! Started logfile: J2129-1538_S_2017_06_15_pus_uvs.log on Tue May 7 15:28:28 2019 obs J2129-1538_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_06_15_pus_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.0787879 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.477043Jy sigma=0.003154 ! Fit after self-cal, rms=0.445713Jy sigma=0.002698 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=12.37 mas, bpa=35.68 degrees ! Estimated noise=10964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.447457 Jy ! Component: 100 - total flux cleaned = 0.587029 Jy ! Total flux subtracted in 100 components = 0.587029 Jy ! Clean residual min=-0.052957 max=0.054310 Jy/beam ! Clean residual mean=-0.000005 rms=0.021125 Jy/beam ! Combined flux in latest and established models = 0.587029 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.587029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156385Jy sigma=0.000939 ! Fit after self-cal, rms=0.156142Jy sigma=0.000938 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=13.46 mas, bpa=36.74 degrees ! Estimated noise=10036.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274861 Jy ! Component: 100 - total flux cleaned = 0.0198236 Jy ! Component: 150 - total flux cleaned = 0.0466673 Jy ! Component: 200 - total flux cleaned = 0.0573369 Jy ! Total flux subtracted in 200 components = 0.0573369 Jy ! Clean residual min=-0.021802 max=0.022330 Jy/beam ! Clean residual mean=-0.000015 rms=0.007083 Jy/beam ! Combined flux in latest and established models = 0.644366 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 59 components and 0.644366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114037Jy sigma=0.000674 ! Fit after self-cal, rms=0.113329Jy sigma=0.000670 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.95 KP 1.00* ! LA 1.00* MK 1.00* NL 0.92 OV 1.00* ! PT 1.00* SC 1.02 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.113329Jy sigma=0.000670 ! Fit after self-cal, rms=0.126359Jy sigma=0.000738 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.927 mas, bmaj=12.6 mas, bpa=31.44 degrees ! Estimated noise=15046.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279635 Jy ! Component: 100 - total flux cleaned = 0.00511417 Jy ! Component: 150 - total flux cleaned = 0.00788058 Jy ! Component: 200 - total flux cleaned = 0.0100009 Jy ! Total flux subtracted in 200 components = 0.0100009 Jy ! Clean residual min=-0.004136 max=0.004108 Jy/beam ! Clean residual mean=-0.000001 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.654367 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 93 components and 0.654367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124689Jy sigma=0.000728 ! Fit after self-cal, rms=0.124680Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124680Jy sigma=0.000728 ! Fit after self-cal, rms=0.124037Jy sigma=0.000727 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=12.59 mas, bpa=31.44 degrees ! Estimated noise=14975.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811429 Jy ! Component: 100 - total flux cleaned = 0.000363752 Jy ! Component: 150 - total flux cleaned = 7.21461e-05 Jy ! Component: 200 - total flux cleaned = -1.18309e-05 Jy ! Total flux subtracted in 200 components = -1.18309e-05 Jy ! Clean residual min=-0.001499 max=0.001528 Jy/beam ! Clean residual mean=0.000001 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.654355 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 123 components and 0.654355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123965Jy sigma=0.000727 ! Fit after self-cal, rms=0.123971Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000343425 Jy ! Component: 100 - total flux cleaned = -0.000591519 Jy ! Component: 150 - total flux cleaned = -0.000513661 Jy ! Component: 200 - total flux cleaned = -0.000499264 Jy ! Total flux subtracted in 200 components = -0.000499264 Jy ! Clean residual min=-0.001614 max=0.001571 Jy/beam ! Clean residual mean=0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.653856 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 151 components and 0.653856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123946Jy sigma=0.000727 ! Fit after self-cal, rms=0.123943Jy sigma=0.000727 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123943Jy sigma=0.000727 ! Fit after self-cal, rms=0.123968Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=12.6 mas, bpa=31.43 degrees ! Estimated noise=14983.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106709 Jy ! Component: 100 - total flux cleaned = 0.001324 Jy ! Component: 150 - total flux cleaned = 0.00143125 Jy ! Component: 200 - total flux cleaned = 0.00156964 Jy ! Total flux subtracted in 200 components = 0.00156964 Jy ! Clean residual min=-0.001331 max=0.001358 Jy/beam ! Clean residual mean=0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.655426 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 183 components and 0.655426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123940Jy sigma=0.000727 ! Fit after self-cal, rms=0.123941Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000963857 Jy ! Component: 100 - total flux cleaned = -0.000963049 Jy ! Component: 150 - total flux cleaned = -0.000774792 Jy ! Component: 200 - total flux cleaned = -0.00055917 Jy ! Total flux subtracted in 200 components = -0.00055917 Jy ! Clean residual min=-0.001007 max=0.000974 Jy/beam ! Clean residual mean=0.000001 rms=0.000287 Jy/beam ! Combined flux in latest and established models = 0.654866 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 202 components and 0.654867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123917Jy sigma=0.000727 ! Fit after self-cal, rms=0.123916Jy sigma=0.000727 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123916Jy sigma=0.000727 ! Fit after self-cal, rms=0.123985Jy sigma=0.000727 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.698 mas, bmaj=13.91 mas, bpa=27.87 degrees ! Estimated noise=19254.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352285 Jy ! Component: 100 - total flux cleaned = 0.00150733 Jy ! Component: 150 - total flux cleaned = 0.00377755 Jy ! Component: 200 - total flux cleaned = 0.00867161 Jy ! Total flux subtracted in 200 components = 0.00867161 Jy ! Clean residual min=-0.004472 max=0.004775 Jy/beam ! Clean residual mean=0.000008 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.663538 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 253 components and 0.663538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124000Jy sigma=0.000727 ! Fit after self-cal, rms=0.123980Jy sigma=0.000727 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012876 Jy ! Component: 100 - total flux cleaned = 0.00262903 Jy ! Component: 150 - total flux cleaned = 0.00476266 Jy ! Component: 200 - total flux cleaned = 0.00811081 Jy ! Total flux subtracted in 200 components = 0.00811081 Jy ! Clean residual min=-0.003851 max=0.003883 Jy/beam ! Clean residual mean=0.000003 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.671649 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 302 components and 0.671649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123966Jy sigma=0.000726 ! Fit after self-cal, rms=0.123966Jy sigma=0.000726 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=12.6 mas, bpa=31.43 degrees ! Estimated noise=14992.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.926 x 12.6 at 31.43 degrees (North through East) ! Clean map min=-0.021467 max=0.37772 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=12.6 mas, bpa=31.43 degrees ! Estimated noise=14992.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.432638 Jy ! Component: 100 - total flux cleaned = 0.585551 Jy ! Component: 150 - total flux cleaned = 0.621391 Jy ! Component: 200 - total flux cleaned = 0.621485 Jy ! Total flux subtracted in 200 components = 0.621485 Jy ! Clean residual min=-0.069398 max=0.068233 Jy/beam ! Clean residual mean=-0.000000 rms=0.020032 Jy/beam ! Combined flux in latest and established models = 0.621485 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.621485 Jy ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=12.6 mas, bpa=31.43 degrees ! Estimated noise=14992.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176933 Jy ! Component: 100 - total flux cleaned = 0.0112598 Jy ! Component: 150 - total flux cleaned = 0.0142231 Jy ! Component: 200 - total flux cleaned = 0.0182434 Jy ! Total flux subtracted in 200 components = 0.0182434 Jy ! Clean residual min=-0.017090 max=0.017205 Jy/beam ! Clean residual mean=-0.000003 rms=0.006427 Jy/beam ! Combined flux in latest and established models = 0.639728 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 68 components and 0.639728 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.698 mas, bmaj=13.91 mas, bpa=27.87 degrees ! Estimated noise=19254.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00900773 Jy ! Component: 100 - total flux cleaned = -0.00957496 Jy ! Component: 150 - total flux cleaned = -0.0129036 Jy ! Component: 200 - total flux cleaned = -0.0176877 Jy ! Total flux subtracted in 200 components = -0.0176877 Jy ! Clean residual min=-0.007682 max=0.007557 Jy/beam ! Clean residual mean=0.000000 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.622041 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110666 Jy ! Component: 100 - total flux cleaned = -0.0296372 Jy ! Component: 150 - total flux cleaned = -0.0644023 Jy ! Component: 200 - total flux cleaned = -0.12252 Jy ! Total flux subtracted in 200 components = -0.12252 Jy ! Clean residual min=-0.069983 max=0.069176 Jy/beam ! Clean residual mean=0.000040 rms=0.017594 Jy/beam ! Combined flux in latest and established models = 0.499521 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 131 components and 0.499521 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=12.6 mas, bpa=31.43 degrees ! Estimated noise=14992.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110156 Jy ! Component: 100 - total flux cleaned = 0.00355661 Jy ! Component: 150 - total flux cleaned = -0.00456932 Jy ! Component: 200 - total flux cleaned = -0.018268 Jy ! Total flux subtracted in 200 components = -0.018268 Jy ! Clean residual min=-0.022685 max=0.023080 Jy/beam ! Clean residual mean=-0.000025 rms=0.005435 Jy/beam ! Combined flux in latest and established models = 0.481253 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 177 components and 0.481253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124778Jy sigma=0.000733 ! Fit after self-cal, rms=0.124565Jy sigma=0.000731 wmodel J2129-1538_S_2017_06_15_pus_map.mod ! Writing 177 model components to file: J2129-1538_S_2017_06_15_pus_map.mod wobs J2129-1538_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_06_15_pus_uvs.fits wwins J2129-1538_S_2017_06_15_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J2129-1538_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.926 x 12.6 at 31.43 degrees (North through East) ! Clean map min=-0.069843 max=0.29688 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.29688 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00439677 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.44297 4.44297 8.88593 17.7719 35.5437 71.0875 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0131 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.296 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.926 x 12.6 at 31.43 degrees (North through East) ! Clean map min=-0.069843 max=0.29688 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:28:31 2019