! Started logfile: J2129-1821_S_2017_08_12_pus_uvs.log on Fri May 10 15:08:26 2019 obs J2129-1821_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J2129-1821_S_2017_08_12_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.465778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2129-1821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 6288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1821_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 750 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.371002Jy sigma=0.002695 ! Fit after self-cal, rms=0.270285Jy sigma=0.001894 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.634 mas, bmaj=6.241 mas, bpa=-2.96 degrees ! Estimated noise=1955.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.636835 Jy ! Component: 100 - total flux cleaned = 0.823213 Jy ! Total flux subtracted in 100 components = 0.823213 Jy ! Clean residual min=-0.039212 max=0.074816 Jy/beam ! Clean residual mean=0.000262 rms=0.014640 Jy/beam ! Combined flux in latest and established models = 0.823213 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.823213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193760Jy sigma=0.001455 ! Fit after self-cal, rms=0.193492Jy sigma=0.001454 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=7.084 mas, bpa=-1.807 degrees ! Estimated noise=1410.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104762 Jy ! Component: 100 - total flux cleaned = 0.161482 Jy ! Component: 150 - total flux cleaned = 0.196095 Jy ! Component: 200 - total flux cleaned = 0.217266 Jy ! Total flux subtracted in 200 components = 0.217266 Jy ! Clean residual min=-0.023175 max=0.046704 Jy/beam ! Clean residual mean=0.000072 rms=0.007495 Jy/beam ! Combined flux in latest and established models = 1.04048 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 34 components and 1.04048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132111Jy sigma=0.000920 ! Fit after self-cal, rms=0.131735Jy sigma=0.000917 ! Inverting map ! Added new window around map position (43, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0394692 Jy ! Component: 100 - total flux cleaned = 0.0554597 Jy ! Component: 150 - total flux cleaned = 0.0601182 Jy ! Component: 200 - total flux cleaned = 0.0635335 Jy ! Total flux subtracted in 200 components = 0.0635335 Jy ! Clean residual min=-0.017228 max=0.024867 Jy/beam ! Clean residual mean=0.000064 rms=0.005208 Jy/beam ! Combined flux in latest and established models = 1.10401 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 54 components and 1.10401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119350Jy sigma=0.000832 ! Fit after self-cal, rms=0.118047Jy sigma=0.000821 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00 KP 1.04 ! LA 1.01 MK 0.99 NL 0.91 OV 1.01 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 0.99 ! LA 0.97 MK 0.97 NL 1.06 OV 1.04 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.05 KP 0.99 ! LA 0.99 MK 1.00 NL 1.01 OV 0.96 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.118047Jy sigma=0.000821 ! Fit after self-cal, rms=0.107268Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.102 mas, bmaj=7.075 mas, bpa=-1.9 degrees ! Estimated noise=1407.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, 55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211835 Jy ! Component: 100 - total flux cleaned = 0.025947 Jy ! Component: 150 - total flux cleaned = 0.0263037 Jy ! Component: 200 - total flux cleaned = 0.0265541 Jy ! Total flux subtracted in 200 components = 0.0265541 Jy ! Clean residual min=-0.016315 max=0.016010 Jy/beam ! Clean residual mean=0.000006 rms=0.003561 Jy/beam ! Combined flux in latest and established models = 1.13057 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 1.13057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102824Jy sigma=0.000713 ! Fit after self-cal, rms=0.102722Jy sigma=0.000712 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102722Jy sigma=0.000712 ! Fit after self-cal, rms=0.099515Jy sigma=0.000692 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.097 mas, bmaj=7.08 mas, bpa=-2.064 degrees ! Estimated noise=1403.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728092 Jy ! Component: 100 - total flux cleaned = 0.00913054 Jy ! Component: 150 - total flux cleaned = 0.00971178 Jy ! Component: 200 - total flux cleaned = 0.0100632 Jy ! Total flux subtracted in 200 components = 0.0100632 Jy ! Clean residual min=-0.010381 max=0.010643 Jy/beam ! Clean residual mean=0.000003 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 1.14063 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 1.14063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098490Jy sigma=0.000684 ! Fit after self-cal, rms=0.098478Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101427 Jy ! Component: 100 - total flux cleaned = 0.0138949 Jy ! Component: 150 - total flux cleaned = 0.0147819 Jy ! Component: 200 - total flux cleaned = 0.015874 Jy ! Total flux subtracted in 200 components = 0.015874 Jy ! Clean residual min=-0.009452 max=0.007524 Jy/beam ! Clean residual mean=-0.000010 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 1.1565 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 1.1565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097209Jy sigma=0.000675 ! Fit after self-cal, rms=0.097123Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097123Jy sigma=0.000674 ! Fit after self-cal, rms=0.096837Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.098 mas, bmaj=7.085 mas, bpa=-2.123 degrees ! Estimated noise=1400.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540284 Jy ! Component: 100 - total flux cleaned = 0.00707309 Jy ! Component: 150 - total flux cleaned = 0.00796579 Jy ! Component: 200 - total flux cleaned = 0.00819751 Jy ! Total flux subtracted in 200 components = 0.00819751 Jy ! Clean residual min=-0.007827 max=0.006395 Jy/beam ! Clean residual mean=-0.000003 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 1.1647 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 132 components and 1.1647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096371Jy sigma=0.000670 ! Fit after self-cal, rms=0.096342Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175514 Jy ! Component: 100 - total flux cleaned = 0.00207531 Jy ! Component: 150 - total flux cleaned = 0.00227548 Jy ! Component: 200 - total flux cleaned = 0.00237397 Jy ! Total flux subtracted in 200 components = 0.00237397 Jy ! Clean residual min=-0.007591 max=0.005936 Jy/beam ! Clean residual mean=-0.000003 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 1.16708 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 138 components and 1.16708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096125Jy sigma=0.000668 ! Fit after self-cal, rms=0.096119Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096119Jy sigma=0.000668 ! Fit after self-cal, rms=0.096016Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.655 mas, bmaj=14.91 mas, bpa=-2.524 degrees ! Estimated noise=1832.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145967 Jy ! Component: 100 - total flux cleaned = 0.00262348 Jy ! Component: 150 - total flux cleaned = 0.0030403 Jy ! Component: 200 - total flux cleaned = 0.00331886 Jy ! Total flux subtracted in 200 components = 0.00331886 Jy ! Clean residual min=-0.006486 max=0.006421 Jy/beam ! Clean residual mean=0.000002 rms=0.001861 Jy/beam ! Combined flux in latest and established models = 1.17039 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 146 components and 1.17039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095943Jy sigma=0.000667 ! Fit after self-cal, rms=0.095879Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.95954e-06 Jy ! Component: 100 - total flux cleaned = 0.000387927 Jy ! Component: 150 - total flux cleaned = 0.000585567 Jy ! Component: 200 - total flux cleaned = 0.000525633 Jy ! Total flux subtracted in 200 components = 0.000525633 Jy ! Clean residual min=-0.006448 max=0.005963 Jy/beam ! Clean residual mean=0.000002 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 1.17092 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 152 components and 1.17092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095867Jy sigma=0.000666 ! Fit after self-cal, rms=0.095802Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.087 mas, bpa=-2.14 degrees ! Estimated noise=1399.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.099 x 7.087 at -2.14 degrees (North through East) ! Clean map min=-0.010046 max=0.80624 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095802Jy sigma=0.000666 ! Fit after self-cal, rms=0.086719Jy sigma=0.000597 ! Inverting map and beam ! Estimated beam: bmin=3.099 mas, bmaj=7.087 mas, bpa=-2.169 degrees ! Estimated noise=1398.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102309 Jy ! Component: 100 - total flux cleaned = 0.00102589 Jy ! Component: 150 - total flux cleaned = 0.00102682 Jy ! Component: 200 - total flux cleaned = 0.000943279 Jy ! Total flux subtracted in 200 components = 0.000943279 Jy ! Clean residual min=-0.005825 max=0.005214 Jy/beam ! Clean residual mean=-0.000001 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 1.17186 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 163 components and 1.17186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086524Jy sigma=0.000595 ! Fit after self-cal, rms=0.086521Jy sigma=0.000595 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.71991e-05 Jy ! Component: 100 - total flux cleaned = 0.000174127 Jy ! Component: 150 - total flux cleaned = 0.0001721 Jy ! Component: 200 - total flux cleaned = 0.000240366 Jy ! Total flux subtracted in 200 components = 0.000240366 Jy ! Clean residual min=-0.005646 max=0.005078 Jy/beam ! Clean residual mean=-0.000001 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 1.1721 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 174 components and 1.1721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086403Jy sigma=0.000594 ! Fit after self-cal, rms=0.086402Jy sigma=0.000594 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086402Jy sigma=0.000594 ! Fit after self-cal, rms=0.086387Jy sigma=0.000594 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.24 mas, bpa=-3.154 degrees ! Estimated noise=1928.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.628524 Jy ! Component: 100 - total flux cleaned = 0.815159 Jy ! Component: 150 - total flux cleaned = 0.896432 Jy ! Component: 200 - total flux cleaned = 0.947462 Jy ! Total flux subtracted in 200 components = 0.947462 Jy ! Clean residual min=-0.019601 max=0.041512 Jy/beam ! Clean residual mean=0.000122 rms=0.007245 Jy/beam ! Combined flux in latest and established models = 0.947462 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.947462 Jy ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.088 mas, bpa=-2.174 degrees ! Estimated noise=1398.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0598696 Jy ! Component: 100 - total flux cleaned = 0.0962028 Jy ! Component: 150 - total flux cleaned = 0.121243 Jy ! Component: 200 - total flux cleaned = 0.139544 Jy ! Total flux subtracted in 200 components = 0.139544 Jy ! Clean residual min=-0.010879 max=0.012685 Jy/beam ! Clean residual mean=0.000047 rms=0.003364 Jy/beam ! Combined flux in latest and established models = 1.08701 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 94 components and 1.08701 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.653 mas, bmaj=14.91 mas, bpa=-2.549 degrees ! Estimated noise=1830.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0245755 Jy ! Component: 100 - total flux cleaned = 0.0382894 Jy ! Component: 150 - total flux cleaned = 0.0473408 Jy ! Component: 200 - total flux cleaned = 0.0539156 Jy ! Total flux subtracted in 200 components = 0.0539156 Jy ! Clean residual min=-0.005811 max=0.007988 Jy/beam ! Clean residual mean=0.000021 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 1.14092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482532 Jy ! Component: 100 - total flux cleaned = 0.00843123 Jy ! Component: 150 - total flux cleaned = 0.0111493 Jy ! Component: 200 - total flux cleaned = 0.0122236 Jy ! Total flux subtracted in 200 components = 0.0122236 Jy ! Clean residual min=-0.005722 max=0.006684 Jy/beam ! Clean residual mean=0.000008 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 1.15315 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 161 components and 1.15315 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=7.088 mas, bpa=-2.174 degrees ! Estimated noise=1398.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566461 Jy ! Component: 100 - total flux cleaned = 0.000139118 Jy ! Component: 150 - total flux cleaned = -4.12619e-05 Jy ! Component: 200 - total flux cleaned = -4.84608e-05 Jy ! Total flux subtracted in 200 components = -4.84608e-05 Jy ! Clean residual min=-0.007136 max=0.006525 Jy/beam ! Clean residual mean=0.000004 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 1.1531 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 185 components and 1.1531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086971Jy sigma=0.000598 ! Fit after self-cal, rms=0.086783Jy sigma=0.000597 wmodel J2129-1821_S_2017_08_12_pus_map.mod ! Writing 185 model components to file: J2129-1821_S_2017_08_12_pus_map.mod wobs J2129-1821_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J2129-1821_S_2017_08_12_pus_uvs.fits wwins J2129-1821_S_2017_08_12_pus_map.win ! wwins: Wrote 5 windows to J2129-1821_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000863991 Jy ! Component: 100 - total flux cleaned = -0.00135808 Jy ! Component: 150 - total flux cleaned = -0.00164439 Jy ! Component: 200 - total flux cleaned = -0.00216603 Jy ! Component: 250 - total flux cleaned = -0.00232531 Jy ! Component: 300 - total flux cleaned = -0.00239788 Jy ! Component: 350 - total flux cleaned = -0.00239805 Jy ! Component: 400 - total flux cleaned = -0.00267455 Jy ! Component: 450 - total flux cleaned = -0.00274345 Jy ! Component: 500 - total flux cleaned = -0.00306323 Jy ! Component: 550 - total flux cleaned = -0.00324589 Jy ! Component: 600 - total flux cleaned = -0.00336199 Jy ! Component: 650 - total flux cleaned = -0.0034725 Jy ! Component: 700 - total flux cleaned = -0.00352614 Jy ! Component: 750 - total flux cleaned = -0.0036833 Jy ! Component: 800 - total flux cleaned = -0.00383371 Jy ! Component: 850 - total flux cleaned = -0.00407766 Jy ! Component: 900 - total flux cleaned = -0.00412432 Jy ! Component: 950 - total flux cleaned = -0.00421585 Jy ! Component: 1000 - total flux cleaned = -0.00430475 Jy ! Component: 1050 - total flux cleaned = -0.00447703 Jy ! Component: 1100 - total flux cleaned = -0.00472706 Jy ! Component: 1150 - total flux cleaned = -0.00492939 Jy ! Component: 1200 - total flux cleaned = -0.00496867 Jy ! Component: 1250 - total flux cleaned = -0.00500778 Jy ! Component: 1300 - total flux cleaned = -0.00504504 Jy ! Component: 1350 - total flux cleaned = -0.00508084 Jy ! Component: 1400 - total flux cleaned = -0.00511627 Jy ! Component: 1450 - total flux cleaned = -0.00518683 Jy ! Component: 1500 - total flux cleaned = -0.00522142 Jy ! Component: 1550 - total flux cleaned = -0.00528828 Jy ! Component: 1600 - total flux cleaned = -0.00532061 Jy ! Component: 1650 - total flux cleaned = -0.00538411 Jy ! Component: 1700 - total flux cleaned = -0.00535242 Jy ! Component: 1750 - total flux cleaned = -0.00532173 Jy ! Component: 1800 - total flux cleaned = -0.00520233 Jy ! Component: 1850 - total flux cleaned = -0.00514444 Jy ! Component: 1900 - total flux cleaned = -0.00514442 Jy ! Component: 1950 - total flux cleaned = -0.0050027 Jy ! Component: 2000 - total flux cleaned = -0.00503112 Jy ! Component: 2050 - total flux cleaned = -0.00492148 Jy ! Component: 2100 - total flux cleaned = -0.00481354 Jy ! Component: 2150 - total flux cleaned = -0.0047873 Jy ! Component: 2200 - total flux cleaned = -0.00468241 Jy ! Component: 2250 - total flux cleaned = -0.00457911 Jy ! Component: 2300 - total flux cleaned = -0.00450282 Jy ! Component: 2350 - total flux cleaned = -0.00437715 Jy ! Component: 2400 - total flux cleaned = -0.00430328 Jy ! Component: 2450 - total flux cleaned = -0.0042298 Jy ! Component: 2500 - total flux cleaned = -0.00406174 Jy ! Component: 2550 - total flux cleaned = -0.00399061 Jy ! Component: 2600 - total flux cleaned = -0.00392037 Jy ! Component: 2650 - total flux cleaned = -0.00380505 Jy ! Component: 2700 - total flux cleaned = -0.00362293 Jy ! Component: 2750 - total flux cleaned = -0.00348829 Jy ! Component: 2800 - total flux cleaned = -0.00339902 Jy ! Component: 2850 - total flux cleaned = -0.00326657 Jy ! Component: 2900 - total flux cleaned = -0.00311381 Jy ! Component: 2950 - total flux cleaned = -0.00294079 Jy ! Component: 3000 - total flux cleaned = -0.00285518 Jy ! Component: 3050 - total flux cleaned = -0.00270655 Jy ! Component: 3100 - total flux cleaned = -0.00264347 Jy ! Component: 3150 - total flux cleaned = -0.00258088 Jy ! Component: 3200 - total flux cleaned = -0.00237399 Jy ! Component: 3250 - total flux cleaned = -0.00231243 Jy ! Component: 3300 - total flux cleaned = -0.00223118 Jy ! Component: 3350 - total flux cleaned = -0.00208973 Jy ! Component: 3400 - total flux cleaned = -0.00206978 Jy ! Component: 3450 - total flux cleaned = -0.00201002 Jy ! Component: 3500 - total flux cleaned = -0.00191071 Jy ! Component: 3550 - total flux cleaned = -0.00189112 Jy ! Component: 3600 - total flux cleaned = -0.00175402 Jy ! Component: 3650 - total flux cleaned = -0.00171513 Jy ! Component: 3700 - total flux cleaned = -0.00165703 Jy ! Component: 3750 - total flux cleaned = -0.00159933 Jy ! Component: 3800 - total flux cleaned = -0.00152275 Jy ! Component: 3850 - total flux cleaned = -0.00142746 Jy ! Component: 3900 - total flux cleaned = -0.00137053 Jy ! Component: 3950 - total flux cleaned = -0.00129491 Jy ! Component: 4000 - total flux cleaned = -0.00118189 Jy ! Component: 4050 - total flux cleaned = -0.00116308 Jy ! Total flux subtracted in 4096 components = -0.00108804 Jy ! Clean residual min=-0.001045 max=0.001395 Jy/beam ! Clean residual mean=-0.000000 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 1.15201 Jy keep ! Adding 233 model components to the UV plane model. ! The established model now contains 418 components and 1.15201 Jy ![Exited script file: muppet] wmap "J2129-1821_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.1 x 7.088 at -2.174 degrees (North through East) ! Clean map min=-0.0029926 max=0.80581 Jy/beam ! Writing clean map to FITS file: J2129-1821_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.805808 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00028325 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.105453 0.105453 0.210907 0.421813 0.843626 1.68725 3.37451 6.74901 13.498 26.996 53.9921 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.805 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.1 x 7.088 at -2.174 degrees (North through East) ! Clean map min=-0.0029926 max=0.80581 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1821_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:08:30 2019