! Started logfile: J2129-1538_S_2017_02_19_pus_uvs.log on Sat May 4 18:58:54 2019 obs J2129-1538_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_02_19_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.705556 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.368738Jy sigma=0.002700 ! Fit after self-cal, rms=0.345463Jy sigma=0.002542 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=6.653 mas, bpa=-8.104 degrees ! Estimated noise=4057.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.523057 Jy ! Component: 100 - total flux cleaned = 0.653637 Jy ! Total flux subtracted in 100 components = 0.653637 Jy ! Clean residual min=-0.028999 max=0.052956 Jy/beam ! Clean residual mean=0.000127 rms=0.008894 Jy/beam ! Combined flux in latest and established models = 0.653637 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.653637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162437Jy sigma=0.001021 ! Fit after self-cal, rms=0.162428Jy sigma=0.001021 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=7.363 mas, bpa=-6.269 degrees ! Estimated noise=3383.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570572 Jy ! Component: 100 - total flux cleaned = 0.0814592 Jy ! Component: 150 - total flux cleaned = 0.0940976 Jy ! Component: 200 - total flux cleaned = 0.101387 Jy ! Total flux subtracted in 200 components = 0.101387 Jy ! Clean residual min=-0.024358 max=0.018057 Jy/beam ! Clean residual mean=-0.000024 rms=0.005521 Jy/beam ! Combined flux in latest and established models = 0.755024 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 0.755024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138892Jy sigma=0.000898 ! Fit after self-cal, rms=0.138888Jy sigma=0.000898 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 HN 1.01 KP 1.04 ! LA 1.00 MK 1.00 NL 0.87 OV 1.07 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.07 HN 1.04 KP 1.00 ! LA 1.00 MK 0.97 NL 1.01 OV 1.05 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.04 HN 0.98 KP 0.85 ! LA 0.76 MK 1.01 NL 1.11 OV 1.01 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.08 HN 0.94 KP 1.00* ! LA 0.78 MK 1.14 NL 1.00* OV 1.05 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.138888Jy sigma=0.000898 ! Fit after self-cal, rms=0.098135Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=7.396 mas, bpa=-6.049 degrees ! Estimated noise=3379.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860075 Jy ! Component: 100 - total flux cleaned = 0.000857073 Jy ! Component: 150 - total flux cleaned = 0.000786321 Jy ! Component: 200 - total flux cleaned = 0.000661725 Jy ! Total flux subtracted in 200 components = 0.000661725 Jy ! Clean residual min=-0.009676 max=0.008384 Jy/beam ! Clean residual mean=-0.000014 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 0.755686 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.755686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098023Jy sigma=0.000681 ! Fit after self-cal, rms=0.098004Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098004Jy sigma=0.000680 ! Fit after self-cal, rms=0.098056Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=7.394 mas, bpa=-6.027 degrees ! Estimated noise=3380.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000626937 Jy ! Component: 100 - total flux cleaned = 0.000629692 Jy ! Component: 150 - total flux cleaned = 0.000582433 Jy ! Component: 200 - total flux cleaned = 0.000538684 Jy ! Total flux subtracted in 200 components = 0.000538684 Jy ! Clean residual min=-0.009720 max=0.008315 Jy/beam ! Clean residual mean=-0.000014 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.756224 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.756224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098001Jy sigma=0.000680 ! Fit after self-cal, rms=0.097999Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148136 Jy ! Component: 100 - total flux cleaned = -0.000145256 Jy ! Component: 150 - total flux cleaned = -0.000178363 Jy ! Component: 200 - total flux cleaned = -0.000240362 Jy ! Total flux subtracted in 200 components = -0.000240362 Jy ! Clean residual min=-0.009714 max=0.008209 Jy/beam ! Clean residual mean=-0.000014 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.755984 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.755984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097976Jy sigma=0.000680 ! Fit after self-cal, rms=0.097975Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097975Jy sigma=0.000680 ! Fit after self-cal, rms=0.098010Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=7.393 mas, bpa=-6.005 degrees ! Estimated noise=3380.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000270541 Jy ! Component: 100 - total flux cleaned = 0.000303073 Jy ! Component: 150 - total flux cleaned = 0.000275391 Jy ! Component: 200 - total flux cleaned = 0.000250592 Jy ! Total flux subtracted in 200 components = 0.000250592 Jy ! Clean residual min=-0.009662 max=0.008221 Jy/beam ! Clean residual mean=-0.000014 rms=0.002140 Jy/beam ! Combined flux in latest and established models = 0.756235 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.756235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097990Jy sigma=0.000680 ! Fit after self-cal, rms=0.097990Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.45565e-05 Jy ! Component: 100 - total flux cleaned = -4.01246e-05 Jy ! Component: 150 - total flux cleaned = -6.27653e-05 Jy ! Component: 200 - total flux cleaned = -8.33219e-05 Jy ! Total flux subtracted in 200 components = -8.33219e-05 Jy ! Clean residual min=-0.009660 max=0.008222 Jy/beam ! Clean residual mean=-0.000014 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.756151 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.756151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097981Jy sigma=0.000680 ! Fit after self-cal, rms=0.097981Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097981Jy sigma=0.000680 ! Fit after self-cal, rms=0.098016Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.808 mas, bmaj=13.41 mas, bpa=-1.387 degrees ! Estimated noise=4723.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475061 Jy ! Component: 100 - total flux cleaned = 0.000329669 Jy ! Component: 150 - total flux cleaned = 0.000201189 Jy ! Component: 200 - total flux cleaned = 0.000160936 Jy ! Total flux subtracted in 200 components = 0.000160936 Jy ! Clean residual min=-0.012045 max=0.009980 Jy/beam ! Clean residual mean=-0.000032 rms=0.003185 Jy/beam ! Combined flux in latest and established models = 0.756312 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.756312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098021Jy sigma=0.000680 ! Fit after self-cal, rms=0.098016Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137296 Jy ! Component: 100 - total flux cleaned = -0.000210742 Jy ! Component: 150 - total flux cleaned = -0.00028175 Jy ! Component: 200 - total flux cleaned = -0.000347521 Jy ! Total flux subtracted in 200 components = -0.000347521 Jy ! Clean residual min=-0.012064 max=0.010048 Jy/beam ! Clean residual mean=-0.000032 rms=0.003168 Jy/beam ! Combined flux in latest and established models = 0.755965 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 51 components and 0.755965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098035Jy sigma=0.000680 ! Fit after self-cal, rms=0.098032Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.809 mas, bmaj=7.392 mas, bpa=-5.98 degrees ! Estimated noise=3380.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.809 x 7.392 at -5.98 degrees (North through East) ! Clean map min=-0.0091464 max=0.67794 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098032Jy sigma=0.000680 ! Fit after self-cal, rms=0.089943Jy sigma=0.000619 ! Inverting map and beam ! Estimated beam: bmin=2.806 mas, bmaj=7.389 mas, bpa=-6.005 degrees ! Estimated noise=3378.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00013698 Jy ! Component: 100 - total flux cleaned = -7.21252e-05 Jy ! Component: 150 - total flux cleaned = -1.39621e-05 Jy ! Component: 200 - total flux cleaned = 1.22765e-05 Jy ! Total flux subtracted in 200 components = 1.22765e-05 Jy ! Clean residual min=-0.009898 max=0.007859 Jy/beam ! Clean residual mean=-0.000009 rms=0.002123 Jy/beam ! Combined flux in latest and established models = 0.755977 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.755977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089923Jy sigma=0.000619 ! Fit after self-cal, rms=0.089921Jy sigma=0.000619 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.27767e-05 Jy ! Component: 100 - total flux cleaned = -6.94991e-06 Jy ! Component: 150 - total flux cleaned = 1.41507e-05 Jy ! Component: 200 - total flux cleaned = 3.43011e-05 Jy ! Total flux subtracted in 200 components = 3.43011e-05 Jy ! Clean residual min=-0.009929 max=0.007869 Jy/beam ! Clean residual mean=-0.000009 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.756011 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.756011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089911Jy sigma=0.000619 ! Fit after self-cal, rms=0.089910Jy sigma=0.000619 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089910Jy sigma=0.000619 ! Fit after self-cal, rms=0.089947Jy sigma=0.000619 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.459 mas, bmaj=6.682 mas, bpa=-7.809 degrees ! Estimated noise=4033.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.519945 Jy ! Component: 100 - total flux cleaned = 0.646299 Jy ! Component: 150 - total flux cleaned = 0.697111 Jy ! Component: 200 - total flux cleaned = 0.720529 Jy ! Total flux subtracted in 200 components = 0.720529 Jy ! Clean residual min=-0.013350 max=0.011907 Jy/beam ! Clean residual mean=0.000025 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 0.720529 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.720529 Jy ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=7.389 mas, bpa=-5.976 degrees ! Estimated noise=3379.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164949 Jy ! Component: 100 - total flux cleaned = 0.0250061 Jy ! Component: 150 - total flux cleaned = 0.0295815 Jy ! Component: 200 - total flux cleaned = 0.0321381 Jy ! Total flux subtracted in 200 components = 0.0321381 Jy ! Clean residual min=-0.009620 max=0.007597 Jy/beam ! Clean residual mean=-0.000006 rms=0.002136 Jy/beam ! Combined flux in latest and established models = 0.752667 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.752667 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.808 mas, bmaj=13.42 mas, bpa=-1.415 degrees ! Estimated noise=4724.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269126 Jy ! Component: 100 - total flux cleaned = 0.00278598 Jy ! Component: 150 - total flux cleaned = 0.00274784 Jy ! Component: 200 - total flux cleaned = 0.00271117 Jy ! Total flux subtracted in 200 components = 0.00271117 Jy ! Clean residual min=-0.011894 max=0.009951 Jy/beam ! Clean residual mean=-0.000021 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 0.755378 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64415e-05 Jy ! Component: 100 - total flux cleaned = -7.03481e-05 Jy ! Component: 150 - total flux cleaned = -0.000104374 Jy ! Component: 200 - total flux cleaned = -0.000163508 Jy ! Total flux subtracted in 200 components = -0.000163508 Jy ! Clean residual min=-0.011927 max=0.009994 Jy/beam ! Clean residual mean=-0.000021 rms=0.003171 Jy/beam ! Combined flux in latest and established models = 0.755215 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.755215 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.807 mas, bmaj=7.389 mas, bpa=-5.976 degrees ! Estimated noise=3379.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010066 Jy ! Component: 100 - total flux cleaned = 0.000297955 Jy ! Component: 150 - total flux cleaned = 0.000331688 Jy ! Component: 200 - total flux cleaned = 0.000360788 Jy ! Total flux subtracted in 200 components = 0.000360788 Jy ! Clean residual min=-0.009509 max=0.007824 Jy/beam ! Clean residual mean=-0.000009 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.755575 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.755575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090000Jy sigma=0.000619 ! Fit after self-cal, rms=0.089995Jy sigma=0.000619 wmodel J2129-1538_S_2017_02_19_pus_map.mod ! Writing 53 model components to file: J2129-1538_S_2017_02_19_pus_map.mod wobs J2129-1538_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_02_19_pus_uvs.fits wwins J2129-1538_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J2129-1538_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0042033 Jy ! Component: 100 - total flux cleaned = -0.00680848 Jy ! Component: 150 - total flux cleaned = -0.00774282 Jy ! Component: 200 - total flux cleaned = -0.00861854 Jy ! Component: 250 - total flux cleaned = -0.00908314 Jy ! Component: 300 - total flux cleaned = -0.00941647 Jy ! Component: 350 - total flux cleaned = -0.00994681 Jy ! Component: 400 - total flux cleaned = -0.010353 Jy ! Component: 450 - total flux cleaned = -0.0110282 Jy ! Component: 500 - total flux cleaned = -0.0113972 Jy ! Component: 550 - total flux cleaned = -0.0116634 Jy ! Component: 600 - total flux cleaned = -0.0120038 Jy ! Component: 650 - total flux cleaned = -0.0121675 Jy ! Component: 700 - total flux cleaned = -0.0124047 Jy ! Component: 750 - total flux cleaned = -0.0124795 Jy ! Component: 800 - total flux cleaned = -0.0127027 Jy ! Component: 850 - total flux cleaned = -0.0127735 Jy ! Component: 900 - total flux cleaned = -0.0129803 Jy ! Component: 950 - total flux cleaned = -0.013115 Jy ! Component: 1000 - total flux cleaned = -0.0134443 Jy ! Component: 1050 - total flux cleaned = -0.0137633 Jy ! Component: 1100 - total flux cleaned = -0.0141362 Jy ! Component: 1150 - total flux cleaned = -0.0144999 Jy ! Component: 1200 - total flux cleaned = -0.0147966 Jy ! Component: 1250 - total flux cleaned = -0.0150846 Jy ! Component: 1300 - total flux cleaned = -0.0153664 Jy ! Component: 1350 - total flux cleaned = -0.0156951 Jy ! Component: 1400 - total flux cleaned = -0.0159634 Jy ! Component: 1450 - total flux cleaned = -0.0161734 Jy ! Component: 1500 - total flux cleaned = -0.0163796 Jy ! Component: 1550 - total flux cleaned = -0.0166325 Jy ! Component: 1600 - total flux cleaned = -0.0167336 Jy ! Component: 1650 - total flux cleaned = -0.0170285 Jy ! Component: 1700 - total flux cleaned = -0.0171729 Jy ! Component: 1750 - total flux cleaned = -0.0172201 Jy ! Component: 1800 - total flux cleaned = -0.0172672 Jy ! Component: 1850 - total flux cleaned = -0.0172212 Jy ! Component: 1900 - total flux cleaned = -0.0172676 Jy ! Component: 1950 - total flux cleaned = -0.0173561 Jy ! Component: 2000 - total flux cleaned = -0.0171332 Jy ! Component: 2050 - total flux cleaned = -0.0170461 Jy ! Component: 2100 - total flux cleaned = -0.0171754 Jy ! Component: 2150 - total flux cleaned = -0.0170042 Jy ! Component: 2200 - total flux cleaned = -0.0170039 Jy ! Component: 2250 - total flux cleaned = -0.0170453 Jy ! Component: 2300 - total flux cleaned = -0.0168387 Jy ! Component: 2350 - total flux cleaned = -0.0168799 Jy ! Component: 2400 - total flux cleaned = -0.0167989 Jy ! Component: 2450 - total flux cleaned = -0.0166787 Jy ! Component: 2500 - total flux cleaned = -0.0166393 Jy ! Component: 2550 - total flux cleaned = -0.0166787 Jy ! Component: 2600 - total flux cleaned = -0.016561 Jy ! Component: 2650 - total flux cleaned = -0.0165611 Jy ! Component: 2700 - total flux cleaned = -0.0164843 Jy ! Component: 2750 - total flux cleaned = -0.0164844 Jy ! Component: 2800 - total flux cleaned = -0.0164843 Jy ! Component: 2850 - total flux cleaned = -0.0163709 Jy ! Component: 2900 - total flux cleaned = -0.0164082 Jy ! Component: 2950 - total flux cleaned = -0.016259 Jy ! Component: 3000 - total flux cleaned = -0.0161477 Jy ! Component: 3050 - total flux cleaned = -0.0161105 Jy ! Component: 3100 - total flux cleaned = -0.0160002 Jy ! Component: 3150 - total flux cleaned = -0.0159636 Jy ! Component: 3200 - total flux cleaned = -0.0159634 Jy ! Component: 3250 - total flux cleaned = -0.0159272 Jy ! Component: 3300 - total flux cleaned = -0.015745 Jy ! Component: 3350 - total flux cleaned = -0.0156722 Jy ! Component: 3400 - total flux cleaned = -0.0156357 Jy ! Component: 3450 - total flux cleaned = -0.0155627 Jy ! Component: 3500 - total flux cleaned = -0.0155264 Jy ! Component: 3550 - total flux cleaned = -0.0153804 Jy ! Component: 3600 - total flux cleaned = -0.0153442 Jy ! Component: 3650 - total flux cleaned = -0.0152711 Jy ! Component: 3700 - total flux cleaned = -0.0151245 Jy ! Component: 3750 - total flux cleaned = -0.0150877 Jy ! Component: 3800 - total flux cleaned = -0.0150509 Jy ! Component: 3850 - total flux cleaned = -0.0149771 Jy ! Component: 3900 - total flux cleaned = -0.0149029 Jy ! Component: 3950 - total flux cleaned = -0.0148285 Jy ! Component: 4000 - total flux cleaned = -0.014754 Jy ! Component: 4050 - total flux cleaned = -0.0146415 Jy ! Total flux subtracted in 4096 components = -0.0146792 Jy ! Clean residual min=-0.002586 max=0.003018 Jy/beam ! Clean residual mean=0.000008 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.740896 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 297 components and 0.740896 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.807 x 7.389 at -5.976 degrees (North through East) ! Clean map min=-0.0060363 max=0.67892 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.678918 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00058984 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.260638 0.260638 0.521276 1.04255 2.08511 4.17021 8.34042 16.6808 33.3617 66.7234 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.678 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.807 x 7.389 at -5.976 degrees (North through East) ! Clean map min=-0.0060363 max=0.67892 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:58:59 2019