! Started logfile: J2129-1538_S_2017_10_09_pus_uvs.log on Sun May 12 13:20:58 2019 obs J2129-1538_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_10_09_pus_uva.fits ! AN table 1: 39 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.695869 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 3908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 58 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.477479Jy sigma=0.003764 ! Fit after self-cal, rms=0.425692Jy sigma=0.003380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.635 mas, bmaj=12.09 mas, bpa=-19.87 degrees ! Estimated noise=2122.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.489328 Jy ! Component: 100 - total flux cleaned = 0.638953 Jy ! Total flux subtracted in 100 components = 0.638953 Jy ! Clean residual min=-0.051872 max=0.064246 Jy/beam ! Clean residual mean=-0.000146 rms=0.011495 Jy/beam ! Combined flux in latest and established models = 0.638952 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.638952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226718Jy sigma=0.001658 ! Fit after self-cal, rms=0.226711Jy sigma=0.001658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=13.18 mas, bpa=-19.22 degrees ! Estimated noise=1639.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-36.5, 49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0912174 Jy ! Component: 100 - total flux cleaned = 0.141578 Jy ! Component: 150 - total flux cleaned = 0.162137 Jy ! Component: 200 - total flux cleaned = 0.166498 Jy ! Total flux subtracted in 200 components = 0.166498 Jy ! Clean residual min=-0.036003 max=0.057017 Jy/beam ! Clean residual mean=-0.000131 rms=0.009653 Jy/beam ! Combined flux in latest and established models = 0.80545 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 53 components and 0.80545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182372Jy sigma=0.001322 ! Fit after self-cal, rms=0.180136Jy sigma=0.001303 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.89 HN 0.98 KP 1.07 ! LA 1.01 MK 0.95 NL 0.90 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.96 HN 1.04 KP 1.02 ! LA 0.95 MK 1.01 NL 0.99 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.97 HN 1.02 KP 0.88 ! LA 0.75 MK 1.01 NL 1.16 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.05 KP 1.00* ! LA 1.00* MK 1.21 NL 1.00* OV 1.00* ! PT 0.92 ! ! ! Fit before self-cal, rms=0.180136Jy sigma=0.001303 ! Fit after self-cal, rms=0.159224Jy sigma=0.001082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=13.89 mas, bpa=-19.27 degrees ! Estimated noise=1643.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0180875 Jy ! Component: 100 - total flux cleaned = -0.0261208 Jy ! Component: 150 - total flux cleaned = -0.0328803 Jy ! Component: 200 - total flux cleaned = -0.0380068 Jy ! Total flux subtracted in 200 components = -0.0380068 Jy ! Clean residual min=-0.023519 max=0.029092 Jy/beam ! Clean residual mean=-0.000063 rms=0.006933 Jy/beam ! Combined flux in latest and established models = 0.767444 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 0.767444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149376Jy sigma=0.001018 ! Fit after self-cal, rms=0.149181Jy sigma=0.001015 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149181Jy sigma=0.001015 ! Fit after self-cal, rms=0.156409Jy sigma=0.000929 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=14.17 mas, bpa=-19.13 degrees ! Estimated noise=1694.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00361539 Jy ! Component: 100 - total flux cleaned = -0.00815471 Jy ! Component: 150 - total flux cleaned = -0.00881074 Jy ! Component: 200 - total flux cleaned = -0.008353 Jy ! Total flux subtracted in 200 components = -0.008353 Jy ! Clean residual min=-0.016709 max=0.022835 Jy/beam ! Clean residual mean=-0.000053 rms=0.005365 Jy/beam ! Combined flux in latest and established models = 0.759091 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 102 components and 0.759091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149672Jy sigma=0.000888 ! Fit after self-cal, rms=0.149653Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000985954 Jy ! Component: 100 - total flux cleaned = -0.00177597 Jy ! Component: 150 - total flux cleaned = -0.00287446 Jy ! Component: 200 - total flux cleaned = -0.00356647 Jy ! Total flux subtracted in 200 components = -0.00356647 Jy ! Clean residual min=-0.016370 max=0.023012 Jy/beam ! Clean residual mean=-0.000053 rms=0.005207 Jy/beam ! Combined flux in latest and established models = 0.755524 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 121 components and 0.755524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147561Jy sigma=0.000875 ! Fit after self-cal, rms=0.147522Jy sigma=0.000875 ! Inverting map ! Added new window around map position (12, -25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111827 Jy ! Component: 100 - total flux cleaned = 0.0113199 Jy ! Component: 150 - total flux cleaned = 0.00979456 Jy ! Component: 200 - total flux cleaned = 0.00792106 Jy ! Total flux subtracted in 200 components = 0.00792106 Jy ! Clean residual min=-0.014907 max=0.020452 Jy/beam ! Clean residual mean=-0.000043 rms=0.004648 Jy/beam ! Combined flux in latest and established models = 0.763445 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 146 components and 0.763445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140638Jy sigma=0.000835 ! Fit after self-cal, rms=0.140238Jy sigma=0.000831 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140238Jy sigma=0.000831 ! Fit after self-cal, rms=0.129028Jy sigma=0.000718 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.301 mas, bmaj=14.21 mas, bpa=-19.1 degrees ! Estimated noise=1697.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132452 Jy ! Component: 100 - total flux cleaned = 0.000965012 Jy ! Component: 150 - total flux cleaned = 0.00291922 Jy ! Component: 200 - total flux cleaned = 0.0051847 Jy ! Total flux subtracted in 200 components = 0.0051847 Jy ! Clean residual min=-0.011019 max=0.012840 Jy/beam ! Clean residual mean=-0.000025 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 0.76863 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 176 components and 0.76863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127049Jy sigma=0.000701 ! Fit after self-cal, rms=0.126978Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172826 Jy ! Component: 100 - total flux cleaned = -0.000235861 Jy ! Component: 150 - total flux cleaned = -0.000801046 Jy ! Component: 200 - total flux cleaned = -0.00079688 Jy ! Total flux subtracted in 200 components = -0.00079688 Jy ! Clean residual min=-0.009587 max=0.008668 Jy/beam ! Clean residual mean=-0.000015 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 0.767833 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 203 components and 0.767833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124930Jy sigma=0.000686 ! Fit after self-cal, rms=0.124891Jy sigma=0.000685 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124891Jy sigma=0.000685 ! Fit after self-cal, rms=0.124882Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.857 mas, bmaj=17.75 mas, bpa=-9.708 degrees ! Estimated noise=2047.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.82034e-05 Jy ! Component: 100 - total flux cleaned = 0.00107848 Jy ! Component: 150 - total flux cleaned = 0.00180605 Jy ! Component: 200 - total flux cleaned = 0.00242638 Jy ! Total flux subtracted in 200 components = 0.00242638 Jy ! Clean residual min=-0.009928 max=0.007978 Jy/beam ! Clean residual mean=-0.000025 rms=0.002184 Jy/beam ! Combined flux in latest and established models = 0.77026 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 224 components and 0.77026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123786Jy sigma=0.000674 ! Fit after self-cal, rms=0.123704Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785857 Jy ! Component: 100 - total flux cleaned = 0.00147309 Jy ! Component: 150 - total flux cleaned = 0.0019375 Jy ! Component: 200 - total flux cleaned = 0.00236393 Jy ! Total flux subtracted in 200 components = 0.00236393 Jy ! Clean residual min=-0.009527 max=0.007590 Jy/beam ! Clean residual mean=-0.000016 rms=0.002018 Jy/beam ! Combined flux in latest and established models = 0.772624 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 248 components and 0.772623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123260Jy sigma=0.000670 ! Fit after self-cal, rms=0.123241Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.306 mas, bmaj=14.23 mas, bpa=-19.11 degrees ! Estimated noise=1693.33 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.306 x 14.23 at -19.11 degrees (North through East) ! Clean map min=-0.016049 max=0.63956 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123241Jy sigma=0.000670 ! Fit after self-cal, rms=0.118660Jy sigma=0.000605 ! Inverting map and beam ! Estimated beam: bmin=3.315 mas, bmaj=14.22 mas, bpa=-19.11 degrees ! Estimated noise=1691.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220094 Jy ! Component: 100 - total flux cleaned = -0.00165007 Jy ! Component: 150 - total flux cleaned = -0.00148553 Jy ! Component: 200 - total flux cleaned = -0.0011874 Jy ! Total flux subtracted in 200 components = -0.0011874 Jy ! Clean residual min=-0.006156 max=0.006231 Jy/beam ! Clean residual mean=-0.000014 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.771436 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 273 components and 0.771436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118127Jy sigma=0.000600 ! Fit after self-cal, rms=0.118098Jy sigma=0.000600 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000276228 Jy ! Component: 100 - total flux cleaned = -3.8624e-06 Jy ! Component: 150 - total flux cleaned = 0.000253029 Jy ! Component: 200 - total flux cleaned = 0.00037675 Jy ! Total flux subtracted in 200 components = 0.00037675 Jy ! Clean residual min=-0.005852 max=0.005903 Jy/beam ! Clean residual mean=-0.000010 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 0.771813 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 291 components and 0.771813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117760Jy sigma=0.000597 ! Fit after self-cal, rms=0.117738Jy sigma=0.000597 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117738Jy sigma=0.000597 ! Fit after self-cal, rms=0.118054Jy sigma=0.000596 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=12.88 mas, bpa=-19.47 degrees ! Estimated noise=2197.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.503495 Jy ! Component: 100 - total flux cleaned = 0.63762 Jy ! Component: 150 - total flux cleaned = 0.694921 Jy ! Component: 200 - total flux cleaned = 0.714891 Jy ! Total flux subtracted in 200 components = 0.714891 Jy ! Clean residual min=-0.016945 max=0.018454 Jy/beam ! Clean residual mean=-0.000048 rms=0.003632 Jy/beam ! Combined flux in latest and established models = 0.714891 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.714891 Jy ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=14.22 mas, bpa=-19.11 degrees ! Estimated noise=1689.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250586 Jy ! Component: 100 - total flux cleaned = 0.0378075 Jy ! Component: 150 - total flux cleaned = 0.0439826 Jy ! Component: 200 - total flux cleaned = 0.0483046 Jy ! Total flux subtracted in 200 components = 0.0483046 Jy ! Clean residual min=-0.008873 max=0.010761 Jy/beam ! Clean residual mean=-0.000033 rms=0.002369 Jy/beam ! Combined flux in latest and established models = 0.763195 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 71 components and 0.763195 Jy ! Inverting map ! Added new window around map position (-49.5, 71). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509943 Jy ! Component: 100 - total flux cleaned = 0.00541077 Jy ! Component: 150 - total flux cleaned = 0.00664411 Jy ! Component: 200 - total flux cleaned = 0.00750805 Jy ! Total flux subtracted in 200 components = 0.00750805 Jy ! Clean residual min=-0.007483 max=0.008246 Jy/beam ! Clean residual mean=-0.000020 rms=0.001951 Jy/beam ! Combined flux in latest and established models = 0.770703 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 91 components and 0.770703 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.862 mas, bmaj=17.72 mas, bpa=-9.679 degrees ! Estimated noise=2037.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266259 Jy ! Component: 100 - total flux cleaned = 0.00398799 Jy ! Component: 150 - total flux cleaned = 0.00493241 Jy ! Component: 200 - total flux cleaned = 0.00579528 Jy ! Total flux subtracted in 200 components = 0.00579528 Jy ! Clean residual min=-0.007216 max=0.007604 Jy/beam ! Clean residual mean=-0.000034 rms=0.002025 Jy/beam ! Combined flux in latest and established models = 0.776498 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000597028 Jy ! Component: 100 - total flux cleaned = 0.00114796 Jy ! Component: 150 - total flux cleaned = 0.00166462 Jy ! Component: 200 - total flux cleaned = 0.00182926 Jy ! Total flux subtracted in 200 components = 0.00182926 Jy ! Clean residual min=-0.006868 max=0.006680 Jy/beam ! Clean residual mean=-0.000031 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 0.778328 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 162 components and 0.778328 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=14.22 mas, bpa=-19.11 degrees ! Estimated noise=1689.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145634 Jy ! Component: 100 - total flux cleaned = -0.00168718 Jy ! Component: 150 - total flux cleaned = -0.00169676 Jy ! Component: 200 - total flux cleaned = -0.0013396 Jy ! Total flux subtracted in 200 components = -0.0013396 Jy ! Clean residual min=-0.005937 max=0.005873 Jy/beam ! Clean residual mean=-0.000011 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.776988 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 186 components and 0.776988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118501Jy sigma=0.000600 ! Fit after self-cal, rms=0.118206Jy sigma=0.000598 wmodel J2129-1538_S_2017_10_09_pus_map.mod ! Writing 186 model components to file: J2129-1538_S_2017_10_09_pus_map.mod wobs J2129-1538_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_10_09_pus_uvs.fits wwins J2129-1538_S_2017_10_09_pus_map.win ! wwins: Wrote 5 windows to J2129-1538_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142482 Jy ! Component: 100 - total flux cleaned = 0.000748563 Jy ! Component: 150 - total flux cleaned = 0.00169067 Jy ! Component: 200 - total flux cleaned = 0.00231786 Jy ! Component: 250 - total flux cleaned = 0.00283423 Jy ! Component: 300 - total flux cleaned = 0.00349841 Jy ! Component: 350 - total flux cleaned = 0.00398251 Jy ! Component: 400 - total flux cleaned = 0.00445224 Jy ! Component: 450 - total flux cleaned = 0.00475673 Jy ! Component: 500 - total flux cleaned = 0.0049051 Jy ! Component: 550 - total flux cleaned = 0.00519563 Jy ! Component: 600 - total flux cleaned = 0.00540804 Jy ! Component: 650 - total flux cleaned = 0.00547836 Jy ! Component: 700 - total flux cleaned = 0.00568243 Jy ! Component: 750 - total flux cleaned = 0.00588154 Jy ! Component: 800 - total flux cleaned = 0.00581588 Jy ! Component: 850 - total flux cleaned = 0.00568884 Jy ! Component: 900 - total flux cleaned = 0.00587826 Jy ! Component: 950 - total flux cleaned = 0.00587887 Jy ! Component: 1000 - total flux cleaned = 0.0059982 Jy ! Component: 1050 - total flux cleaned = 0.00599804 Jy ! Component: 1100 - total flux cleaned = 0.00599838 Jy ! Component: 1150 - total flux cleaned = 0.00605608 Jy ! Component: 1200 - total flux cleaned = 0.00622424 Jy ! Component: 1250 - total flux cleaned = 0.00594674 Jy ! Component: 1300 - total flux cleaned = 0.00589186 Jy ! Component: 1350 - total flux cleaned = 0.0057848 Jy ! Component: 1400 - total flux cleaned = 0.00567912 Jy ! Component: 1450 - total flux cleaned = 0.00557429 Jy ! Component: 1500 - total flux cleaned = 0.00557388 Jy ! Component: 1550 - total flux cleaned = 0.00552239 Jy ! Component: 1600 - total flux cleaned = 0.00537134 Jy ! Component: 1650 - total flux cleaned = 0.00527177 Jy ! Component: 1700 - total flux cleaned = 0.00512487 Jy ! Component: 1750 - total flux cleaned = 0.00507752 Jy ! Component: 1800 - total flux cleaned = 0.00507865 Jy ! Component: 1850 - total flux cleaned = 0.00517349 Jy ! Component: 1900 - total flux cleaned = 0.00507965 Jy ! Component: 1950 - total flux cleaned = 0.00498688 Jy ! Component: 2000 - total flux cleaned = 0.00503217 Jy ! Component: 2050 - total flux cleaned = 0.00516682 Jy ! Component: 2100 - total flux cleaned = 0.00503335 Jy ! Component: 2150 - total flux cleaned = 0.00498938 Jy ! Component: 2200 - total flux cleaned = 0.00490219 Jy ! Component: 2250 - total flux cleaned = 0.00490257 Jy ! Component: 2300 - total flux cleaned = 0.00494528 Jy ! Component: 2350 - total flux cleaned = 0.00502937 Jy ! Component: 2400 - total flux cleaned = 0.00494553 Jy ! Component: 2450 - total flux cleaned = 0.00502741 Jy ! Component: 2500 - total flux cleaned = 0.0050679 Jy ! Component: 2550 - total flux cleaned = 0.00510772 Jy ! Component: 2600 - total flux cleaned = 0.00506832 Jy ! Component: 2650 - total flux cleaned = 0.00518612 Jy ! Component: 2700 - total flux cleaned = 0.00518638 Jy ! Component: 2750 - total flux cleaned = 0.00530194 Jy ! Component: 2800 - total flux cleaned = 0.00514894 Jy ! Component: 2850 - total flux cleaned = 0.00503548 Jy ! Component: 2900 - total flux cleaned = 0.00522254 Jy ! Component: 2950 - total flux cleaned = 0.00503707 Jy ! Component: 3000 - total flux cleaned = 0.00503722 Jy ! Component: 3050 - total flux cleaned = 0.00489256 Jy ! Component: 3100 - total flux cleaned = 0.00503616 Jy ! Component: 3150 - total flux cleaned = 0.00500014 Jy ! Component: 3200 - total flux cleaned = 0.00496512 Jy ! Component: 3250 - total flux cleaned = 0.00499955 Jy ! Component: 3300 - total flux cleaned = 0.00492913 Jy ! Component: 3350 - total flux cleaned = 0.00489451 Jy ! Component: 3400 - total flux cleaned = 0.00486042 Jy ! Component: 3450 - total flux cleaned = 0.00479354 Jy ! Component: 3500 - total flux cleaned = 0.00482668 Jy ! Component: 3550 - total flux cleaned = 0.004794 Jy ! Component: 3600 - total flux cleaned = 0.00472822 Jy ! Component: 3650 - total flux cleaned = 0.00476055 Jy ! Component: 3700 - total flux cleaned = 0.00463153 Jy ! Component: 3750 - total flux cleaned = 0.00459934 Jy ! Component: 3800 - total flux cleaned = 0.00444114 Jy ! Component: 3850 - total flux cleaned = 0.00444106 Jy ! Component: 3900 - total flux cleaned = 0.00444069 Jy ! Component: 3950 - total flux cleaned = 0.00434831 Jy ! Component: 4000 - total flux cleaned = 0.00431753 Jy ! Component: 4050 - total flux cleaned = 0.00407468 Jy ! Total flux subtracted in 4096 components = 0.0040151 Jy ! Clean residual min=-0.001673 max=0.001665 Jy/beam ! Clean residual mean=-0.000003 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.781003 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 463 components and 0.781003 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 14.22 at -19.11 degrees (North through East) ! Clean map min=-0.013255 max=0.63838 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.638378 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000579798 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.272471 0.272471 0.544942 1.08988 2.17977 4.35954 8.71908 17.4382 34.8763 69.7526 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.638 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.316 x 14.22 at -19.11 degrees (North through East) ! Clean map min=-0.013255 max=0.63838 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:21:03 2019