! Started logfile: J2129-1538_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:56:59 2019 obs J2129-1538_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_05_31_pus_uva.fits ! AN table 1: 27 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.337449 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 133 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 195 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.412263Jy sigma=0.002701 ! Fit after self-cal, rms=0.401511Jy sigma=0.002613 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=5.876 mas, bpa=-3.099 degrees ! Estimated noise=3145.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.529292 Jy ! Component: 100 - total flux cleaned = 0.659234 Jy ! Total flux subtracted in 100 components = 0.659234 Jy ! Clean residual min=-0.025749 max=0.053841 Jy/beam ! Clean residual mean=-0.000000 rms=0.009057 Jy/beam ! Combined flux in latest and established models = 0.659234 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.659234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316318Jy sigma=0.001217 ! Fit after self-cal, rms=0.316313Jy sigma=0.001217 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.781 mas, bmaj=6.793 mas, bpa=-2.105 degrees ! Estimated noise=2494.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0755481 Jy ! Component: 100 - total flux cleaned = 0.110772 Jy ! Component: 150 - total flux cleaned = 0.129092 Jy ! Component: 200 - total flux cleaned = 0.138924 Jy ! Total flux subtracted in 200 components = 0.138924 Jy ! Clean residual min=-0.015377 max=0.019756 Jy/beam ! Clean residual mean=0.000027 rms=0.004380 Jy/beam ! Combined flux in latest and established models = 0.798158 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.798158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287752Jy sigma=0.000967 ! Fit after self-cal, rms=0.287756Jy sigma=0.000967 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.00* HN 1.00* KP 1.03 ! LA 1.00 MK 0.99 NL 0.93 OV 1.00* ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* HN 1.00* KP 1.01 ! LA 0.98 MK 0.98 NL 1.04 OV 1.00* ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* KP 1.00 ! LA 0.98 MK 1.03 NL 0.97 OV 1.00* ! PT 0.97 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.08 ! LA 0.98 MK 1.15 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.287756Jy sigma=0.000967 ! Fit after self-cal, rms=0.312707Jy sigma=0.000871 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.8 mas, bpa=-2.008 degrees ! Estimated noise=2512.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762574 Jy ! Component: 100 - total flux cleaned = 0.0107989 Jy ! Component: 150 - total flux cleaned = 0.0123675 Jy ! Component: 200 - total flux cleaned = 0.0126993 Jy ! Total flux subtracted in 200 components = 0.0126993 Jy ! Clean residual min=-0.016280 max=0.017631 Jy/beam ! Clean residual mean=0.000025 rms=0.003873 Jy/beam ! Combined flux in latest and established models = 0.810857 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 58 components and 0.810857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311325Jy sigma=0.000874 ! Fit after self-cal, rms=0.311347Jy sigma=0.000874 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311347Jy sigma=0.000874 ! Fit after self-cal, rms=0.300191Jy sigma=0.000791 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=6.793 mas, bpa=-1.905 degrees ! Estimated noise=2551.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103953 Jy ! Component: 100 - total flux cleaned = 0.0146733 Jy ! Component: 150 - total flux cleaned = 0.0167909 Jy ! Component: 200 - total flux cleaned = 0.0179597 Jy ! Total flux subtracted in 200 components = 0.0179597 Jy ! Clean residual min=-0.012700 max=0.013250 Jy/beam ! Clean residual mean=0.000024 rms=0.003309 Jy/beam ! Combined flux in latest and established models = 0.828817 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.828817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298170Jy sigma=0.000792 ! Fit after self-cal, rms=0.298170Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415226 Jy ! Component: 100 - total flux cleaned = 0.000490374 Jy ! Component: 150 - total flux cleaned = 0.000559453 Jy ! Component: 200 - total flux cleaned = 0.000624304 Jy ! Total flux subtracted in 200 components = 0.000624304 Jy ! Clean residual min=-0.012768 max=0.013234 Jy/beam ! Clean residual mean=0.000024 rms=0.003308 Jy/beam ! Combined flux in latest and established models = 0.829441 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.829441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298115Jy sigma=0.000792 ! Fit after self-cal, rms=0.298115Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298115Jy sigma=0.000792 ! Fit after self-cal, rms=0.088404Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=6.799 mas, bpa=-1.868 degrees ! Estimated noise=2552.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000555363 Jy ! Component: 100 - total flux cleaned = -0.000518607 Jy ! Component: 150 - total flux cleaned = -0.000488318 Jy ! Component: 200 - total flux cleaned = -0.000488974 Jy ! Total flux subtracted in 200 components = -0.000488974 Jy ! Clean residual min=-0.007327 max=0.007805 Jy/beam ! Clean residual mean=-0.000009 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.828952 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 76 components and 0.828952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088380Jy sigma=0.000646 ! Fit after self-cal, rms=0.088289Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-84.5, 110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00688729 Jy ! Component: 100 - total flux cleaned = 0.0101706 Jy ! Component: 150 - total flux cleaned = 0.012366 Jy ! Component: 200 - total flux cleaned = 0.0140594 Jy ! Total flux subtracted in 200 components = 0.0140594 Jy ! Clean residual min=-0.005935 max=0.005161 Jy/beam ! Clean residual mean=-0.000006 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.843012 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 112 components and 0.843012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087778Jy sigma=0.000641 ! Fit after self-cal, rms=0.087743Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087743Jy sigma=0.000641 ! Fit after self-cal, rms=0.087660Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.094 mas, bmaj=15.08 mas, bpa=-1.102 degrees ! Estimated noise=3529.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318704 Jy ! Component: 100 - total flux cleaned = 0.00455832 Jy ! Component: 150 - total flux cleaned = 0.00483385 Jy ! Component: 200 - total flux cleaned = 0.00495907 Jy ! Total flux subtracted in 200 components = 0.00495907 Jy ! Clean residual min=-0.006719 max=0.006692 Jy/beam ! Clean residual mean=-0.000010 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.847971 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 0.847971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087610Jy sigma=0.000640 ! Fit after self-cal, rms=0.087597Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048072 Jy ! Component: 100 - total flux cleaned = 0.000443367 Jy ! Component: 150 - total flux cleaned = 0.000445493 Jy ! Component: 200 - total flux cleaned = 0.000482006 Jy ! Total flux subtracted in 200 components = 0.000482006 Jy ! Clean residual min=-0.006641 max=0.006731 Jy/beam ! Clean residual mean=-0.000006 rms=0.001700 Jy/beam ! Combined flux in latest and established models = 0.848453 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 0.848453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087580Jy sigma=0.000640 ! Fit after self-cal, rms=0.087580Jy sigma=0.000640 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=6.802 mas, bpa=-1.875 degrees ! Estimated noise=2550.22 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.767 x 6.802 at -1.875 degrees (North through East) ! Clean map min=-0.0054862 max=0.71993 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087580Jy sigma=0.000640 ! Fit after self-cal, rms=0.079783Jy sigma=0.000576 ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=6.8 mas, bpa=-1.913 degrees ! Estimated noise=2548.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.25228e-05 Jy ! Component: 100 - total flux cleaned = -8.53639e-05 Jy ! Component: 150 - total flux cleaned = -0.000197934 Jy ! Component: 200 - total flux cleaned = -0.000296752 Jy ! Total flux subtracted in 200 components = -0.000296752 Jy ! Clean residual min=-0.005770 max=0.005003 Jy/beam ! Clean residual mean=-0.000003 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.848156 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 149 components and 0.848156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079692Jy sigma=0.000575 ! Fit after self-cal, rms=0.079696Jy sigma=0.000575 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.63675e-05 Jy ! Component: 100 - total flux cleaned = -5.33074e-05 Jy ! Component: 150 - total flux cleaned = -5.47803e-05 Jy ! Component: 200 - total flux cleaned = -9.44963e-05 Jy ! Total flux subtracted in 200 components = -9.44963e-05 Jy ! Clean residual min=-0.005776 max=0.004945 Jy/beam ! Clean residual mean=-0.000003 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.848061 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 155 components and 0.848061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079648Jy sigma=0.000575 ! Fit after self-cal, rms=0.079650Jy sigma=0.000575 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079650Jy sigma=0.000575 ! Fit after self-cal, rms=0.079642Jy sigma=0.000575 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.279 mas, bmaj=5.89 mas, bpa=-2.876 degrees ! Estimated noise=3201.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.53869 Jy ! Component: 100 - total flux cleaned = 0.669293 Jy ! Component: 150 - total flux cleaned = 0.726159 Jy ! Component: 200 - total flux cleaned = 0.758457 Jy ! Total flux subtracted in 200 components = 0.758457 Jy ! Clean residual min=-0.012855 max=0.019564 Jy/beam ! Clean residual mean=-0.000010 rms=0.003925 Jy/beam ! Combined flux in latest and established models = 0.758457 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.758457 Jy ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=6.8 mas, bpa=-1.917 degrees ! Estimated noise=2548.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45.5, 78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.032401 Jy ! Component: 100 - total flux cleaned = 0.0493131 Jy ! Component: 150 - total flux cleaned = 0.0591114 Jy ! Component: 200 - total flux cleaned = 0.0659511 Jy ! Total flux subtracted in 200 components = 0.0659511 Jy ! Clean residual min=-0.007629 max=0.006717 Jy/beam ! Clean residual mean=-0.000011 rms=0.001839 Jy/beam ! Combined flux in latest and established models = 0.824408 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 60 components and 0.824408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.091 mas, bmaj=15.07 mas, bpa=-1.148 degrees ! Estimated noise=3528.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856668 Jy ! Component: 100 - total flux cleaned = 0.0138907 Jy ! Component: 150 - total flux cleaned = 0.0174273 Jy ! Component: 200 - total flux cleaned = 0.0198223 Jy ! Total flux subtracted in 200 components = 0.0198223 Jy ! Clean residual min=-0.007404 max=0.005947 Jy/beam ! Clean residual mean=-0.000017 rms=0.001646 Jy/beam ! Combined flux in latest and established models = 0.84423 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147651 Jy ! Component: 100 - total flux cleaned = 0.00174269 Jy ! Component: 150 - total flux cleaned = 0.0018876 Jy ! Component: 200 - total flux cleaned = 0.00197875 Jy ! Total flux subtracted in 200 components = 0.00197875 Jy ! Clean residual min=-0.007160 max=0.006222 Jy/beam ! Clean residual mean=-0.000017 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.846209 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 107 components and 0.846209 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=6.8 mas, bpa=-1.917 degrees ! Estimated noise=2548.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.36162e-05 Jy ! Component: 100 - total flux cleaned = -0.000412676 Jy ! Component: 150 - total flux cleaned = -0.000496857 Jy ! Component: 200 - total flux cleaned = -0.000418272 Jy ! Total flux subtracted in 200 components = -0.000418272 Jy ! Clean residual min=-0.005730 max=0.005075 Jy/beam ! Clean residual mean=-0.000003 rms=0.001424 Jy/beam ! Combined flux in latest and established models = 0.845791 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 124 components and 0.845791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079718Jy sigma=0.000575 ! Fit after self-cal, rms=0.079694Jy sigma=0.000575 wmodel J2129-1538_S_2017_05_31_pus_map.mod ! Writing 124 model components to file: J2129-1538_S_2017_05_31_pus_map.mod wobs J2129-1538_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_05_31_pus_uvs.fits wwins J2129-1538_S_2017_05_31_pus_map.win ! wwins: Wrote 3 windows to J2129-1538_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209382 Jy ! Component: 100 - total flux cleaned = -0.00308376 Jy ! Component: 150 - total flux cleaned = -0.00393226 Jy ! Component: 200 - total flux cleaned = -0.0049758 Jy ! Component: 250 - total flux cleaned = -0.00574324 Jy ! Component: 300 - total flux cleaned = -0.00632914 Jy ! Component: 350 - total flux cleaned = -0.00702826 Jy ! Component: 400 - total flux cleaned = -0.00736866 Jy ! Component: 450 - total flux cleaned = -0.0077648 Jy ! Component: 500 - total flux cleaned = -0.00802142 Jy ! Component: 550 - total flux cleaned = -0.00833039 Jy ! Component: 600 - total flux cleaned = -0.00845123 Jy ! Component: 650 - total flux cleaned = -0.00862847 Jy ! Component: 700 - total flux cleaned = -0.00862818 Jy ! Component: 750 - total flux cleaned = -0.00857297 Jy ! Component: 800 - total flux cleaned = -0.00862636 Jy ! Component: 850 - total flux cleaned = -0.00867932 Jy ! Component: 900 - total flux cleaned = -0.00862756 Jy ! Component: 950 - total flux cleaned = -0.00872927 Jy ! Component: 1000 - total flux cleaned = -0.00868021 Jy ! Component: 1050 - total flux cleaned = -0.00882586 Jy ! Component: 1100 - total flux cleaned = -0.00858926 Jy ! Component: 1150 - total flux cleaned = -0.00863707 Jy ! Component: 1200 - total flux cleaned = -0.00868336 Jy ! Component: 1250 - total flux cleaned = -0.00859355 Jy ! Component: 1300 - total flux cleaned = -0.00854961 Jy ! Component: 1350 - total flux cleaned = -0.00846202 Jy ! Component: 1400 - total flux cleaned = -0.00846174 Jy ! Component: 1450 - total flux cleaned = -0.00846268 Jy ! Component: 1500 - total flux cleaned = -0.00842139 Jy ! Component: 1550 - total flux cleaned = -0.00842063 Jy ! Component: 1600 - total flux cleaned = -0.00834125 Jy ! Component: 1650 - total flux cleaned = -0.00818793 Jy ! Component: 1700 - total flux cleaned = -0.00811259 Jy ! Component: 1750 - total flux cleaned = -0.00807545 Jy ! Component: 1800 - total flux cleaned = -0.0080747 Jy ! Component: 1850 - total flux cleaned = -0.00789398 Jy ! Component: 1900 - total flux cleaned = -0.00782356 Jy ! Component: 1950 - total flux cleaned = -0.00775381 Jy ! Component: 2000 - total flux cleaned = -0.0077888 Jy ! Component: 2050 - total flux cleaned = -0.00782312 Jy ! Component: 2100 - total flux cleaned = -0.00782344 Jy ! Component: 2150 - total flux cleaned = -0.00792286 Jy ! Component: 2200 - total flux cleaned = -0.00792257 Jy ! Component: 2250 - total flux cleaned = -0.00785783 Jy ! Component: 2300 - total flux cleaned = -0.00792103 Jy ! Component: 2350 - total flux cleaned = -0.00788923 Jy ! Component: 2400 - total flux cleaned = -0.00785779 Jy ! Component: 2450 - total flux cleaned = -0.00785783 Jy ! Component: 2500 - total flux cleaned = -0.00788798 Jy ! Component: 2550 - total flux cleaned = -0.00782891 Jy ! Component: 2600 - total flux cleaned = -0.00788809 Jy ! Component: 2650 - total flux cleaned = -0.00782981 Jy ! Component: 2700 - total flux cleaned = -0.00791605 Jy ! Component: 2750 - total flux cleaned = -0.007859 Jy ! Component: 2800 - total flux cleaned = -0.00797126 Jy ! Component: 2850 - total flux cleaned = -0.00797121 Jy ! Component: 2900 - total flux cleaned = -0.008026 Jy ! Component: 2950 - total flux cleaned = -0.00810762 Jy ! Component: 3000 - total flux cleaned = -0.00816121 Jy ! Component: 3050 - total flux cleaned = -0.00818799 Jy ! Component: 3100 - total flux cleaned = -0.00831939 Jy ! Component: 3150 - total flux cleaned = -0.00826761 Jy ! Component: 3200 - total flux cleaned = -0.00837033 Jy ! Component: 3250 - total flux cleaned = -0.00829426 Jy ! Component: 3300 - total flux cleaned = -0.00834478 Jy ! Component: 3350 - total flux cleaned = -0.00834471 Jy ! Component: 3400 - total flux cleaned = -0.0083697 Jy ! Component: 3450 - total flux cleaned = -0.00844279 Jy ! Component: 3500 - total flux cleaned = -0.00841882 Jy ! Component: 3550 - total flux cleaned = -0.0084666 Jy ! Component: 3600 - total flux cleaned = -0.00841938 Jy ! Component: 3650 - total flux cleaned = -0.00839557 Jy ! Component: 3700 - total flux cleaned = -0.00844215 Jy ! Component: 3750 - total flux cleaned = -0.00846518 Jy ! Component: 3800 - total flux cleaned = -0.00853392 Jy ! Component: 3850 - total flux cleaned = -0.00855649 Jy ! Component: 3900 - total flux cleaned = -0.00857901 Jy ! Component: 3950 - total flux cleaned = -0.00857901 Jy ! Component: 4000 - total flux cleaned = -0.00864511 Jy ! Component: 4050 - total flux cleaned = -0.00866694 Jy ! Total flux subtracted in 4096 components = -0.00866698 Jy ! Clean residual min=-0.001287 max=0.001253 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.837124 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 356 components and 0.837123 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.766 x 6.8 at -1.917 degrees (North through East) ! Clean map min=-0.0033398 max=0.71943 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.719428 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000361444 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.150721 0.150721 0.301442 0.602885 1.20577 2.41154 4.82308 9.64615 19.2923 38.5846 77.1692 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.719 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.766 x 6.8 at -1.917 degrees (North through East) ! Clean map min=-0.0033398 max=0.71943 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:57:03 2019