! Started logfile: J2121-3703_S_2017_02_24_pus_uvs.log on Sat May 4 11:35:37 2019 obs J2121-3703_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J2121-3703_S_2017_02_24_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.699649 visibilities/baseline/integration-bin. ! Found source: J2121-3703 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 11964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2121-3703_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.767224Jy sigma=0.004288 ! Fit after self-cal, rms=0.744575Jy sigma=0.004167 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=8.099 mas, bpa=2.045 degrees ! Estimated noise=1997.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200009 Jy ! Component: 100 - total flux cleaned = 0.250493 Jy ! Total flux subtracted in 100 components = 0.250493 Jy ! Clean residual min=-0.010850 max=0.023766 Jy/beam ! Clean residual mean=-0.000082 rms=0.003381 Jy/beam ! Combined flux in latest and established models = 0.250494 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.250494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138387Jy sigma=0.000716 ! Fit after self-cal, rms=0.138392Jy sigma=0.000716 ! Inverting map ! Added new window around map position (2, 10.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234552 Jy ! Component: 100 - total flux cleaned = 0.0360902 Jy ! Total flux subtracted in 100 components = 0.0360902 Jy ! Clean residual min=-0.009125 max=0.013564 Jy/beam ! Clean residual mean=-0.000044 rms=0.002491 Jy/beam ! Combined flux in latest and established models = 0.286584 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.286584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133261Jy sigma=0.000679 ! Fit after self-cal, rms=0.133227Jy sigma=0.000679 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=10.21 mas, bpa=2.097 degrees ! Estimated noise=1265.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128695 Jy ! Component: 100 - total flux cleaned = 0.0196524 Jy ! Component: 150 - total flux cleaned = 0.0211175 Jy ! Component: 200 - total flux cleaned = 0.0218863 Jy ! Total flux subtracted in 200 components = 0.0218863 Jy ! Clean residual min=-0.005129 max=0.009295 Jy/beam ! Clean residual mean=-0.000066 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.30847 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 55 components and 0.30847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131939Jy sigma=0.000671 ! Fit after self-cal, rms=0.131944Jy sigma=0.000671 ! Inverting map ! Added new window around map position (-10, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00563448 Jy ! Component: 100 - total flux cleaned = 0.00656354 Jy ! Component: 150 - total flux cleaned = 0.00730652 Jy ! Component: 200 - total flux cleaned = 0.0079216 Jy ! Total flux subtracted in 200 components = 0.0079216 Jy ! Clean residual min=-0.004783 max=0.005625 Jy/beam ! Clean residual mean=-0.000043 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.316392 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 0.316391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131225Jy sigma=0.000668 ! Fit after self-cal, rms=0.131196Jy sigma=0.000668 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.11 KP 0.97 ! LA 0.97 MK 0.96 NL 0.99 OV 1.02 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.22 KP 0.94 ! LA 0.93 MK 1.01 NL 0.99 OV 1.05 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.08 KP 1.02 ! LA 1.01 MK 1.01 NL 1.11 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.02 KP 1.00* ! LA 0.92 MK 0.98 NL 1.00* OV 0.99 ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.131196Jy sigma=0.000668 ! Fit after self-cal, rms=0.131873Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=10.18 mas, bpa=2.286 degrees ! Estimated noise=1264.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193763 Jy ! Component: 100 - total flux cleaned = -0.00224816 Jy ! Component: 150 - total flux cleaned = -0.00241935 Jy ! Component: 200 - total flux cleaned = -0.00242125 Jy ! Total flux subtracted in 200 components = -0.00242125 Jy ! Clean residual min=-0.003205 max=0.003549 Jy/beam ! Clean residual mean=0.000009 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.31397 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 115 components and 0.31397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131697Jy sigma=0.000661 ! Fit after self-cal, rms=0.131711Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131711Jy sigma=0.000661 ! Fit after self-cal, rms=0.132815Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=10.18 mas, bpa=2.308 degrees ! Estimated noise=1261.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106892 Jy ! Component: 100 - total flux cleaned = -0.00138015 Jy ! Component: 150 - total flux cleaned = -0.00168953 Jy ! Component: 200 - total flux cleaned = -0.00184956 Jy ! Total flux subtracted in 200 components = -0.00184956 Jy ! Clean residual min=-0.002793 max=0.002906 Jy/beam ! Clean residual mean=0.000003 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.312121 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 0.312121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132769Jy sigma=0.000659 ! Fit after self-cal, rms=0.132788Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000343894 Jy ! Component: 100 - total flux cleaned = -0.000343994 Jy ! Component: 150 - total flux cleaned = -0.000379015 Jy ! Component: 200 - total flux cleaned = -0.000446154 Jy ! Total flux subtracted in 200 components = -0.000446154 Jy ! Clean residual min=-0.002799 max=0.002841 Jy/beam ! Clean residual mean=0.000002 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.311675 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 159 components and 0.311675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132766Jy sigma=0.000659 ! Fit after self-cal, rms=0.132762Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132762Jy sigma=0.000659 ! Fit after self-cal, rms=0.133205Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=10.18 mas, bpa=2.301 degrees ! Estimated noise=1260.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000976266 Jy ! Component: 100 - total flux cleaned = -0.00101382 Jy ! Component: 150 - total flux cleaned = -0.00108072 Jy ! Component: 200 - total flux cleaned = -0.00111192 Jy ! Total flux subtracted in 200 components = -0.00111192 Jy ! Clean residual min=-0.002764 max=0.002752 Jy/beam ! Clean residual mean=0.000003 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.310563 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 166 components and 0.310562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133181Jy sigma=0.000659 ! Fit after self-cal, rms=0.133184Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178914 Jy ! Component: 100 - total flux cleaned = -0.000208435 Jy ! Component: 150 - total flux cleaned = -0.000237836 Jy ! Component: 200 - total flux cleaned = -0.00029359 Jy ! Total flux subtracted in 200 components = -0.00029359 Jy ! Clean residual min=-0.002769 max=0.002717 Jy/beam ! Clean residual mean=0.000002 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.310269 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 170 components and 0.310269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133170Jy sigma=0.000659 ! Fit after self-cal, rms=0.133168Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133168Jy sigma=0.000659 ! Fit after self-cal, rms=0.133444Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.573 mas, bmaj=25.88 mas, bpa=1.081 degrees ! Estimated noise=1503.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109183 Jy ! Component: 100 - total flux cleaned = -0.00125989 Jy ! Component: 150 - total flux cleaned = -0.00138442 Jy ! Component: 200 - total flux cleaned = -0.00145415 Jy ! Total flux subtracted in 200 components = -0.00145415 Jy ! Clean residual min=-0.003049 max=0.002463 Jy/beam ! Clean residual mean=0.000003 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.308815 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 185 components and 0.308815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133433Jy sigma=0.000659 ! Fit after self-cal, rms=0.133432Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269932 Jy ! Component: 100 - total flux cleaned = -0.000335204 Jy ! Component: 150 - total flux cleaned = -0.000376936 Jy ! Component: 200 - total flux cleaned = -0.000377394 Jy ! Total flux subtracted in 200 components = -0.000377394 Jy ! Clean residual min=-0.003034 max=0.002430 Jy/beam ! Clean residual mean=0.000000 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.308437 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 196 components and 0.308437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133428Jy sigma=0.000659 ! Fit after self-cal, rms=0.133426Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.18 mas, bpa=2.294 degrees ! Estimated noise=1260.3 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.18 at 2.294 degrees (North through East) ! Clean map min=-0.0045941 max=0.25571 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=8.059 mas, bpa=2.386 degrees ! Estimated noise=1992.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199254 Jy ! Component: 100 - total flux cleaned = 0.251064 Jy ! Component: 150 - total flux cleaned = 0.27318 Jy ! Component: 200 - total flux cleaned = 0.285905 Jy ! Total flux subtracted in 200 components = 0.285905 Jy ! Clean residual min=-0.006707 max=0.007630 Jy/beam ! Clean residual mean=-0.000027 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 0.285905 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.285905 Jy ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.18 mas, bpa=2.294 degrees ! Estimated noise=1260.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112036 Jy ! Component: 100 - total flux cleaned = 0.0167959 Jy ! Component: 150 - total flux cleaned = 0.0187469 Jy ! Component: 200 - total flux cleaned = 0.0199208 Jy ! Total flux subtracted in 200 components = 0.0199208 Jy ! Clean residual min=-0.003206 max=0.003253 Jy/beam ! Clean residual mean=-0.000014 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.305826 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 81 components and 0.305826 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.573 mas, bmaj=25.88 mas, bpa=1.081 degrees ! Estimated noise=1503.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186435 Jy ! Component: 100 - total flux cleaned = 0.0021378 Jy ! Component: 150 - total flux cleaned = 0.00206455 Jy ! Component: 200 - total flux cleaned = 0.00206383 Jy ! Total flux subtracted in 200 components = 0.00206383 Jy ! Clean residual min=-0.003176 max=0.002712 Jy/beam ! Clean residual mean=-0.000007 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.30789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.14361e-06 Jy ! Component: 100 - total flux cleaned = 2.98071e-06 Jy ! Component: 150 - total flux cleaned = 3.02394e-06 Jy ! Component: 200 - total flux cleaned = 5.8219e-06 Jy ! Total flux subtracted in 200 components = 5.8219e-06 Jy ! Clean residual min=-0.003190 max=0.002511 Jy/beam ! Clean residual mean=-0.000005 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.307896 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 109 components and 0.307896 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.18 mas, bpa=2.294 degrees ! Estimated noise=1260.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000788048 Jy ! Component: 100 - total flux cleaned = -0.000926635 Jy ! Component: 150 - total flux cleaned = -0.000983658 Jy ! Component: 200 - total flux cleaned = -0.000982462 Jy ! Total flux subtracted in 200 components = -0.000982462 Jy ! Clean residual min=-0.002851 max=0.002798 Jy/beam ! Clean residual mean=-0.000006 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.306913 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.306913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133520Jy sigma=0.000659 ! Fit after self-cal, rms=0.133495Jy sigma=0.000659 wmodel J2121-3703_S_2017_02_24_pus_map.mod ! Writing 132 model components to file: J2121-3703_S_2017_02_24_pus_map.mod wobs J2121-3703_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J2121-3703_S_2017_02_24_pus_uvs.fits wwins J2121-3703_S_2017_02_24_pus_map.win ! wwins: Wrote 4 windows to J2121-3703_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136348 Jy ! Component: 100 - total flux cleaned = 4.82366e-05 Jy ! Component: 150 - total flux cleaned = -7.66889e-05 Jy ! Component: 200 - total flux cleaned = -0.000156607 Jy ! Component: 250 - total flux cleaned = -0.000273789 Jy ! Component: 300 - total flux cleaned = -0.000424035 Jy ! Component: 350 - total flux cleaned = -0.000461357 Jy ! Component: 400 - total flux cleaned = -0.000497155 Jy ! Component: 450 - total flux cleaned = -0.000497577 Jy ! Component: 500 - total flux cleaned = -0.000497577 Jy ! Component: 550 - total flux cleaned = -0.000563318 Jy ! Component: 600 - total flux cleaned = -0.000595349 Jy ! Component: 650 - total flux cleaned = -0.000563552 Jy ! Component: 700 - total flux cleaned = -0.000594498 Jy ! Component: 750 - total flux cleaned = -0.000715203 Jy ! Component: 800 - total flux cleaned = -0.000744845 Jy ! Component: 850 - total flux cleaned = -0.000773796 Jy ! Component: 900 - total flux cleaned = -0.00083117 Jy ! Component: 950 - total flux cleaned = -0.00094387 Jy ! Component: 1000 - total flux cleaned = -0.00094395 Jy ! Component: 1050 - total flux cleaned = -0.000998526 Jy ! Component: 1100 - total flux cleaned = -0.00102512 Jy ! Component: 1150 - total flux cleaned = -0.00113108 Jy ! Component: 1200 - total flux cleaned = -0.00115672 Jy ! Component: 1250 - total flux cleaned = -0.00115713 Jy ! Component: 1300 - total flux cleaned = -0.00128383 Jy ! Component: 1350 - total flux cleaned = -0.0013338 Jy ! Component: 1400 - total flux cleaned = -0.00140804 Jy ! Component: 1450 - total flux cleaned = -0.00140826 Jy ! Component: 1500 - total flux cleaned = -0.00150483 Jy ! Component: 1550 - total flux cleaned = -0.00150524 Jy ! Component: 1600 - total flux cleaned = -0.00152916 Jy ! Component: 1650 - total flux cleaned = -0.00155248 Jy ! Component: 1700 - total flux cleaned = -0.00155248 Jy ! Component: 1750 - total flux cleaned = -0.0016205 Jy ! Component: 1800 - total flux cleaned = -0.00155344 Jy ! Component: 1850 - total flux cleaned = -0.00155359 Jy ! Component: 1900 - total flux cleaned = -0.00161939 Jy ! Component: 1950 - total flux cleaned = -0.00155403 Jy ! Component: 2000 - total flux cleaned = -0.00148954 Jy ! Component: 2050 - total flux cleaned = -0.00140471 Jy ! Component: 2100 - total flux cleaned = -0.00144685 Jy ! Component: 2150 - total flux cleaned = -0.00146777 Jy ! Component: 2200 - total flux cleaned = -0.00144698 Jy ! Component: 2250 - total flux cleaned = -0.00142664 Jy ! Component: 2300 - total flux cleaned = -0.00144701 Jy ! Component: 2350 - total flux cleaned = -0.00140656 Jy ! Component: 2400 - total flux cleaned = -0.00136655 Jy ! Component: 2450 - total flux cleaned = -0.00132706 Jy ! Component: 2500 - total flux cleaned = -0.00128795 Jy ! Component: 2550 - total flux cleaned = -0.00130707 Jy ! Component: 2600 - total flux cleaned = -0.00124907 Jy ! Component: 2650 - total flux cleaned = -0.00115352 Jy ! Component: 2700 - total flux cleaned = -0.00113464 Jy ! Component: 2750 - total flux cleaned = -0.00109699 Jy ! Component: 2800 - total flux cleaned = -0.00102265 Jy ! Component: 2850 - total flux cleaned = -0.000930369 Jy ! Component: 2900 - total flux cleaned = -0.000838909 Jy ! Component: 2950 - total flux cleaned = -0.000802845 Jy ! Component: 3000 - total flux cleaned = -0.000784866 Jy ! Component: 3050 - total flux cleaned = -0.000748968 Jy ! Component: 3100 - total flux cleaned = -0.000677989 Jy ! Component: 3150 - total flux cleaned = -0.000572473 Jy ! Component: 3200 - total flux cleaned = -0.000520231 Jy ! Component: 3250 - total flux cleaned = -0.00046833 Jy ! Component: 3300 - total flux cleaned = -0.000399477 Jy ! Component: 3350 - total flux cleaned = -0.000331085 Jy ! Component: 3400 - total flux cleaned = -0.000246511 Jy ! Component: 3450 - total flux cleaned = -0.000246384 Jy ! Component: 3500 - total flux cleaned = -0.000196199 Jy ! Component: 3550 - total flux cleaned = -0.00011342 Jy ! Component: 3600 - total flux cleaned = -0.000146309 Jy ! Component: 3650 - total flux cleaned = -0.000113486 Jy ! Component: 3700 - total flux cleaned = -8.10835e-05 Jy ! Component: 3750 - total flux cleaned = -3.28672e-05 Jy ! Component: 3800 - total flux cleaned = 1.51525e-05 Jy ! Component: 3850 - total flux cleaned = 3.11601e-05 Jy ! Component: 3900 - total flux cleaned = 0.000110047 Jy ! Component: 3950 - total flux cleaned = 9.44911e-05 Jy ! Component: 4000 - total flux cleaned = 0.000203349 Jy ! Component: 4050 - total flux cleaned = 0.000172599 Jy ! Total flux subtracted in 4096 components = 0.000234018 Jy ! Clean residual min=-0.000853 max=0.001088 Jy/beam ! Clean residual mean=0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.307147 Jy keep ! Adding 276 model components to the UV plane model. ! The established model now contains 408 components and 0.307147 Jy ![Exited script file: muppet] wmap "J2121-3703_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.18 at 2.294 degrees (North through East) ! Clean map min=-0.0049512 max=0.25683 Jy/beam ! Writing clean map to FITS file: J2121-3703_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.256834 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000285492 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.333474 0.333474 0.666948 1.3339 2.66779 5.33559 10.6712 21.3423 42.6847 85.3694 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.18 at 2.294 degrees (North through East) ! Clean map min=-0.0049512 max=0.25683 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2121-3703_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:35:42 2019