! Started logfile: J2121-2628_S_2017_10_21_pus_uvs.log on Sat May 11 21:06:48 2019 obs J2121-2628_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J2121-2628_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.496528 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2121-2628 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2121-2628_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 621 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 576 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 846 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.008589Jy sigma=0.007976 ! Fit after self-cal, rms=0.949237Jy sigma=0.007513 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.541 mas, bmaj=16.45 mas, bpa=-18.02 degrees ! Estimated noise=1380.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04292 Jy ! Component: 100 - total flux cleaned = 0.0528856 Jy ! Total flux subtracted in 100 components = 0.0528856 Jy ! Clean residual min=-0.005765 max=0.005063 Jy/beam ! Clean residual mean=-0.000028 rms=0.001352 Jy/beam ! Combined flux in latest and established models = 0.0528856 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0528856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105153Jy sigma=0.000743 ! Fit after self-cal, rms=0.103785Jy sigma=0.000731 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.21 mas, bmaj=18.59 mas, bpa=-17.83 degrees ! Estimated noise=1044.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532247 Jy ! Component: 100 - total flux cleaned = 0.00763378 Jy ! Component: 150 - total flux cleaned = 0.00852223 Jy ! Component: 200 - total flux cleaned = 0.00877017 Jy ! Total flux subtracted in 200 components = 0.00877017 Jy ! Clean residual min=-0.005493 max=0.003979 Jy/beam ! Clean residual mean=-0.000042 rms=0.001266 Jy/beam ! Combined flux in latest and established models = 0.0616557 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 23 components and 0.0616557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103457Jy sigma=0.000729 ! Fit after self-cal, rms=0.103393Jy sigma=0.000729 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.23 HN 0.97 KP 0.90 ! LA 0.99 MK 1.09 NL 1.02 OV 1.12 ! PT 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 0.83 KP 1.11 ! LA 1.06 MK 1.07 NL 1.11 OV 1.26 ! PT 0.79 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.85 KP 1.20 ! LA 0.91 MK 1.06 NL 1.18 OV 1.06 ! PT 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.82 KP 1.00* ! LA 0.83 MK 0.76 NL 1.00* OV 1.00* ! PT 0.87 ! ! ! Fit before self-cal, rms=0.103393Jy sigma=0.000729 ! Fit after self-cal, rms=0.098165Jy sigma=0.000723 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=18.42 mas, bpa=-17.55 degrees ! Estimated noise=1037.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119179 Jy ! Component: 100 - total flux cleaned = 0.00122762 Jy ! Component: 150 - total flux cleaned = 0.00119991 Jy ! Component: 200 - total flux cleaned = 0.00117411 Jy ! Total flux subtracted in 200 components = 0.00117411 Jy ! Clean residual min=-0.002900 max=0.003666 Jy/beam ! Clean residual mean=0.000012 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0628298 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0628298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098142Jy sigma=0.000723 ! Fit after self-cal, rms=0.098468Jy sigma=0.000721 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098468Jy sigma=0.000721 ! Fit after self-cal, rms=0.100409Jy sigma=0.000718 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=18.35 mas, bpa=-17.41 degrees ! Estimated noise=1058.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115503 Jy ! Component: 100 - total flux cleaned = 0.00138945 Jy ! Component: 150 - total flux cleaned = 0.00146757 Jy ! Component: 200 - total flux cleaned = 0.00151447 Jy ! Total flux subtracted in 200 components = 0.00151447 Jy ! Clean residual min=-0.002660 max=0.003401 Jy/beam ! Clean residual mean=0.000001 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.0643443 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0643443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100384Jy sigma=0.000718 ! Fit after self-cal, rms=0.100802Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-126, 56). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019988 Jy ! Component: 100 - total flux cleaned = 0.00199887 Jy ! Component: 150 - total flux cleaned = 0.0020977 Jy ! Component: 200 - total flux cleaned = 0.00232362 Jy ! Total flux subtracted in 200 components = 0.00232362 Jy ! Clean residual min=-0.002587 max=0.003120 Jy/beam ! Clean residual mean=-0.000003 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.0666679 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.0666679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100688Jy sigma=0.000716 ! Fit after self-cal, rms=0.100672Jy sigma=0.000715 ! Inverting map ! Added new window around map position (-8, -83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251025 Jy ! Component: 100 - total flux cleaned = 0.0035518 Jy ! Component: 150 - total flux cleaned = 0.00408117 Jy ! Component: 200 - total flux cleaned = 0.00465535 Jy ! Total flux subtracted in 200 components = 0.00465535 Jy ! Clean residual min=-0.002437 max=0.002174 Jy/beam ! Clean residual mean=-0.000006 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.0713233 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.0713233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100519Jy sigma=0.000714 ! Fit after self-cal, rms=0.100555Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100555Jy sigma=0.000714 ! Fit after self-cal, rms=0.102114Jy sigma=0.000712 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=18.39 mas, bpa=-17.27 degrees ! Estimated noise=1051.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022526 Jy ! Component: 100 - total flux cleaned = 0.00246133 Jy ! Component: 150 - total flux cleaned = 0.00275767 Jy ! Component: 200 - total flux cleaned = 0.00292096 Jy ! Total flux subtracted in 200 components = 0.00292096 Jy ! Clean residual min=-0.002121 max=0.001971 Jy/beam ! Clean residual mean=-0.000011 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0742442 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 106 components and 0.0742442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102019Jy sigma=0.000712 ! Fit after self-cal, rms=0.102372Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123033 Jy ! Component: 100 - total flux cleaned = 0.00123543 Jy ! Component: 150 - total flux cleaned = 0.00144432 Jy ! Component: 200 - total flux cleaned = 0.00178131 Jy ! Total flux subtracted in 200 components = 0.00178131 Jy ! Clean residual min=-0.002149 max=0.001905 Jy/beam ! Clean residual mean=-0.000011 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0760256 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 119 components and 0.0760256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102301Jy sigma=0.000711 ! Fit after self-cal, rms=0.102324Jy sigma=0.000711 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102324Jy sigma=0.000711 ! Fit after self-cal, rms=0.104164Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.212 mas, bmaj=32.71 mas, bpa=-6.199 degrees ! Estimated noise=1258.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000634789 Jy ! Component: 100 - total flux cleaned = 0.000597572 Jy ! Component: 150 - total flux cleaned = 0.000528365 Jy ! Component: 200 - total flux cleaned = 0.000381432 Jy ! Total flux subtracted in 200 components = 0.000381432 Jy ! Clean residual min=-0.002037 max=0.001958 Jy/beam ! Clean residual mean=-0.000015 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.076407 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 149 components and 0.076407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104147Jy sigma=0.000710 ! Fit after self-cal, rms=0.104330Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526275 Jy ! Component: 100 - total flux cleaned = 0.000426218 Jy ! Component: 150 - total flux cleaned = 0.000277132 Jy ! Component: 200 - total flux cleaned = 0.000168824 Jy ! Total flux subtracted in 200 components = 0.000168824 Jy ! Clean residual min=-0.002237 max=0.002033 Jy/beam ! Clean residual mean=-0.000015 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0765758 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 169 components and 0.0765758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104311Jy sigma=0.000710 ! Fit after self-cal, rms=0.104321Jy sigma=0.000710 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=18.43 mas, bpa=-17.26 degrees ! Estimated noise=1053.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 18.43 at -17.26 degrees (North through East) ! Clean map min=-0.0040912 max=0.054016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=16.22 mas, bpa=-17.37 degrees ! Estimated noise=1381.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421651 Jy ! Component: 100 - total flux cleaned = 0.0536415 Jy ! Component: 150 - total flux cleaned = 0.0609683 Jy ! Component: 200 - total flux cleaned = 0.0656057 Jy ! Total flux subtracted in 200 components = 0.0656057 Jy ! Clean residual min=-0.004004 max=0.004502 Jy/beam ! Clean residual mean=-0.000023 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.0656058 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0656058 Jy ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=18.43 mas, bpa=-17.26 degrees ! Estimated noise=1053.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446337 Jy ! Component: 100 - total flux cleaned = 0.00539311 Jy ! Component: 150 - total flux cleaned = 0.00591025 Jy ! Component: 200 - total flux cleaned = 0.00658376 Jy ! Total flux subtracted in 200 components = 0.00658376 Jy ! Clean residual min=-0.002737 max=0.002413 Jy/beam ! Clean residual mean=-0.000025 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0721895 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 59 components and 0.0721895 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.212 mas, bmaj=32.71 mas, bpa=-6.199 degrees ! Estimated noise=1258.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767166 Jy ! Component: 100 - total flux cleaned = 0.000774171 Jy ! Component: 150 - total flux cleaned = 0.000840032 Jy ! Component: 200 - total flux cleaned = 0.000896057 Jy ! Total flux subtracted in 200 components = 0.000896057 Jy ! Clean residual min=-0.002627 max=0.002118 Jy/beam ! Clean residual mean=-0.000028 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0730856 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000154011 Jy ! Component: 100 - total flux cleaned = 0.000289314 Jy ! Component: 150 - total flux cleaned = 0.000369194 Jy ! Component: 200 - total flux cleaned = 0.000596314 Jy ! Total flux subtracted in 200 components = 0.000596314 Jy ! Clean residual min=-0.002556 max=0.002123 Jy/beam ! Clean residual mean=-0.000017 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0736819 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 122 components and 0.0736819 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.16 mas, bmaj=18.43 mas, bpa=-17.26 degrees ! Estimated noise=1053.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000682362 Jy ! Component: 100 - total flux cleaned = 0.00102043 Jy ! Component: 150 - total flux cleaned = 0.00126352 Jy ! Component: 200 - total flux cleaned = 0.00149022 Jy ! Total flux subtracted in 200 components = 0.00149022 Jy ! Clean residual min=-0.002177 max=0.001930 Jy/beam ! Clean residual mean=-0.000010 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0751721 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 144 components and 0.0751721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104352Jy sigma=0.000710 ! Fit after self-cal, rms=0.104404Jy sigma=0.000710 wmodel J2121-2628_S_2017_10_21_pus_map.mod ! Writing 144 model components to file: J2121-2628_S_2017_10_21_pus_map.mod wobs J2121-2628_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J2121-2628_S_2017_10_21_pus_uvs.fits wwins J2121-2628_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J2121-2628_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00085195 Jy ! Component: 100 - total flux cleaned = -0.00102801 Jy ! Component: 150 - total flux cleaned = -0.00112792 Jy ! Component: 200 - total flux cleaned = -0.00125399 Jy ! Component: 250 - total flux cleaned = -0.00143525 Jy ! Component: 300 - total flux cleaned = -0.00166658 Jy ! Component: 350 - total flux cleaned = -0.00186305 Jy ! Component: 400 - total flux cleaned = -0.0019451 Jy ! Component: 450 - total flux cleaned = -0.00205092 Jy ! Component: 500 - total flux cleaned = -0.00207672 Jy ! Component: 550 - total flux cleaned = -0.0022023 Jy ! Component: 600 - total flux cleaned = -0.00227551 Jy ! Component: 650 - total flux cleaned = -0.00241871 Jy ! Component: 700 - total flux cleaned = -0.0025819 Jy ! Component: 750 - total flux cleaned = -0.00274217 Jy ! Component: 800 - total flux cleaned = -0.00283162 Jy ! Component: 850 - total flux cleaned = -0.00291993 Jy ! Component: 900 - total flux cleaned = -0.00305034 Jy ! Component: 950 - total flux cleaned = -0.00317848 Jy ! Component: 1000 - total flux cleaned = -0.00330436 Jy ! Component: 1050 - total flux cleaned = -0.00340787 Jy ! Component: 1100 - total flux cleaned = -0.00350973 Jy ! Component: 1150 - total flux cleaned = -0.00363042 Jy ! Component: 1200 - total flux cleaned = -0.00376934 Jy ! Component: 1250 - total flux cleaned = -0.00378909 Jy ! Component: 1300 - total flux cleaned = -0.00392464 Jy ! Component: 1350 - total flux cleaned = -0.00403882 Jy ! Component: 1400 - total flux cleaned = -0.00415172 Jy ! Component: 1450 - total flux cleaned = -0.00426285 Jy ! Component: 1500 - total flux cleaned = -0.00435458 Jy ! Component: 1550 - total flux cleaned = -0.00446336 Jy ! Component: 1600 - total flux cleaned = -0.00453513 Jy ! Component: 1650 - total flux cleaned = -0.00467649 Jy ! Component: 1700 - total flux cleaned = -0.00476384 Jy ! Component: 1750 - total flux cleaned = -0.00488445 Jy ! Component: 1800 - total flux cleaned = -0.0049186 Jy ! Component: 1850 - total flux cleaned = -0.00498619 Jy ! Component: 1900 - total flux cleaned = -0.00510321 Jy ! Component: 1950 - total flux cleaned = -0.00520189 Jy ! Component: 2000 - total flux cleaned = -0.00531588 Jy ! Component: 2050 - total flux cleaned = -0.00538038 Jy ! Component: 2100 - total flux cleaned = -0.0055239 Jy ! Component: 2150 - total flux cleaned = -0.00552401 Jy ! Component: 2200 - total flux cleaned = -0.00563377 Jy ! Component: 2250 - total flux cleaned = -0.00571118 Jy ! Component: 2300 - total flux cleaned = -0.00574179 Jy ! Component: 2350 - total flux cleaned = -0.00580261 Jy ! Component: 2400 - total flux cleaned = -0.00586264 Jy ! Component: 2450 - total flux cleaned = -0.00590725 Jy ! Component: 2500 - total flux cleaned = -0.00596623 Jy ! Component: 2550 - total flux cleaned = -0.00598065 Jy ! Component: 2600 - total flux cleaned = -0.00603822 Jy ! Component: 2650 - total flux cleaned = -0.00608123 Jy ! Component: 2700 - total flux cleaned = -0.00612363 Jy ! Component: 2750 - total flux cleaned = -0.0061658 Jy ! Component: 2800 - total flux cleaned = -0.00620754 Jy ! Component: 2850 - total flux cleaned = -0.00623522 Jy ! Component: 2900 - total flux cleaned = -0.00626246 Jy ! Component: 2950 - total flux cleaned = -0.00626238 Jy ! Component: 3000 - total flux cleaned = -0.00623553 Jy ! Component: 3050 - total flux cleaned = -0.00626232 Jy ! Component: 3100 - total flux cleaned = -0.00627556 Jy ! Component: 3150 - total flux cleaned = -0.00624911 Jy ! Component: 3200 - total flux cleaned = -0.00617092 Jy ! Component: 3250 - total flux cleaned = -0.00622277 Jy ! Component: 3300 - total flux cleaned = -0.00615844 Jy ! Component: 3350 - total flux cleaned = -0.006171 Jy ! Component: 3400 - total flux cleaned = -0.00617109 Jy ! Component: 3450 - total flux cleaned = -0.00617109 Jy ! Component: 3500 - total flux cleaned = -0.00612126 Jy ! Component: 3550 - total flux cleaned = -0.00615856 Jy ! Component: 3600 - total flux cleaned = -0.00618322 Jy ! Component: 3650 - total flux cleaned = -0.00614658 Jy ! Component: 3700 - total flux cleaned = -0.0061467 Jy ! Component: 3750 - total flux cleaned = -0.00613473 Jy ! Component: 3800 - total flux cleaned = -0.00608671 Jy ! Component: 3850 - total flux cleaned = -0.00611061 Jy ! Component: 3900 - total flux cleaned = -0.0060869 Jy ! Component: 3950 - total flux cleaned = -0.00606326 Jy ! Component: 4000 - total flux cleaned = -0.0060633 Jy ! Component: 4050 - total flux cleaned = -0.00605159 Jy ! Total flux subtracted in 4096 components = -0.00600516 Jy ! Clean residual min=-0.000646 max=0.000603 Jy/beam ! Clean residual mean=-0.000003 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.069167 Jy keep ! Adding 252 model components to the UV plane model. ! The established model now contains 395 components and 0.069167 Jy ![Exited script file: muppet] wmap "J2121-2628_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 18.43 at -17.26 degrees (North through East) ! Clean map min=-0.003673 max=0.053794 Jy/beam ! Writing clean map to FITS file: J2121-2628_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0537936 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000216308 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.20632 1.20632 2.41264 4.82528 9.65055 19.3011 38.6022 77.2044 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.053 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.16 x 18.43 at -17.26 degrees (North through East) ! Clean map min=-0.003673 max=0.053794 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J2121-2628_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:06:53 2019