! Started logfile: J2124-1941_S_2017_08_05_pus_uvs.log on Thu May 9 19:39:27 2019 obs J2124-1941_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J2124-1941_S_2017_08_05_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965333 visibilities/baseline/integration-bin. ! Found source: J2124-1941 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 13032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2124-1941_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 506 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.919159Jy sigma=0.007147 ! Fit after self-cal, rms=0.902520Jy sigma=0.007028 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.486 mas, bmaj=6.76 mas, bpa=-5.586 degrees ! Estimated noise=1499.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077563 Jy ! Component: 100 - total flux cleaned = 0.0945186 Jy ! Total flux subtracted in 100 components = 0.0945186 Jy ! Clean residual min=-0.006922 max=0.008018 Jy/beam ! Clean residual mean=-0.000007 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.0945186 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0945186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093347Jy sigma=0.000677 ! Fit after self-cal, rms=0.093343Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.908 mas, bpa=-3.795 degrees ! Estimated noise=959.661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081528 Jy ! Component: 100 - total flux cleaned = 0.0127707 Jy ! Component: 150 - total flux cleaned = 0.0145243 Jy ! Component: 200 - total flux cleaned = 0.0147167 Jy ! Total flux subtracted in 200 components = 0.0147167 Jy ! Clean residual min=-0.005006 max=0.005308 Jy/beam ! Clean residual mean=-0.000009 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.109235 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.109235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092477Jy sigma=0.000672 ! Fit after self-cal, rms=0.092425Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.96 HN 1.12 KP 1.09 ! LA 1.00 MK 1.02 NL 0.87 OV 0.98 ! PT 1.03 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.15 KP 1.02 ! LA 0.96 MK 0.99 NL 1.07 OV 1.01 ! PT 0.97 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.07 KP 0.89 ! LA 0.76 MK 1.02 NL 1.13 OV 0.88 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.03 KP 1.00* ! LA 1.00* MK 1.43 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.092425Jy sigma=0.000671 ! Fit after self-cal, rms=0.091080Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.832 mas, bpa=-2.639 degrees ! Estimated noise=956.383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00139191 Jy ! Component: 100 - total flux cleaned = -0.00182672 Jy ! Component: 150 - total flux cleaned = -0.00197313 Jy ! Component: 200 - total flux cleaned = -0.00210538 Jy ! Total flux subtracted in 200 components = -0.00210538 Jy ! Clean residual min=-0.003645 max=0.003991 Jy/beam ! Clean residual mean=-0.000008 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.10713 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.10713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090890Jy sigma=0.000665 ! Fit after self-cal, rms=0.090951Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090951Jy sigma=0.000665 ! Fit after self-cal, rms=0.099599Jy sigma=0.000658 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.832 mas, bpa=-3.307 degrees ! Estimated noise=961.446 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185933 Jy ! Component: 100 - total flux cleaned = 0.000287673 Jy ! Component: 150 - total flux cleaned = 0.000288813 Jy ! Component: 200 - total flux cleaned = 0.000290264 Jy ! Total flux subtracted in 200 components = 0.000290264 Jy ! Clean residual min=-0.002888 max=0.002866 Jy/beam ! Clean residual mean=-0.000001 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.10742 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.10742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099573Jy sigma=0.000658 ! Fit after self-cal, rms=0.099771Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (124.5, 112). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258683 Jy ! Component: 100 - total flux cleaned = 0.00298485 Jy ! Component: 150 - total flux cleaned = 0.00311929 Jy ! Component: 200 - total flux cleaned = 0.00323877 Jy ! Total flux subtracted in 200 components = 0.00323877 Jy ! Clean residual min=-0.002576 max=0.002297 Jy/beam ! Clean residual mean=-0.000002 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.110659 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.110659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099687Jy sigma=0.000657 ! Fit after self-cal, rms=0.099681Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099681Jy sigma=0.000657 ! Fit after self-cal, rms=0.100499Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=7.823 mas, bpa=-3.235 degrees ! Estimated noise=959.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728534 Jy ! Component: 100 - total flux cleaned = 0.00100832 Jy ! Component: 150 - total flux cleaned = 0.00118662 Jy ! Component: 200 - total flux cleaned = 0.00128551 Jy ! Total flux subtracted in 200 components = 0.00128551 Jy ! Clean residual min=-0.002459 max=0.002293 Jy/beam ! Clean residual mean=-0.000002 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.111944 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 72 components and 0.111944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100465Jy sigma=0.000657 ! Fit after self-cal, rms=0.100472Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274404 Jy ! Component: 100 - total flux cleaned = 0.000395801 Jy ! Component: 150 - total flux cleaned = 0.000452807 Jy ! Component: 200 - total flux cleaned = 0.000532046 Jy ! Total flux subtracted in 200 components = 0.000532046 Jy ! Clean residual min=-0.002417 max=0.002246 Jy/beam ! Clean residual mean=-0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.112476 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 0.112477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100453Jy sigma=0.000657 ! Fit after self-cal, rms=0.100454Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100454Jy sigma=0.000657 ! Fit after self-cal, rms=0.100474Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.6 mas, bmaj=16.69 mas, bpa=-0.1454 degrees ! Estimated noise=1225.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742084 Jy ! Component: 100 - total flux cleaned = 0.0010159 Jy ! Component: 150 - total flux cleaned = 0.00105969 Jy ! Component: 200 - total flux cleaned = 0.00107789 Jy ! Total flux subtracted in 200 components = 0.00107789 Jy ! Clean residual min=-0.003154 max=0.002472 Jy/beam ! Clean residual mean=-0.000004 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.113554 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 0.113554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100467Jy sigma=0.000657 ! Fit after self-cal, rms=0.100468Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85878e-05 Jy ! Component: 100 - total flux cleaned = 0.000103904 Jy ! Component: 150 - total flux cleaned = 0.000104375 Jy ! Component: 200 - total flux cleaned = 0.0001045 Jy ! Total flux subtracted in 200 components = 0.0001045 Jy ! Clean residual min=-0.003136 max=0.002456 Jy/beam ! Clean residual mean=-0.000004 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.113659 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 100 components and 0.113659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100463Jy sigma=0.000657 ! Fit after self-cal, rms=0.100463Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.817 mas, bpa=-3.224 degrees ! Estimated noise=958.772 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.817 at -3.224 degrees (North through East) ! Clean map min=-0.0023929 max=0.096495 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=6.723 mas, bpa=-4.888 degrees ! Estimated noise=1542.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0783579 Jy ! Component: 100 - total flux cleaned = 0.0956558 Jy ! Component: 150 - total flux cleaned = 0.101595 Jy ! Component: 200 - total flux cleaned = 0.105596 Jy ! Total flux subtracted in 200 components = 0.105596 Jy ! Clean residual min=-0.003382 max=0.003177 Jy/beam ! Clean residual mean=-0.000004 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.105596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.105596 Jy ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.817 mas, bpa=-3.224 degrees ! Estimated noise=958.772 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (39.5, -63.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325512 Jy ! Component: 100 - total flux cleaned = 0.00549205 Jy ! Component: 150 - total flux cleaned = 0.00643761 Jy ! Component: 200 - total flux cleaned = 0.0067578 Jy ! Total flux subtracted in 200 components = 0.0067578 Jy ! Clean residual min=-0.002653 max=0.002253 Jy/beam ! Clean residual mean=-0.000003 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.112354 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.112354 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.6 mas, bmaj=16.69 mas, bpa=-0.1454 degrees ! Estimated noise=1225.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00097982 Jy ! Component: 100 - total flux cleaned = 0.00145507 Jy ! Component: 150 - total flux cleaned = 0.00176286 Jy ! Component: 200 - total flux cleaned = 0.00187894 Jy ! Total flux subtracted in 200 components = 0.00187894 Jy ! Clean residual min=-0.003447 max=0.002248 Jy/beam ! Clean residual mean=-0.000003 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.114233 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7244e-05 Jy ! Component: 100 - total flux cleaned = 5.31374e-05 Jy ! Component: 150 - total flux cleaned = 5.36106e-05 Jy ! Component: 200 - total flux cleaned = 7.68121e-05 Jy ! Total flux subtracted in 200 components = 7.68121e-05 Jy ! Clean residual min=-0.003343 max=0.002206 Jy/beam ! Clean residual mean=-0.000003 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.11431 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 67 components and 0.11431 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.091 mas, bmaj=7.817 mas, bpa=-3.224 degrees ! Estimated noise=958.772 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583475 Jy ! Component: 100 - total flux cleaned = -0.000686099 Jy ! Component: 150 - total flux cleaned = -0.000593721 Jy ! Component: 200 - total flux cleaned = -0.000465956 Jy ! Total flux subtracted in 200 components = -0.000465956 Jy ! Clean residual min=-0.002482 max=0.002089 Jy/beam ! Clean residual mean=-0.000001 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.113844 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.113844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100505Jy sigma=0.000657 ! Fit after self-cal, rms=0.100485Jy sigma=0.000657 wmodel J2124-1941_S_2017_08_05_pus_map.mod ! Writing 82 model components to file: J2124-1941_S_2017_08_05_pus_map.mod wobs J2124-1941_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J2124-1941_S_2017_08_05_pus_uvs.fits wwins J2124-1941_S_2017_08_05_pus_map.win ! wwins: Wrote 4 windows to J2124-1941_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110755 Jy ! Component: 100 - total flux cleaned = -0.00203391 Jy ! Component: 150 - total flux cleaned = -0.00286079 Jy ! Component: 200 - total flux cleaned = -0.00360885 Jy ! Component: 250 - total flux cleaned = -0.00418557 Jy ! Component: 300 - total flux cleaned = -0.00470592 Jy ! Component: 350 - total flux cleaned = -0.0050832 Jy ! Component: 400 - total flux cleaned = -0.00529665 Jy ! Component: 450 - total flux cleaned = -0.00541547 Jy ! Component: 500 - total flux cleaned = -0.00550312 Jy ! Component: 550 - total flux cleaned = -0.00570227 Jy ! Component: 600 - total flux cleaned = -0.00589583 Jy ! Component: 650 - total flux cleaned = -0.00592232 Jy ! Component: 700 - total flux cleaned = -0.00594894 Jy ! Component: 750 - total flux cleaned = -0.00602724 Jy ! Component: 800 - total flux cleaned = -0.00607855 Jy ! Component: 850 - total flux cleaned = -0.00617912 Jy ! Component: 900 - total flux cleaned = -0.00625292 Jy ! Component: 950 - total flux cleaned = -0.00635055 Jy ! Component: 1000 - total flux cleaned = -0.00644646 Jy ! Component: 1050 - total flux cleaned = -0.00658806 Jy ! Component: 1100 - total flux cleaned = -0.00663418 Jy ! Component: 1150 - total flux cleaned = -0.00677214 Jy ! Component: 1200 - total flux cleaned = -0.00688512 Jy ! Component: 1250 - total flux cleaned = -0.00688524 Jy ! Component: 1300 - total flux cleaned = -0.00701734 Jy ! Component: 1350 - total flux cleaned = -0.0071257 Jy ! Component: 1400 - total flux cleaned = -0.00706091 Jy ! Component: 1450 - total flux cleaned = -0.00701865 Jy ! Component: 1500 - total flux cleaned = -0.00708211 Jy ! Component: 1550 - total flux cleaned = -0.00714432 Jy ! Component: 1600 - total flux cleaned = -0.00718494 Jy ! Component: 1650 - total flux cleaned = -0.00716446 Jy ! Component: 1700 - total flux cleaned = -0.00716446 Jy ! Component: 1750 - total flux cleaned = -0.00718427 Jy ! Component: 1800 - total flux cleaned = -0.00724282 Jy ! Component: 1850 - total flux cleaned = -0.00733906 Jy ! Component: 1900 - total flux cleaned = -0.00737674 Jy ! Component: 1950 - total flux cleaned = -0.00730105 Jy ! Component: 2000 - total flux cleaned = -0.00735725 Jy ! Component: 2050 - total flux cleaned = -0.00731992 Jy ! Component: 2100 - total flux cleaned = -0.00733825 Jy ! Component: 2150 - total flux cleaned = -0.0073385 Jy ! Component: 2200 - total flux cleaned = -0.00735648 Jy ! Component: 2250 - total flux cleaned = -0.00735657 Jy ! Component: 2300 - total flux cleaned = -0.00730354 Jy ! Component: 2350 - total flux cleaned = -0.00735615 Jy ! Component: 2400 - total flux cleaned = -0.00728653 Jy ! Component: 2450 - total flux cleaned = -0.00723477 Jy ! Component: 2500 - total flux cleaned = -0.0072178 Jy ! Component: 2550 - total flux cleaned = -0.00723479 Jy ! Component: 2600 - total flux cleaned = -0.00720137 Jy ! Component: 2650 - total flux cleaned = -0.007185 Jy ! Component: 2700 - total flux cleaned = -0.00718506 Jy ! Component: 2750 - total flux cleaned = -0.00713608 Jy ! Component: 2800 - total flux cleaned = -0.00715242 Jy ! Component: 2850 - total flux cleaned = -0.00708791 Jy ! Component: 2900 - total flux cleaned = -0.0070238 Jy ! Component: 2950 - total flux cleaned = -0.00700785 Jy ! Component: 3000 - total flux cleaned = -0.00694458 Jy ! Component: 3050 - total flux cleaned = -0.00689745 Jy ! Component: 3100 - total flux cleaned = -0.00685062 Jy ! Component: 3150 - total flux cleaned = -0.0068197 Jy ! Component: 3200 - total flux cleaned = -0.00678886 Jy ! Component: 3250 - total flux cleaned = -0.00669709 Jy ! Component: 3300 - total flux cleaned = -0.00665142 Jy ! Component: 3350 - total flux cleaned = -0.00654576 Jy ! Component: 3400 - total flux cleaned = -0.00653077 Jy ! Component: 3450 - total flux cleaned = -0.00642646 Jy ! Component: 3500 - total flux cleaned = -0.00639681 Jy ! Component: 3550 - total flux cleaned = -0.00629373 Jy ! Component: 3600 - total flux cleaned = -0.0062352 Jy ! Component: 3650 - total flux cleaned = -0.00620609 Jy ! Component: 3700 - total flux cleaned = -0.00613356 Jy ! Component: 3750 - total flux cleaned = -0.00607599 Jy ! Component: 3800 - total flux cleaned = -0.00600439 Jy ! Component: 3850 - total flux cleaned = -0.0059476 Jy ! Component: 3900 - total flux cleaned = -0.00594766 Jy ! Component: 3950 - total flux cleaned = -0.0058773 Jy ! Component: 4000 - total flux cleaned = -0.00580729 Jy ! Component: 4050 - total flux cleaned = -0.00575167 Jy ! Total flux subtracted in 4096 components = -0.00569627 Jy ! Clean residual min=-0.000800 max=0.001065 Jy/beam ! Clean residual mean=0.000000 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.108147 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 367 components and 0.108147 Jy ![Exited script file: muppet] wmap "J2124-1941_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.817 at -3.224 degrees (North through East) ! Clean map min=-0.0021205 max=0.096455 Jy/beam ! Writing clean map to FITS file: J2124-1941_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0964548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251775 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.783086 0.783086 1.56617 3.13234 6.26469 12.5294 25.0587 50.1175 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.096 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.091 x 7.817 at -3.224 degrees (North through East) ! Clean map min=-0.0021205 max=0.096455 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2124-1941_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:39:32 2019