! Started logfile: J2125-2338_S_2017_05_27_pus_uvs.log on Fri May 3 11:14:42 2019 obs J2125-2338_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J2125-2338_S_2017_05_27_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.937481 visibilities/baseline/integration-bin. ! Found source: J2125-2338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12656 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2125-2338_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 412 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932344Jy sigma=0.019516 ! Fit after self-cal, rms=0.916639Jy sigma=0.019444 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=6.937 mas, bpa=-2.157 degrees ! Estimated noise=1054.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433057 Jy ! Component: 100 - total flux cleaned = 0.0513042 Jy ! Total flux subtracted in 100 components = 0.0513042 Jy ! Clean residual min=-0.015020 max=0.020247 Jy/beam ! Clean residual mean=-0.000009 rms=0.004432 Jy/beam ! Combined flux in latest and established models = 0.0513042 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0513042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118841Jy sigma=0.001088 ! Fit after self-cal, rms=0.118880Jy sigma=0.001086 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=7.638 mas, bpa=-1.528 degrees ! Estimated noise=808.564 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225565 Jy ! Component: 100 - total flux cleaned = 0.0350411 Jy ! Component: 150 - total flux cleaned = 0.0431299 Jy ! Component: 200 - total flux cleaned = 0.0462503 Jy ! Total flux subtracted in 200 components = 0.0462503 Jy ! Clean residual min=-0.010515 max=0.016615 Jy/beam ! Clean residual mean=-0.000017 rms=0.003128 Jy/beam ! Combined flux in latest and established models = 0.0975545 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 27 components and 0.0975545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113471Jy sigma=0.000987 ! Fit after self-cal, rms=0.111462Jy sigma=0.000977 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 7.19 FD 0.80 HN 0.91 KP 1.13 ! LA 0.92 MK 1.08 NL 0.86 OV 0.97 ! PT 0.91 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.79 HN 0.92 KP 0.93 ! LA 0.86 MK 0.91 NL 0.99 OV 0.88 ! PT 0.95 SC 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.90 KP 1.00 ! LA 0.91 MK 0.99 NL 0.90 OV 0.80 ! PT 0.94 SC 0.84 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.82 HN 0.75 KP 1.00* ! LA 0.82 MK 1.00 NL 1.00* OV 1.00* ! PT 0.75 SC 1.00* ! ! ! Fit before self-cal, rms=0.111462Jy sigma=0.000977 ! Fit after self-cal, rms=0.307039Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.958 mas, bpa=-3.259 degrees ! Estimated noise=918.061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000411197 Jy ! Component: 100 - total flux cleaned = -0.000526147 Jy ! Component: 150 - total flux cleaned = -0.000626789 Jy ! Component: 200 - total flux cleaned = -0.000807731 Jy ! Total flux subtracted in 200 components = -0.000807731 Jy ! Clean residual min=-0.003378 max=0.004481 Jy/beam ! Clean residual mean=-0.000004 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.0967468 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.0967468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306604Jy sigma=0.000685 ! Fit after self-cal, rms=0.306465Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306465Jy sigma=0.000674 ! Fit after self-cal, rms=0.449022Jy sigma=0.000671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=7.914 mas, bpa=-3.632 degrees ! Estimated noise=920.765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000773359 Jy ! Component: 100 - total flux cleaned = 0.000776957 Jy ! Component: 150 - total flux cleaned = 0.000706318 Jy ! Component: 200 - total flux cleaned = 0.000579856 Jy ! Total flux subtracted in 200 components = 0.000579856 Jy ! Clean residual min=-0.003139 max=0.004595 Jy/beam ! Clean residual mean=-0.000010 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0973267 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 64 components and 0.0973267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448663Jy sigma=0.000670 ! Fit after self-cal, rms=0.448686Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400901 Jy ! Component: 100 - total flux cleaned = 0.00486808 Jy ! Component: 150 - total flux cleaned = 0.00519394 Jy ! Component: 200 - total flux cleaned = 0.00542277 Jy ! Total flux subtracted in 200 components = 0.00542277 Jy ! Clean residual min=-0.002817 max=0.003546 Jy/beam ! Clean residual mean=-0.000006 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.102749 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 84 components and 0.102749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448427Jy sigma=0.000669 ! Fit after self-cal, rms=0.448416Jy sigma=0.000669 ! Inverting map ! Added new window around map position (-41, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311958 Jy ! Component: 100 - total flux cleaned = 0.00368547 Jy ! Component: 150 - total flux cleaned = 0.00409956 Jy ! Component: 200 - total flux cleaned = 0.00436814 Jy ! Total flux subtracted in 200 components = 0.00436814 Jy ! Clean residual min=-0.002752 max=0.002931 Jy/beam ! Clean residual mean=-0.000004 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.107118 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 116 components and 0.107118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448228Jy sigma=0.000668 ! Fit after self-cal, rms=0.448226Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448226Jy sigma=0.000668 ! Fit after self-cal, rms=0.183089Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=7.924 mas, bpa=-4.02 degrees ! Estimated noise=916.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000889075 Jy ! Component: 100 - total flux cleaned = 0.00118057 Jy ! Component: 150 - total flux cleaned = 0.00122428 Jy ! Component: 200 - total flux cleaned = 0.00126274 Jy ! Total flux subtracted in 200 components = 0.00126274 Jy ! Clean residual min=-0.002461 max=0.002596 Jy/beam ! Clean residual mean=-0.000008 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.10838 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 136 components and 0.10838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183012Jy sigma=0.000663 ! Fit after self-cal, rms=0.182968Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78158e-05 Jy ! Component: 100 - total flux cleaned = 0.000115698 Jy ! Component: 150 - total flux cleaned = 0.000152278 Jy ! Component: 200 - total flux cleaned = 0.000221983 Jy ! Total flux subtracted in 200 components = 0.000221983 Jy ! Clean residual min=-0.002405 max=0.002559 Jy/beam ! Clean residual mean=-0.000008 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.108602 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 140 components and 0.108602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182898Jy sigma=0.000662 ! Fit after self-cal, rms=0.182890Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182890Jy sigma=0.000662 ! Fit after self-cal, rms=0.188301Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=18.98 mas, bpa=-0.4374 degrees ! Estimated noise=1176.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180695 Jy ! Component: 100 - total flux cleaned = 0.000219771 Jy ! Component: 150 - total flux cleaned = 0.000257505 Jy ! Component: 200 - total flux cleaned = 0.00029387 Jy ! Total flux subtracted in 200 components = 0.00029387 Jy ! Clean residual min=-0.002611 max=0.003331 Jy/beam ! Clean residual mean=-0.000019 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.108896 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 144 components and 0.108896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188254Jy sigma=0.000662 ! Fit after self-cal, rms=0.188251Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147433 Jy ! Component: 100 - total flux cleaned = 0.000181742 Jy ! Component: 150 - total flux cleaned = 0.000182699 Jy ! Component: 200 - total flux cleaned = 0.000214226 Jy ! Total flux subtracted in 200 components = 0.000214226 Jy ! Clean residual min=-0.002580 max=0.003266 Jy/beam ! Clean residual mean=-0.000019 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.10911 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 145 components and 0.10911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188213Jy sigma=0.000662 ! Fit after self-cal, rms=0.188211Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.908 mas, bpa=-4.151 degrees ! Estimated noise=916.363 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 7.908 at -4.151 degrees (North through East) ! Clean map min=-0.0027716 max=0.06573 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.846 mas, bpa=-4.814 degrees ! Estimated noise=1382.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573485 Jy ! Component: 100 - total flux cleaned = 0.0725119 Jy ! Component: 150 - total flux cleaned = 0.080248 Jy ! Component: 200 - total flux cleaned = 0.0857766 Jy ! Total flux subtracted in 200 components = 0.0857766 Jy ! Clean residual min=-0.004439 max=0.004237 Jy/beam ! Clean residual mean=-0.000014 rms=0.001113 Jy/beam ! Combined flux in latest and established models = 0.0857767 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.0857767 Jy ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.908 mas, bpa=-4.151 degrees ! Estimated noise=916.363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619462 Jy ! Component: 100 - total flux cleaned = 0.0102671 Jy ! Component: 150 - total flux cleaned = 0.0132915 Jy ! Component: 200 - total flux cleaned = 0.0156851 Jy ! Total flux subtracted in 200 components = 0.0156851 Jy ! Clean residual min=-0.002620 max=0.002467 Jy/beam ! Clean residual mean=-0.000017 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.101462 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 70 components and 0.101462 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=18.98 mas, bpa=-0.4374 degrees ! Estimated noise=1176.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252655 Jy ! Component: 100 - total flux cleaned = 0.00408507 Jy ! Component: 150 - total flux cleaned = 0.00507484 Jy ! Component: 200 - total flux cleaned = 0.00557188 Jy ! Total flux subtracted in 200 components = 0.00557188 Jy ! Clean residual min=-0.002303 max=0.002826 Jy/beam ! Clean residual mean=-0.000021 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.107034 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361092 Jy ! Component: 100 - total flux cleaned = 0.000549713 Jy ! Component: 150 - total flux cleaned = 0.000672437 Jy ! Component: 200 - total flux cleaned = 0.000788473 Jy ! Total flux subtracted in 200 components = 0.000788473 Jy ! Clean residual min=-0.002223 max=0.002646 Jy/beam ! Clean residual mean=-0.000019 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.107822 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 122 components and 0.107822 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.998 mas, bmaj=7.908 mas, bpa=-4.151 degrees ! Estimated noise=916.363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426905 Jy ! Component: 100 - total flux cleaned = 0.000604871 Jy ! Component: 150 - total flux cleaned = 0.000763494 Jy ! Component: 200 - total flux cleaned = 0.00083612 Jy ! Total flux subtracted in 200 components = 0.00083612 Jy ! Clean residual min=-0.002219 max=0.002091 Jy/beam ! Clean residual mean=-0.000008 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.108658 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 140 components and 0.108658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187821Jy sigma=0.000662 ! Fit after self-cal, rms=0.187791Jy sigma=0.000662 wmodel J2125-2338_S_2017_05_27_pus_map.mod ! Writing 140 model components to file: J2125-2338_S_2017_05_27_pus_map.mod wobs J2125-2338_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J2125-2338_S_2017_05_27_pus_uvs.fits wwins J2125-2338_S_2017_05_27_pus_map.win ! wwins: Wrote 5 windows to J2125-2338_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314845 Jy ! Component: 100 - total flux cleaned = 0.000646997 Jy ! Component: 150 - total flux cleaned = 0.000962736 Jy ! Component: 200 - total flux cleaned = 0.001129 Jy ! Component: 250 - total flux cleaned = 0.00116221 Jy ! Component: 300 - total flux cleaned = 0.00122483 Jy ! Component: 350 - total flux cleaned = 0.00125458 Jy ! Component: 400 - total flux cleaned = 0.00116526 Jy ! Component: 450 - total flux cleaned = 0.00113646 Jy ! Component: 500 - total flux cleaned = 0.00127712 Jy ! Component: 550 - total flux cleaned = 0.00124933 Jy ! Component: 600 - total flux cleaned = 0.00122294 Jy ! Component: 650 - total flux cleaned = 0.00124895 Jy ! Component: 700 - total flux cleaned = 0.00114547 Jy ! Component: 750 - total flux cleaned = 0.00114509 Jy ! Component: 800 - total flux cleaned = 0.00102041 Jy ! Component: 850 - total flux cleaned = 0.00104536 Jy ! Component: 900 - total flux cleaned = 0.00097313 Jy ! Component: 950 - total flux cleaned = 0.000901675 Jy ! Component: 1000 - total flux cleaned = 0.000855029 Jy ! Component: 1050 - total flux cleaned = 0.000785606 Jy ! Component: 1100 - total flux cleaned = 0.000694887 Jy ! Component: 1150 - total flux cleaned = 0.000605673 Jy ! Component: 1200 - total flux cleaned = 0.000561852 Jy ! Component: 1250 - total flux cleaned = 0.0004753 Jy ! Component: 1300 - total flux cleaned = 0.000432134 Jy ! Component: 1350 - total flux cleaned = 0.000368164 Jy ! Component: 1400 - total flux cleaned = 0.000304774 Jy ! Component: 1450 - total flux cleaned = 0.000181367 Jy ! Component: 1500 - total flux cleaned = 0.000181349 Jy ! Component: 1550 - total flux cleaned = 0.000101174 Jy ! Component: 1600 - total flux cleaned = 0.000160609 Jy ! Component: 1650 - total flux cleaned = 0.000141006 Jy ! Component: 1700 - total flux cleaned = 0.000179676 Jy ! Component: 1750 - total flux cleaned = 0.000179439 Jy ! Component: 1800 - total flux cleaned = 0.000160931 Jy ! Component: 1850 - total flux cleaned = 0.000179787 Jy ! Component: 1900 - total flux cleaned = 0.00014327 Jy ! Component: 1950 - total flux cleaned = 0.000179867 Jy ! Component: 2000 - total flux cleaned = 0.000197856 Jy ! Component: 2050 - total flux cleaned = 0.000251151 Jy ! Component: 2100 - total flux cleaned = 0.000286697 Jy ! Component: 2150 - total flux cleaned = 0.000303964 Jy ! Component: 2200 - total flux cleaned = 0.0003558 Jy ! Component: 2250 - total flux cleaned = 0.000372657 Jy ! Component: 2300 - total flux cleaned = 0.000440164 Jy ! Component: 2350 - total flux cleaned = 0.000439989 Jy ! Component: 2400 - total flux cleaned = 0.000456682 Jy ! Component: 2450 - total flux cleaned = 0.000555203 Jy ! Component: 2500 - total flux cleaned = 0.000619985 Jy ! Component: 2550 - total flux cleaned = 0.000636098 Jy ! Component: 2600 - total flux cleaned = 0.000779361 Jy ! Component: 2650 - total flux cleaned = 0.000763383 Jy ! Component: 2700 - total flux cleaned = 0.000810482 Jy ! Component: 2750 - total flux cleaned = 0.000857027 Jy ! Component: 2800 - total flux cleaned = 0.000856844 Jy ! Component: 2850 - total flux cleaned = 0.000948291 Jy ! Component: 2900 - total flux cleaned = 0.00102378 Jy ! Component: 2950 - total flux cleaned = 0.00106866 Jy ! Component: 3000 - total flux cleaned = 0.00112812 Jy ! Component: 3050 - total flux cleaned = 0.00118725 Jy ! Component: 3100 - total flux cleaned = 0.00120175 Jy ! Component: 3150 - total flux cleaned = 0.00130352 Jy ! Component: 3200 - total flux cleaned = 0.00134678 Jy ! Component: 3250 - total flux cleaned = 0.00137541 Jy ! Component: 3300 - total flux cleaned = 0.00141813 Jy ! Component: 3350 - total flux cleaned = 0.00146043 Jy ! Component: 3400 - total flux cleaned = 0.00155843 Jy ! Component: 3450 - total flux cleaned = 0.0015584 Jy ! Component: 3500 - total flux cleaned = 0.00157231 Jy ! Component: 3550 - total flux cleaned = 0.00164068 Jy ! Component: 3600 - total flux cleaned = 0.00173583 Jy ! Component: 3650 - total flux cleaned = 0.00176285 Jy ! Component: 3700 - total flux cleaned = 0.00174946 Jy ! Component: 3750 - total flux cleaned = 0.00184284 Jy ! Component: 3800 - total flux cleaned = 0.00186912 Jy ! Component: 3850 - total flux cleaned = 0.00189535 Jy ! Component: 3900 - total flux cleaned = 0.00199966 Jy ! Component: 3950 - total flux cleaned = 0.0020255 Jy ! Component: 4000 - total flux cleaned = 0.00205141 Jy ! Component: 4050 - total flux cleaned = 0.00211536 Jy ! Total flux subtracted in 4096 components = 0.00215348 Jy ! Clean residual min=-0.000728 max=0.000699 Jy/beam ! Clean residual mean=0.000001 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.110812 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 414 components and 0.110812 Jy ![Exited script file: muppet] wmap "J2125-2338_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 7.908 at -4.151 degrees (North through East) ! Clean map min=-0.0014352 max=0.070801 Jy/beam ! Writing clean map to FITS file: J2125-2338_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0708009 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000228546 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.968402 0.968402 1.9368 3.87361 7.74721 15.4944 30.9889 61.9777 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.998 x 7.908 at -4.151 degrees (North through East) ! Clean map min=-0.0014352 max=0.070801 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2125-2338_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:14:47 2019