! Started logfile: J2126-0654_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:49:51 2019 obs J2126-0654_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J2126-0654_S_2017_03_27_pus_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.751458 visibilities/baseline/integration-bin. ! Found source: J2126-0654 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 19072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2126-0654_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 286 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 389 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 819 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.993680Jy sigma=0.007412 ! Fit after self-cal, rms=0.947044Jy sigma=0.007105 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=6.711 mas, bpa=-2.229 degrees ! Estimated noise=1081.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429521 Jy ! Component: 100 - total flux cleaned = 0.0528713 Jy ! Total flux subtracted in 100 components = 0.0528713 Jy ! Clean residual min=-0.002966 max=0.003768 Jy/beam ! Clean residual mean=-0.000013 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0528713 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0528713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098196Jy sigma=0.000660 ! Fit after self-cal, rms=0.097352Jy sigma=0.000654 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=7.801 mas, bpa=-1.828 degrees ! Estimated noise=799.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052611 Jy ! Component: 100 - total flux cleaned = 0.00739638 Jy ! Component: 150 - total flux cleaned = 0.00836383 Jy ! Component: 200 - total flux cleaned = 0.00847948 Jy ! Total flux subtracted in 200 components = 0.00847948 Jy ! Clean residual min=-0.002457 max=0.002594 Jy/beam ! Clean residual mean=-0.000012 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0613508 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.0613508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096992Jy sigma=0.000653 ! Fit after self-cal, rms=0.096988Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 0.99 KP 1.08 ! LA 1.01 MK 1.11 NL 1.00 OV 1.09 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.94 KP 1.06 ! LA 1.01 MK 1.00 NL 1.06 OV 1.15 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 HN 0.92 KP 1.03 ! LA 1.01 MK 1.08 NL 0.97 OV 1.01 ! PT 1.05 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.93 HN 0.78 KP 1.00* ! LA 0.74 MK 0.99 NL 1.00* OV 0.69 ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.096988Jy sigma=0.000653 ! Fit after self-cal, rms=0.093777Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.468 mas, bmaj=7.832 mas, bpa=-2.235 degrees ! Estimated noise=807.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278114 Jy ! Component: 100 - total flux cleaned = 0.000281215 Jy ! Component: 150 - total flux cleaned = 0.000295819 Jy ! Component: 200 - total flux cleaned = 0.000309123 Jy ! Total flux subtracted in 200 components = 0.000309123 Jy ! Clean residual min=-0.002522 max=0.002147 Jy/beam ! Clean residual mean=-0.000011 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.0616599 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0616599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093768Jy sigma=0.000651 ! Fit after self-cal, rms=0.093663Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093663Jy sigma=0.000650 ! Fit after self-cal, rms=0.092522Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=7.802 mas, bpa=-2.17 degrees ! Estimated noise=809.135 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000466995 Jy ! Component: 100 - total flux cleaned = 0.000508561 Jy ! Component: 150 - total flux cleaned = 0.000520044 Jy ! Component: 200 - total flux cleaned = 0.00052031 Jy ! Total flux subtracted in 200 components = 0.00052031 Jy ! Clean residual min=-0.002365 max=0.002235 Jy/beam ! Clean residual mean=-0.000007 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0621802 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0621802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092518Jy sigma=0.000649 ! Fit after self-cal, rms=0.092508Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.3668e-05 Jy ! Component: 100 - total flux cleaned = 5.11513e-06 Jy ! Component: 150 - total flux cleaned = 1.72256e-05 Jy ! Component: 200 - total flux cleaned = 3.92478e-05 Jy ! Total flux subtracted in 200 components = 3.92478e-05 Jy ! Clean residual min=-0.002361 max=0.002226 Jy/beam ! Clean residual mean=-0.000008 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0622194 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0622194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092504Jy sigma=0.000648 ! Fit after self-cal, rms=0.092504Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092504Jy sigma=0.000648 ! Fit after self-cal, rms=0.092619Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.795 mas, bpa=-2.209 degrees ! Estimated noise=808.542 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.28112e-05 Jy ! Component: 100 - total flux cleaned = 4.56593e-05 Jy ! Component: 150 - total flux cleaned = 5.65068e-05 Jy ! Component: 200 - total flux cleaned = 6.71783e-05 Jy ! Total flux subtracted in 200 components = 6.71783e-05 Jy ! Clean residual min=-0.002299 max=0.002295 Jy/beam ! Clean residual mean=-0.000006 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0622866 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0622866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092615Jy sigma=0.000648 ! Fit after self-cal, rms=0.092643Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.21114e-06 Jy ! Component: 100 - total flux cleaned = -7.55413e-06 Jy ! Component: 150 - total flux cleaned = 3.29772e-06 Jy ! Component: 200 - total flux cleaned = 1.3967e-05 Jy ! Total flux subtracted in 200 components = 1.3967e-05 Jy ! Clean residual min=-0.002264 max=0.002220 Jy/beam ! Clean residual mean=-0.000006 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0623006 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.0623006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092639Jy sigma=0.000648 ! Fit after self-cal, rms=0.092631Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092631Jy sigma=0.000648 ! Fit after self-cal, rms=0.092885Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.065 mas, bmaj=13.22 mas, bpa=3.474 degrees ! Estimated noise=983.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.76387e-05 Jy ! Component: 100 - total flux cleaned = -6.08671e-05 Jy ! Component: 150 - total flux cleaned = -4.72855e-05 Jy ! Component: 200 - total flux cleaned = -3.66138e-05 Jy ! Total flux subtracted in 200 components = -3.66138e-05 Jy ! Clean residual min=-0.002186 max=0.001871 Jy/beam ! Clean residual mean=-0.000010 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.062264 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 52 components and 0.062264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092885Jy sigma=0.000648 ! Fit after self-cal, rms=0.092894Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67003e-05 Jy ! Component: 100 - total flux cleaned = -1.95219e-05 Jy ! Component: 150 - total flux cleaned = -7.45534e-06 Jy ! Component: 200 - total flux cleaned = -8.04174e-06 Jy ! Total flux subtracted in 200 components = -8.04174e-06 Jy ! Clean residual min=-0.002204 max=0.001870 Jy/beam ! Clean residual mean=-0.000010 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0622559 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 54 components and 0.0622559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092894Jy sigma=0.000648 ! Fit after self-cal, rms=0.092893Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.799 mas, bpa=-2.264 degrees ! Estimated noise=809.037 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.799 at -2.264 degrees (North through East) ! Clean map min=-0.0022 max=0.057643 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=6.73 mas, bpa=-2.805 degrees ! Estimated noise=1085.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0438792 Jy ! Component: 100 - total flux cleaned = 0.0541856 Jy ! Component: 150 - total flux cleaned = 0.0585695 Jy ! Component: 200 - total flux cleaned = 0.0609568 Jy ! Total flux subtracted in 200 components = 0.0609568 Jy ! Clean residual min=-0.002812 max=0.002693 Jy/beam ! Clean residual mean=-0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.0609568 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0609568 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.799 mas, bpa=-2.264 degrees ! Estimated noise=809.037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835996 Jy ! Component: 100 - total flux cleaned = 0.00110404 Jy ! Component: 150 - total flux cleaned = 0.00123931 Jy ! Component: 200 - total flux cleaned = 0.00124169 Jy ! Total flux subtracted in 200 components = 0.00124169 Jy ! Clean residual min=-0.002281 max=0.002179 Jy/beam ! Clean residual mean=-0.000006 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0621985 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 24 components and 0.0621985 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.065 mas, bmaj=13.22 mas, bpa=3.474 degrees ! Estimated noise=983.426 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151465 Jy ! Component: 100 - total flux cleaned = 0.000142939 Jy ! Component: 150 - total flux cleaned = 0.000115684 Jy ! Component: 200 - total flux cleaned = 9.16961e-05 Jy ! Total flux subtracted in 200 components = 9.16961e-05 Jy ! Clean residual min=-0.002231 max=0.001854 Jy/beam ! Clean residual mean=-0.000010 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0622902 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.76416e-05 Jy ! Component: 100 - total flux cleaned = -4.55592e-05 Jy ! Component: 150 - total flux cleaned = -6.14871e-05 Jy ! Component: 200 - total flux cleaned = -7.11559e-05 Jy ! Total flux subtracted in 200 components = -7.11559e-05 Jy ! Clean residual min=-0.002223 max=0.001861 Jy/beam ! Clean residual mean=-0.000010 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.062219 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.062219 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.799 mas, bpa=-2.264 degrees ! Estimated noise=809.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.21023e-05 Jy ! Component: 100 - total flux cleaned = -3.78077e-05 Jy ! Component: 150 - total flux cleaned = -3.89569e-05 Jy ! Component: 200 - total flux cleaned = -2.47757e-05 Jy ! Total flux subtracted in 200 components = -2.47757e-05 Jy ! Clean residual min=-0.002284 max=0.002200 Jy/beam ! Clean residual mean=-0.000005 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0621942 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0621942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092897Jy sigma=0.000648 ! Fit after self-cal, rms=0.092898Jy sigma=0.000648 wmodel J2126-0654_S_2017_03_27_pus_map.mod ! Writing 43 model components to file: J2126-0654_S_2017_03_27_pus_map.mod wobs J2126-0654_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J2126-0654_S_2017_03_27_pus_uvs.fits wwins J2126-0654_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J2126-0654_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549844 Jy ! Component: 100 - total flux cleaned = -0.000697732 Jy ! Component: 150 - total flux cleaned = -0.000766332 Jy ! Component: 200 - total flux cleaned = -0.000798831 Jy ! Component: 250 - total flux cleaned = -0.000923464 Jy ! Component: 300 - total flux cleaned = -0.00122174 Jy ! Component: 350 - total flux cleaned = -0.00133738 Jy ! Component: 400 - total flux cleaned = -0.00136607 Jy ! Component: 450 - total flux cleaned = -0.00136645 Jy ! Component: 500 - total flux cleaned = -0.00136681 Jy ! Component: 550 - total flux cleaned = -0.00128674 Jy ! Component: 600 - total flux cleaned = -0.00136547 Jy ! Component: 650 - total flux cleaned = -0.00133975 Jy ! Component: 700 - total flux cleaned = -0.00141615 Jy ! Component: 750 - total flux cleaned = -0.00146581 Jy ! Component: 800 - total flux cleaned = -0.00156432 Jy ! Component: 850 - total flux cleaned = -0.00161265 Jy ! Component: 900 - total flux cleaned = -0.0016128 Jy ! Component: 950 - total flux cleaned = -0.00170734 Jy ! Component: 1000 - total flux cleaned = -0.00173085 Jy ! Component: 1050 - total flux cleaned = -0.00186875 Jy ! Component: 1100 - total flux cleaned = -0.00191372 Jy ! Component: 1150 - total flux cleaned = -0.00198094 Jy ! Component: 1200 - total flux cleaned = -0.00195845 Jy ! Component: 1250 - total flux cleaned = -0.00200223 Jy ! Component: 1300 - total flux cleaned = -0.00208913 Jy ! Component: 1350 - total flux cleaned = -0.00208925 Jy ! Component: 1400 - total flux cleaned = -0.00217437 Jy ! Component: 1450 - total flux cleaned = -0.0021534 Jy ! Component: 1500 - total flux cleaned = -0.00221592 Jy ! Component: 1550 - total flux cleaned = -0.00223646 Jy ! Component: 1600 - total flux cleaned = -0.00231848 Jy ! Component: 1650 - total flux cleaned = -0.00235863 Jy ! Component: 1700 - total flux cleaned = -0.00243843 Jy ! Component: 1750 - total flux cleaned = -0.00239886 Jy ! Component: 1800 - total flux cleaned = -0.00247797 Jy ! Component: 1850 - total flux cleaned = -0.00251691 Jy ! Component: 1900 - total flux cleaned = -0.00259417 Jy ! Component: 1950 - total flux cleaned = -0.00265201 Jy ! Component: 2000 - total flux cleaned = -0.00272794 Jy ! Component: 2050 - total flux cleaned = -0.002822 Jy ! Component: 2100 - total flux cleaned = -0.00289684 Jy ! Component: 2150 - total flux cleaned = -0.00289673 Jy ! Component: 2200 - total flux cleaned = -0.00300689 Jy ! Component: 2250 - total flux cleaned = -0.00300689 Jy ! Component: 2300 - total flux cleaned = -0.00311505 Jy ! Component: 2350 - total flux cleaned = -0.00315063 Jy ! Component: 2400 - total flux cleaned = -0.0031683 Jy ! Component: 2450 - total flux cleaned = -0.0031683 Jy ! Component: 2500 - total flux cleaned = -0.00315099 Jy ! Component: 2550 - total flux cleaned = -0.00320285 Jy ! Component: 2600 - total flux cleaned = -0.00316868 Jy ! Component: 2650 - total flux cleaned = -0.00316889 Jy ! Component: 2700 - total flux cleaned = -0.00323647 Jy ! Component: 2750 - total flux cleaned = -0.00320311 Jy ! Component: 2800 - total flux cleaned = -0.00323657 Jy ! Component: 2850 - total flux cleaned = -0.00323654 Jy ! Component: 2900 - total flux cleaned = -0.00317106 Jy ! Component: 2950 - total flux cleaned = -0.00326848 Jy ! Component: 3000 - total flux cleaned = -0.00323615 Jy ! Component: 3050 - total flux cleaned = -0.00318812 Jy ! Component: 3100 - total flux cleaned = -0.00318812 Jy ! Component: 3150 - total flux cleaned = -0.00318816 Jy ! Component: 3200 - total flux cleaned = -0.00318818 Jy ! Component: 3250 - total flux cleaned = -0.0031726 Jy ! Component: 3300 - total flux cleaned = -0.00321916 Jy ! Component: 3350 - total flux cleaned = -0.0032038 Jy ! Component: 3400 - total flux cleaned = -0.00318847 Jy ! Component: 3450 - total flux cleaned = -0.00318839 Jy ! Component: 3500 - total flux cleaned = -0.0032185 Jy ! Component: 3550 - total flux cleaned = -0.00318848 Jy ! Component: 3600 - total flux cleaned = -0.00318846 Jy ! Component: 3650 - total flux cleaned = -0.0032329 Jy ! Component: 3700 - total flux cleaned = -0.00321806 Jy ! Component: 3750 - total flux cleaned = -0.00320358 Jy ! Component: 3800 - total flux cleaned = -0.00315989 Jy ! Component: 3850 - total flux cleaned = -0.00313102 Jy ! Component: 3900 - total flux cleaned = -0.00308767 Jy ! Component: 3950 - total flux cleaned = -0.00315918 Jy ! Component: 4000 - total flux cleaned = -0.00308806 Jy ! Component: 4050 - total flux cleaned = -0.00308807 Jy ! Total flux subtracted in 4096 components = -0.00310214 Jy ! Clean residual min=-0.000830 max=0.000970 Jy/beam ! Clean residual mean=-0.000000 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.0590921 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 330 components and 0.0590921 Jy ![Exited script file: muppet] wmap "J2126-0654_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.799 at -2.264 degrees (North through East) ! Clean map min=-0.0019741 max=0.057667 Jy/beam ! Writing clean map to FITS file: J2126-0654_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0576667 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259235 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.34862 1.34862 2.69725 5.39449 10.789 21.578 43.156 86.3119 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.799 at -2.264 degrees (North through East) ! Clean map min=-0.0019741 max=0.057667 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2126-0654_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:49:57 2019