! Started logfile: J2129-1538_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:53 2019 obs J2129-1538_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_10_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.519231 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 972 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.375631Jy sigma=0.003429 ! Fit after self-cal, rms=0.327822Jy sigma=0.002976 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.454 mas, bmaj=19.85 mas, bpa=-22.54 degrees ! Estimated noise=3373.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.527741 Jy ! Component: 100 - total flux cleaned = 0.660297 Jy ! Total flux subtracted in 100 components = 0.660297 Jy ! Clean residual min=-0.040752 max=0.055730 Jy/beam ! Clean residual mean=0.000137 rms=0.011874 Jy/beam ! Combined flux in latest and established models = 0.660297 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.660297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154796Jy sigma=0.001176 ! Fit after self-cal, rms=0.154814Jy sigma=0.001176 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=20.47 mas, bpa=-21.96 degrees ! Estimated noise=2818.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660149 Jy ! Component: 100 - total flux cleaned = 0.094287 Jy ! Component: 150 - total flux cleaned = 0.11114 Jy ! Component: 200 - total flux cleaned = 0.11607 Jy ! Total flux subtracted in 200 components = 0.11607 Jy ! Clean residual min=-0.026176 max=0.023369 Jy/beam ! Clean residual mean=-0.000104 rms=0.006879 Jy/beam ! Combined flux in latest and established models = 0.776367 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 54 components and 0.776367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119826Jy sigma=0.000933 ! Fit after self-cal, rms=0.119818Jy sigma=0.000933 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.99 KP 1.09 ! LA 1.02 MK 0.99 NL 0.89 OV 0.98 ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.02 KP 1.03 ! LA 0.97 MK 0.98 NL 1.02 OV 1.01 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.01 KP 1.03 ! LA 0.76 MK 1.01 NL 1.16 OV 0.92 ! PT 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.91 KP 1.00* ! LA 0.90 MK 1.25 NL 1.00* OV 1.00* ! PT 1.00* ! ! ! Fit before self-cal, rms=0.119818Jy sigma=0.000933 ! Fit after self-cal, rms=0.080901Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=20.15 mas, bpa=-21.92 degrees ! Estimated noise=2835.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00613947 Jy ! Component: 100 - total flux cleaned = -0.00786182 Jy ! Component: 150 - total flux cleaned = -0.00802054 Jy ! Component: 200 - total flux cleaned = -0.00815434 Jy ! Total flux subtracted in 200 components = -0.00815434 Jy ! Clean residual min=-0.007294 max=0.008260 Jy/beam ! Clean residual mean=-0.000022 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.768212 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.768213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080111Jy sigma=0.000660 ! Fit after self-cal, rms=0.079994Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079994Jy sigma=0.000660 ! Fit after self-cal, rms=0.079832Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=20.14 mas, bpa=-21.91 degrees ! Estimated noise=2832.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00296396 Jy ! Component: 100 - total flux cleaned = -0.00369137 Jy ! Component: 150 - total flux cleaned = -0.00380161 Jy ! Component: 200 - total flux cleaned = -0.00389139 Jy ! Total flux subtracted in 200 components = -0.00389139 Jy ! Clean residual min=-0.007012 max=0.007724 Jy/beam ! Clean residual mean=-0.000017 rms=0.001872 Jy/beam ! Combined flux in latest and established models = 0.764321 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.764321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079518Jy sigma=0.000657 ! Fit after self-cal, rms=0.079515Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000269861 Jy ! Component: 100 - total flux cleaned = 0.000196697 Jy ! Component: 150 - total flux cleaned = 0.000130331 Jy ! Component: 200 - total flux cleaned = 9.99034e-06 Jy ! Total flux subtracted in 200 components = 9.99034e-06 Jy ! Clean residual min=-0.006953 max=0.007452 Jy/beam ! Clean residual mean=-0.000017 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.764331 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 110 components and 0.764331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079394Jy sigma=0.000656 ! Fit after self-cal, rms=0.079393Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079393Jy sigma=0.000656 ! Fit after self-cal, rms=0.079192Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=20.12 mas, bpa=-21.9 degrees ! Estimated noise=2828.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00162446 Jy ! Component: 100 - total flux cleaned = -0.00149485 Jy ! Component: 150 - total flux cleaned = -0.00132597 Jy ! Component: 200 - total flux cleaned = -0.00132848 Jy ! Total flux subtracted in 200 components = -0.00132848 Jy ! Clean residual min=-0.006640 max=0.007245 Jy/beam ! Clean residual mean=-0.000011 rms=0.001692 Jy/beam ! Combined flux in latest and established models = 0.763003 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 123 components and 0.763003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079078Jy sigma=0.000654 ! Fit after self-cal, rms=0.079072Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (55.5, 45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466567 Jy ! Component: 100 - total flux cleaned = 0.0058587 Jy ! Component: 150 - total flux cleaned = 0.00678582 Jy ! Component: 200 - total flux cleaned = 0.00856548 Jy ! Total flux subtracted in 200 components = 0.00856548 Jy ! Clean residual min=-0.006132 max=0.004625 Jy/beam ! Clean residual mean=-0.000003 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.771568 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 156 components and 0.771568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078517Jy sigma=0.000649 ! Fit after self-cal, rms=0.078477Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078477Jy sigma=0.000649 ! Fit after self-cal, rms=0.078348Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.682 mas, bmaj=25.1 mas, bpa=-15.33 degrees ! Estimated noise=3515.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252117 Jy ! Component: 100 - total flux cleaned = 0.00415301 Jy ! Component: 150 - total flux cleaned = 0.00532661 Jy ! Component: 200 - total flux cleaned = 0.0060423 Jy ! Total flux subtracted in 200 components = 0.0060423 Jy ! Clean residual min=-0.004299 max=0.003613 Jy/beam ! Clean residual mean=-0.000015 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.77761 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 222 components and 0.77761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078282Jy sigma=0.000648 ! Fit after self-cal, rms=0.078267Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000573414 Jy ! Component: 100 - total flux cleaned = 0.000976968 Jy ! Component: 150 - total flux cleaned = 0.00126327 Jy ! Component: 200 - total flux cleaned = 0.00166895 Jy ! Total flux subtracted in 200 components = 0.00166895 Jy ! Clean residual min=-0.003849 max=0.003315 Jy/beam ! Clean residual mean=-0.000014 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.779279 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 260 components and 0.779279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078240Jy sigma=0.000648 ! Fit after self-cal, rms=0.078236Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=20.12 mas, bpa=-21.9 degrees ! Estimated noise=2824.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 20.12 at -21.9 degrees (North through East) ! Clean map min=-0.0055344 max=0.68567 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078236Jy sigma=0.000648 ! Fit after self-cal, rms=0.070599Jy sigma=0.000570 ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=20.12 mas, bpa=-21.9 degrees ! Estimated noise=2822.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000683805 Jy ! Component: 100 - total flux cleaned = -0.000982571 Jy ! Component: 150 - total flux cleaned = -0.00124247 Jy ! Component: 200 - total flux cleaned = -0.00133821 Jy ! Total flux subtracted in 200 components = -0.00133821 Jy ! Clean residual min=-0.005755 max=0.003870 Jy/beam ! Clean residual mean=-0.000008 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.777941 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 286 components and 0.777941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070445Jy sigma=0.000569 ! Fit after self-cal, rms=0.070435Jy sigma=0.000569 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.76465e-05 Jy ! Component: 100 - total flux cleaned = -4.27062e-06 Jy ! Component: 150 - total flux cleaned = 0.000122481 Jy ! Component: 200 - total flux cleaned = 0.000243695 Jy ! Total flux subtracted in 200 components = 0.000243695 Jy ! Clean residual min=-0.005706 max=0.003773 Jy/beam ! Clean residual mean=-0.000007 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.778185 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 296 components and 0.778185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070353Jy sigma=0.000569 ! Fit after self-cal, rms=0.070350Jy sigma=0.000569 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070350Jy sigma=0.000569 ! Fit after self-cal, rms=0.070311Jy sigma=0.000569 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=19.58 mas, bpa=-22.56 degrees ! Estimated noise=3392.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.524591 Jy ! Component: 100 - total flux cleaned = 0.65284 Jy ! Component: 150 - total flux cleaned = 0.708081 Jy ! Component: 200 - total flux cleaned = 0.733499 Jy ! Total flux subtracted in 200 components = 0.733499 Jy ! Clean residual min=-0.011968 max=0.012196 Jy/beam ! Clean residual mean=0.000035 rms=0.003264 Jy/beam ! Combined flux in latest and established models = 0.733499 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.733499 Jy ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=20.11 mas, bpa=-21.9 degrees ! Estimated noise=2822.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146872 Jy ! Component: 100 - total flux cleaned = 0.0228122 Jy ! Component: 150 - total flux cleaned = 0.0260392 Jy ! Component: 200 - total flux cleaned = 0.0282563 Jy ! Total flux subtracted in 200 components = 0.0282563 Jy ! Clean residual min=-0.006328 max=0.005752 Jy/beam ! Clean residual mean=0.000006 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.761756 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 42 components and 0.761756 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.683 mas, bmaj=25.1 mas, bpa=-15.32 degrees ! Estimated noise=3511.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247984 Jy ! Component: 100 - total flux cleaned = 0.00454722 Jy ! Component: 150 - total flux cleaned = 0.00591907 Jy ! Component: 200 - total flux cleaned = 0.00618324 Jy ! Total flux subtracted in 200 components = 0.00618324 Jy ! Clean residual min=-0.004012 max=0.003646 Jy/beam ! Clean residual mean=-0.000001 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.767939 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111395 Jy ! Component: 100 - total flux cleaned = 0.00216887 Jy ! Component: 150 - total flux cleaned = 0.00318132 Jy ! Component: 200 - total flux cleaned = 0.00420777 Jy ! Total flux subtracted in 200 components = 0.00420777 Jy ! Clean residual min=-0.003188 max=0.002946 Jy/beam ! Clean residual mean=-0.000002 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.772147 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 115 components and 0.772147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=20.11 mas, bpa=-21.9 degrees ! Estimated noise=2822.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000763298 Jy ! Component: 100 - total flux cleaned = 0.00029979 Jy ! Component: 150 - total flux cleaned = -0.00064244 Jy ! Component: 200 - total flux cleaned = -0.00122236 Jy ! Total flux subtracted in 200 components = -0.00122236 Jy ! Clean residual min=-0.004845 max=0.004055 Jy/beam ! Clean residual mean=-0.000001 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.770924 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 0.770924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070770Jy sigma=0.000572 ! Fit after self-cal, rms=0.070783Jy sigma=0.000571 wmodel J2129-1538_S_2017_10_21_pus_map.mod ! Writing 143 model components to file: J2129-1538_S_2017_10_21_pus_map.mod wobs J2129-1538_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_10_21_pus_uvs.fits wwins J2129-1538_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J2129-1538_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000877426 Jy ! Component: 100 - total flux cleaned = -0.000386381 Jy ! Component: 150 - total flux cleaned = -6.3072e-05 Jy ! Component: 200 - total flux cleaned = 5.73424e-05 Jy ! Component: 250 - total flux cleaned = 5.54964e-05 Jy ! Component: 300 - total flux cleaned = 1.26582e-06 Jy ! Component: 350 - total flux cleaned = -0.00020771 Jy ! Component: 400 - total flux cleaned = -0.000107062 Jy ! Component: 450 - total flux cleaned = -5.7963e-05 Jy ! Component: 500 - total flux cleaned = -1.03776e-05 Jy ! Component: 550 - total flux cleaned = 3.60033e-05 Jy ! Component: 600 - total flux cleaned = 0.000126288 Jy ! Component: 650 - total flux cleaned = 0.000126833 Jy ! Component: 700 - total flux cleaned = -2.99349e-06 Jy ! Component: 750 - total flux cleaned = -0.000129757 Jy ! Component: 800 - total flux cleaned = -0.000212608 Jy ! Component: 850 - total flux cleaned = -0.000335753 Jy ! Component: 900 - total flux cleaned = -0.00041636 Jy ! Component: 950 - total flux cleaned = -0.000535008 Jy ! Component: 1000 - total flux cleaned = -0.000574206 Jy ! Component: 1050 - total flux cleaned = -0.000767958 Jy ! Component: 1100 - total flux cleaned = -0.000806369 Jy ! Component: 1150 - total flux cleaned = -0.000957712 Jy ! Component: 1200 - total flux cleaned = -0.000957603 Jy ! Component: 1250 - total flux cleaned = -0.00103194 Jy ! Component: 1300 - total flux cleaned = -0.00121486 Jy ! Component: 1350 - total flux cleaned = -0.00143281 Jy ! Component: 1400 - total flux cleaned = -0.00164937 Jy ! Component: 1450 - total flux cleaned = -0.00182934 Jy ! Component: 1500 - total flux cleaned = -0.00200799 Jy ! Component: 1550 - total flux cleaned = -0.00222126 Jy ! Component: 1600 - total flux cleaned = -0.00243328 Jy ! Component: 1650 - total flux cleaned = -0.00257371 Jy ! Component: 1700 - total flux cleaned = -0.00271382 Jy ! Component: 1750 - total flux cleaned = -0.00292291 Jy ! Component: 1800 - total flux cleaned = -0.00302692 Jy ! Component: 1850 - total flux cleaned = -0.00326874 Jy ! Component: 1900 - total flux cleaned = -0.00344087 Jy ! Component: 1950 - total flux cleaned = -0.00368162 Jy ! Component: 2000 - total flux cleaned = -0.00385338 Jy ! Component: 2050 - total flux cleaned = -0.00402493 Jy ! Component: 2100 - total flux cleaned = -0.0041963 Jy ! Component: 2150 - total flux cleaned = -0.00440179 Jy ! Component: 2200 - total flux cleaned = -0.00457324 Jy ! Component: 2250 - total flux cleaned = -0.0047104 Jy ! Component: 2300 - total flux cleaned = -0.00491573 Jy ! Component: 2350 - total flux cleaned = -0.00508681 Jy ! Component: 2400 - total flux cleaned = -0.00525816 Jy ! Component: 2450 - total flux cleaned = -0.00542994 Jy ! Component: 2500 - total flux cleaned = -0.00556756 Jy ! Component: 2550 - total flux cleaned = -0.00567113 Jy ! Component: 2600 - total flux cleaned = -0.00587935 Jy ! Component: 2650 - total flux cleaned = -0.00605411 Jy ! Component: 2700 - total flux cleaned = -0.00622984 Jy ! Component: 2750 - total flux cleaned = -0.00644334 Jy ! Component: 2800 - total flux cleaned = -0.00665812 Jy ! Component: 2850 - total flux cleaned = -0.00691117 Jy ! Component: 2900 - total flux cleaned = -0.00702077 Jy ! Component: 2950 - total flux cleaned = -0.00720551 Jy ! Component: 3000 - total flux cleaned = -0.00739342 Jy ! Component: 3050 - total flux cleaned = -0.00762281 Jy ! Component: 3100 - total flux cleaned = -0.00777819 Jy ! Component: 3150 - total flux cleaned = -0.00793585 Jy ! Component: 3200 - total flux cleaned = -0.00813612 Jy ! Component: 3250 - total flux cleaned = -0.0083399 Jy ! Component: 3300 - total flux cleaned = -0.0085059 Jy ! Component: 3350 - total flux cleaned = -0.00867441 Jy ! Component: 3400 - total flux cleaned = -0.00880274 Jy ! Component: 3450 - total flux cleaned = -0.0090216 Jy ! Component: 3500 - total flux cleaned = -0.00915572 Jy ! Component: 3550 - total flux cleaned = -0.0092927 Jy ! Component: 3600 - total flux cleaned = -0.00943178 Jy ! Component: 3650 - total flux cleaned = -0.00952653 Jy ! Component: 3700 - total flux cleaned = -0.00962237 Jy ! Component: 3750 - total flux cleaned = -0.00976891 Jy ! Component: 3800 - total flux cleaned = -0.00991818 Jy ! Component: 3850 - total flux cleaned = -0.0100203 Jy ! Component: 3900 - total flux cleaned = -0.0101248 Jy ! Component: 3950 - total flux cleaned = -0.0101775 Jy ! Component: 4000 - total flux cleaned = -0.01034 Jy ! Component: 4050 - total flux cleaned = -0.0103951 Jy ! Total flux subtracted in 4096 components = -0.0103963 Jy ! Clean residual min=-0.002997 max=0.003096 Jy/beam ! Clean residual mean=0.000002 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.760528 Jy keep ! Adding 209 model components to the UV plane model. ! The established model now contains 352 components and 0.760528 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 20.11 at -21.9 degrees (North through East) ! Clean map min=-0.0068561 max=0.69291 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.692912 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000902691 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.390825 0.390825 0.78165 1.5633 3.1266 6.2532 12.5064 25.0128 50.0256 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.692 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 20.11 at -21.9 degrees (North through East) ! Clean map min=-0.0068561 max=0.69291 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:57 2019