! Started logfile: J2129-1538_X_2017_03_23_pus_uvs.log on Mon May 13 10:28:08 2019 obs J2129-1538_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J2129-1538_X_2017_03_23_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.678704 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 8796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J2129-1538_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.434318Jy sigma=0.003235 ! Fit after self-cal, rms=0.380097Jy sigma=0.002842 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.6886 mas, bmaj=1.857 mas, bpa=-0.1114 degrees ! Estimated noise=1531.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.868619 Jy ! Component: 100 - total flux cleaned = 1.16125 Jy ! Total flux subtracted in 100 components = 1.16125 Jy ! Clean residual min=-0.032124 max=0.124087 Jy/beam ! Clean residual mean=-0.000039 rms=0.012328 Jy/beam ! Combined flux in latest and established models = 1.16125 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.16125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.240134Jy sigma=0.001802 ! Fit after self-cal, rms=0.240017Jy sigma=0.001801 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133678 Jy ! Component: 100 - total flux cleaned = 0.204454 Jy ! Total flux subtracted in 100 components = 0.204454 Jy ! Clean residual min=-0.016097 max=0.034633 Jy/beam ! Clean residual mean=-0.000078 rms=0.004624 Jy/beam ! Combined flux in latest and established models = 1.3657 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 1.3657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133290Jy sigma=0.000895 ! Fit after self-cal, rms=0.133220Jy sigma=0.000894 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040212 Jy ! Component: 100 - total flux cleaned = 0.0632756 Jy ! Total flux subtracted in 100 components = 0.0632756 Jy ! Clean residual min=-0.012686 max=0.013141 Jy/beam ! Clean residual mean=-0.000090 rms=0.003056 Jy/beam ! Combined flux in latest and established models = 1.42898 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 1.42898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119377Jy sigma=0.000764 ! Fit after self-cal, rms=0.119372Jy sigma=0.000764 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8764 mas, bmaj=2.21 mas, bpa=1.461 degrees ! Estimated noise=1062.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143938 Jy ! Component: 100 - total flux cleaned = 0.019581 Jy ! Component: 150 - total flux cleaned = 0.0197772 Jy ! Component: 200 - total flux cleaned = 0.0196352 Jy ! Total flux subtracted in 200 components = 0.0196352 Jy ! Clean residual min=-0.015571 max=0.011274 Jy/beam ! Clean residual mean=-0.000144 rms=0.003123 Jy/beam ! Combined flux in latest and established models = 1.44861 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 25 components and 1.44861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117873Jy sigma=0.000749 ! Fit after self-cal, rms=0.117875Jy sigma=0.000749 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.03 KP 0.99 ! LA 0.98 MK 0.96 NL 0.96 OV 1.00 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.04 KP 0.98 ! LA 0.99 MK 0.96 NL 0.96 OV 0.99 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.99 KP 0.99 ! LA 1.01 MK 0.98 NL 0.97 OV 0.99 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.02 KP 0.99 ! LA 1.01 MK 1.00 NL 0.96 OV 1.04 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 0.95 KP 0.99 ! LA 1.01 MK 1.01 NL 0.96 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 0.98 ! LA 1.00 MK 1.00 NL 0.96 OV 0.99 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.02 KP 0.99 ! LA 1.02 MK 1.01 NL 0.96 OV 0.99 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.01 KP 0.98 ! LA 1.00 MK 1.01 NL 0.96 OV 1.00 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.02 KP 0.98 ! LA 1.01 MK 1.00 NL 0.97 OV 1.00 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.04 KP 1.00 ! LA 1.04 MK 1.02 NL 0.96 OV 1.00 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 1.04 KP 0.97 ! LA 1.02 MK 1.01 NL 0.97 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.01 KP 1.02 ! LA 1.01 MK 0.98 NL 0.98 OV 1.01 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.117875Jy sigma=0.000749 ! Fit after self-cal, rms=0.111573Jy sigma=0.000695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8762 mas, bmaj=2.207 mas, bpa=1.358 degrees ! Estimated noise=1059.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140857 Jy ! Component: 100 - total flux cleaned = -0.00150673 Jy ! Component: 150 - total flux cleaned = -0.00159986 Jy ! Component: 200 - total flux cleaned = -0.0016834 Jy ! Total flux subtracted in 200 components = -0.0016834 Jy ! Clean residual min=-0.009522 max=0.007870 Jy/beam ! Clean residual mean=-0.000121 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 1.44693 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 1.44693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111341Jy sigma=0.000693 ! Fit after self-cal, rms=0.111341Jy sigma=0.000693 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111341Jy sigma=0.000693 ! Fit after self-cal, rms=0.108114Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8767 mas, bmaj=2.208 mas, bpa=1.277 degrees ! Estimated noise=1059.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000402906 Jy ! Component: 100 - total flux cleaned = 0.000327729 Jy ! Component: 150 - total flux cleaned = 0.000254469 Jy ! Component: 200 - total flux cleaned = 0.000256225 Jy ! Total flux subtracted in 200 components = 0.000256225 Jy ! Clean residual min=-0.005039 max=0.005891 Jy/beam ! Clean residual mean=-0.000057 rms=0.001298 Jy/beam ! Combined flux in latest and established models = 1.44719 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 1.44719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107996Jy sigma=0.000660 ! Fit after self-cal, rms=0.108005Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.8, 25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323333 Jy ! Component: 100 - total flux cleaned = 0.0031 Jy ! Component: 150 - total flux cleaned = 0.00277593 Jy ! Component: 200 - total flux cleaned = 0.00249766 Jy ! Total flux subtracted in 200 components = 0.00249766 Jy ! Clean residual min=-0.005228 max=0.006191 Jy/beam ! Clean residual mean=-0.000055 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 1.44968 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 1.44968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107581Jy sigma=0.000658 ! Fit after self-cal, rms=0.107576Jy sigma=0.000658 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Added new window around map position (2.6, -24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301578 Jy ! Component: 100 - total flux cleaned = 0.00378202 Jy ! Component: 150 - total flux cleaned = 0.00389034 Jy ! Component: 200 - total flux cleaned = 0.00388783 Jy ! Total flux subtracted in 200 components = 0.00388783 Jy ! Clean residual min=-0.004667 max=0.004184 Jy/beam ! Clean residual mean=-0.000057 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 1.45357 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 1.45357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107215Jy sigma=0.000656 ! Fit after self-cal, rms=0.107198Jy sigma=0.000655 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107198Jy sigma=0.000655 ! Fit after self-cal, rms=0.106120Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8769 mas, bmaj=2.208 mas, bpa=1.28 degrees ! Estimated noise=1060.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00274579 Jy ! Component: 100 - total flux cleaned = -0.00362922 Jy ! Component: 150 - total flux cleaned = -0.00389477 Jy ! Component: 200 - total flux cleaned = -0.00413641 Jy ! Total flux subtracted in 200 components = -0.00413641 Jy ! Clean residual min=-0.002631 max=0.003007 Jy/beam ! Clean residual mean=-0.000006 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 1.44944 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 1.44944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106002Jy sigma=0.000643 ! Fit after self-cal, rms=0.106007Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.2, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213287 Jy ! Component: 100 - total flux cleaned = 0.00226411 Jy ! Component: 150 - total flux cleaned = 0.00243783 Jy ! Component: 200 - total flux cleaned = 0.00233421 Jy ! Total flux subtracted in 200 components = 0.00233421 Jy ! Clean residual min=-0.002640 max=0.003124 Jy/beam ! Clean residual mean=-0.000001 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 1.45177 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 1.45177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105898Jy sigma=0.000642 ! Fit after self-cal, rms=0.105895Jy sigma=0.000642 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Added new window around map position (13.6, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126728 Jy ! Component: 100 - total flux cleaned = 0.000859925 Jy ! Component: 150 - total flux cleaned = 0.000801183 Jy ! Component: 200 - total flux cleaned = 0.000852227 Jy ! Total flux subtracted in 200 components = 0.000852227 Jy ! Clean residual min=-0.002574 max=0.002658 Jy/beam ! Clean residual mean=-0.000002 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 1.45262 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 1.45262 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105787Jy sigma=0.000641 ! Fit after self-cal, rms=0.105781Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105781Jy sigma=0.000641 ! Fit after self-cal, rms=0.105803Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=2.19 mas, bmaj=4.483 mas, bpa=0.186 degrees ! Estimated noise=1295.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000643155 Jy ! Component: 100 - total flux cleaned = -0.00103188 Jy ! Component: 150 - total flux cleaned = -0.00138089 Jy ! Component: 200 - total flux cleaned = -0.00169425 Jy ! Total flux subtracted in 200 components = -0.00169425 Jy ! Clean residual min=-0.001957 max=0.002245 Jy/beam ! Clean residual mean=-0.000003 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 1.45093 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 108 components and 1.45093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105782Jy sigma=0.000641 ! Fit after self-cal, rms=0.105776Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.96403e-05 Jy ! Component: 100 - total flux cleaned = -0.000418185 Jy ! Component: 150 - total flux cleaned = -0.000734848 Jy ! Component: 200 - total flux cleaned = -0.00102471 Jy ! Total flux subtracted in 200 components = -0.00102471 Jy ! Clean residual min=-0.001968 max=0.002208 Jy/beam ! Clean residual mean=-0.000003 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 1.4499 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 112 components and 1.4499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105764Jy sigma=0.000641 ! Fit after self-cal, rms=0.105759Jy sigma=0.000641 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.877 mas, bmaj=2.209 mas, bpa=1.277 degrees ! Estimated noise=1060.29 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.877 x 2.209 at 1.277 degrees (North through East) ! Clean map min=-0.0042561 max=1.1722 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105759Jy sigma=0.000641 ! Fit after self-cal, rms=0.099889Jy sigma=0.000594 ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8769 mas, bmaj=2.209 mas, bpa=1.253 degrees ! Estimated noise=1060.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158134 Jy ! Component: 100 - total flux cleaned = -0.000346852 Jy ! Component: 150 - total flux cleaned = -0.000344981 Jy ! Component: 200 - total flux cleaned = -0.000430446 Jy ! Total flux subtracted in 200 components = -0.000430446 Jy ! Clean residual min=-0.002435 max=0.002536 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 1.44947 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 125 components and 1.44947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099839Jy sigma=0.000594 ! Fit after self-cal, rms=0.099837Jy sigma=0.000594 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.93585e-05 Jy ! Component: 100 - total flux cleaned = -9.50262e-07 Jy ! Component: 150 - total flux cleaned = 7.82868e-05 Jy ! Component: 200 - total flux cleaned = 7.77387e-05 Jy ! Total flux subtracted in 200 components = 7.77387e-05 Jy ! Clean residual min=-0.002398 max=0.002526 Jy/beam ! Clean residual mean=-0.000002 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.44955 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 130 components and 1.44955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099801Jy sigma=0.000594 ! Fit after self-cal, rms=0.099800Jy sigma=0.000594 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099800Jy sigma=0.000594 ! Fit after self-cal, rms=0.099807Jy sigma=0.000594 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.6891 mas, bmaj=1.857 mas, bpa=-0.3151 degrees ! Estimated noise=1528.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.867634 Jy ! Component: 100 - total flux cleaned = 1.16148 Jy ! Component: 150 - total flux cleaned = 1.29478 Jy ! Component: 200 - total flux cleaned = 1.36461 Jy ! Total flux subtracted in 200 components = 1.36461 Jy ! Clean residual min=-0.012584 max=0.033903 Jy/beam ! Clean residual mean=0.000002 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 1.36461 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.36461 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8768 mas, bmaj=2.209 mas, bpa=1.243 degrees ! Estimated noise=1060.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047933 Jy ! Component: 100 - total flux cleaned = 0.0694192 Jy ! Component: 150 - total flux cleaned = 0.0793841 Jy ! Component: 200 - total flux cleaned = 0.0847905 Jy ! Total flux subtracted in 200 components = 0.0847905 Jy ! Clean residual min=-0.003802 max=0.004824 Jy/beam ! Clean residual mean=-0.000010 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 1.4494 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 1.4494 Jy ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Added new window around map position (-0.6, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290165 Jy ! Component: 100 - total flux cleaned = 0.00378774 Jy ! Component: 150 - total flux cleaned = 0.00431048 Jy ! Component: 200 - total flux cleaned = 0.00490346 Jy ! Total flux subtracted in 200 components = 0.00490346 Jy ! Clean residual min=-0.003586 max=0.003021 Jy/beam ! Clean residual mean=-0.000005 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 1.45431 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 1.45431 Jy ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=2.189 mas, bmaj=4.484 mas, bpa=0.163 degrees ! Estimated noise=1295.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00224335 Jy ! Component: 100 - total flux cleaned = -0.00251477 Jy ! Component: 150 - total flux cleaned = -0.00250884 Jy ! Component: 200 - total flux cleaned = -0.0025094 Jy ! Total flux subtracted in 200 components = -0.0025094 Jy ! Clean residual min=-0.002120 max=0.002164 Jy/beam ! Clean residual mean=-0.000009 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 1.4518 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143305 Jy ! Component: 100 - total flux cleaned = -0.000278564 Jy ! Component: 150 - total flux cleaned = -0.00036442 Jy ! Component: 200 - total flux cleaned = -0.000406213 Jy ! Total flux subtracted in 200 components = -0.000406213 Jy ! Clean residual min=-0.002111 max=0.002120 Jy/beam ! Clean residual mean=-0.000008 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 1.45139 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 80 components and 1.45139 Jy ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8768 mas, bmaj=2.209 mas, bpa=1.243 degrees ! Estimated noise=1060.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299449 Jy ! Component: 100 - total flux cleaned = 0.000769708 Jy ! Component: 150 - total flux cleaned = 0.000942712 Jy ! Component: 200 - total flux cleaned = 0.00102283 Jy ! Total flux subtracted in 200 components = 0.00102283 Jy ! Clean residual min=-0.002898 max=0.002719 Jy/beam ! Clean residual mean=-0.000004 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 1.45241 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 1.45241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100262Jy sigma=0.000596 ! Fit after self-cal, rms=0.100243Jy sigma=0.000596 wmodel J2129-1538_X_2017_03_23_pus_map.mod ! Writing 89 model components to file: J2129-1538_X_2017_03_23_pus_map.mod wobs J2129-1538_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J2129-1538_X_2017_03_23_pus_uvs.fits wwins J2129-1538_X_2017_03_23_pus_map.win ! wwins: Wrote 6 windows to J2129-1538_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000666812 Jy ! Component: 100 - total flux cleaned = -0.000716659 Jy ! Component: 150 - total flux cleaned = -0.000629698 Jy ! Component: 200 - total flux cleaned = -0.000419163 Jy ! Component: 250 - total flux cleaned = -0.000296081 Jy ! Component: 300 - total flux cleaned = -0.000137042 Jy ! Component: 350 - total flux cleaned = -5.97979e-05 Jy ! Component: 400 - total flux cleaned = 9.20434e-05 Jy ! Component: 450 - total flux cleaned = 0.000129964 Jy ! Component: 500 - total flux cleaned = 0.000202362 Jy ! Component: 550 - total flux cleaned = 0.000273531 Jy ! Component: 600 - total flux cleaned = 0.000413425 Jy ! Component: 650 - total flux cleaned = 0.000413178 Jy ! Component: 700 - total flux cleaned = 0.000480615 Jy ! Component: 750 - total flux cleaned = 0.000580218 Jy ! Component: 800 - total flux cleaned = 0.000711092 Jy ! Component: 850 - total flux cleaned = 0.000840612 Jy ! Component: 900 - total flux cleaned = 0.00100047 Jy ! Component: 950 - total flux cleaned = 0.00118914 Jy ! Component: 1000 - total flux cleaned = 0.00137526 Jy ! Component: 1050 - total flux cleaned = 0.00155841 Jy ! Component: 1100 - total flux cleaned = 0.00177009 Jy ! Component: 1150 - total flux cleaned = 0.00188969 Jy ! Component: 1200 - total flux cleaned = 0.00197854 Jy ! Component: 1250 - total flux cleaned = 0.00215503 Jy ! Component: 1300 - total flux cleaned = 0.00247362 Jy ! Component: 1350 - total flux cleaned = 0.00261697 Jy ! Component: 1400 - total flux cleaned = 0.00287216 Jy ! Component: 1450 - total flux cleaned = 0.00306839 Jy ! Component: 1500 - total flux cleaned = 0.00323529 Jy ! Component: 1550 - total flux cleaned = 0.00348281 Jy ! Component: 1600 - total flux cleaned = 0.00359168 Jy ! Component: 1650 - total flux cleaned = 0.00375369 Jy ! Component: 1700 - total flux cleaned = 0.0039408 Jy ! Component: 1750 - total flux cleaned = 0.00415234 Jy ! Component: 1800 - total flux cleaned = 0.004283 Jy ! Component: 1850 - total flux cleaned = 0.004361 Jy ! Component: 1900 - total flux cleaned = 0.00451547 Jy ! Component: 1950 - total flux cleaned = 0.004745 Jy ! Component: 2000 - total flux cleaned = 0.00479527 Jy ! Total flux subtracted in 2048 components = 0.00484576 Jy ! Clean residual min=-0.001576 max=0.001458 Jy/beam ! Clean residual mean=-0.000004 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 1.45726 Jy keep ! Adding 112 model components to the UV plane model. ! The established model now contains 197 components and 1.45726 Jy ![Exited script file: muppet] wmap "J2129-1538_X_2017_03_23_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8768 x 2.209 at 1.243 degrees (North through East) ! Clean map min=-0.0033242 max=1.1694 Jy/beam ! Writing clean map to FITS file: J2129-1538_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.16937 invert ! Inverting map ! Your choice of large map pixels excluded 0.159% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000451336 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.11579 0.11579 0.23158 0.46316 0.926319 1.85264 3.70528 7.41055 14.8211 29.6422 59.2844 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.169 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8768 x 2.209 at 1.243 degrees (North through East) ! Clean map min=-0.0033242 max=1.1694 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:28:10 2019