! Started logfile: J2129-1538_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:22:40 2019 obs J2129-1538_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J2129-1538_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672222 visibilities/baseline/integration-bin. ! Found source: J2129-1538 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2129-1538_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.484256Jy sigma=0.002332 ! Fit after self-cal, rms=0.467225Jy sigma=0.002194 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=11.75 mas, bpa=24.44 degrees ! Estimated noise=3363.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.551144 Jy ! Component: 100 - total flux cleaned = 0.675238 Jy ! Total flux subtracted in 100 components = 0.675238 Jy ! Clean residual min=-0.033322 max=0.043406 Jy/beam ! Clean residual mean=-0.000011 rms=0.008084 Jy/beam ! Combined flux in latest and established models = 0.675238 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.675238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.430323Jy sigma=0.001189 ! Fit after self-cal, rms=0.430320Jy sigma=0.001189 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.996 mas, bmaj=13.84 mas, bpa=24.24 degrees ! Estimated noise=2644.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0616981 Jy ! Component: 100 - total flux cleaned = 0.0983314 Jy ! Component: 150 - total flux cleaned = 0.122866 Jy ! Component: 200 - total flux cleaned = 0.139612 Jy ! Total flux subtracted in 200 components = 0.139612 Jy ! Clean residual min=-0.033873 max=0.028737 Jy/beam ! Clean residual mean=-0.000025 rms=0.007707 Jy/beam ! Combined flux in latest and established models = 0.81485 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 35 components and 0.81485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.407444Jy sigma=0.001096 ! Fit after self-cal, rms=0.407474Jy sigma=0.001096 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.83 HN 1.00 KP 1.02 ! LA 1.03 MK 1.00* NL 0.95 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.08 HN 1.06 KP 1.01 ! LA 0.99 MK 1.00* NL 1.14 OV 1.04 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.94 HN 1.03 KP 1.05 ! LA 1.05 MK 1.00* NL 0.99 OV 0.96 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 1.01 KP 0.96 ! LA 0.91 MK 1.00* NL 1.00* OV 0.96 ! PT 0.96 SC 1.16 ! ! ! Fit before self-cal, rms=0.407474Jy sigma=0.001096 ! Fit after self-cal, rms=0.347953Jy sigma=0.001015 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.044 mas, bmaj=13.91 mas, bpa=24.02 degrees ! Estimated noise=2711.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137015 Jy ! Component: 100 - total flux cleaned = 0.0143076 Jy ! Component: 150 - total flux cleaned = 0.0145479 Jy ! Component: 200 - total flux cleaned = 0.0145551 Jy ! Total flux subtracted in 200 components = 0.0145551 Jy ! Clean residual min=-0.033558 max=0.024909 Jy/beam ! Clean residual mean=-0.000009 rms=0.007340 Jy/beam ! Combined flux in latest and established models = 0.829405 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 48 components and 0.829405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345067Jy sigma=0.001018 ! Fit after self-cal, rms=0.345095Jy sigma=0.001018 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345095Jy sigma=0.001018 ! Fit after self-cal, rms=0.286624Jy sigma=0.000868 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.04 mas, bmaj=13.8 mas, bpa=23.8 degrees ! Estimated noise=2791.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189643 Jy ! Component: 100 - total flux cleaned = 0.0256152 Jy ! Component: 150 - total flux cleaned = 0.0274436 Jy ! Component: 200 - total flux cleaned = 0.0280411 Jy ! Total flux subtracted in 200 components = 0.0280411 Jy ! Clean residual min=-0.022558 max=0.016312 Jy/beam ! Clean residual mean=-0.000015 rms=0.005110 Jy/beam ! Combined flux in latest and established models = 0.857446 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 0.857446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282524Jy sigma=0.000867 ! Fit after self-cal, rms=0.282658Jy sigma=0.000867 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865459 Jy ! Component: 100 - total flux cleaned = 0.00145216 Jy ! Component: 150 - total flux cleaned = 0.00197713 Jy ! Component: 200 - total flux cleaned = 0.00235685 Jy ! Total flux subtracted in 200 components = 0.00235685 Jy ! Clean residual min=-0.022807 max=0.016382 Jy/beam ! Clean residual mean=-0.000014 rms=0.005099 Jy/beam ! Combined flux in latest and established models = 0.859803 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.859803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282372Jy sigma=0.000867 ! Fit after self-cal, rms=0.282400Jy sigma=0.000867 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.282400Jy sigma=0.000867 ! Fit after self-cal, rms=0.140074Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.052 mas, bmaj=13.85 mas, bpa=23.88 degrees ! Estimated noise=2790.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00637848 Jy ! Component: 100 - total flux cleaned = -0.00787632 Jy ! Component: 150 - total flux cleaned = -0.00880895 Jy ! Component: 200 - total flux cleaned = -0.00971631 Jy ! Total flux subtracted in 200 components = -0.00971631 Jy ! Clean residual min=-0.007553 max=0.010343 Jy/beam ! Clean residual mean=-0.000006 rms=0.002205 Jy/beam ! Combined flux in latest and established models = 0.850087 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.850087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139685Jy sigma=0.000657 ! Fit after self-cal, rms=0.139581Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00796929 Jy ! Component: 100 - total flux cleaned = 0.00976325 Jy ! Component: 150 - total flux cleaned = 0.0112322 Jy ! Component: 200 - total flux cleaned = 0.0121791 Jy ! Total flux subtracted in 200 components = 0.0121791 Jy ! Clean residual min=-0.007072 max=0.007593 Jy/beam ! Clean residual mean=-0.000007 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.862266 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 109 components and 0.862266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138866Jy sigma=0.000651 ! Fit after self-cal, rms=0.138828Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138828Jy sigma=0.000651 ! Fit after self-cal, rms=0.138865Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.085 mas, bmaj=18.36 mas, bpa=15.82 degrees ! Estimated noise=3134.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339137 Jy ! Component: 100 - total flux cleaned = 0.000450424 Jy ! Component: 150 - total flux cleaned = 0.000455806 Jy ! Component: 200 - total flux cleaned = 0.000462345 Jy ! Total flux subtracted in 200 components = 0.000462345 Jy ! Clean residual min=-0.006923 max=0.007649 Jy/beam ! Clean residual mean=-0.000010 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.862728 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 134 components and 0.862728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138759Jy sigma=0.000649 ! Fit after self-cal, rms=0.138730Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521487 Jy ! Component: 100 - total flux cleaned = 0.000591487 Jy ! Component: 150 - total flux cleaned = 0.000593404 Jy ! Component: 200 - total flux cleaned = 0.000657561 Jy ! Total flux subtracted in 200 components = 0.000657561 Jy ! Clean residual min=-0.006872 max=0.007147 Jy/beam ! Clean residual mean=-0.000010 rms=0.002002 Jy/beam ! Combined flux in latest and established models = 0.863386 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 148 components and 0.863386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138705Jy sigma=0.000648 ! Fit after self-cal, rms=0.138687Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.054 mas, bmaj=13.88 mas, bpa=23.93 degrees ! Estimated noise=2785.25 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.054 x 13.88 at 23.93 degrees (North through East) ! Clean map min=-0.0063776 max=0.74824 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138687Jy sigma=0.000648 ! Fit after self-cal, rms=0.131989Jy sigma=0.000596 ! Inverting map and beam ! Estimated beam: bmin=4.057 mas, bmaj=13.9 mas, bpa=23.95 degrees ! Estimated noise=2781.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123411 Jy ! Component: 100 - total flux cleaned = -0.00144984 Jy ! Component: 150 - total flux cleaned = -0.00164455 Jy ! Component: 200 - total flux cleaned = -0.00199509 Jy ! Total flux subtracted in 200 components = -0.00199509 Jy ! Clean residual min=-0.006110 max=0.006716 Jy/beam ! Clean residual mean=-0.000007 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.861391 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 174 components and 0.861391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131773Jy sigma=0.000595 ! Fit after self-cal, rms=0.131774Jy sigma=0.000595 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257745 Jy ! Component: 100 - total flux cleaned = -0.000334607 Jy ! Component: 150 - total flux cleaned = -0.000627454 Jy ! Component: 200 - total flux cleaned = -0.000834665 Jy ! Total flux subtracted in 200 components = -0.000834665 Jy ! Clean residual min=-0.006152 max=0.006631 Jy/beam ! Clean residual mean=-0.000008 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 0.860556 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 185 components and 0.860556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131674Jy sigma=0.000594 ! Fit after self-cal, rms=0.131674Jy sigma=0.000594 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131674Jy sigma=0.000594 ! Fit after self-cal, rms=0.131603Jy sigma=0.000594 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=11.72 mas, bpa=24.09 degrees ! Estimated noise=3555.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.582485 Jy ! Component: 100 - total flux cleaned = 0.710756 Jy ! Component: 150 - total flux cleaned = 0.752727 Jy ! Component: 200 - total flux cleaned = 0.774534 Jy ! Total flux subtracted in 200 components = 0.774534 Jy ! Clean residual min=-0.011577 max=0.013152 Jy/beam ! Clean residual mean=-0.000003 rms=0.002859 Jy/beam ! Combined flux in latest and established models = 0.774534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.774534 Jy ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=13.92 mas, bpa=23.97 degrees ! Estimated noise=2777.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0207938 Jy ! Component: 100 - total flux cleaned = 0.0341466 Jy ! Component: 150 - total flux cleaned = 0.0438768 Jy ! Component: 200 - total flux cleaned = 0.051271 Jy ! Total flux subtracted in 200 components = 0.051271 Jy ! Clean residual min=-0.007220 max=0.008755 Jy/beam ! Clean residual mean=-0.000012 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.825805 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 55 components and 0.825805 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.095 mas, bmaj=18.4 mas, bpa=15.89 degrees ! Estimated noise=3120.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00792095 Jy ! Component: 100 - total flux cleaned = 0.0133296 Jy ! Component: 150 - total flux cleaned = 0.0174451 Jy ! Component: 200 - total flux cleaned = 0.019941 Jy ! Total flux subtracted in 200 components = 0.019941 Jy ! Clean residual min=-0.006761 max=0.007303 Jy/beam ! Clean residual mean=-0.000015 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.845746 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154412 Jy ! Component: 100 - total flux cleaned = 0.0029697 Jy ! Component: 150 - total flux cleaned = 0.00404194 Jy ! Component: 200 - total flux cleaned = 0.0049837 Jy ! Total flux subtracted in 200 components = 0.0049837 Jy ! Clean residual min=-0.006552 max=0.007424 Jy/beam ! Clean residual mean=-0.000015 rms=0.001993 Jy/beam ! Combined flux in latest and established models = 0.85073 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 135 components and 0.85073 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.058 mas, bmaj=13.92 mas, bpa=23.97 degrees ! Estimated noise=2777.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000400735 Jy ! Component: 100 - total flux cleaned = 0.00026971 Jy ! Component: 150 - total flux cleaned = 0.000378081 Jy ! Component: 200 - total flux cleaned = 0.00028089 Jy ! Total flux subtracted in 200 components = 0.00028089 Jy ! Clean residual min=-0.006573 max=0.006985 Jy/beam ! Clean residual mean=-0.000011 rms=0.001729 Jy/beam ! Combined flux in latest and established models = 0.851011 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 0.851011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131908Jy sigma=0.000595 ! Fit after self-cal, rms=0.131895Jy sigma=0.000595 wmodel J2129-1538_S_2017_01_16_pus_map.mod ! Writing 156 model components to file: J2129-1538_S_2017_01_16_pus_map.mod wobs J2129-1538_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J2129-1538_S_2017_01_16_pus_uvs.fits wwins J2129-1538_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J2129-1538_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113303 Jy ! Component: 100 - total flux cleaned = 0.00178109 Jy ! Component: 150 - total flux cleaned = 0.00199057 Jy ! Component: 200 - total flux cleaned = 0.00248368 Jy ! Component: 250 - total flux cleaned = 0.00286319 Jy ! Component: 300 - total flux cleaned = 0.0028636 Jy ! Component: 350 - total flux cleaned = 0.00304237 Jy ! Component: 400 - total flux cleaned = 0.00295715 Jy ! Component: 450 - total flux cleaned = 0.00287559 Jy ! Component: 500 - total flux cleaned = 0.00238284 Jy ! Component: 550 - total flux cleaned = 0.0021404 Jy ! Component: 600 - total flux cleaned = 0.00198169 Jy ! Component: 650 - total flux cleaned = 0.00182519 Jy ! Component: 700 - total flux cleaned = 0.00167312 Jy ! Component: 750 - total flux cleaned = 0.00100414 Jy ! Component: 800 - total flux cleaned = 0.000857726 Jy ! Component: 850 - total flux cleaned = 0.000497698 Jy ! Component: 900 - total flux cleaned = 7.39904e-05 Jy ! Component: 950 - total flux cleaned = -0.000204287 Jy ! Component: 1000 - total flux cleaned = -0.000544041 Jy ! Component: 1050 - total flux cleaned = -0.000743978 Jy ! Component: 1100 - total flux cleaned = -0.00107332 Jy ! Component: 1150 - total flux cleaned = -0.00120487 Jy ! Component: 1200 - total flux cleaned = -0.00184739 Jy ! Component: 1250 - total flux cleaned = -0.00222792 Jy ! Component: 1300 - total flux cleaned = -0.00272726 Jy ! Component: 1350 - total flux cleaned = -0.003283 Jy ! Component: 1400 - total flux cleaned = -0.00358741 Jy ! Component: 1450 - total flux cleaned = -0.00388965 Jy ! Component: 1500 - total flux cleaned = -0.00448445 Jy ! Component: 1550 - total flux cleaned = -0.00454345 Jy ! Component: 1600 - total flux cleaned = -0.00477641 Jy ! Component: 1650 - total flux cleaned = -0.00466147 Jy ! Component: 1700 - total flux cleaned = -0.00489103 Jy ! Component: 1750 - total flux cleaned = -0.0050604 Jy ! Component: 1800 - total flux cleaned = -0.00517182 Jy ! Component: 1850 - total flux cleaned = -0.00500578 Jy ! Component: 1900 - total flux cleaned = -0.00511596 Jy ! Component: 1950 - total flux cleaned = -0.00517077 Jy ! Component: 2000 - total flux cleaned = -0.00527901 Jy ! Component: 2050 - total flux cleaned = -0.00527951 Jy ! Component: 2100 - total flux cleaned = -0.00554479 Jy ! Component: 2150 - total flux cleaned = -0.00554519 Jy ! Component: 2200 - total flux cleaned = -0.0055451 Jy ! Component: 2250 - total flux cleaned = -0.00549394 Jy ! Component: 2300 - total flux cleaned = -0.00580115 Jy ! Component: 2350 - total flux cleaned = -0.00574883 Jy ! Component: 2400 - total flux cleaned = -0.00579917 Jy ! Component: 2450 - total flux cleaned = -0.00589956 Jy ! Component: 2500 - total flux cleaned = -0.00609786 Jy ! Component: 2550 - total flux cleaned = -0.00614673 Jy ! Component: 2600 - total flux cleaned = -0.00634237 Jy ! Component: 2650 - total flux cleaned = -0.00643947 Jy ! Component: 2700 - total flux cleaned = -0.00672737 Jy ! Component: 2750 - total flux cleaned = -0.0067267 Jy ! Component: 2800 - total flux cleaned = -0.00677378 Jy ! Component: 2850 - total flux cleaned = -0.00700839 Jy ! Component: 2900 - total flux cleaned = -0.0070078 Jy ! Component: 2950 - total flux cleaned = -0.00714643 Jy ! Component: 3000 - total flux cleaned = -0.00705448 Jy ! Component: 3050 - total flux cleaned = -0.00710024 Jy ! Component: 3100 - total flux cleaned = -0.00732612 Jy ! Component: 3150 - total flux cleaned = -0.00719166 Jy ! Component: 3200 - total flux cleaned = -0.00750418 Jy ! Component: 3250 - total flux cleaned = -0.00763738 Jy ! Component: 3300 - total flux cleaned = -0.00776913 Jy ! Component: 3350 - total flux cleaned = -0.00781306 Jy ! Component: 3400 - total flux cleaned = -0.00794351 Jy ! Component: 3450 - total flux cleaned = -0.00790047 Jy ! Component: 3500 - total flux cleaned = -0.00790057 Jy ! Component: 3550 - total flux cleaned = -0.00802825 Jy ! Component: 3600 - total flux cleaned = -0.00811278 Jy ! Component: 3650 - total flux cleaned = -0.00811296 Jy ! Component: 3700 - total flux cleaned = -0.00811297 Jy ! Component: 3750 - total flux cleaned = -0.00823803 Jy ! Component: 3800 - total flux cleaned = -0.00823841 Jy ! Component: 3850 - total flux cleaned = -0.00827953 Jy ! Component: 3900 - total flux cleaned = -0.00840178 Jy ! Component: 3950 - total flux cleaned = -0.0082393 Jy ! Component: 4000 - total flux cleaned = -0.00827987 Jy ! Component: 4050 - total flux cleaned = -0.00827981 Jy ! Total flux subtracted in 4096 components = -0.00835928 Jy ! Clean residual min=-0.002422 max=0.002751 Jy/beam ! Clean residual mean=-0.000010 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.842652 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 446 components and 0.842652 Jy ![Exited script file: muppet] wmap "J2129-1538_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.058 x 13.92 at 23.97 degrees (North through East) ! Clean map min=-0.0063507 max=0.75315 Jy/beam ! Writing clean map to FITS file: J2129-1538_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.753155 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000763571 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.304149 0.304149 0.608298 1.2166 2.43319 4.86638 9.73276 19.4655 38.931 77.8621 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.753 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.058 x 13.92 at 23.97 degrees (North through East) ! Clean map min=-0.0063507 max=0.75315 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2129-1538_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:22:45 2019