! Started logfile: J2129-1538_S_2017_05_01_pus_uvs.log on Wed May 1 18:44:29 2019 obs J2129-1538_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_05_01_pus_uva.fits ! AN table 1: 18 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.881481 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 2856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.341021Jy sigma=0.030510 ! Fit after self-cal, rms=0.343553Jy sigma=0.030489 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=8.059 mas, bpa=-11.86 degrees ! Estimated noise=1388.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339577 Jy ! Component: 100 - total flux cleaned = 0.393096 Jy ! Total flux subtracted in 100 components = 0.393096 Jy ! Clean residual min=-0.129026 max=0.150670 Jy/beam ! Clean residual mean=0.001114 rms=0.042371 Jy/beam ! Combined flux in latest and established models = 0.393096 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.393096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.461551Jy sigma=0.011976 ! Fit after self-cal, rms=0.461499Jy sigma=0.011975 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.578 mas, bmaj=9.051 mas, bpa=-9.721 degrees ! Estimated noise=1159.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214124 Jy ! Component: 100 - total flux cleaned = 0.0174123 Jy ! Component: 150 - total flux cleaned = 0.010617 Jy ! Component: 200 - total flux cleaned = 0.00458809 Jy ! Total flux subtracted in 200 components = 0.00458809 Jy ! Clean residual min=-0.132013 max=0.178988 Jy/beam ! Clean residual mean=0.000697 rms=0.042206 Jy/beam ! Combined flux in latest and established models = 0.397684 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.397684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.421297Jy sigma=0.012491 ! Fit after self-cal, rms=0.421303Jy sigma=0.012491 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 0.64 HN 0.84 KP 0.72 ! LA 0.68 MK 0.89 NL 0.69 OV 0.73 ! PT 0.70 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.65 HN 0.89 KP 0.67 ! LA 0.65 MK 0.82 NL 0.73 OV 0.75 ! PT 0.67 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.68 HN 0.89 KP 0.68 ! LA 0.67 MK 0.84 NL 0.71 OV 0.68 ! PT 0.67 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.70 HN 0.84 KP 1.00* ! LA 37.71 MK 1.04 NL 1.00* OV 1.00* ! PT 0.70 SC 1.00* ! ! ! Fit before self-cal, rms=0.421303Jy sigma=0.012491 ! Fit after self-cal, rms=0.096599Jy sigma=0.000907 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.486 mas, bpa=-6.265 degrees ! Estimated noise=1127.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496047 Jy ! Component: 100 - total flux cleaned = 0.00682653 Jy ! Component: 150 - total flux cleaned = 0.00700695 Jy ! Component: 200 - total flux cleaned = 0.00726 Jy ! Total flux subtracted in 200 components = 0.00726 Jy ! Clean residual min=-0.008021 max=0.009657 Jy/beam ! Clean residual mean=-0.000001 rms=0.001996 Jy/beam ! Combined flux in latest and established models = 0.404944 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.404944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096109Jy sigma=0.000904 ! Fit after self-cal, rms=0.090034Jy sigma=0.000845 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090034Jy sigma=0.000845 ! Fit after self-cal, rms=0.072245Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.446 mas, bmaj=8.504 mas, bpa=-6.104 degrees ! Estimated noise=1134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581179 Jy ! Component: 100 - total flux cleaned = 0.0061845 Jy ! Component: 150 - total flux cleaned = 0.00627916 Jy ! Component: 200 - total flux cleaned = 0.00636378 Jy ! Total flux subtracted in 200 components = 0.00636378 Jy ! Clean residual min=-0.004565 max=0.006284 Jy/beam ! Clean residual mean=-0.000000 rms=0.001344 Jy/beam ! Combined flux in latest and established models = 0.411307 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.411307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071579Jy sigma=0.000707 ! Fit after self-cal, rms=0.071686Jy sigma=0.000707 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283977 Jy ! Component: 100 - total flux cleaned = 0.00424766 Jy ! Component: 150 - total flux cleaned = 0.00474988 Jy ! Component: 200 - total flux cleaned = 0.00508013 Jy ! Total flux subtracted in 200 components = 0.00508013 Jy ! Clean residual min=-0.004172 max=0.005711 Jy/beam ! Clean residual mean=-0.000000 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.416388 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.416388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070839Jy sigma=0.000698 ! Fit after self-cal, rms=0.070762Jy sigma=0.000698 ! Inverting map ! Added new window around map position (14, -46.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438948 Jy ! Component: 100 - total flux cleaned = 0.00501969 Jy ! Component: 150 - total flux cleaned = 0.0053334 Jy ! Component: 200 - total flux cleaned = 0.0055197 Jy ! Total flux subtracted in 200 components = 0.0055197 Jy ! Clean residual min=-0.004156 max=0.004911 Jy/beam ! Clean residual mean=0.000001 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.421907 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.421907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070187Jy sigma=0.000691 ! Fit after self-cal, rms=0.070150Jy sigma=0.000690 ! Inverting map ! Added new window around map position (-115, -59.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00412577 Jy ! Component: 100 - total flux cleaned = 0.00433777 Jy ! Component: 150 - total flux cleaned = 0.00433313 Jy ! Component: 200 - total flux cleaned = 0.0041644 Jy ! Total flux subtracted in 200 components = 0.0041644 Jy ! Clean residual min=-0.004028 max=0.004438 Jy/beam ! Clean residual mean=-0.000000 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.426072 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 86 components and 0.426072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069717Jy sigma=0.000685 ! Fit after self-cal, rms=0.069719Jy sigma=0.000685 ! Inverting map ! Added new window around map position (-11, 38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118354 Jy ! Component: 100 - total flux cleaned = 0.000821231 Jy ! Component: 150 - total flux cleaned = 0.000518485 Jy ! Component: 200 - total flux cleaned = 0.000427104 Jy ! Total flux subtracted in 200 components = 0.000427104 Jy ! Clean residual min=-0.003978 max=0.004219 Jy/beam ! Clean residual mean=0.000000 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.426499 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.426499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069121Jy sigma=0.000680 ! Fit after self-cal, rms=0.069127Jy sigma=0.000680 ! Inverting map ! Added new window around map position (-39, 36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320894 Jy ! Component: 100 - total flux cleaned = 0.00321719 Jy ! Component: 150 - total flux cleaned = 0.00297214 Jy ! Component: 200 - total flux cleaned = 0.00304909 Jy ! Total flux subtracted in 200 components = 0.00304909 Jy ! Clean residual min=-0.003950 max=0.003556 Jy/beam ! Clean residual mean=0.000000 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 0.429548 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 0.429548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068717Jy sigma=0.000677 ! Fit after self-cal, rms=0.068721Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068721Jy sigma=0.000676 ! Fit after self-cal, rms=0.068326Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=8.486 mas, bpa=-5.919 degrees ! Estimated noise=1133.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182142 Jy ! Component: 100 - total flux cleaned = 0.00225182 Jy ! Component: 150 - total flux cleaned = 0.00248704 Jy ! Component: 200 - total flux cleaned = 0.00276198 Jy ! Total flux subtracted in 200 components = 0.00276198 Jy ! Clean residual min=-0.002828 max=0.003304 Jy/beam ! Clean residual mean=0.000001 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.43231 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 0.43231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068057Jy sigma=0.000661 ! Fit after self-cal, rms=0.068088Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126789 Jy ! Component: 100 - total flux cleaned = -6.37293e-05 Jy ! Component: 150 - total flux cleaned = -0.000182636 Jy ! Component: 200 - total flux cleaned = -0.000240975 Jy ! Total flux subtracted in 200 components = -0.000240975 Jy ! Clean residual min=-0.002817 max=0.003185 Jy/beam ! Clean residual mean=0.000001 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.432069 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 167 components and 0.432069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067950Jy sigma=0.000660 ! Fit after self-cal, rms=0.067956Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067956Jy sigma=0.000660 ! Fit after self-cal, rms=0.068074Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.062 mas, bmaj=15.93 mas, bpa=-2.642 degrees ! Estimated noise=1309.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185638 Jy ! Component: 100 - total flux cleaned = 0.00209897 Jy ! Component: 150 - total flux cleaned = 0.00231246 Jy ! Component: 200 - total flux cleaned = 0.00236035 Jy ! Total flux subtracted in 200 components = 0.00236035 Jy ! Clean residual min=-0.002578 max=0.002817 Jy/beam ! Clean residual mean=0.000005 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.434429 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 190 components and 0.434429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068034Jy sigma=0.000658 ! Fit after self-cal, rms=0.068024Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052105 Jy ! Component: 100 - total flux cleaned = 0.000564819 Jy ! Component: 150 - total flux cleaned = 0.000564211 Jy ! Component: 200 - total flux cleaned = 0.000605506 Jy ! Total flux subtracted in 200 components = 0.000605506 Jy ! Clean residual min=-0.002535 max=0.002670 Jy/beam ! Clean residual mean=0.000006 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.435035 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 205 components and 0.435035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068010Jy sigma=0.000658 ! Fit after self-cal, rms=0.068005Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=8.472 mas, bpa=-5.864 degrees ! Estimated noise=1135.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 8.472 at -5.864 degrees (North through East) ! Clean map min=-0.0074284 max=0.46243 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=7.377 mas, bpa=-7.897 degrees ! Estimated noise=1411.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34634 Jy ! Component: 100 - total flux cleaned = 0.4287 Jy ! Component: 150 - total flux cleaned = 0.437261 Jy ! Component: 200 - total flux cleaned = 0.435117 Jy ! Total flux subtracted in 200 components = 0.435117 Jy ! Clean residual min=-0.015197 max=0.015682 Jy/beam ! Clean residual mean=0.000001 rms=0.002529 Jy/beam ! Combined flux in latest and established models = 0.435117 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.435117 Jy ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=8.472 mas, bpa=-5.864 degrees ! Estimated noise=1135.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00372918 Jy ! Component: 100 - total flux cleaned = -0.00480844 Jy ! Component: 150 - total flux cleaned = -0.00483924 Jy ! Component: 200 - total flux cleaned = -0.00315457 Jy ! Total flux subtracted in 200 components = -0.00315457 Jy ! Clean residual min=-0.008050 max=0.006567 Jy/beam ! Clean residual mean=0.000004 rms=0.001442 Jy/beam ! Combined flux in latest and established models = 0.431962 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.431962 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.062 mas, bmaj=15.93 mas, bpa=-2.642 degrees ! Estimated noise=1309.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431745 Jy ! Component: 100 - total flux cleaned = 0.00702848 Jy ! Component: 150 - total flux cleaned = 0.00894873 Jy ! Component: 200 - total flux cleaned = 0.00984392 Jy ! Total flux subtracted in 200 components = 0.00984392 Jy ! Clean residual min=-0.003829 max=0.004431 Jy/beam ! Clean residual mean=0.000006 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.441806 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439942 Jy ! Component: 100 - total flux cleaned = 0.000641051 Jy ! Component: 150 - total flux cleaned = 0.000733661 Jy ! Component: 200 - total flux cleaned = 0.00064733 Jy ! Total flux subtracted in 200 components = 0.00064733 Jy ! Clean residual min=-0.003399 max=0.003959 Jy/beam ! Clean residual mean=0.000006 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.442454 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 71 components and 0.442454 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=8.472 mas, bpa=-5.864 degrees ! Estimated noise=1135.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832225 Jy ! Component: 100 - total flux cleaned = 6.69698e-05 Jy ! Component: 150 - total flux cleaned = 0.00047458 Jy ! Component: 200 - total flux cleaned = 0.000659227 Jy ! Total flux subtracted in 200 components = 0.000659227 Jy ! Clean residual min=-0.004970 max=0.003981 Jy/beam ! Clean residual mean=0.000003 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.443113 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.443113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070735Jy sigma=0.000681 ! Fit after self-cal, rms=0.070735Jy sigma=0.000681 wmodel J2129-1538_S_2017_05_01_pus_map.mod ! Writing 76 model components to file: J2129-1538_S_2017_05_01_pus_map.mod wobs J2129-1538_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_05_01_pus_uvs.fits wwins J2129-1538_S_2017_05_01_pus_map.win ! wwins: Wrote 6 windows to J2129-1538_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158196 Jy ! Component: 100 - total flux cleaned = -0.00144313 Jy ! Component: 150 - total flux cleaned = -0.0011052 Jy ! Component: 200 - total flux cleaned = -0.000844558 Jy ! Component: 250 - total flux cleaned = -0.000593533 Jy ! Component: 300 - total flux cleaned = -0.000289056 Jy ! Component: 350 - total flux cleaned = -0.000112709 Jy ! Component: 400 - total flux cleaned = -0.000229192 Jy ! Component: 450 - total flux cleaned = 7.39656e-08 Jy ! Component: 500 - total flux cleaned = -5.54729e-05 Jy ! Component: 550 - total flux cleaned = 0.000217402 Jy ! Component: 600 - total flux cleaned = 0.000161715 Jy ! Component: 650 - total flux cleaned = 0.000214369 Jy ! Component: 700 - total flux cleaned = 0.000214256 Jy ! Component: 750 - total flux cleaned = 0.000265279 Jy ! Component: 800 - total flux cleaned = 0.00031445 Jy ! Component: 850 - total flux cleaned = 0.000165247 Jy ! Component: 900 - total flux cleaned = 6.90129e-05 Jy ! Component: 950 - total flux cleaned = 0.000165096 Jy ! Component: 1000 - total flux cleaned = 0.000164314 Jy ! Component: 1050 - total flux cleaned = 0.000209046 Jy ! Component: 1100 - total flux cleaned = 2.50415e-05 Jy ! Component: 1150 - total flux cleaned = -0.000111037 Jy ! Component: 1200 - total flux cleaned = -2.20069e-05 Jy ! Component: 1250 - total flux cleaned = -6.71276e-05 Jy ! Component: 1300 - total flux cleaned = -0.000197975 Jy ! Component: 1350 - total flux cleaned = -0.000112385 Jy ! Component: 1400 - total flux cleaned = -0.000196711 Jy ! Component: 1450 - total flux cleaned = -7.18193e-05 Jy ! Component: 1500 - total flux cleaned = -0.000154877 Jy ! Component: 1550 - total flux cleaned = -0.000236775 Jy ! Component: 1600 - total flux cleaned = -0.000196668 Jy ! Component: 1650 - total flux cleaned = -0.000157244 Jy ! Component: 1700 - total flux cleaned = -0.00015811 Jy ! Component: 1750 - total flux cleaned = -0.00019748 Jy ! Component: 1800 - total flux cleaned = -0.000196797 Jy ! Component: 1850 - total flux cleaned = -0.00023482 Jy ! Component: 1900 - total flux cleaned = -0.000197559 Jy ! Component: 1950 - total flux cleaned = -0.000235227 Jy ! Component: 2000 - total flux cleaned = -0.000381923 Jy ! Component: 2050 - total flux cleaned = -0.00049067 Jy ! Component: 2100 - total flux cleaned = -0.0004906 Jy ! Component: 2150 - total flux cleaned = -0.000668589 Jy ! Component: 2200 - total flux cleaned = -0.000774216 Jy ! Component: 2250 - total flux cleaned = -0.000774414 Jy ! Component: 2300 - total flux cleaned = -0.00101623 Jy ! Component: 2350 - total flux cleaned = -0.00108443 Jy ! Component: 2400 - total flux cleaned = -0.00105105 Jy ! Component: 2450 - total flux cleaned = -0.00115192 Jy ! Component: 2500 - total flux cleaned = -0.00125189 Jy ! Component: 2550 - total flux cleaned = -0.00138376 Jy ! Component: 2600 - total flux cleaned = -0.00157949 Jy ! Component: 2650 - total flux cleaned = -0.00161198 Jy ! Component: 2700 - total flux cleaned = -0.00177186 Jy ! Component: 2750 - total flux cleaned = -0.00180397 Jy ! Component: 2800 - total flux cleaned = -0.00183576 Jy ! Component: 2850 - total flux cleaned = -0.00205339 Jy ! Component: 2900 - total flux cleaned = -0.00217648 Jy ! Component: 2950 - total flux cleaned = -0.00214554 Jy ! Component: 3000 - total flux cleaned = -0.00205492 Jy ! Component: 3050 - total flux cleaned = -0.00223544 Jy ! Component: 3100 - total flux cleaned = -0.00232515 Jy ! Component: 3150 - total flux cleaned = -0.00235488 Jy ! Component: 3200 - total flux cleaned = -0.00238411 Jy ! Component: 3250 - total flux cleaned = -0.00235513 Jy ! Component: 3300 - total flux cleaned = -0.00238373 Jy ! Component: 3350 - total flux cleaned = -0.00255551 Jy ! Component: 3400 - total flux cleaned = -0.0025553 Jy ! Component: 3450 - total flux cleaned = -0.00261198 Jy ! Component: 3500 - total flux cleaned = -0.00266821 Jy ! Component: 3550 - total flux cleaned = -0.00272397 Jy ! Component: 3600 - total flux cleaned = -0.00275167 Jy ! Component: 3650 - total flux cleaned = -0.00283376 Jy ! Component: 3700 - total flux cleaned = -0.00283387 Jy ! Component: 3750 - total flux cleaned = -0.00294216 Jy ! Component: 3800 - total flux cleaned = -0.00302246 Jy ! Component: 3850 - total flux cleaned = -0.00310235 Jy ! Component: 3900 - total flux cleaned = -0.00315525 Jy ! Component: 3950 - total flux cleaned = -0.00310272 Jy ! Component: 4000 - total flux cleaned = -0.00325923 Jy ! Component: 4050 - total flux cleaned = -0.00336269 Jy ! Total flux subtracted in 4096 components = -0.00343986 Jy ! Clean residual min=-0.001308 max=0.001692 Jy/beam ! Clean residual mean=0.000001 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.439673 Jy keep ! Adding 267 model components to the UV plane model. ! The established model now contains 338 components and 0.439673 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 8.472 at -5.864 degrees (North through East) ! Clean map min=-0.0050305 max=0.45346 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.453458 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000453397 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.29996 0.29996 0.599919 1.19984 2.39968 4.79935 9.59871 19.1974 38.3948 76.7897 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.453 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.428 x 8.472 at -5.864 degrees (North through East) ! Clean map min=-0.0050305 max=0.45346 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:44:33 2019