! Started logfile: J2131+8430_X_2017_08_05_pus_uvs.log on Thu May 9 18:59:46 2019 obs J2131+8430_X_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2131+8430_X_2017_08_05_pus_uva.fits ! AN table 1: 320 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.983333 visibilities/baseline/integration-bin. ! Found source: J2131+8430 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 575 lines of history. ! ! Reading 169920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2131+8430_X_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.951093Jy sigma=0.007506 ! Fit after self-cal, rms=0.924884Jy sigma=0.007317 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8021 mas, bmaj=0.8785 mas, bpa=-69.54 degrees ! Estimated noise=564.177 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514676 Jy ! Component: 100 - total flux cleaned = 0.0733645 Jy ! Total flux subtracted in 100 components = 0.0733645 Jy ! Clean residual min=-0.004934 max=0.015569 Jy/beam ! Clean residual mean=-0.000024 rms=0.001410 Jy/beam ! Combined flux in latest and established models = 0.0733645 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0733645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099549Jy sigma=0.000741 ! Fit after self-cal, rms=0.099142Jy sigma=0.000738 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-0.4, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163128 Jy ! Component: 100 - total flux cleaned = 0.026319 Jy ! Total flux subtracted in 100 components = 0.026319 Jy ! Clean residual min=-0.003712 max=0.009066 Jy/beam ! Clean residual mean=-0.000021 rms=0.001051 Jy/beam ! Combined flux in latest and established models = 0.0996835 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0996835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094696Jy sigma=0.000698 ! Fit after self-cal, rms=0.094405Jy sigma=0.000696 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898853 Jy ! Component: 100 - total flux cleaned = 0.0141438 Jy ! Total flux subtracted in 100 components = 0.0141438 Jy ! Clean residual min=-0.003090 max=0.008690 Jy/beam ! Clean residual mean=-0.000019 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.113827 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.113827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093028Jy sigma=0.000684 ! Fit after self-cal, rms=0.092902Jy sigma=0.000684 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (7, -12.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956028 Jy ! Component: 100 - total flux cleaned = 0.0157343 Jy ! Total flux subtracted in 100 components = 0.0157343 Jy ! Clean residual min=-0.002662 max=0.004678 Jy/beam ! Clean residual mean=-0.000012 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.129562 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 0.129562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091312Jy sigma=0.000669 ! Fit after self-cal, rms=0.091115Jy sigma=0.000667 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (6, -12.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632388 Jy ! Component: 100 - total flux cleaned = 0.0107982 Jy ! Total flux subtracted in 100 components = 0.0107982 Jy ! Clean residual min=-0.002259 max=0.003109 Jy/beam ! Clean residual mean=-0.000008 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.14036 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.14036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090392Jy sigma=0.000661 ! Fit after self-cal, rms=0.090313Jy sigma=0.000660 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.06 mas, bmaj=1.119 mas, bpa=-69.82 degrees ! Estimated noise=220.497 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00684713 Jy ! Component: 100 - total flux cleaned = 0.0113424 Jy ! Component: 150 - total flux cleaned = 0.0146138 Jy ! Component: 200 - total flux cleaned = 0.0170435 Jy ! Total flux subtracted in 200 components = 0.0170435 Jy ! Clean residual min=-0.002057 max=0.002936 Jy/beam ! Clean residual mean=-0.000017 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.157403 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 73 components and 0.157403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089679Jy sigma=0.000655 ! Fit after self-cal, rms=0.089589Jy sigma=0.000654 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.97 KP 1.06 ! LA 0.94 MK 0.91 NL 0.89 OV 1.09 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.03 HN 1.01 KP 0.98 ! LA 0.94 MK 1.16 NL 0.88 OV 1.08 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.99 KP 0.93 ! LA 0.95 MK 0.96 NL 0.90 OV 1.09 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.00 KP 0.89 ! LA 0.96 MK 0.96 NL 0.88 OV 1.09 ! PT 0.96 SC 1.12 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 0.98 KP 0.82 ! LA 0.96 MK 0.99 NL 0.92 OV 1.10 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.11 KP 0.81 ! LA 0.94 MK 0.96 NL 0.92 OV 1.13 ! PT 0.95 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.05 KP 0.80 ! LA 0.95 MK 0.99 NL 0.91 OV 1.17 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.06 HN 1.07 KP 0.82 ! LA 0.94 MK 0.92 NL 0.92 OV 1.17 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 HN 0.99 KP 0.86 ! LA 0.96 MK 0.93 NL 0.92 OV 1.15 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.03 KP 0.89 ! LA 0.96 MK 0.91 NL 0.95 OV 1.14 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.03 HN 1.03 KP 0.93 ! LA 0.97 MK 0.92 NL 0.96 OV 1.10 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.04 HN 1.04 KP 1.02 ! LA 0.98 MK 0.84 NL 0.95 OV 1.12 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.089589Jy sigma=0.000654 ! Fit after self-cal, rms=0.087045Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.059 mas, bmaj=1.12 mas, bpa=-69.88 degrees ! Estimated noise=216.477 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178525 Jy ! Component: 100 - total flux cleaned = 0.00234242 Jy ! Component: 150 - total flux cleaned = 0.00281498 Jy ! Component: 200 - total flux cleaned = 0.00314429 Jy ! Total flux subtracted in 200 components = 0.00314429 Jy ! Clean residual min=-0.001354 max=0.001582 Jy/beam ! Clean residual mean=0.000000 rms=0.000390 Jy/beam ! Combined flux in latest and established models = 0.160548 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.160548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086995Jy sigma=0.000649 ! Fit after self-cal, rms=0.086979Jy sigma=0.000649 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086979Jy sigma=0.000649 ! Fit after self-cal, rms=0.085785Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.063 mas, bmaj=1.091 mas, bpa=-76.04 degrees ! Estimated noise=213.872 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283948 Jy ! Component: 100 - total flux cleaned = 0.000601171 Jy ! Component: 150 - total flux cleaned = 0.00074572 Jy ! Component: 200 - total flux cleaned = 0.000848827 Jy ! Total flux subtracted in 200 components = 0.000848827 Jy ! Clean residual min=-0.000977 max=0.001164 Jy/beam ! Clean residual mean=-0.000007 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.161396 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 82 components and 0.161396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085769Jy sigma=0.000646 ! Fit after self-cal, rms=0.085796Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -11.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104701 Jy ! Component: 100 - total flux cleaned = 0.00135968 Jy ! Component: 150 - total flux cleaned = 0.00153894 Jy ! Component: 200 - total flux cleaned = 0.00166028 Jy ! Total flux subtracted in 200 components = 0.00166028 Jy ! Clean residual min=-0.000863 max=0.001032 Jy/beam ! Clean residual mean=-0.000005 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.163057 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 94 components and 0.163057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085778Jy sigma=0.000646 ! Fit after self-cal, rms=0.085775Jy sigma=0.000646 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-2.8, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102319 Jy ! Component: 100 - total flux cleaned = 0.00152256 Jy ! Component: 150 - total flux cleaned = 0.0018143 Jy ! Component: 200 - total flux cleaned = 0.00201168 Jy ! Total flux subtracted in 200 components = 0.00201168 Jy ! Clean residual min=-0.000864 max=0.000888 Jy/beam ! Clean residual mean=-0.000002 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.165068 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 114 components and 0.165068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085760Jy sigma=0.000645 ! Fit after self-cal, rms=0.085759Jy sigma=0.000645 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085759Jy sigma=0.000645 ! Fit after self-cal, rms=0.085119Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.057 mas, bmaj=1.085 mas, bpa=-76.15 degrees ! Estimated noise=212.064 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000481454 Jy ! Component: 100 - total flux cleaned = 0.000857632 Jy ! Component: 150 - total flux cleaned = 0.00118266 Jy ! Component: 200 - total flux cleaned = 0.00145355 Jy ! Total flux subtracted in 200 components = 0.00145355 Jy ! Clean residual min=-0.000763 max=0.000865 Jy/beam ! Clean residual mean=-0.000003 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.166522 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 0.166522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085107Jy sigma=0.000645 ! Fit after self-cal, rms=0.085109Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, -6.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000628765 Jy ! Component: 100 - total flux cleaned = 0.000899948 Jy ! Component: 150 - total flux cleaned = 0.0011589 Jy ! Component: 200 - total flux cleaned = 0.00139228 Jy ! Total flux subtracted in 200 components = 0.00139228 Jy ! Clean residual min=-0.000716 max=0.000764 Jy/beam ! Clean residual mean=-0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.167914 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 135 components and 0.167914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085098Jy sigma=0.000645 ! Fit after self-cal, rms=0.085098Jy sigma=0.000645 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085098Jy sigma=0.000645 ! Fit after self-cal, rms=0.084721Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.488 mas, bmaj=2.572 mas, bpa=-81.11 degrees ! Estimated noise=277.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945377 Jy ! Component: 100 - total flux cleaned = 0.00161443 Jy ! Component: 150 - total flux cleaned = 0.00210566 Jy ! Component: 200 - total flux cleaned = 0.00247123 Jy ! Total flux subtracted in 200 components = 0.00247123 Jy ! Clean residual min=-0.000727 max=0.000899 Jy/beam ! Clean residual mean=-0.000001 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.170385 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.170385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084718Jy sigma=0.000645 ! Fit after self-cal, rms=0.084719Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387916 Jy ! Component: 100 - total flux cleaned = 0.000671723 Jy ! Component: 150 - total flux cleaned = 0.000757209 Jy ! Component: 200 - total flux cleaned = 0.000800829 Jy ! Total flux subtracted in 200 components = 0.000800829 Jy ! Clean residual min=-0.000733 max=0.000807 Jy/beam ! Clean residual mean=0.000002 rms=0.000248 Jy/beam ! Combined flux in latest and established models = 0.171186 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 0.171186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084718Jy sigma=0.000645 ! Fit after self-cal, rms=0.084720Jy sigma=0.000645 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.053 mas, bmaj=1.084 mas, bpa=-74.97 degrees ! Estimated noise=211.158 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.053 x 1.084 at -74.97 degrees (North through East) ! Clean map min=-0.0005934 max=0.066683 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.7981 mas, bmaj=0.8466 mas, bpa=-72.27 degrees ! Estimated noise=532.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0480051 Jy ! Component: 100 - total flux cleaned = 0.0747225 Jy ! Component: 150 - total flux cleaned = 0.0920781 Jy ! Component: 200 - total flux cleaned = 0.104715 Jy ! Total flux subtracted in 200 components = 0.104715 Jy ! Clean residual min=-0.002869 max=0.007450 Jy/beam ! Clean residual mean=-0.000019 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.104715 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.104715 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.053 mas, bmaj=1.084 mas, bpa=-74.97 degrees ! Estimated noise=211.158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167262 Jy ! Component: 100 - total flux cleaned = 0.0279727 Jy ! Component: 150 - total flux cleaned = 0.0358887 Jy ! Component: 200 - total flux cleaned = 0.0415778 Jy ! Total flux subtracted in 200 components = 0.0415778 Jy ! Clean residual min=-0.001479 max=0.003351 Jy/beam ! Clean residual mean=-0.000032 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.146293 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 57 components and 0.146293 Jy ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (0.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423677 Jy ! Component: 100 - total flux cleaned = 0.00743972 Jy ! Component: 150 - total flux cleaned = 0.00993538 Jy ! Component: 200 - total flux cleaned = 0.011976 Jy ! Total flux subtracted in 200 components = 0.011976 Jy ! Clean residual min=-0.001041 max=0.001384 Jy/beam ! Clean residual mean=-0.000017 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.158269 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 92 components and 0.158269 Jy ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (7.2, -13.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172713 Jy ! Component: 100 - total flux cleaned = 0.0031788 Jy ! Component: 150 - total flux cleaned = 0.00442819 Jy ! Component: 200 - total flux cleaned = 0.00551858 Jy ! Total flux subtracted in 200 components = 0.00551858 Jy ! Clean residual min=-0.000811 max=0.000965 Jy/beam ! Clean residual mean=-0.000010 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.163787 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 117 components and 0.163787 Jy ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (4.6, -12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104375 Jy ! Component: 100 - total flux cleaned = 0.00191621 Jy ! Component: 150 - total flux cleaned = 0.00268964 Jy ! Component: 200 - total flux cleaned = 0.00332641 Jy ! Total flux subtracted in 200 components = 0.00332641 Jy ! Clean residual min=-0.000687 max=0.000763 Jy/beam ! Clean residual mean=-0.000005 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.167114 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 141 components and 0.167114 Jy ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.488 mas, bmaj=2.572 mas, bpa=-81.11 degrees ! Estimated noise=277.596 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111364 Jy ! Component: 100 - total flux cleaned = 0.00194712 Jy ! Component: 150 - total flux cleaned = 0.00259605 Jy ! Component: 200 - total flux cleaned = 0.00311499 Jy ! Total flux subtracted in 200 components = 0.00311499 Jy ! Clean residual min=-0.000739 max=0.000705 Jy/beam ! Clean residual mean=-0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.170229 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000418396 Jy ! Component: 100 - total flux cleaned = 0.00060211 Jy ! Component: 150 - total flux cleaned = 0.000751539 Jy ! Component: 200 - total flux cleaned = 0.000873583 Jy ! Total flux subtracted in 200 components = 0.000873583 Jy ! Clean residual min=-0.000712 max=0.000662 Jy/beam ! Clean residual mean=0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.171102 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 182 components and 0.171102 Jy ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=1.053 mas, bmaj=1.084 mas, bpa=-74.97 degrees ! Estimated noise=211.158 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152293 Jy ! Component: 100 - total flux cleaned = -0.000104661 Jy ! Component: 150 - total flux cleaned = -6.03255e-05 Jy ! Component: 200 - total flux cleaned = -1.98307e-05 Jy ! Total flux subtracted in 200 components = -1.98307e-05 Jy ! Clean residual min=-0.000573 max=0.000580 Jy/beam ! Clean residual mean=0.000001 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.171082 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 198 components and 0.171083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084699Jy sigma=0.000645 ! Fit after self-cal, rms=0.084676Jy sigma=0.000645 wmodel J2131+8430_X_2017_08_05_pus_map.mod ! Writing 198 model components to file: J2131+8430_X_2017_08_05_pus_map.mod wobs J2131+8430_X_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2131+8430_X_2017_08_05_pus_uvs.fits wwins J2131+8430_X_2017_08_05_pus_map.win ! wwins: Wrote 10 windows to J2131+8430_X_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.77463e-05 Jy ! Component: 100 - total flux cleaned = -6.48053e-06 Jy ! Component: 150 - total flux cleaned = 1.38138e-05 Jy ! Component: 200 - total flux cleaned = 5.23456e-05 Jy ! Component: 250 - total flux cleaned = 6.2084e-05 Jy ! Component: 300 - total flux cleaned = 0.000117753 Jy ! Component: 350 - total flux cleaned = 0.000117808 Jy ! Component: 400 - total flux cleaned = 0.000126719 Jy ! Component: 450 - total flux cleaned = 0.000109092 Jy ! Component: 500 - total flux cleaned = 0.000117653 Jy ! Component: 550 - total flux cleaned = 9.2018e-05 Jy ! Component: 600 - total flux cleaned = 6.68764e-05 Jy ! Component: 650 - total flux cleaned = 6.68108e-05 Jy ! Component: 700 - total flux cleaned = 5.05067e-05 Jy ! Component: 750 - total flux cleaned = 6.66332e-05 Jy ! Component: 800 - total flux cleaned = 7.47067e-05 Jy ! Component: 850 - total flux cleaned = 7.46265e-05 Jy ! Component: 900 - total flux cleaned = 9.00901e-05 Jy ! Component: 950 - total flux cleaned = 8.23813e-05 Jy ! Component: 1000 - total flux cleaned = 0.000112763 Jy ! Component: 1050 - total flux cleaned = 8.27918e-05 Jy ! Component: 1100 - total flux cleaned = 8.28685e-05 Jy ! Component: 1150 - total flux cleaned = 6.84151e-05 Jy ! Component: 1200 - total flux cleaned = 9.74431e-05 Jy ! Component: 1250 - total flux cleaned = 8.31148e-05 Jy ! Component: 1300 - total flux cleaned = 7.61032e-05 Jy ! Component: 1350 - total flux cleaned = 9.73167e-05 Jy ! Component: 1400 - total flux cleaned = 8.33195e-05 Jy ! Component: 1450 - total flux cleaned = 7.64662e-05 Jy ! Component: 1500 - total flux cleaned = 7.65712e-05 Jy ! Component: 1550 - total flux cleaned = 0.000103712 Jy ! Component: 1600 - total flux cleaned = 7.68818e-05 Jy ! Component: 1650 - total flux cleaned = 9.02154e-05 Jy ! Component: 1700 - total flux cleaned = 0.00010998 Jy ! Component: 1750 - total flux cleaned = 0.000109927 Jy ! Component: 1800 - total flux cleaned = 0.000135872 Jy ! Component: 1850 - total flux cleaned = 0.000103578 Jy ! Component: 1900 - total flux cleaned = 0.000129163 Jy ! Component: 1950 - total flux cleaned = 0.000129093 Jy ! Component: 2000 - total flux cleaned = 0.000129149 Jy ! Total flux subtracted in 2048 components = 0.000141626 Jy ! Clean residual min=-0.000339 max=0.000316 Jy/beam ! Clean residual mean=0.000000 rms=0.000118 Jy/beam ! Combined flux in latest and established models = 0.171224 Jy keep ! Adding 152 model components to the UV plane model. ! The established model now contains 350 components and 0.171224 Jy ![Exited script file: muppet] wmap "J2131+8430_X_2017_08_05_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.053 x 1.084 at -74.97 degrees (North through East) ! Clean map min=-0.00057392 max=0.066141 Jy/beam ! Writing clean map to FITS file: J2131+8430_X_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0661409 invert ! Inverting map ! Your choice of large map pixels excluded 0.09% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000117853 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.534555 0.534555 1.06911 2.13822 4.27644 8.55289 17.1058 34.2115 68.4231 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.053 x 1.084 at -74.97 degrees (North through East) ! Clean map min=-0.00057392 max=0.066141 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2131+8430_X_2017_08_05_pus_uvs.log closed on Thu May 9 18:59:58 2019