = 0.00262977 Jy ! Component: 3250 - total flux cleaned = 0.00269982 Jy ! Component: 3300 - total flux cleaned = 0.00272768 Jy ! Component: 3350 - total flux cleaned = 0.00276917 Jy ! Component: 3400 - total flux cleaned = 0.00289256 Jy ! Component: 3450 - total flux cleaned = 0.00291984 Jy ! Component: 3500 - total flux cleaned = 0.00304173 Jy ! Component: 3550 - total flux cleaned = 0.00305522 Jy ! Component: 3600 - total flux cleaned = 0.00317576 Jy ! Component: 3650 - total flux cleaned = 0.00321565 Jy ! Component: 3700 - total flux cleaned = 0.00330826 Jy ! Component: 3750 - total flux cleaned = 0.00329513 Jy ! Component: 3800 - total flux cleaned = 0.00330841 Jy ! Component: 3850 - total flux cleaned = 0.00336047 Jy ! Component: 3900 - total flux cleaned = 0.00347669 Jy ! Component: 3950 - total flux cleaned = 0.00348958 Jy ! Component: 4000 - total flux cleaned = 0.0035151 Jy ! Component: 4050 - total flux cleaned = 0.00356605 Jy ! Total flux subtracted in 4096 components = 0.00365446 Jy ! Clean residual min=-0.000682 max=0.000755 Jy/beam ! Clean residual mean=0.000011 rms=0.000236 Jy/beam ! Combined flux in latest and established models = 0.321122 Jy keep ! Adding 331 model components to the UV plane model. ! The established model now contains 742 components and 0.321122 Jy ![Exited script file: muppet] wmap "J2133+8239_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.849 x 4.921 at -37.98 degrees (North through East) ! Clean map min=-0.0013224 max=0.14229 Jy/beam ! Writing clean map to FITS file: J2133+8239_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142289 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000234698 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.494835 0.494835 0.989669 1.97934 3.95868 7.91735 15.8347 31.6694 63.3388 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.849 x 4.921 at -37.98 degrees (North through East) ! Clean map min=-0.0013224 max=0.14229 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2133+8239_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:08:37 2019